Briked Micromax A311 - Boot loop - Micromax Canvas Nitro A310/A311

Please any one help me.
I installed a custom rom in my A311 and it is in boot loop now. I tried to flash the stock rom using YGDP tool but it stuck in entering download mode. The phone is not detecting in computer. Then i tried to flash the files through SP flash tool v5.1424.00. It detects the phone and started flashing but after some time it shows an error and stoped. Please give me a solution to flash the stock rom. I can not enter in to recovery mode also. The phone is in boot loop now. Please help me.

shaijuvjohn said:
Please any one help me.
I installed a custom rom in my A311 and it is in boot loop now. I tried to flash the stock rom using YGDP tool but it stuck in entering download mode. The phone is not detecting in computer. Then i tried to flash the files through SP flash tool v5.1424.00. It detects the phone and started flashing but after some time it shows an error and stoped. Please give me a solution to flash the stock rom. I can not enter in to recovery mode also. The phone is in boot loop now. Please help me.
Click to expand...
Click to collapse
Install VCOM drivers , google usb drivers & mt65xx preloader drivers on your pc and then flash it using YDGP tools

Dude I've tried SP flash tools hundred times, but it does not work.
So follow my steps.
Install YGDP tools.
Click config and click "select CPB file"
Then select the firmware file which will be in .CPB format.
Wait for 5 mins because the software will verify the cpb file.
Now turn off your phone and REMOVE THE BATTERY.
Click "Start" button in YGDP tools
Then connect the phone to the computer. (Do not insert the battery !!!!!!)
You will see that the flashing will start. DO NOT DO ANYTHING till it finishes.
When it shows Done, remove the phone, insert the battery and turn on the phone. Easy..
And press thanks...
If still any prob, post reply..:good::good:

Thank you for the reply. I tried the same but in ygdp it shows the message 'Entering download mode' and nothing happens then. It waits for long time to connect the phone. It does not detect the connected phone. I have all the drivers installed in my computer. I have already done installing the stock rom before when i have boot loops. But now, when i connect the phone without battery it do not detect it. In device manager it shows 'PreLoader USB VCOM (Android)' in ports for about 5 seconds and it disappears. When i connect the phone with battery it directly goes to charging mode and shows battery charging image. I dont know what is happening, please help me, if any other solution?

Anyone please any other solution. If it work anymore?? Please help me.

shaijuvjohn said:
Anyone please any other solution. If it work anymore?? Please help me.
Click to expand...
Click to collapse
Man... I dont know what is the prob. I have recently tried this on a new computer and its working perfectly.
I think i will make a video and upload it..

yea, i too dont know, i have done flashing the stock rom using the ygdp tool several times before.. may be something went wrong in the phone..

It worked perfectly from my laptop
shreyash.kanaujia said:
Man... I dont know what is the prob. I have recently tried this on a new computer and its working perfectly.
I think i will make a video and upload it..
Click to expand...
Click to collapse
Thanks friend shreyash.kanaujia.. It worked.. I tried it from my lap top :good:. It was a clue that you told me that you tried it from a new computer. I installed all in my desk top pc and was working on that one before. Just now i installed all drivers and everything in my lap and it worked. Thank you so much for that clue... Otherwise my phone will be a paper weight.. Thank you. And one more time, thanks for all others replied on this thread.
There is one more thing shreyash.kanaujia, if you are making a video, please include a word for this situation also. If the phone is not detecting in a computer any more, those ones have to try it from a new computer.

shaijuvjohn said:
Anyone please any other solution. If it work anymore?? Please help me.
Click to expand...
Click to collapse
Ok. Now do one thing.
Uninstall all drivers from your pc. Everything.
Then follow THIS VIDEO !!
https://www.youtube.com/watch?v=tJoJO4NJRDI
then thank me.:good::good:
And by the way, the video was not made by me...

yes already done everything..

VCOM Drivers
Does anyone have the VCOM Drivers for MT6592 / MIcromax Nitro A311? please share the link. thanks!

Ali_089 said:
Does anyone have the VCOM Drivers for MT6592 / MIcromax Nitro A311? please share the link. thanks!
Click to expand...
Click to collapse
https://drive.google.com/file/d/0BwI-z-jARlQZVjlMQTAwX1JFNG8/edit?pli=1
Download and check whether this one works.

@shaijuvjohn check this thread for twrp flashable stock rom for a311
http://forum.xda-developers.com/a310/orig-development/rom-twrp-flashable-micromax-canvas-t3287008

same problem but no solution
shaijuvjohn said:
Thanks friend shreyash.kanaujia.. It worked.. I tried it from my lap top :good:. It was a clue that you told me that you tried it from a new computer. I installed all in my desk top pc and was working on that one before. Just now i installed all drivers and everything in my lap and it worked. Thank you so much for that clue... Otherwise my phone will be a paper weight.. Thank you. And one more time, thanks for all others replied on this thread.
There is one more thing shreyash.kanaujia, if you are making a video, please include a word for this situation also. If the phone is not detecting in a computer any more, those ones have to try it from a new computer.
Click to expand...
Click to collapse
i have tried 4 different computer but same problem is not solved pls help

Related

Lenovo P780 -MT6589 device hard bricked - Need help

Hi, I think I am in deep trouble now. My p780 8gb is completely dead after trying to flash a TWRP recovery in to it using a flash tool. Not sure what went wrong I fiddled with some settings in flash tool like 'firmware upgrade' and 'download' and at last saw a Dram failed message. I was using the latest s226 Kitkat ROW. Now all I can see is a red led charging light glowing while connecting it to a computer. The device is not getting recognized by VCOM drivers so no use with flash tool any more. Tried to reboot in to recovery and meta mode but the phone simply does not turn on. Anyone knows how to unbrick this, kindly help.
xperimen said:
Hi, I think I am in deep trouble now. My p780 8gb is completely dead after trying to flash a TWRP recovery in to it using a flash tool. Not sure what went wrong I fiddled with some settings in flash tool like 'firmware upgrade' and 'download' and at last saw a Dram failed message. I was using the latest s226 Kitkat ROW. Now all I can see is a red led charging light glowing while connecting it to a computer. The device is not getting recognized by VCOM drivers so no use with flash tool any more. Tried to reboot in to recovery and meta mode but the phone simply does not turn on. Anyone knows how to unbrick this, kindly help.
Click to expand...
Click to collapse
Hi. Please tell me if your phone is made in 2014. From what i see all phones made in 2014 must be flashed with another preloader. The simptoms you are described here seems that way. Waiting fro reply...
2014 vesrsion
stympy said:
Hi. Please tell me if your phone is made in 2014. From what i see all phones made in 2014 must be flashed with another preloader. The simptoms you are described here seems that way. Waiting fro reply...
Click to expand...
Click to collapse
Hi stympy,
Yes it is a 2014 January version. But to be honest I was using a ROM with 2013 version preloader but never faced any problem, Today purposefully changed it to the new 121kb 2014 preloader and everything was fine till I used the v5 flashtool to flash the twrp and I think I selected the upgrade option in it and flashed the twrp> found the ROM and preloaders from needrom.com from the uploader xxxsadistxxx .It worked flawlessly and then after first booting I configured the wi-fi settings again turned it off and tried to install the custom recovery. Now completely helpless because the phone is not getting detected by VCOM drivers.
xperimen said:
Hi stympy,
Yes it is a 2014 January version. But to be honest I was using a ROM with 2013 version preloader but never faced any problem, Today purposefully changed it to the new 121kb 2014 preloader and everything was fine till I used the v5 flashtool to flash the twrp and I think I selected the upgrade option in it and flashed the twrp> found the ROM and preloaders from needrom.com from the uploader xxxsadistxxx .It worked flawlessly and then after first booting I configured the wi-fi settings again turned it off and tried to install the custom recovery. Now completely helpless because the phone is not getting detected by VCOM drivers.
Click to expand...
Click to collapse
Look what you have to do!
Hi. The think was someting like this:
0. Unzip/Unrar those 2 archives.
1. First i install the .exe file from archive LenovoUsbDriver_autorun_1.0.10.zip. Reboot PC.
2. Plug the phone to your PC and new hardware wizard has appeared. Install the drivers by pressing automaticaly search the drivers.
3. Now power off the phone, and open the Device Manager, in Ports section.
4. With the Device Manager open, plug the phone this time powered off.
5. At this time in Device Manager/ Ports section, appeared for a second or two not in USB area something with.. MTK65...
6. Double Click fast on it because that will desapear very fast . If you missed the click for the first time unplug and replug the phone after about 5 seconds.
7. After you clicked on it all you have to do is update driver from MTK_USB__Driver_GOOOOODDD.rar archive, and voila you have drivers installed and now all you have to do is to flash you ROM.
Hope this will help you.
Tell me iff something goes wrong.
Good luck.
help
stympy said:
Look what you have to do!
Hi. The think was someting like this:
1. First i install the .exe file from archive LenovoUsbDriver_autorun_1.0.10.zip. Reboot PC.
2. Plug the phone to your PC and new hardware wizard has appeared. Install the drivers by pressing automaticaly search the drivers.
3. Now power off the phone.
4. Again plug the phone this time powered off.
5. At this time in Device Manager appeared for a second or two not in USB area something with.. MTK65...
6. Click very fast on it because that will desapear fast.
7. After you clicked on it all you have to do is update driver from MTK_USB__Driver_GOOOOODDD.rar archive, and voila you have drivers installed and now all you have to do is to flash you ROM.
Hope this will help you.
Tell me iff something goes wrong.
Good luck.
Click to expand...
Click to collapse
1) Hi, thanks for the troubleshooting steps but for the 3rd and 4th step, the phone is always in a switched off mode only. It simply doesn't get turn on in any mode.
2) I am using Windows 8.1 OS and Lenovo Usb Driver1.0.10 and VCOM drivers are already installed in it after turning off the digital signature check in win 8x OS and now nothing is happening after clicking on install option of LenovoUsbDriver_autorun_1.0.10.exe Is it a problem or in other OS also it wont prompt to click next or something like in a regular driver installation.
3) Phone is not getting detected in device manager after connecting it, so cant update drivers
Please suggest me what to do next.
xperimen said:
1) Hi, thanks for the troubleshooting steps but for the 3rd and 4th step, the phone is always in a switched off mode only. It simply doesn't get turn on in any mode.
2) I am using Windows 8.1 OS and Lenovo Usb Driver1.0.10 and VCOM drivers are already installed in it after turning off the digital signature check in win 8x OS and now nothing is happening after clicking on install option of LenovoUsbDriver_autorun_1.0.10.exe Is it a problem or in other OS also it wont prompt to click next or something like in a regular driver installation.
3) Phone is not getting detected in device manager after connecting it, so cant update drivers
Please suggest me what to do next.
Click to expand...
Click to collapse
Ok. Try this:
1. Open the back case of your phone.
1.1 Open the device manager on your PC.
2. You will find there an small red button.
3. Now plug your phone to your PC.
4. After you plugged the phone press the red button for 20 secconds.not optional
5. Release the button and see what is going on in your device manager.
6. Iff your preloader is messed up something should going on.
7. Should appear something like new hardware detected, that is the point when you update the drivers, and your phone will be detected by your PC
8. Try this and tell me if something goes wrong.
Good luck.
Sent from my Lenovo P780
TWRP magic
stympy said:
Ok. Try this:
1. Open the back case of your phone.
1.1 Open the device manager on your PC.
2. You will find there an small red button.
3. Now plug your phone to your PC.
4. After you plugged the phone press the red button for 20 secconds.not optional
5. Release the button and see what is going on in your device manager.
6. Iff your preloader is messed up something should going on.
7. Should appear something like new hardware detected, that is the point when you update the drivers, and your phone will be detected by your PC
8. Try this and tell me if something goes wrong.
Good luck.
Sent from my Lenovo P780
Click to expand...
Click to collapse
Hi thanks a lot stympy. I am glad that you were spending the time and effort to help me. I saw that red button trouble shooting post in your TWRP thread and luckily for me after clicking on different options in device manager while setting a complete format in sp flashtool the device suddenly got detected and format was done. After the format the device has lost its imei number, BT code and Wlan codes. That was going to be a hectic job to reinstall imei with imei repairing tools and usage of Hexa editor for BT and wi-fi codes just because some drivers were not getting installed properly.. But to my sheer luck I had a "Data' back up in TWRP with my previous version prerooted rom . I was not that confident to get a restore of imei , BT and wlan codes because it is just a 'data' back up not full ROM. I ticked the md5 checksum and voila after installing the back up 'Data' everything , absolutely every single code in my p780 got reinstalled automatically .LONG LIVE TWRP DEVELOPERS......... May be even after formatting the complete flash drive of the phone it still keeps the imei and other codes in factory mode. I am not sure. Now phone is in perfect condition and I am ready for another go. Stympy please create a 2.7.1 twrp for 2014 preloader p780 8gb. thanks again for all your help
xperimen said:
Hi thanks a lot stympy. I am glad that you were spending the time and effort to help me. I saw that red button trouble shooting post in your TWRP thread and luckily for me after clicking on different options in device manager while setting a complete format in sp flashtool the device suddenly got detected and format was done. After the format the device has lost its imei number, BT code and Wlan codes. That was going to be a hectic job to reinstall imei with imei repairing tools and usage of Hexa editor for BT and wi-fi codes just because some drivers were not getting installed properly.. But to my sheer luck I had a "Data' back up in TWRP with my previous version prerooted rom . I was not that confident to get a restore of imei , BT and wlan codes because it is just a 'data' back up not full ROM. I ticked the md5 checksum and voila after installing the back up 'Data' everything , absolutely every single code in my p780 got reinstalled automatically .LONG LIVE TWRP DEVELOPERS......... May be even after formatting the complete flash drive of the phone it still keeps the imei and other codes in factory mode. I am not sure. Now phone is in perfect condition and I am ready for another go. Stympy please create a 2.7.1 twrp for 2014 preloader p780 8gb. thanks again for all your help
Click to expand...
Click to collapse
WARRNING This are only for 8GB PHONES.
Here you are.
Try to flash with scatter files one by one till works.
Use only SP Flash Tool 5.
After flashing TWRP do not reboot the phone, start the phone with Power button Vol + and Vol - pressed. NOT OPTIONAL
Be carrefoul to select Download not Firmware Upgrade.
Good Luck.
Thank you stympy master
stympy said:
WARRNING This are only for 8GB PHONES.
Here you are.
Try to flash with scatter files one by one till works.
Use only SP Flash Tool 5.
After flashing TWRP do not reboot the phone, start the phone with Power button Vol + and Vol - pressed. NOT OPTIONAL
Be carrefoul to select Download not Firmware Upgrade.
Good Luck.
Click to expand...
Click to collapse
whoaa...that worked.. the 1st scatter file just worked..thanks a lot Sir stympy. Thank you very much
xperimen said:
whoaa...that worked.. the 1st scatter file just worked..thanks a lot Sir stympy. Thank you very much
Click to expand...
Click to collapse
You are wellcome. Glad to help
stympy said:
You are wellcome. Glad to help
Click to expand...
Click to collapse
Hey Stympy, you seem to know quite a lot about this! I have the same problem with my p780 4GB. After flashing everything seemed ok, as I got a green circle in SPFlash tools. However now I am not able to boot anymore. When connecting my phone to my computer the red light goes on and Device Manager shows a new MTK USB Port. When pushing the red button it immediately disappears. Does not matter if I push it for 20 seconds, as soon as I let go its bak in device manager.
When trying to reflash using SPFlash, it seems to recognize my phone, but when trying to format or Upgrade or Download, the red bar only loads up to 141776 Bytes and stops. Sometimes I have to push the red button for the phone to get recognized.
Any help would be greatly appreciated!
ps: CMIIT ID on the battery says 2013xxxxxxx so I guess its a 2013 model?
jeerome88 said:
Hey Stympy, you seem to know quite a lot about this! I have the same problem with my p780 4GB. After flashing everything seemed ok, as I got a green circle in SPFlash tools. However now I am not able to boot anymore. When connecting my phone to my computer the red light goes on and Device Manager shows a new MTK USB Port. When pushing the red button it immediately disappears. Does not matter if I push it for 20 seconds, as soon as I let go its bak in device manager.
When trying to reflash using SPFlash, it seems to recognize my phone, but when trying to format or Upgrade or Download, the red bar only loads up to 141776 Bytes and stops. Sometimes I have to push the red button for the phone to get recognized.
Any help would be greatly appreciated!
ps: CMIIT ID on the battery says 2013xxxxxxx so I guess its a 2013 model?
Click to expand...
Click to collapse
Hi. Can you tell me what firmware did you have ?
From what you described your phone seems to be from 2014. This are the simptoms when the preloader is messed up.
Look what you should try:
Download from here the preloader: http://forum.xda-developers.com/lenovo-p780/help/lenovo-p780-chineese-speed-version-t2874161
Replace your Curent ROM preloader with the one you downloaded.
Drivers from here: http://forum.xda-developers.com/len...ial-kitkat-t2835605/post55587780#post55587780
Try this one and tell me if somethin goes wrong.
Waiting for Reply.
stympy said:
Hi. Can you tell me what firmware did you have ?
From what you described your phone seems to be from 2014. This are the simptoms when the preloader is messed up.
Look what you should try:
Download from here the preloader: http://forum.xda-developers.com/lenovo-p780/help/lenovo-p780-chineese-speed-version-t2874161
Replace your Curent ROM preloader with the one you downloaded.
Drivers from here: http://forum.xda-developers.com/len...ial-kitkat-t2835605/post55587780#post55587780
Try this one and tell me if somethin goes wrong.
Waiting for Reply.
Click to expand...
Click to collapse
Excellent! Did exactly what you said, works like a charm. You made my day Sir! Thank you very much!
jeerome88 said:
Excellent! Did exactly what you said, works like a charm. You made my day Sir! Thank you very much!
Click to expand...
Click to collapse
You are wellcome!
Friend HELP me also
xperimen said:
Hi, I think I am in deep trouble now. My p780 8gb is completely dead after trying to flash a TWRP recovery in to it using a flash tool. Not sure what went wrong I fiddled with some settings in flash tool like 'firmware upgrade' and 'download' and at last saw a Dram failed message. I was using the latest s226 Kitkat ROW. Now all I can see is a red led charging light glowing while connecting it to a computer. The device is not getting recognized by VCOM drivers so no use with flash tool any more. Tried to reboot in to recovery and meta mode but the phone simply does not turn on. Anyone knows how to unbrick this, kindly help.
Click to expand...
Click to collapse
I also want get rid of this bricked p780 8gb updated to kitkat 4.2.2 . Kindly, help me also with step by step procedure I'm totally new to this world. My phone is stuck at Lenovo logo... that it.... Please help me... ;(
apsaujla08 said:
I also want get rid of this bricked p780 8gb updated to kitkat 4.2.2 . Kindly, help me also with step by step procedure I'm totally new to this world. My phone is stuck at Lenovo logo... that it.... Please help me... ;(
Click to expand...
Click to collapse
Hi. Download the rom you need for your phone from here !
Download SP Flash Tool 5 from here!
Download drivers from here and here !
BE CAREFUL USE ONLY WINDOWS 7 ! THIS IS NOT OPTIONAL! IF YOU DONT HAVE WINDOWS 7 LOOK FOR VMWARE AND INSTAL THERE A VIRTUAL MACHINE !
Install first the drivers!
Open SP Flash Tool with admin rights!
Use this tutorial! If you dont manage PM me !
Good Luck!
help me too
jeerome88 said:
Excellent! Did exactly what you said, works like a charm. You made my day Sir! Thank you very much!
Click to expand...
Click to collapse
@stympy your statistics are impressive 1 greeting / 2 posts.
I've hope that I'll be more than just grateful. I've problem with modem in P780 "SIM ME locked, do you want to unlock" after unbricking.
It ask me about SIM pin and after no signal.
Regards
ungbar said:
@stympy your statistics are impressive 1 greeting / 2 posts.
I've hope that I'll be more than just grateful. I've problem with modem in P780 "SIM ME locked, do you want to unlock" after unbricking.
It ask me about SIM pin and after no signal.
Regards
Click to expand...
Click to collapse
Hi. Please tell me what rom do you have in this moment. How did you soft brick your phone?
Sent from my Lenovo P780
stympy said:
Hi. Please tell me what rom do you have in this moment. How did you soft brick your phone?
Sent from my Lenovo P780
Click to expand...
Click to collapse
Fool me. I've tried to run CN on russian LiFE ROW with TWRP. You can laugh very loud.
1. unbricked with P780_S136_140306_Lang
cleared IMEI
2. IMEI recovered with Droid Tools
after reboting no gsm signal
3. NVRAM recovered from backup
No success.
SIM cards works fine on other mobile, 911 cal also work on this phone
now running on:
ROM: P780_S226_Life_XVIBE_by_Xakep
Baseband: P780.V23
Last idea is clone p780 (colleague has one) with IMEI change, mac address and sn. Now with which tool it'll be easier?
success
ungbar said:
Fool me. I've tried to run CN on russian LiFE ROW with TWRP. You can laugh very loud.
...
Last idea is clone p780 (colleague has one) with IMEI change, mac address and sn. Now with which tool it'll be easier?
Click to expand...
Click to collapse
Last idea also faild.
And I have done it again.
1. Full format
2. Download Rom P780_S136_140306_Lang
3. Change IMEI
And it works.

[Q] lenovo p780 rom not working

i connected my lenovo to my computer then suddenly it got power off
then i got a message like encryption unsuccessful and then i hard restet my mobile
then it was just showing start up lenovo
i gave it to the service center now its not even starting
service center guy said that you need to buy a motherboard because ROM is finished
so can you guy help me out that changing motherboard is only option or isa there any other way to get my lenovo p780 alive
please help me ASAP
_frak__ said:
i connected my lenovo to my computer then suddenly it got power off
then i got a message like encryption unsuccessful and then i hard restet my mobile
then it was just showing start up lenovo
i gave it to the service center now its not even starting
service center guy said that you need to buy a motherboard because ROM is finished
so can you guy help me out that changing motherboard is only option or isa there any other way to get my lenovo p780 alive
please help me ASAP
Click to expand...
Click to collapse
Hi. What did you do when first stoped? Did you tried to flash something?
When you plug in to the computer the red light still appear? It is still charging?
What rom did you have 4 or 8 Gb?
What writes on your phone box, it is made before or after 03.2014?
Waiting for answers....
Please quotte me so i can see you are writing to me...
Sent from my Lenovo P780
lenovo rom not working
stympy said:
Hi. What did you do when first stoped? Did you tried to flash something?
When you plug in to the computer the red light still appear? It is still charging?
What rom did you have 4 or 8 Gb?
What writes on your phone box, it is made before or after 03.2014?
Waiting for answers....
Please quotte me so i can see you are writing to me...
Sent from my Lenovo P780
Click to expand...
Click to collapse
i just connect my mobile to my system then i restarted and i got a message that encryption unsuccessful after that i hard restet it and then it was just giving me starting lenovoi screen
after that i give to service center for software upgrade then its not even starting they said that you need to change the motherboard
i had 4 gb version its 2013 model
_frak__ said:
i just connect my mobile to my system then i restarted and i got a message that encryption unsuccessful after that i hard restet it and then it was just giving me starting lenovoi screen
after that i give to service center for software upgrade then its not even starting they said that you need to change the motherboard
i had 4 gb version its 2013 model
Click to expand...
Click to collapse
Did you tried to reflash home another ROM ? Your computer recognize your phone when you plug him to usb cable ? I still try to understand what happent to your phone! if your computer still recognize your phone there is a chance!
You must keep your device manager window open and plug your phone to PC. In the device manager window will appear your preloader for 1 or 2 secconds! That is good. If not is bad!
Do this and tell me what happent!
lenovo p780 encryption unsuccessful
stympy said:
Did you tried to reflash home another ROM ? Your computer recognize your phone when you plug him to usb cable ? I still try to understand what happent to your phone! if your computer still recognize your phone there is a chance!
You must keep your device manager window open and plug your phone to PC. In the device manager window will appear your preloader for 1 or 2 secconds! That is good. If not is bad!
Do this and tell me what happent!
Click to expand...
Click to collapse
sorry for late rely ,
whenever i am connecting my lenovo to my computer its connecting an disconnecting
device manager is showing yellow mark on that unknown device its my phone :crying:
please please help me out
my email address in [email protected]
stympy said:
Did you tried to reflash home another ROM ? Your computer recognize your phone when you plug him to usb cable ? I still try to understand what happent to your phone! if your computer still recognize your phone there is a chance!
You must keep your device manager window open and plug your phone to PC. In the device manager window will appear your preloader for 1 or 2 secconds! That is good. If not is bad!
Do this and tell me what happent!
Click to expand...
Click to collapse
actually its connecting and disconnecting ... after few second that unknown device change its name to MT something and then disconnect
thats all is happening
_frak__ said:
actually its connecting and disconnecting ... after few second that unknown device change its name to MT something and then disconnect
thats all is happening
Click to expand...
Click to collapse
Hi. That means that your computer have some drivers but they are not installed corectly!
Here you will find the drivers: http://forum.xda-developers.com/lenovo-p780/help/lenovo-p780-mt6589-device-hard-bricked-t2890675
Tutorial is still there. Unistall your installed drivers and install what i send you there.
Then try again to flash your ROM.
stympy said:
Hi. That means that your computer have some drivers but they are not installed corectly!
Here you will find the drivers: http://forum.xda-developers.com/lenovo-p780/help/lenovo-p780-mt6589-device-hard-bricked-t2890675
Tutorial is still there. Unistall your installed drivers and install what i send you there.
Then try again to flash your ROM.
Click to expand...
Click to collapse
i installed that mtk drivers
but that lenovousbdriver one is not working in won 8.1
when i was flashing i was getting an error BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)
i dont know what is this
do i need to make a partition of my sd card ?
for internal memory
or something like that please
and really appreciate your help
_frak__ said:
i installed that mtk drivers
but that lenovousbdriver one is not working in won 8.1
when i was flashing i was getting an error BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)
i dont know what is this
do i need to make a partition of my sd card ?
for internal memory
or something like that please
and really appreciate your help
Click to expand...
Click to collapse
Hi. What version of flash tool do you use? Do you have any pc with win 7 that you can try with...
Sent from my Lenovo P780
stympy said:
Hi. What version of flash tool do you use? Do you have any pc with win 7 that you can try with...
Sent from my Lenovo P780
Click to expand...
Click to collapse
i am trying with SP_Flash_Tool_v3.1304.0.119_lenovo-forums.ru
yea i have a win 7 pc shoul i try with that ?
stympy said:
Hi. That means that your computer have some drivers but they are not installed corectly!
Here you will find the drivers: http://forum.xda-developers.com/lenovo-p780/help/lenovo-p780-mt6589-device-hard-bricked-t2890675
Tutorial is still there. Unistall your installed drivers and install what i send you there.
Then try again to flash your ROM.
Click to expand...
Click to collapse
still getting same error
and that lenovo usb driver is also not working it is installed in computer but i cant find any shortcut or app
stympy said:
Did you tried to reflash home another ROM ? Your computer recognize your phone when you plug him to usb cable ? I still try to understand what happent to your phone! if your computer still recognize your phone there is a chance!
You must keep your device manager window open and plug your phone to PC. In the device manager window will appear your preloader for 1 or 2 secconds! That is good. If not is bad!
Do this and tell me what happent!
Click to expand...
Click to collapse
brom error s_dl_pmt_err_no_space (5069)
and in memory test nand flash is not detected
do you have any solution for this
please reply ASAP thanks in advance
_frak__ said:
brom error s_dl_pmt_err_no_space (5069)
and in memory test nand flash is not detected
do you have any solution for this
please reply ASAP thanks in advance
Click to expand...
Click to collapse
Hi. Did you tried SP Flash Tool v5 ? Try with this one and tell me what is going on.
Sent from my Lenovo P780
yes i did that and its not working too

[Q] Lenovo P780 bricked

Hi there,
I need help on my Lenovo P780. I flashed it with P780_ROW_S124_140403_rooted_twrp_gapps ROM, procedure seemed to be ok but, after the green circle, I cannot switch on my smartphone anymore. Power+volumedown doesn't work and power+volumeup+volumedown as well. Now it's not recognized on my win7 pc! I tried to "uninstall" from device manager on my OS and then use the drivers contained in the .rar file "MTK_USB__Driver_GOOOOODDD" suggested some threads ago... but nothing happens, it's still an "unknown device" for Windows.
The only signal of life is the red light when the smartphone is connected to my laptop.
Please help me to solve this brick, I really do not know how to proceed.
Thanks in advance,
enricogambero said:
Hi there,
I need help on my Lenovo P780. I flashed it with P780_ROW_S124_140403_rooted_twrp_gapps ROM, procedure seemed to be ok but, after the green circle, I cannot switch on my smartphone anymore. Power+volumedown doesn't work and power+volumeup+volumedown as well. Now it's not recognized on my win7 pc! I tried to "uninstall" from device manager on my OS and then use the drivers contained in the .rar file "MTK_USB__Driver_GOOOOODDD" suggested some threads ago... but nothing happens, it's still an "unknown device" for Windows.
The only signal of life is the red light when the smartphone is connected to my laptop.
Please help me to solve this brick, I really do not know how to proceed.
Thanks in advance,
Click to expand...
Click to collapse
Reflash again with the corect preloader. You will find one around here.
Sent from my Lenovo P780
stympy said:
Reflash again with the corect preloader. You will find one around here.
Sent from my Lenovo P780
Click to expand...
Click to collapse
Hi stympy and thank you for your kind reply.
Actually I can't flash my phone because my SP Flash Tool doesn't move from 0% in its process.
Shall I try to format it?
Could you please help me explaining the process step by step?
Thanks in advance
enricogambero said:
Hi stympy and thank you for your kind reply.
Actually I can't flash my phone because my SP Flash Tool doesn't move from 0% in its process.
Shall I try to format it?
Could you please help me explaining the process step by step?
Thanks in advance
Click to expand...
Click to collapse
Hi there again!
Seems to me that you have some problems with :
1. SP Flash Tool
2. Drivers!
Tell me what drivers do you use, and what FLASH Tool. In detail!
If this dont work maybe we can establish a connection with teamviewer, so i can see what tools do you use and what ROM.
stympy said:
Hi there again!
Seems to me that you have some problems with :
1. SP Flash Tool
2. Drivers!
Tell me what drivers do you use, and what FLASH Tool. In detail!
If this dont work maybe we can establish a connection with teamviewer, so i can see what tools do you use and what ROM.
Click to expand...
Click to collapse
Hi stympy,
I'm using SP Flash Tool V3.1304.0.sn119 (build: 2013/01/28 11:26 r1073)
About the drivers... I'm using "MTK USB driver" folder that you shared in a thread some time ago... where can I get the version? Here you can find in attachment a png screenshot, as you can see date modify of the files in the package. Unfortunately I can't get info from my Windows device manager because of the actual "unknown device" recognition of my P780
just in case, ok for the teamviewer session, thank you for your availability!
enricogambero said:
Hi stympy,
I'm using SP Flash Tool V3.1304.0.sn119 (build: 2013/01/28 11:26 r1073)
About the drivers... I'm using "MTK USB driver" folder that you shared in a thread some time ago... where can I get the version? Here you can find in attachment a png screenshot, as you can see date modify of the files in the package. Unfortunately I can't get info from my Windows device manager because of the actual "unknown device" recognition of my P780
just in case, ok for the teamviewer session, thank you for your availability!
Click to expand...
Click to collapse
Hi there,
it seems that now the device is recognized by Win7 because it finished its driver installation.
In the device manager now I see a "MediaTek DA USB VCOM (Android) (COM11)"; anyway, I downloaded the latest version of SPFTools (v5.1352.01) but both of the instances stops at "searching" time and 0% of the flashing process.
Could please someone advise?
Thank you!
Try to make sure the device is fully turned off. try to press the red button beside the battery. And then reconnect the cable while it is in the mode "Searching".. if it does not connect .. try unplugging and replugging it again.
handshake1234 said:
Try to make sure the device is fully turned off. try to press the red button beside the battery. And then reconnect the cable while it is in the mode "Searching".. if it does not connect .. try unplugging and replugging it again.
Click to expand...
Click to collapse
After pressing the red button it got it up, thank you handshake1234. But flashing process stops later with the same error of the last ROM I tried to flash yesterday (attached).
Is that meaning I used another time a uncompatible ROM?
(Yesterday) S124_140403_rooted_twrp_gapps
(Today) P780_ROW_S123_131231_rooted_twrp_gapps
both for ROW.
Can anyone say something about the attached png error?
Thanks!
enricogambero said:
After pressing the red button it got it up, thank you handshake1234. But flashing process stops later with the same error of the last ROM I tried to flash yesterday (attached).
Is that meaning I used another time a uncompatible ROM?
(Yesterday) S124_140403_rooted_twrp_gapps
(Today) P780_ROW_S123_131231_rooted_twrp_gapps
both for ROW.
Can anyone say something about the attached png error?
Thanks!
Click to expand...
Click to collapse
Try to flash with this preloader!
stympy said:
Try to flash with this preloader!
Click to expand...
Click to collapse
It worked!!! Thank you both very much for your help! You saved my phone!
enricogambero said:
It worked!!! Thank you both very much for your help! You saved my phone!
Click to expand...
Click to collapse
enrico, what did you do to let win7 recognize your phone ?
did you change try sereval cables etc ?
thank you
khubayb1 said:
enrico, what did you do to let win7 recognize your phone ?
did you change try sereval cables etc ?
thank you
Click to expand...
Click to collapse
hi khubayb1,
I only pressed for a few seconds the small red button near the battery. I think it's like a harder reset. after pressing it, I tryied back to connect the phone to my pc and... voilĂ !
enricogambero said:
It worked!!! Thank you both very much for your help! You saved my phone!
Click to expand...
Click to collapse
I have the same problem. Sh1ts started when I try to make backups. First, Mobileuncle said: no sd card?' No sdcard0,nosdcard1. So I didn't make backup on my IMEI's. But that is is my little problem. Generally, I saw that there were 2 versions: 4gb Chinese and 8gb row. So i opened explorer and saw 8gb storage. I thoght that I'm row. But I coudn't see version of my rom. Whatever, I decided to flash Russian version VIBE 2.0 lite etc. with replaced files for 8gb. Instled drivers and flashtool. It always gave me same error: DRAM FAIL 4032. Then, I tried to flash cust. recovery for the model. After flashing recovery it wen into a brick or bootloop. Now the screen wan't turn on. I read your guidens above, but when I try to flash stock rom it says: dram fail 4032, cant change preloader with yours couse mdchecksum doesn 't get right. When i try to flash to flash Russian VIBE with your pleloader it says not enogh space 1011. I think the drivers work properly, because spft recognizes the device and see it on com8 etc...
I am really upset... please anwer. Thank you for being there for us.
Go_to_sleep said:
I have the same problem. Sh1ts started when I try to make backups. First, Mobileuncle said: no sd card?' No sdcard0,nosdcard1. So I didn't make backup on my IMEI's. But that is is my little problem. Generally, I saw that there were 2 versions: 4gb Chinese and 8gb row. So i opened explorer and saw 8gb storage. I thoght that I'm row. But I coudn't see version of my rom. Whatever, I decided to flash Russian version VIBE 2.0 lite etc. with replaced files for 8gb. Instled drivers and flashtool. It always gave me same error: DRAM FAIL 4032. Then, I tried to flash cust. recovery for the model. After flashing recovery it wen into a brick or bootloop. Now the screen wan't turn on. I read your guidens above, but when I try to flash stock rom it says: dram fail 4032, cant change preloader with yours couse mdchecksum doesn 't get right. When i try to flash to flash Russian VIBE with your pleloader it says not enogh space 1011. I think the drivers work properly, because spft recognizes the device and see it on com8 etc...
I am really upset... please anwer. Thank you for being there for us.
Click to expand...
Click to collapse
Hi.
Go there and download your firmware !
Flash it !
For custom recovery go there and download ROW ONLY recovery(openrecovery-twrp-2.8.4.0rev2-p780row.zip)!
Creeate one folder, unzip the recovery img and Copy the scatter file from your firmware in that folder.
Here is one "small" tutorial for rooting!
If its not working PM me !

[Q] P780 is dead, red light! Tried everything I found via internet

Hi community,
I really thought it is not this hard to flash a phone, but I got into for me unsolvable problems. I tried to flash my phone and I used a step by step tutorial how do to this. With the flash tool, also the green circle appeared at the end, but since then I cannot use my phone.
Afterwards I really tried every driver, every ROM and different flash tools I could find to reflash my phone again, but without success.
Image: http ://fs1.directupload.net /images/150611/lt6jbqqh.png
I get the 4032 error message, and it means that I am using the wrong driver. But I installed different drivers so many times, and its still without sucess. What can I do?
Please help! I would really appreciate it.
Noeeel said:
Hi community,
I really thought it is not this hard to flash a phone, but I got into for me unsolvable problems. I tried to flash my phone and I used a step by step tutorial how do to this. With the flash tool, also the green circle appeared at the end, but since then I cannot use my phone.
Afterwards I really tried every driver, every ROM and different flash tools I could find to reflash my phone again, but without success.
Image: http ://fs1.directupload.net /images/150611/lt6jbqqh.png
I get the 4032 error message, and it means that I am using the wrong driver. But I installed different drivers so many times, and its still without sucess. What can I do?
Please help! I would really appreciate it.
Click to expand...
Click to collapse
Maybe you flashed the wrong preloader!
What is written on your phone box!
Your phone is made after 03.2014 ?
stympy said:
Maybe you flashed the wrong preloader!
What is written on your phone box!
Your phone is made after 03.2014 ?
Click to expand...
Click to collapse
On my phone box it the date 25.09.2014 (on a sticker with a bar code).
Where do I get the right preloader? I tried everything I found, so I am not sure, but lets give it a try! Thank you for your help.
Noeeel said:
On my phone box it the date 25.09.2014 (on a sticker with a bar code).
Where do I get the right preloader? I tried everything I found, so I am not sure, but lets give it a try! Thank you for your help.
Click to expand...
Click to collapse
Hi. Just replace the preloader in your firmware folder , prepare to flash like the last time, open flash tool, load scattre file, delete checksum.imi if exist.... bla bla bla.
Flash with this preloader and tell me if it works !
Good Luck.

Wiko Highway Octa Core 3G 2.0GHz - Need help to enter Meta Mode

Hi everyone.
Hi have a Wiko Highway Octa Core 3G 2.0GHz based on the Mediatek MT6592 SoC.
My phone got bricked and I can't seem to find instructions on how to get it to go into Meta Mode to try and flash it, since this phone does not have a removable battery and the instructions that I find are not specific for this device. And it only has Power, Vol+ and Vol- physical buttons
I did not try to install a custom ROM, this happened re-flashing the original Wiko ROM from http://support.wikomobile.com/maj/HIGHWAY_KITKAT_V19.zip
It doesn't even lit up the charging LED, but I have the MTK Preloader visible in the Windows Device Manager.
SP Flash Tools occasionally detects the UART COM port, but after failing it doesn't anymore until a PC restart, using USB does nothing.
Would this be easier using Linux? I can also try that.
Edit: Using SP Flash Tool 5.1620 and some unsigned MTK Preloader Drivers that I found on http://www.theandroidsoul.com/how-t...omax-huawei-oppo-phillips-vivo-zte-etc-82090/
Thank you.
Bless! S.
Hi everyone.
I was able to unbrick my Wiko Highway Octa Core 2.0 GHz 3G.
I will post the steps later in case someone needs help doing it with detailed info on the preloader drivers, SP Flash Tool and the ROM that I used.
I would still like to know what the Meta Mode is exactly, since this was what bugged me the most.
I even lost sensitivity in my fingers from holding the hardware buttons so many times to try and get the phone to connect like that, but all it was necessary is to connect the USB cable with the phone off, without pressing any button.
Can someone please clarify to me if it's a mode that allows to simply flash new firmware, or is it supposed to activate a type of "hardware USB debug"?
Thank you.
Bless! S.
Sent from my HIGHWAY using XDA-Developers mobile app
Hi Senisi,
I have also ran into this issue like you had. I guess it's properly bricked. Had to buy another phone, but now want to fix my Micromax A350 Canvas Knight. Its the same as your's but co branded from an Indian company check here "www.gsmarena.com/micromax_a350_canvas_knight-5995.php".
If you have time can you please layout the steps to get the phone unbricked. I get to the point where the Preloader keeps appearing and disappearing. This causes my flash to get interrupted. Can't get the preloader to steady, tried different key combination to achieve Meta Mode with no success.
Thanks in advance.
Donald
donald_f said:
Hi Senisi,
I have also ran into this issue like you had. I guess it's properly bricked. Had to buy another phone, but now want to fix my Micromax A350 Canvas Knight. Its the same as your's but co branded from an Indian company check here "www.gsmarena.com/micromax_a350_canvas_knight-5995.php".
If you have time can you please layout the steps to get the phone unbricked. I get to the point where the Preloader keeps appearing and disappearing. This causes my flash to get interrupted. Can't get the preloader to steady, tried different key combination to achieve Meta Mode with no success.
Thanks in advance.
Donald
Click to expand...
Click to collapse
try flashing preloader first! It always works when you have drivers already setupped.Make sure to press power+vol up+vol down simultaneously while connecting with usb,and keep it pressed until flashing starts..no matter even if it shows driver installation!
For more queries,try stepping up here
http://guruzwap.net.ng/how-to-fix-a...wont-come-on-charge-or-show-any-sign-of-life/
Source- Hovatek Forums :good:
I have tried your suggestion nothing worked, preloader driver just keep reloading and interrupts flashing process. I even used different version SP tool still no success.
Mr.Ak said:
try flashing preloader first! It always works when you have drivers already setupped.Make sure to press power+vol up+vol down simultaneously while connecting with usb,and keep it pressed until flashing starts..no matter even if it shows driver installation!
For more queries,try stepping up here
http://guruzwap.net.ng/how-to-fix-a...wont-come-on-charge-or-show-any-sign-of-life/
Source- Hovatek Forums :good:
Click to expand...
Click to collapse
donald_f said:
I have tried your suggestion nothing worked, preloader driver just keep reloading and interrupts flashing process. I even used different version SP tool still no success.
Click to expand...
Click to collapse
Bro do one thing,
http://de.wikomobile.com/scripts/telecharger.php?id=49&type=MAJ
try this by wiko highway..
Mr.Ak said:
Bro do one thing,
http://de.wikomobile.com/scripts/telecharger.php?id=49&type=MAJ
try this by wiko highway..
Click to expand...
Click to collapse
Still no success, tried this on 2 different PC's one with freshly installed Windows. same issue of interruption every time.
Thanks for all your suggestions, hope you got some more for me......
BRO
donald_f said:
Still no success, tried this on 2 different PC's one with freshly installed Windows. same issue of interruption every time.
Thanks for all your suggestions, hope you got some more for me......
Click to expand...
Click to collapse
Bro just uninstall all the drivers from your PC then try my given drivers,it will surely work!
Any windows with 32-bit will do the work except windows XP :3
moreover,can you please elaborate how your knight got bricked?!
https://drive.google.com/open?id=0BxysuRdzsJeWYkNla0g5bU1EWjg
hello, i have wiko highway , after wrong flashing it keeps on connecting and disconnecting , flashed the v19 update via sp flash tool and flashing was successful but the problem still there and phone didnt boot >> tried update v13 and the same . i made full format then reflash, also the same.
please notice that the flashing process succeed every time but phone never boot !
Any suggestions please ?
---------- Post added at 11:26 AM ---------- Previous post was at 11:14 AM ----------
sensis said:
Hi everyone.
I was able to unbrick my Wiko Highway Octa Core 2.0 GHz 3G.
Sent from my HIGHWAY using XDA-Developers mobile app
Click to expand...
Click to collapse
Can u post how u un-bricked ur phone plz ?
And if some one can make a Bin file backup by any chinese tool , i will be so grateful to him.
Sobaro said:
hello, i have wiko highway , after wrong flashing it keeps on connecting and disconnecting , flashed the v19 update via sp flash tool and flashing was successful but the problem still there and phone didnt boot >> tried update v13 and the same . i made full format then reflash, also the same.
please notice that the flashing process succeed every time but phone never boot !
Any suggestions please ?
---------- Post added at 11:26 AM ---------- Previous post was at 11:14 AM ----------
Can u post how u un-bricked ur phone plz ?
And if some one can make a Bin file backup by any chinese tool , i will be so grateful to him.
Click to expand...
Click to collapse
www.canvasknightroms.blogspot.in
Go to the blog,go to stock section and download v3 and flash with sp flash tools,it will work fine

Categories

Resources