Hello,
I own a STAR G9000 phone, which is also known as STAR Kingelon. After playing a bit with it i decided i'll upgrade my 4.2.2 Android to 4.4.2, and decided to do a bit of research which resulted in finding a ROM etc. Once doing so i used the SPFlashTool v.5.1408.00, followed instructions, and everything went well without any problems. I decided to turn on phone and....
Rom worked, i could hear sounds etc. screen reacts to touch, but this is how screen looks (see attachment)
After this i tried a lot of different ROMs, some worked some not, but in the end the problem was the screen, always pixelated like this. Anyone has an idea what might cause this problem? I tried default stock ROM as well, but in the end it looked like that.
I'd appreciate any answer, or tips of what to do or not.
Peace.
someone who solve it please?
I think we're screwed... however if you find anything, let me know!
Michel
i have the same problem
i have the same problem i think is a screen controller, why? because the ROM we install maybe has a different screen controller.
if you could fix this let me know this is my email [email protected]
greetings.
someone
someone solve this problem?
star g9000 lcd driver to change
rurrito said:
someone solve this problem?
Click to expand...
Click to collapse
you have to change lcd driver you need RX_52R_1051A use SP_Multiport_Download_3.1344.00.00 (it is easy)
good luck
Related
Since a week ago I'm having a strange problem. Bottom part of my screen doesn't respond well to touch input. I think its kind of out of calibration or is it broken? Does anyone else have this problem?
I've installed several ROMs but all of them have the same problem. Is my Hero dying?
This is a well documented problem. Try searching the forum for the related posts.
Thanks. Unfortunately I couldnt find exact answer to my question.
Would you please be kind enough to give me a link to the solution?
http://forum.xda-developers.com/showthread.php?t=595485
OK. Thanks man. I guess I have problem. Here there is no official HTC center so I guess I have to deal with it. For thos in my condition, The original HTC keyboard works the best for me and with it I have little to no problem unlike default Android keyboard.
I had the same problem before.
But without a service center, you are out of luck.
Maybe try those DIY guides they have on fixing this problem.
Dear support team,
i had a serious problem in my device galaxy mega 6.3 I9205
after i flashed the CM11 custom rom of android kit kat 4.4.2 on my device
i faced a serious problem, that the screen go black while a phone call is in progress,
and there is no way to light up the screen except after ending the call,
it seems that there is a problem regarding the sensors of the phone,
especially the problem is extended to the flip cover , the screen should react according to the cover is put on it or not,
so please help me, because i couldn't use my phone while a phone call is in progress...
Thank You ..
same problem
nourworld said:
Dear support team,
i had a serious problem in my device galaxy mega 6.3 I9205
after i flashed the CM11 custom rom of android kit kat 4.4.2 on my device
i faced a serious problem, that the screen go black while a phone call is in progress,
and there is no way to light up the screen except after ending the call,
it seems that there is a problem regarding the sensors of the phone,
especially the problem is extended to the flip cover , the screen should react according to the cover is put on it or not,
so please help me, because i couldn't use my phone while a phone call is in progress...
Thank You ..
Click to expand...
Click to collapse
Hi....
I am also having the same problem....
bsvinod said:
Hi....
I am also having the same problem....
Click to expand...
Click to collapse
i'm the third no solution?
And the same problem with my Mega 6.3 after flashing CM11 4.4.2 rom by silesh.nair. Somebody knows what's wrong with our phones???
No one helps I've installed program that shows proximity sensor values and it's look like sensor in my mega doesn't works correctly. It's recognizing "near" all the time and don't response for any actions. Maybe sensor is broken. I've tried to change sensor values, but it doesn't help anyway. I have probably lost warranty after flashing CM11 and really don't know what to do now
Sorry for my poor english...
nourworld said:
Dear support team,
i had a serious problem in my device galaxy mega 6.3 I9205
after i flashed the CM11 custom rom of android kit kat 4.4.2 on my device
i faced a serious problem, that the screen go black while a phone call is in progress,
and there is no way to light up the screen except after ending the call,
it seems that there is a problem regarding the sensors of the phone,
especially the problem is extended to the flip cover , the screen should react according to the cover is put on it or not,
so please help me, because i couldn't use my phone while a phone call is in progress...
Thank You ..
Click to expand...
Click to collapse
FILIP S. said:
No one helps I've installed program that shows proximity sensor values and it's look like sensor in my mega doesn't works correctly. It's recognizing "near" all the time and don't response for any actions. Maybe sensor is broken. I've tried to change sensor values, but it doesn't help anyway. I have probably lost warranty after flashing CM11 and really don't know what to do now
Sorry for my poor english...
Click to expand...
Click to collapse
Flash a custom ROM/Kernel and see if the sensors are fixed. If they aren't then it might be a bug or hardware failure
N7105 rocking AOSB with AGNi kernel,
Sent from the "China who bans Google"
Click "Thanks" if I was of any help!
Ah hell I'm not the only one having this problem then. I thought I was crazy!
Bump
i9100 proximity sensor doesn't work
Hi to all!
I have the issue with proximity sensor and didn't manage to find a solution in other similar threads!
The matter is that it is always stay as Released.
In the same time in test screen (*#0*#) there are changing reading for PROXIMITY parameter from 2 up to 240 with no ADC parameter at all. Please look for screenshots. PROXIMITY parameter changes its value when I move my finger in front of the sensor, but as I can understand Android doesn't recognize it because of ADC absence.
Moreover I tried to change proximity sensor for working one (from another phone), but it shows the same as mine (with no ADC readings).
After all I think it is software problem, but I don't know how to solve it. I flashed different firmwares (now it is XWMSE NeatROM v.6.4), but nothing helped.
Please assist! Thanks!
Hello everybody,
I made this account specifically for this one problem, and i don't belive i've seen it before on this site. Alright, let me cut to the chase:I've had a Galaxy Trend plus for about a year and a half now (an oldie but a goodie) and i use it as my daily driver, mostly for emulators and WiFi. With one of those two knocked out, i'm desperate for help.
Okay, so all of a sudden it displays the no connection icon like a crossed circle thingy, and whenever i turn on WiFi, it won't detect it even 10 inches from the router. I've never had this error and i'm pretty concerned. My SIM card works on my friends phone, however. I've looked everything there is to look up, and i've done everything software-wise , which makes me think it's a hardware problem. If it is, is it under the warranty or not?If I can't make phone calls or browse the Interwebs, the phone is pretty much useless. If you guys have any suggestions or ideas, please help out an old Android fanboy
Sent from my HP Probook 6450b
Axel Gaming said:
Hello everybody,
I made this account specifically for this one problem, and i don't belive i've seen it before on this site. Alright, let me cut to the chase:I've had a Galaxy Trend plus for about a year and a half now (an oldie but a goodie) and i use it as my daily driver, mostly for emulators and WiFi. With one of those two knocked out, i'm desperate for help.
Okay, so all of a sudden it displays the no connection icon like a crossed circle thingy, and whenever i turn on WiFi, it won't detect it even 10 inches from the router. I've never had this error and i'm pretty concerned. My SIM card works on my friends phone, however. I've looked everything there is to look up, and i've done everything software-wise , which makes me think it's a hardware problem. If it is, is it under the warranty or not?If I can't make phone calls or browse the Interwebs, the phone is pretty much useless. If you guys have any suggestions or ideas, please help out an old Android fanboy
Sent from my HP Probook 6450b
Click to expand...
Click to collapse
Reflash your device. Its easy
look here for STOCK rom for your device.
http://www.sammobile.com/firmwares/
and here you are youtube GUIDE
https://youtu.be/diXLl8yxc0Y
good luck
Hvala
Paget96 said:
Reflash your device. Its easy
look here for STOCK rom for your device.
and here you are youtube GUIDE
good luck
Click to expand...
Click to collapse
hvala, videcu sta i kako i reci cu ti ako mi treba nesto
Hello everyone
I explain my problem.
I bought it a few Blacview Zeta, this phone encountered problems with the GPS and network reception problems.
I thought, "How bad idea" that I went searching on the internet an official rom to see if the problems could beings corrected.
I went to the official website of BlackView then I followed a link to download the rom.
While Roma are available on their official forum, so I download with confidence, I flash the phone, I restarts the phone and then surprise the display is illuminated but a black screen with vertical and horizontal lines.
The phone responds well to touch and hear different sound when you click on the screen. But we see nothing except the lines.
So I posted on the forum, but none of my posts do appear, I send messages directly to the contacts available on the official website no answers.
So I searched the internet for several days so I found other Roma.
I found three different rom a v0.5 and a v0.6 v0.7 but the problem remains the same at the screen.
I also saw the other person have the same problem as me, but she did not find one solution.
To me it seems that this is a graphic driver problem, a hardware modification to the model to be made that I own.
So I'm looking desperately this rom "S509_G3_Blackview_Zeta_V1.2_20160309" which is the one that corresponds to my phone.
I know my message is long, but I tried to explain to me the best.
Anyway thank you to everyone who can help me
sincerely Vincent
seven00766 said:
Hello everyone
I explain my problem.
I bought it a few Blacview Zeta, this phone encountered problems with the GPS and network reception problems.
I thought, "How bad idea" that I went searching on the internet an official rom to see if the problems could beings corrected.
I went to the official website of BlackView then I followed a link to download the rom.
While Roma are available on their official forum, so I download with confidence, I flash the phone, I restarts the phone and then surprise the display is illuminated but a black screen with vertical and horizontal lines.
The phone responds well to touch and hear different sound when you click on the screen. But we see nothing except the lines.
So I posted on the forum, but none of my posts do appear, I send messages directly to the contacts available on the official website no answers.
So I searched the internet for several days so I found other Roma.
I found three different rom a v0.5 and a v0.6 v0.7 but the problem remains the same at the screen.
I also saw the other person have the same problem as me, but she did not find one solution.
To me it seems that this is a graphic driver problem, a hardware modification to the model to be made that I own.
So I'm looking desperately this rom "S509_G3_Blackview_Zeta_V1.2_20160309" which is the one that corresponds to my phone.
I know my message is long, but I tried to explain to me the best.
Anyway thank you to everyone who can help me
sincerely Vincent
Click to expand...
Click to collapse
Hello
my position is still relevant, I am still waiting for a solution.
Thank you to all
seven00766 said:
Hello everyone
I explain my problem.
I bought it a few Blacview Zeta, this phone encountered problems with the GPS and network reception problems.
I thought, "How bad idea" that I went searching on the internet an official rom to see if the problems could beings corrected.
I went to the official website of BlackView then I followed a link to download the rom.
While Roma are available on their official forum, so I download with confidence, I flash the phone, I restarts the phone and then surprise the display is illuminated but a black screen with vertical and horizontal lines.
The phone responds well to touch and hear different sound when you click on the screen. But we see nothing except the lines.
So I posted on the forum, but none of my posts do appear, I send messages directly to the contacts available on the official website no answers.
So I searched the internet for several days so I found other Roma.
I found three different rom a v0.5 and a v0.6 v0.7 but the problem remains the same at the screen.
I also saw the other person have the same problem as me, but she did not find one solution.
To me it seems that this is a graphic driver problem, a hardware modification to the model to be made that I own.
So I'm looking desperately this rom "S509_G3_Blackview_Zeta_V1.2_20160309" which is the one that corresponds to my phone.
I know my message is long, but I tried to explain to me the best.
Anyway thank you to everyone who can help me
sincerely Vincent
Click to expand...
Click to collapse
Well coming back to you I found a ROM that matches my Zeta.
In made there are two versions of Zeta normal and V16, V16 I am..
Except that the rom that I found can be returned to the phone with "easy TRWP" I understand the procedure except that it must enable the USB debugging, but as I see absolutely nothing on the screen I can not activate it.
I know if a developer can do something with this rom so I can flash it with spflashtool?
I put a link is on my personal server that contains the rom.
I sincerely hope that someone finds a solution for me.
Because my skills are not sufficient to do something with this rom.
Thank you
Link :http://88.167.54.40:31796/share/M5neJI2eTFzDs7Yk/
seven00766 said:
Hello everyone
I explain my problem.
I bought it a few Blacview Zeta, this phone encountered problems with the GPS and network reception problems.
I thought, "How bad idea" that I went searching on the internet an official rom to see if the problems could beings corrected.
I went to the official website of BlackView then I followed a link to download the rom.
While Roma are available on their official forum, so I download with confidence, I flash the phone, I restarts the phone and then surprise the display is illuminated but a black screen with vertical and horizontal lines.
The phone responds well to touch and hear different sound when you click on the screen. But we see nothing except the lines.
So I posted on the forum, but none of my posts do appear, I send messages directly to the contacts available on the official website no answers.
So I searched the internet for several days so I found other Roma.
I found three different rom a v0.5 and a v0.6 v0.7 but the problem remains the same at the screen.
I also saw the other person have the same problem as me, but she did not find one solution.
To me it seems that this is a graphic driver problem, a hardware modification to the model to be made that I own.
So I'm looking desperately this rom "S509_G3_Blackview_Zeta_V1.2_20160309" which is the one that corresponds to my phone.
I know my message is long, but I tried to explain to me the best.
Anyway thank you to everyone who can help me
sincerely Vincent
Click to expand...
Click to collapse
well my problem is solved thanks to this forum http://www.htcmania.com/showthread.php?p=24006863#post24006863
thank you all anyway
I have this tablet from my Nephew to fix, he's just bought it and the firmware was freezing whenever anything ran on it. I Flashed it with a very similar FW, now there's no touchscreen, and although before everything made it freeze, the touchscreen was working. I've tried tens of firmwares, some work, some don't, but none of them fixes the touchscreen. If I use a mouse on it, everything works like a charm, and relatively fast too. I kinda gave up on finding a firmware because I've tried so many, I was wondering if there is a way I could install only the touchscreen drivers since everything else works in 3 of the firmwares I found.
Any help is appreciated, my nephew will be very grateful.
Brand: Larinos (never heard of before)
Model: Br2020
Allwinner A33
Board: tzx-733Q a1 (I've found many with the same code, except the "a1", but no luck with any of them
1gb Ram
16gb Rom
Touchscreen chip: cst21680 se - 003131907
wjuniorbr said:
I have this tablet from my Nephew to fix, he's just bought it and the firmware was freezing whenever anything ran on it. I Flashed it with a very similar FW, now there's no touchscreen, and although before everything made it freeze, the touchscreen was working. I've tried tens of firmwares, some work, some don't, but none of them fixes the touchscreen. If I use a mouse on it, everything works like a charm, and relatively fast too. I kinda gave up on finding a firmware because I've tried so many, I was wondering if there is a way I could install only the touchscreen drivers since everything else works in 3 of the firmwares I found.
Any help is appreciated, my nephew will be very grateful.
Brand: Larinos (never heard of before)
Model: Br2020
Allwinner A33
Board: tzx-733Q a1 (I've found many with the same code, except the "a1", but no luck with any of them
1gb Ram
16gb Rom
Touchscreen chip: cst21680 se - 003131907
Click to expand...
Click to collapse
A work around might be a otg cable and a USB keyboard\mouse @ least till you find what you need
TheMadScientist said:
A work around might be a otg cable and a USB keyboard\mouse @ least till you find what you need
Click to expand...
Click to collapse
That`s what I`m doing to test it, and it works, but this is for my 6yo nephew, I need the touchscreen for him.
wjuniorbr said:
That`s what I`m doing to test it, and it works, but this is for my 6yo nephew, I need the touchscreen for him.
Click to expand...
Click to collapse
On a lot of these no name or small name brands. It's nearly impossible to find em. I got a Nextbook and my firmware is all out of whack. The rotation is of 90 degrees. I ended up buying a second one to rip the firmware from and fix the first. Might be another option
TheMadScientist said:
On a lot of these no name or small name brands. It's nearly impossible to find em. I got a Nextbook and my firmware is all out of whack. The rotation is of 90 degrees. I ended up buying a second one to rip the firmware from and fix the first. Might be another option
Click to expand...
Click to collapse
In this case I don't think I will buy another one just to fix it, and I surely won't know anyone who has one of the same brand, but even if I did, I might not work, because although in the original firmware everything (including the touchscreen) was working, it kept freezing whenever I opened anything, the same might happen again