Hey guys, I have a problem. I probably soft-bricked my phone. I wanted to flash rom from needrom, but after the green circle showed up, my phone won't boot, not even into recovery or factory mode. I wanted to try other Roms to unbrick it, but there is this ENABLE DRAM FAILED problem...
Windows recognizes that phone is connected, but error from the picture shows up everytime. I tried two cables, usb drivers from many sources, two notebooks, but nothing helped. I am sure that i tried ONLY rom for my phone, nothing other. I tried too a special video tutorial on youtube for Star S5, which could prevent the error if i put battery in phone after I connect it. Diddn't work either.
I red somewhere on the xda that if mobile can be connected and is recognized by computer, there is still a chance, but I am quite hopeless right now.. Please help if you know how to, or ask anything that should help you to recognize the problem, I'll answer imidiately.
THANKS FOR ANY HELP!
Yes, unfortunatelly same problem by flashing bad rom from needrom, which is still posted on their websites, so be careful!!
If anyone could help with this error it would be great.
thanks a lot :good:
Thanks a lot! Please, anybody knows how to solve this problem?
..anybody?
Related
I know, I know: First use the board-search and google...
I did that and I couldn't find anything useful for my issue.
I'm trying to update my HTC Prophet G4 to WM6.1...
I wanted to use SoftSPL and after executing the SPL.lnk the screen turns white as it should, but after that Windows XP doesn't recognize my phone anymore as connected.
I tried different USB-Ports, but the "ROMUpdateUtility_NV_G4.exe" keeps telling me "Error 260" which means it couldn't connect to my phone.
I'm really desperate cause I've already tried to upgrade for some days...
So if anyone knows how to fix that plz write =D English and German are okay with me
mickgrand said:
I know, I know: First use the board-search and google...
I did that and I couldn't find anything useful for my issue.
I'm trying to update my HTC Prophet G4 to WM6.1...
I wanted to use SoftSPL and after executing the SPL.lnk the screen turns white as it should, but after that Windows XP doesn't recognize my phone anymore as connected.
I tried different USB-Ports, but the "ROMUpdateUtility_NV_G4.exe" keeps telling me "Error 260" which means it couldn't connect to my phone.
I'm really desperate cause I've already tried to upgrade for some days...
So if anyone knows how to fix that plz write =D English and German are okay with me
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=353547
Thanks for posting, but as I already told you: I did my research...
So I already tried different FlashingTools, like ProphetTools etc.
When I SoftSPL, I get to the whitescreen but i cannot make my pc recognize the phone at my usb-port.
When I enter the 3-Colored-Screen manually it shows the usb-connectivity, but I cannot update the ROM...
There was a way (I cannot remember anymore which way I did it, cause I really tried very often) I entered the 3-Colored-Screen and there was "RUU" written in the right upper corner of the screen. But then again the connectivity doesn't work...
Also tried different usb-ports and cables...
I could say that I'm feeling like a weirdo, cause upgrading a rom seems easy and still makes my day miserable xD
//EDIT:
Didn't see the "Lazy_Tool" at the first glance, but now after trying I still get the same error...
//EDIT2:
Realized that the error-code could be useful^^ --> "Error[260]: Update Error" (Sth like that^^)
I had a similar issue. When your PC reports it cannot connect to the phone - does the phone restarts?
mickgrand said:
Thanks for posting, but as I already told you: I did my research...
So I already tried different FlashingTools, like ProphetTools etc.
When I SoftSPL, I get to the whitescreen but i cannot make my pc recognize the phone at my usb-port.
When I enter the 3-Colored-Screen manually it shows the usb-connectivity, but I cannot update the ROM...
There was a way (I cannot remember anymore which way I did it, cause I really tried very often) I entered the 3-Colored-Screen and there was "RUU" written in the right upper corner of the screen. But then again the connectivity doesn't work...
Also tried different usb-ports and cables...
I could say that I'm feeling like a weirdo, cause upgrading a rom seems easy and still makes my day miserable xD
//EDIT:
Didn't see the "Lazy_Tool" at the first glance, but now after trying I still get the same error...
//EDIT2:
Realized that the error-code could be useful^^ --> "Error[260]: Update Error" (Sth like that^^)
Click to expand...
Click to collapse
260 IS A KIND OF CONNECTION ERROR,
PLEASE SOFTRESET AND TRY AGAIN!!!
1. FLASH NVID FIRST,
2. LAZY TOOL TO HAVE THE JOB DONE.
dwizard said:
I had a similar issue. When your PC reports it cannot connect to the phone - does the phone restarts?
Click to expand...
Click to collapse
If u want to know if I bricked the phone then no =) I can restart it and everythings fine^^
If u meant sth else plz specify your question a bit
@ dioxda2:
Ok I'll experiment a bit^^ I'll get my new hardware soon, so maybe the error won't be a problem^^ We'll see =)
mickgrand said:
If u want to know if I bricked the phone then no =) I can restart it and everythings fine^^
If u meant sth else plz specify your question a bit
Click to expand...
Click to collapse
OK, rephrasing: the problem I had with my phone was that while a ROM update was running the phone would restart and I got the same error you did.
It turned out the battery was at fault, after replacing it with a new one - it works great.
If u do as dioxda2 says all should be fine. He is right in saying 260 is a connection error. That means unplugging all usb devices out of ur machine. It also means disabling all other connection software, like my raspberry program that display device screen when active sync'd. I always disable my anti virus and firewall (make sure ur not connected to internet at time).
i always ensure that the flashing tool is on the root drive, not in many folders (so place flash tool direct on ur main hard drive in its folder as uve unzipped) this itself can cuase connection errors. Ensure battery is 50% min too.
Good luck
Ok, so like I was flashing my phone to Cyanogen mod 9 (using CWM port 0.6) and it went wrong. My phone is now bricked. When I try to boot it up now I get the phone to computer warning thingy message
I can get it into download mode and emergency download mode, but Odin either comes up with "FAIL."
I have tried every single thing on the web, NOTHING works (One click unbrick etc, etc, etc). Please help!
One thing that might help is One Click Unbrick, even after i've installed all of the software, reinstalled the drivers, won't recognise my phone!
Is there anything left that I could try???
P.S. On all the other similar threads, the things they suggest don't work
Mad_Guy said:
Ok, so like I was flashing my phone to Cyanogen mod 9 (using CWM port 0.6) and it went wrong. My phone is now bricked. When I try to boot it up now I get the phone to computer warning thingy message
I can get it into download mode and emergency download mode, but Odin either comes up with "FAIL."
I have tried every single thing on the web, NOTHING works (One click unbrick etc, etc, etc). Please help!
One thing that might help is One Click Unbrick, even after i've installed all of the software, reinstalled the drivers, won't recognise my phone!
Is there anything left that I could try???
P.S. On all the other similar threads, the things they suggest don't work
Click to expand...
Click to collapse
One click unbrick wont work on the galaxy 5 (i think ) and the best way to unbrick your phone is to use a JTAG or simply give it to samsung for repairs... Trying something which is not supported may worsen the situation ..
The phone notified me there is a system update so I went ahead. Unfortunately, towards the end, it gave me an error message. I remember seeing the big Android robot lying flat on its back.
Now, the phone is completely dead. When I connect it to my computer I can hear the "new hardware connected" sound then immediately the disconnecting sound. This goes on and on for ever.
I tried using the tools provided on Leagoo's site, but they're useless as the computer is not able to recognize the phone.
Is there a hard reset key combination?
Thanks.
Eddie
silentmonolith said:
The phone notified me there is a system update so I went ahead. Unfortunately, towards the end, it gave me an error message. I remember seeing the big Android robot lying flat on its back.
Now, the phone is completely dead. When I connect it to my computer I can hear the "new hardware connected" sound then immediately the disconnecting sound. This goes on and on for ever.
I tried using the tools provided on Leagoo's site, but they're useless as the computer is not able to recognize the phone.
Is there a hard reset key combination?
Thanks.
Eddie
Click to expand...
Click to collapse
I've here 4 brick-phone (friends have updated with the same result!).
leagoo support didn't answer to my polite email of support.
Anyone can give us a sugestion to recover it!?
j045 said:
I've here 4 brick-phone (friends have updated with the same result!).
leagoo support didn't answer to my polite email of support.
Anyone can give us a sugestion to recover it!?
Click to expand...
Click to collapse
In the end, I was able to finally recover it. I just kept trying and trying: while the phone was connected to the computer, I removed the battery, then I put it back in; as well I was disconnecting it from the computer, then plug it back - I did this several times until the software on the computer was able to recognize it.
Even so, when I managed to reflash it, around 60%-70%, I got a message that it failed; so I tried again - it failed around 80% then I tried one more time and it was successful. Now the phone is working fine.
So my advice to you is to keep trying - leave the software on and click on the "download firmware" or whatever it was called, meanwhile keep unplugging the phone (and play with the battery as well).
Good luck! (you will need it)
Same problem, but leagoo responded with driver, firmware, flash tool, instructions and a video.
But nothing changed, so i have to retry.
Thanks for your post.
Edit:
I was thinking that was a hardware problem with micro usb connector!
ItalianWolf said:
Same problem, but leagoo responded with driver, firmware, flash tool, instructions and a video.
But nothing changed, so i have to retry.
Thanks for your post.
Edit:
I was thinking that was a hardware problem with micro usb connector!
Click to expand...
Click to collapse
i did it! just tried a lot of times, but firmware from leagoo doesn't work, display shows only "stipes".
I found another firmware (don't remember where) and then all things went good.
Now the phone notified me there is a system update, i have to do it?
Hi community,
I really thought it is not this hard to flash a phone, but I got into for me unsolvable problems. I tried to flash my phone and I used a step by step tutorial how do to this. With the flash tool, also the green circle appeared at the end, but since then I cannot use my phone.
Afterwards I really tried every driver, every ROM and different flash tools I could find to reflash my phone again, but without success.
Image: http ://fs1.directupload.net /images/150611/lt6jbqqh.png
I get the 4032 error message, and it means that I am using the wrong driver. But I installed different drivers so many times, and its still without sucess. What can I do?
Please help! I would really appreciate it.
Noeeel said:
Hi community,
I really thought it is not this hard to flash a phone, but I got into for me unsolvable problems. I tried to flash my phone and I used a step by step tutorial how do to this. With the flash tool, also the green circle appeared at the end, but since then I cannot use my phone.
Afterwards I really tried every driver, every ROM and different flash tools I could find to reflash my phone again, but without success.
Image: http ://fs1.directupload.net /images/150611/lt6jbqqh.png
I get the 4032 error message, and it means that I am using the wrong driver. But I installed different drivers so many times, and its still without sucess. What can I do?
Please help! I would really appreciate it.
Click to expand...
Click to collapse
Maybe you flashed the wrong preloader!
What is written on your phone box!
Your phone is made after 03.2014 ?
stympy said:
Maybe you flashed the wrong preloader!
What is written on your phone box!
Your phone is made after 03.2014 ?
Click to expand...
Click to collapse
On my phone box it the date 25.09.2014 (on a sticker with a bar code).
Where do I get the right preloader? I tried everything I found, so I am not sure, but lets give it a try! Thank you for your help.
Noeeel said:
On my phone box it the date 25.09.2014 (on a sticker with a bar code).
Where do I get the right preloader? I tried everything I found, so I am not sure, but lets give it a try! Thank you for your help.
Click to expand...
Click to collapse
Hi. Just replace the preloader in your firmware folder , prepare to flash like the last time, open flash tool, load scattre file, delete checksum.imi if exist.... bla bla bla.
Flash with this preloader and tell me if it works !
Good Luck.
Please any one help me.
I installed a custom rom in my A311 and it is in boot loop now. I tried to flash the stock rom using YGDP tool but it stuck in entering download mode. The phone is not detecting in computer. Then i tried to flash the files through SP flash tool v5.1424.00. It detects the phone and started flashing but after some time it shows an error and stoped. Please give me a solution to flash the stock rom. I can not enter in to recovery mode also. The phone is in boot loop now. Please help me.
shaijuvjohn said:
Please any one help me.
I installed a custom rom in my A311 and it is in boot loop now. I tried to flash the stock rom using YGDP tool but it stuck in entering download mode. The phone is not detecting in computer. Then i tried to flash the files through SP flash tool v5.1424.00. It detects the phone and started flashing but after some time it shows an error and stoped. Please give me a solution to flash the stock rom. I can not enter in to recovery mode also. The phone is in boot loop now. Please help me.
Click to expand...
Click to collapse
Install VCOM drivers , google usb drivers & mt65xx preloader drivers on your pc and then flash it using YDGP tools
Dude I've tried SP flash tools hundred times, but it does not work.
So follow my steps.
Install YGDP tools.
Click config and click "select CPB file"
Then select the firmware file which will be in .CPB format.
Wait for 5 mins because the software will verify the cpb file.
Now turn off your phone and REMOVE THE BATTERY.
Click "Start" button in YGDP tools
Then connect the phone to the computer. (Do not insert the battery !!!!!!)
You will see that the flashing will start. DO NOT DO ANYTHING till it finishes.
When it shows Done, remove the phone, insert the battery and turn on the phone. Easy..
And press thanks...
If still any prob, post reply..:good::good:
Thank you for the reply. I tried the same but in ygdp it shows the message 'Entering download mode' and nothing happens then. It waits for long time to connect the phone. It does not detect the connected phone. I have all the drivers installed in my computer. I have already done installing the stock rom before when i have boot loops. But now, when i connect the phone without battery it do not detect it. In device manager it shows 'PreLoader USB VCOM (Android)' in ports for about 5 seconds and it disappears. When i connect the phone with battery it directly goes to charging mode and shows battery charging image. I dont know what is happening, please help me, if any other solution?
Anyone please any other solution. If it work anymore?? Please help me.
shaijuvjohn said:
Anyone please any other solution. If it work anymore?? Please help me.
Click to expand...
Click to collapse
Man... I dont know what is the prob. I have recently tried this on a new computer and its working perfectly.
I think i will make a video and upload it..
yea, i too dont know, i have done flashing the stock rom using the ygdp tool several times before.. may be something went wrong in the phone..
It worked perfectly from my laptop
shreyash.kanaujia said:
Man... I dont know what is the prob. I have recently tried this on a new computer and its working perfectly.
I think i will make a video and upload it..
Click to expand...
Click to collapse
Thanks friend shreyash.kanaujia.. It worked.. I tried it from my lap top :good:. It was a clue that you told me that you tried it from a new computer. I installed all in my desk top pc and was working on that one before. Just now i installed all drivers and everything in my lap and it worked. Thank you so much for that clue... Otherwise my phone will be a paper weight.. Thank you. And one more time, thanks for all others replied on this thread.
There is one more thing shreyash.kanaujia, if you are making a video, please include a word for this situation also. If the phone is not detecting in a computer any more, those ones have to try it from a new computer.
shaijuvjohn said:
Anyone please any other solution. If it work anymore?? Please help me.
Click to expand...
Click to collapse
Ok. Now do one thing.
Uninstall all drivers from your pc. Everything.
Then follow THIS VIDEO !!
https://www.youtube.com/watch?v=tJoJO4NJRDI
then thank me.:good::good:
And by the way, the video was not made by me...
yes already done everything..
VCOM Drivers
Does anyone have the VCOM Drivers for MT6592 / MIcromax Nitro A311? please share the link. thanks!
Ali_089 said:
Does anyone have the VCOM Drivers for MT6592 / MIcromax Nitro A311? please share the link. thanks!
Click to expand...
Click to collapse
https://drive.google.com/file/d/0BwI-z-jARlQZVjlMQTAwX1JFNG8/edit?pli=1
Download and check whether this one works.
@shaijuvjohn check this thread for twrp flashable stock rom for a311
http://forum.xda-developers.com/a310/orig-development/rom-twrp-flashable-micromax-canvas-t3287008
same problem but no solution
shaijuvjohn said:
Thanks friend shreyash.kanaujia.. It worked.. I tried it from my lap top :good:. It was a clue that you told me that you tried it from a new computer. I installed all in my desk top pc and was working on that one before. Just now i installed all drivers and everything in my lap and it worked. Thank you so much for that clue... Otherwise my phone will be a paper weight.. Thank you. And one more time, thanks for all others replied on this thread.
There is one more thing shreyash.kanaujia, if you are making a video, please include a word for this situation also. If the phone is not detecting in a computer any more, those ones have to try it from a new computer.
Click to expand...
Click to collapse
i have tried 4 different computer but same problem is not solved pls help