Hello everybody!
I recently got my Pipo M9 3G tablet, really nice tablet actually.
As I always do, I flashed my tablet with a custom rom, but accidently flashed it with a Pipo M9 PRO rom.
The difference between M9 and M9 PRO is that PRO has a 1920x1080 screen, while the M9 have 1280x720.
The tablet didnt start, ofc, and I realised I flashed the wrong firmware. So I downloaded the right one, flashed it, and got the tablet to boot.
But now, my touchscreen is inverted, and also only responsive on about 1/3 of the left part of the screen.
If you look at my video here, you'll know that I mean:
youtube.com/watch?v=8IY0lCV8Eng (cant post the real link since I havent made 10 posts yet)
I contacted Pipo about it, and they sent me some new firmwares to try, but I never got it to work correctly.
They then gave me the option to pay 70$ to send it to them for them to fix it, but as the touchscreen itself isnt really broken I thought I'd turn to you guys first to see if anyone may have the answer to my problems.
I'd like to believe it has something to do with the drivers for the touchscreen, but as my knowledge about android isnt THAT good, I may be completely wrong.
All help is appreciated! Thanks in advance.
No one got any idea? :/
hello
I have the same problem as you may be with an pipo m9 pro 3g.
I accidently flashed it with a Pipo M9 rom
I want to know if you have solved the problem
thank's
Related
hello all,
i just want to ask if somebody else haveexperienced a problem with the touch screen on their xda.
i notice that after a two weeks of use the bottom middle area where the input panel appears suffers from sensitivity issue. anyone had this problem?
I had my first unit changed for a brand ne unit, im now having the same problem again with the new one.
i dont think that there is something wrong with the wieght im using when writing on the screen, i still have my 3870, old hp548 and e200 with me, and i never had this problem.
thank you for your input.
cvsoft
[email protected]
Hello,
I own a STAR G9000 phone, which is also known as STAR Kingelon. After playing a bit with it i decided i'll upgrade my 4.2.2 Android to 4.4.2, and decided to do a bit of research which resulted in finding a ROM etc. Once doing so i used the SPFlashTool v.5.1408.00, followed instructions, and everything went well without any problems. I decided to turn on phone and....
Rom worked, i could hear sounds etc. screen reacts to touch, but this is how screen looks (see attachment)
After this i tried a lot of different ROMs, some worked some not, but in the end the problem was the screen, always pixelated like this. Anyone has an idea what might cause this problem? I tried default stock ROM as well, but in the end it looked like that.
I'd appreciate any answer, or tips of what to do or not.
Peace.
someone who solve it please?
I think we're screwed... however if you find anything, let me know!
Michel
i have the same problem
i have the same problem i think is a screen controller, why? because the ROM we install maybe has a different screen controller.
if you could fix this let me know this is my email [email protected]
greetings.
someone
someone solve this problem?
star g9000 lcd driver to change
rurrito said:
someone solve this problem?
Click to expand...
Click to collapse
you have to change lcd driver you need RX_52R_1051A use SP_Multiport_Download_3.1344.00.00 (it is easy)
good luck
Hello everyone
I explain my problem.
I bought it a few Blacview Zeta, this phone encountered problems with the GPS and network reception problems.
I thought, "How bad idea" that I went searching on the internet an official rom to see if the problems could beings corrected.
I went to the official website of BlackView then I followed a link to download the rom.
While Roma are available on their official forum, so I download with confidence, I flash the phone, I restarts the phone and then surprise the display is illuminated but a black screen with vertical and horizontal lines.
The phone responds well to touch and hear different sound when you click on the screen. But we see nothing except the lines.
So I posted on the forum, but none of my posts do appear, I send messages directly to the contacts available on the official website no answers.
So I searched the internet for several days so I found other Roma.
I found three different rom a v0.5 and a v0.6 v0.7 but the problem remains the same at the screen.
I also saw the other person have the same problem as me, but she did not find one solution.
To me it seems that this is a graphic driver problem, a hardware modification to the model to be made that I own.
So I'm looking desperately this rom "S509_G3_Blackview_Zeta_V1.2_20160309" which is the one that corresponds to my phone.
I know my message is long, but I tried to explain to me the best.
Anyway thank you to everyone who can help me
sincerely Vincent
seven00766 said:
Hello everyone
I explain my problem.
I bought it a few Blacview Zeta, this phone encountered problems with the GPS and network reception problems.
I thought, "How bad idea" that I went searching on the internet an official rom to see if the problems could beings corrected.
I went to the official website of BlackView then I followed a link to download the rom.
While Roma are available on their official forum, so I download with confidence, I flash the phone, I restarts the phone and then surprise the display is illuminated but a black screen with vertical and horizontal lines.
The phone responds well to touch and hear different sound when you click on the screen. But we see nothing except the lines.
So I posted on the forum, but none of my posts do appear, I send messages directly to the contacts available on the official website no answers.
So I searched the internet for several days so I found other Roma.
I found three different rom a v0.5 and a v0.6 v0.7 but the problem remains the same at the screen.
I also saw the other person have the same problem as me, but she did not find one solution.
To me it seems that this is a graphic driver problem, a hardware modification to the model to be made that I own.
So I'm looking desperately this rom "S509_G3_Blackview_Zeta_V1.2_20160309" which is the one that corresponds to my phone.
I know my message is long, but I tried to explain to me the best.
Anyway thank you to everyone who can help me
sincerely Vincent
Click to expand...
Click to collapse
Hello
my position is still relevant, I am still waiting for a solution.
Thank you to all
seven00766 said:
Hello everyone
I explain my problem.
I bought it a few Blacview Zeta, this phone encountered problems with the GPS and network reception problems.
I thought, "How bad idea" that I went searching on the internet an official rom to see if the problems could beings corrected.
I went to the official website of BlackView then I followed a link to download the rom.
While Roma are available on their official forum, so I download with confidence, I flash the phone, I restarts the phone and then surprise the display is illuminated but a black screen with vertical and horizontal lines.
The phone responds well to touch and hear different sound when you click on the screen. But we see nothing except the lines.
So I posted on the forum, but none of my posts do appear, I send messages directly to the contacts available on the official website no answers.
So I searched the internet for several days so I found other Roma.
I found three different rom a v0.5 and a v0.6 v0.7 but the problem remains the same at the screen.
I also saw the other person have the same problem as me, but she did not find one solution.
To me it seems that this is a graphic driver problem, a hardware modification to the model to be made that I own.
So I'm looking desperately this rom "S509_G3_Blackview_Zeta_V1.2_20160309" which is the one that corresponds to my phone.
I know my message is long, but I tried to explain to me the best.
Anyway thank you to everyone who can help me
sincerely Vincent
Click to expand...
Click to collapse
Well coming back to you I found a ROM that matches my Zeta.
In made there are two versions of Zeta normal and V16, V16 I am..
Except that the rom that I found can be returned to the phone with "easy TRWP" I understand the procedure except that it must enable the USB debugging, but as I see absolutely nothing on the screen I can not activate it.
I know if a developer can do something with this rom so I can flash it with spflashtool?
I put a link is on my personal server that contains the rom.
I sincerely hope that someone finds a solution for me.
Because my skills are not sufficient to do something with this rom.
Thank you
Link :http://88.167.54.40:31796/share/M5neJI2eTFzDs7Yk/
seven00766 said:
Hello everyone
I explain my problem.
I bought it a few Blacview Zeta, this phone encountered problems with the GPS and network reception problems.
I thought, "How bad idea" that I went searching on the internet an official rom to see if the problems could beings corrected.
I went to the official website of BlackView then I followed a link to download the rom.
While Roma are available on their official forum, so I download with confidence, I flash the phone, I restarts the phone and then surprise the display is illuminated but a black screen with vertical and horizontal lines.
The phone responds well to touch and hear different sound when you click on the screen. But we see nothing except the lines.
So I posted on the forum, but none of my posts do appear, I send messages directly to the contacts available on the official website no answers.
So I searched the internet for several days so I found other Roma.
I found three different rom a v0.5 and a v0.6 v0.7 but the problem remains the same at the screen.
I also saw the other person have the same problem as me, but she did not find one solution.
To me it seems that this is a graphic driver problem, a hardware modification to the model to be made that I own.
So I'm looking desperately this rom "S509_G3_Blackview_Zeta_V1.2_20160309" which is the one that corresponds to my phone.
I know my message is long, but I tried to explain to me the best.
Anyway thank you to everyone who can help me
sincerely Vincent
Click to expand...
Click to collapse
well my problem is solved thanks to this forum http://www.htcmania.com/showthread.php?p=24006863#post24006863
thank you all anyway
Hi, people. I have a really strange problem with the touch panel of my Xiaomi Redmi Note 3 PRO(SD) and I hope someone could help me. I really appreciate any idea. This is the problem. After a bootloop I tried the testpoint method and break something of the touch digitizer so I had to buy another touch digitizer+LCD. The problem was that, even after flashing all kind of official firmware for kenzo (Stable and dev, even CM13 official), the touch is lees responsive. I thought it was the replacement and I bought another one but, after changing it again, the problem persist. I saw in forums that a similar problem was on the Xiaomi Mi3 after MIUI V6 update so I Hope that it is a software problem, but it's really strange. Even on TWRP and CM13 Official the less responsive touch is present. In the CIT menu, the touch panel test fail saying "No data" This make this beast feels like a bad phone and I really hope someone could help me. Thank you!
Here is the touch problem:
https://www.youtube.com/watch?v=4RlHSfxKuSY
I suggest you to try custom kernel if it still persists it might be hardware problem.
I have this tablet from my Nephew to fix, he's just bought it and the firmware was freezing whenever anything ran on it. I Flashed it with a very similar FW, now there's no touchscreen, and although before everything made it freeze, the touchscreen was working. I've tried tens of firmwares, some work, some don't, but none of them fixes the touchscreen. If I use a mouse on it, everything works like a charm, and relatively fast too. I kinda gave up on finding a firmware because I've tried so many, I was wondering if there is a way I could install only the touchscreen drivers since everything else works in 3 of the firmwares I found.
Any help is appreciated, my nephew will be very grateful.
Brand: Larinos (never heard of before)
Model: Br2020
Allwinner A33
Board: tzx-733Q a1 (I've found many with the same code, except the "a1", but no luck with any of them
1gb Ram
16gb Rom
Touchscreen chip: cst21680 se - 003131907
wjuniorbr said:
I have this tablet from my Nephew to fix, he's just bought it and the firmware was freezing whenever anything ran on it. I Flashed it with a very similar FW, now there's no touchscreen, and although before everything made it freeze, the touchscreen was working. I've tried tens of firmwares, some work, some don't, but none of them fixes the touchscreen. If I use a mouse on it, everything works like a charm, and relatively fast too. I kinda gave up on finding a firmware because I've tried so many, I was wondering if there is a way I could install only the touchscreen drivers since everything else works in 3 of the firmwares I found.
Any help is appreciated, my nephew will be very grateful.
Brand: Larinos (never heard of before)
Model: Br2020
Allwinner A33
Board: tzx-733Q a1 (I've found many with the same code, except the "a1", but no luck with any of them
1gb Ram
16gb Rom
Touchscreen chip: cst21680 se - 003131907
Click to expand...
Click to collapse
A work around might be a otg cable and a USB keyboard\mouse @ least till you find what you need
TheMadScientist said:
A work around might be a otg cable and a USB keyboard\mouse @ least till you find what you need
Click to expand...
Click to collapse
That`s what I`m doing to test it, and it works, but this is for my 6yo nephew, I need the touchscreen for him.
wjuniorbr said:
That`s what I`m doing to test it, and it works, but this is for my 6yo nephew, I need the touchscreen for him.
Click to expand...
Click to collapse
On a lot of these no name or small name brands. It's nearly impossible to find em. I got a Nextbook and my firmware is all out of whack. The rotation is of 90 degrees. I ended up buying a second one to rip the firmware from and fix the first. Might be another option
TheMadScientist said:
On a lot of these no name or small name brands. It's nearly impossible to find em. I got a Nextbook and my firmware is all out of whack. The rotation is of 90 degrees. I ended up buying a second one to rip the firmware from and fix the first. Might be another option
Click to expand...
Click to collapse
In this case I don't think I will buy another one just to fix it, and I surely won't know anyone who has one of the same brand, but even if I did, I might not work, because although in the original firmware everything (including the touchscreen) was working, it kept freezing whenever I opened anything, the same might happen again