Related
Hello Every All!
I have this device name s2 hd lte shv-e120L. Which Is Brick by my mistake. it was a rooted device and i was copying these files
"1. /system/lib/libril.so
2. /system/lib/libsec-ril.so
3. /system/lib/libsecril-client.so
4. /system/lib/libsecril-client-sap.so(4.0.4+)
5. /system/bin/drexe" unfortunately i moved the files to another folder. when the device restart it gives me a logo some thing like that. then i connect the device with pc. and run the odin 3.07 . and select the md5 file which worth about 950 mb.(which has included rom firmware every thing full package). the odin flash modem amss.bin sucessfuly but was stop at when it was flashing system .i retries many times. i change the odin version. odin 3.05 or odin 1.85 but nothing happens i change the flash package. i download the orignal firmware from sammobile. and try to flash. but i was getting some thing like xml...write faild error at the start. then i decide to flash cwm recovery backup. which i has already made before some days. the odin shows some thing like coppying files 2 minutes remaining. getting reponse 2 minutes left. etc . i stoped the flashing and then suddenly my cell was turned off.. and when ever i connect my device it shows me Qhsusb_dload. i installed the drivers. device manager shows me Qualcomm HS-USB Dloader 9008 (com3)..
Then I Take A Serach And Read Out Many Threads . at Last I Go to Vendor And Got The Live Desktop Cd Of Ubunto 12.4 . I Installed. And Download the files Brickfix 1 . Brickfix 2.1 .Pythone. Etc . I Read The Method Posted
http://forum.xda-developers.com/showthread.php?t=1914359&page=7
.i open the Qpst As Admin. Add A Port Name com 3. then i opened the sw name emmcswdownload as admin. i copy paste the files mentioned in the procedure.as i post screenshot. but when ever i click on the download i got the error like that cookie not present , mentioned in the screen shot.i need the sollution of it. i did nt have any jtag. also not able to use this service. i have usb cable s2 (bricked) .internet. pateince.
Plz Suggest me What To Do. If u dont know the situation. plz dont reply.i am really in problem. i needs every kind of help. senior members. developers. and many other freinds welcome to read my thread. still waiting for your replies,
usm125 said:
Hello Every All!
I have this device name s2 hd lte shv-e120L. Which Is Brick by my mistake. it was a rooted device and i was copying these files
"1. /system/lib/libril.so
2. /system/lib/libsec-ril.so
3. /system/lib/libsecril-client.so
4. /system/lib/libsecril-client-sap.so(4.0.4+)
5. /system/bin/drexe" unfortunately i moved the files to another folder. when the device restart it gives me a logo some thing like that. then i connect the device with pc. and run the odin 3.07 . and select the md5 file which worth about 950 mb.(which has included rom firmware every thing full package). the odin flash modem amss.bin sucessfuly but was stop at when it was flashing system .i retries many times. i change the odin version. odin 3.05 or odin 1.85 but nothing happens i change the flash package. i download the orignal firmware from sammobile. and try to flash. but i was getting some thing like xml...write faild error at the start. then i decide to flash cwm recovery backup. which i has already made before some days. the odin shows some thing like coppying files 2 minutes remaining. getting reponse 2 minutes left. etc . i stoped the flashing and then suddenly my cell was turned off.. and when ever i connect my device it shows me Qhsusb_dload. i installed the drivers. device manager shows me Qualcomm HS-USB Dloader 9008 (com3)..
Then I Take A Serach And Read Out Many Threads . at Last I Go to Vendor And Got The Live Desktop Cd Of Ubunto 12.4 . I Installed. And Download the files Brickfix 1 . Brickfix 2.1 .Pythone. Etc . I Read The Method Posted
http://forum.xda-developers.com/showthread.php?t=1914359&page=7
.i open the Qpst As Admin. Add A Port Name com 3. then i opened the sw name emmcswdownload as admin. i copy paste the files mentioned in the procedure.as i post screenshot. but when ever i click on the download i got the error like that cookie not present , mentioned in the screen shot.i need the sollution of it. i did nt have any jtag. also not able to use this service. i have usb cable s2 (bricked) .internet. pateince.
Plz Suggest me What To Do. If u dont know the situation. plz dont reply.i am really in problem. i needs every kind of help. senior members. developers. and many other freinds welcome to read my thread. still waiting for your replies,
Click to expand...
Click to collapse
Ok...first i need to know certain things...
1. Does you device boot into download mode??....if it does then it is not brick its only soft brick and can be revived....:fingers-crossed:
A device that is truly Bricked will not even turn on....it will simply not show anything on the screen...no matter what !!
So if your device boots into download mode then don't worry and don't lose hope...:good:
2. Tell me if it boots into recovery....??
if not ... then try to flash a recovery using odin....
if it does ... then first of all Wipe Data/Cache and Dalvik Cache
copy a rom on your sd card and flash it through the recovery... and then Wipe Data/Cache and Dalvik Cache again...
Let me know if anything helped ... and let me know other updates.... Hope things work for you...
Thanks
Shrewdy said:
Ok...first i need to know certain things...
1. Does you device boot into download mode??....if it does then it is not brick its only soft brick and can be revived....:fingers-crossed:
A device that is truly Bricked will not even turn on....it will simply not show anything on the screen...no matter what !!
So if your device boots into download mode then don't worry and don't lose hope...:good:
2. Tell me if it boots into recovery....??
if not ... then try to flash a recovery using odin....
if it does ... then first of all Wipe Data/Cache and Dalvik Cache
copy a rom on your sd card and flash it through the recovery... and then Wipe Data/Cache and Dalvik Cache again...
Let me know if anything helped ... and let me know other updates.... Hope things work for you...
Thanks
Click to expand...
Click to collapse
Thanks Bro For Your Reply. But My Device Is Totally Hard Bricked. it Does not Turn ON. As i Said i am getting. Qhsusb_dload Mode. that means my device is totally ****ed off.
usm125 said:
Thanks Bro For Your Reply. But My Device Is Totally Hard Bricked. it Does not Turn ON. As i Said i am getting. Qhsusb_dload Mode. that means my device is totally ****ed off.
Click to expand...
Click to collapse
I am not sure... but you can try this guide here ...
http://forum.xda-developers.com/showthread.php?t=1840030
Since it is already bricked... you can take all the chances to revive it....
And i searched on the internet and there is a lot of stuff available for Qhsusb_dload Mode you mentioned above.... take the chances ...:good:
my dear the link you send me is for those phones whose are getting into download mode and turned on. but my phone is dead. bettry is charged.but when ever i am connecting my phone to pc.it does not shows me in odin. the drivers and every thing is properly installed. i needs some one's help who is understanding about my problem. my device is hard brick. it is not going to turn On. also not going into any download mode or recovery...i know there is no way without jtag. but currently jtag is not in my range. so i want turn on it my self. there is alot of members who is eligible to solve my problem. but i think they are busy some where that's why they are not helping me. but i am still waiting ....
Motheboard replacement or JTAG.
MistahBungle said:
Motheboard replacement or JTAG.
Click to expand...
Click to collapse
i am sorry to say but there is a members who can able to fix these problems have a proof take a look here
http://forum.xda-developers.com/showthread.php?t=1914359&page=10
the member name darkspr1te is able to fix my problem and the member E.V.A Too.
1) I call bull**** on that (for the SGS2 at least).
2) If those people are fixing it for you, why are you posting in this thread ?
Bottom line is, if the phone won't boot, you ain't fixing it.
The end.
MistahBungle said:
1) I call bull**** on that (for the SGS2 at least).
2) If those people are fixing it for you, why are you posting in this thread ?
Bottom line is, if the phone won't boot, you ain't fixing it.
The end.
Click to expand...
Click to collapse
i already said in my post if the people's who dont know about my problem should not reply in my thread,
Unfortunately you don't get that option on XDA, you put a thread up, anyone can reply (unless it's a development thread, which this isn't).
My earlier diagnoses of motherboard replacement or JTAG stand.
MistahBungle said:
Unfortunately you don't get that option on XDA, you put a thread up, anyone can reply (unless it's a development thread, which this isn't).
My earlier diagnoses of motherboard replacement or JTAG stand.
Click to expand...
Click to collapse
These Things Are Not in MY Range.
Then your phone stays busted *shrugs*
MistahBungle said:
Then your phone stays busted *shrugs*
Click to expand...
Click to collapse
i needs help not a sadness..
Hi everyone! I'm asking a desperate help to solve a problem about recovery an almost bricked Huawei G610S-U00.
I tell you the story...
Few days ago I've tried to flash the original firmware of this device with the SP Flash Tool. The firmware has been downloaded from another forum.
The flash procedure ends successfully but when I've tried to reboot the phone it powers on correctly but the screen remain black. I can say it turn on correctly because you can see the back ligth of the screen and you also che feel the vibration pushing the power on button.
Now I think that the problem is due to an wrong scatter file or a wrong firmware version.
Now the situation is that the phone turns on and is recognized by the SP Flash Tool and I can do flashing operations but I need the correct files to flash.
Can anyone help me in this situation?
I really thank everyone could help!
Thank you very much
andbrigo said:
Hi everyone! I'm asking a desperate help to solve a problem about recovery an almost bricked Huawei G610S-U00.
I tell you the story...
Few days ago I've tried to flash the original firmware of this device with the SP Flash Tool. The firmware has been downloaded from another forum.
The flash procedure ends successfully but when I've tried to reboot the phone it powers on correctly but the screen remain black. I can say it turn on correctly because you can see the back ligth of the screen and you also che feel the vibration pushing the power on button.
Now I think that the problem is due to an wrong scatter file or a wrong firmware version.
Now the situation is that the phone turns on and is recognized by the SP Flash Tool and I can do flashing operations but I need the correct files to flash.
Can anyone help me in this situation?
I really thank everyone could help!
Thank you very much
Click to expand...
Click to collapse
No one can help?
Same problem here. I've downloaded a rom and flashed via SPFlash tools and I end at black screen. But once connected to usb the phone is recognized by the PC so it can be flashed if I have the right files. So if possible , someone with G610s , please make a whole backup and give us the file so we can flash . Please !
jazzymc said:
Same problem here. I've downloaded a rom and flashed via SPFlash tools and I end at black screen. But once connected to usb the phone is recognized by the PC so it can be flashed if I have the right files. So if possible , someone with G610s , please make a whole backup and give us the file so we can flash . Please !
Click to expand...
Click to collapse
Hi, I've solved the problem using a full backup given me from a friend.
I upload it to a cloud and then I will give you the link.
:good:
Mine is blank as well
andbrigo said:
Hi, I've solved the problem using a full backup given me from a friend.
I upload it to a cloud and then I will give you the link.
:good:
Click to expand...
Click to collapse
Hi bud, i understand it's an old thread but same thing happened to my G610 U00 and the only option i have is a proper rom for sp flashtool, please if you may, upload the link to the one that saved your phone, thanks ahead!
Hi, I think I am in deep trouble now. My p780 8gb is completely dead after trying to flash a TWRP recovery in to it using a flash tool. Not sure what went wrong I fiddled with some settings in flash tool like 'firmware upgrade' and 'download' and at last saw a Dram failed message. I was using the latest s226 Kitkat ROW. Now all I can see is a red led charging light glowing while connecting it to a computer. The device is not getting recognized by VCOM drivers so no use with flash tool any more. Tried to reboot in to recovery and meta mode but the phone simply does not turn on. Anyone knows how to unbrick this, kindly help.
xperimen said:
Hi, I think I am in deep trouble now. My p780 8gb is completely dead after trying to flash a TWRP recovery in to it using a flash tool. Not sure what went wrong I fiddled with some settings in flash tool like 'firmware upgrade' and 'download' and at last saw a Dram failed message. I was using the latest s226 Kitkat ROW. Now all I can see is a red led charging light glowing while connecting it to a computer. The device is not getting recognized by VCOM drivers so no use with flash tool any more. Tried to reboot in to recovery and meta mode but the phone simply does not turn on. Anyone knows how to unbrick this, kindly help.
Click to expand...
Click to collapse
Hi. Please tell me if your phone is made in 2014. From what i see all phones made in 2014 must be flashed with another preloader. The simptoms you are described here seems that way. Waiting fro reply...
2014 vesrsion
stympy said:
Hi. Please tell me if your phone is made in 2014. From what i see all phones made in 2014 must be flashed with another preloader. The simptoms you are described here seems that way. Waiting fro reply...
Click to expand...
Click to collapse
Hi stympy,
Yes it is a 2014 January version. But to be honest I was using a ROM with 2013 version preloader but never faced any problem, Today purposefully changed it to the new 121kb 2014 preloader and everything was fine till I used the v5 flashtool to flash the twrp and I think I selected the upgrade option in it and flashed the twrp> found the ROM and preloaders from needrom.com from the uploader xxxsadistxxx .It worked flawlessly and then after first booting I configured the wi-fi settings again turned it off and tried to install the custom recovery. Now completely helpless because the phone is not getting detected by VCOM drivers.
xperimen said:
Hi stympy,
Yes it is a 2014 January version. But to be honest I was using a ROM with 2013 version preloader but never faced any problem, Today purposefully changed it to the new 121kb 2014 preloader and everything was fine till I used the v5 flashtool to flash the twrp and I think I selected the upgrade option in it and flashed the twrp> found the ROM and preloaders from needrom.com from the uploader xxxsadistxxx .It worked flawlessly and then after first booting I configured the wi-fi settings again turned it off and tried to install the custom recovery. Now completely helpless because the phone is not getting detected by VCOM drivers.
Click to expand...
Click to collapse
Look what you have to do!
Hi. The think was someting like this:
0. Unzip/Unrar those 2 archives.
1. First i install the .exe file from archive LenovoUsbDriver_autorun_1.0.10.zip. Reboot PC.
2. Plug the phone to your PC and new hardware wizard has appeared. Install the drivers by pressing automaticaly search the drivers.
3. Now power off the phone, and open the Device Manager, in Ports section.
4. With the Device Manager open, plug the phone this time powered off.
5. At this time in Device Manager/ Ports section, appeared for a second or two not in USB area something with.. MTK65...
6. Double Click fast on it because that will desapear very fast . If you missed the click for the first time unplug and replug the phone after about 5 seconds.
7. After you clicked on it all you have to do is update driver from MTK_USB__Driver_GOOOOODDD.rar archive, and voila you have drivers installed and now all you have to do is to flash you ROM.
Hope this will help you.
Tell me iff something goes wrong.
Good luck.
help
stympy said:
Look what you have to do!
Hi. The think was someting like this:
1. First i install the .exe file from archive LenovoUsbDriver_autorun_1.0.10.zip. Reboot PC.
2. Plug the phone to your PC and new hardware wizard has appeared. Install the drivers by pressing automaticaly search the drivers.
3. Now power off the phone.
4. Again plug the phone this time powered off.
5. At this time in Device Manager appeared for a second or two not in USB area something with.. MTK65...
6. Click very fast on it because that will desapear fast.
7. After you clicked on it all you have to do is update driver from MTK_USB__Driver_GOOOOODDD.rar archive, and voila you have drivers installed and now all you have to do is to flash you ROM.
Hope this will help you.
Tell me iff something goes wrong.
Good luck.
Click to expand...
Click to collapse
1) Hi, thanks for the troubleshooting steps but for the 3rd and 4th step, the phone is always in a switched off mode only. It simply doesn't get turn on in any mode.
2) I am using Windows 8.1 OS and Lenovo Usb Driver1.0.10 and VCOM drivers are already installed in it after turning off the digital signature check in win 8x OS and now nothing is happening after clicking on install option of LenovoUsbDriver_autorun_1.0.10.exe Is it a problem or in other OS also it wont prompt to click next or something like in a regular driver installation.
3) Phone is not getting detected in device manager after connecting it, so cant update drivers
Please suggest me what to do next.
xperimen said:
1) Hi, thanks for the troubleshooting steps but for the 3rd and 4th step, the phone is always in a switched off mode only. It simply doesn't get turn on in any mode.
2) I am using Windows 8.1 OS and Lenovo Usb Driver1.0.10 and VCOM drivers are already installed in it after turning off the digital signature check in win 8x OS and now nothing is happening after clicking on install option of LenovoUsbDriver_autorun_1.0.10.exe Is it a problem or in other OS also it wont prompt to click next or something like in a regular driver installation.
3) Phone is not getting detected in device manager after connecting it, so cant update drivers
Please suggest me what to do next.
Click to expand...
Click to collapse
Ok. Try this:
1. Open the back case of your phone.
1.1 Open the device manager on your PC.
2. You will find there an small red button.
3. Now plug your phone to your PC.
4. After you plugged the phone press the red button for 20 secconds.not optional
5. Release the button and see what is going on in your device manager.
6. Iff your preloader is messed up something should going on.
7. Should appear something like new hardware detected, that is the point when you update the drivers, and your phone will be detected by your PC
8. Try this and tell me if something goes wrong.
Good luck.
Sent from my Lenovo P780
TWRP magic
stympy said:
Ok. Try this:
1. Open the back case of your phone.
1.1 Open the device manager on your PC.
2. You will find there an small red button.
3. Now plug your phone to your PC.
4. After you plugged the phone press the red button for 20 secconds.not optional
5. Release the button and see what is going on in your device manager.
6. Iff your preloader is messed up something should going on.
7. Should appear something like new hardware detected, that is the point when you update the drivers, and your phone will be detected by your PC
8. Try this and tell me if something goes wrong.
Good luck.
Sent from my Lenovo P780
Click to expand...
Click to collapse
Hi thanks a lot stympy. I am glad that you were spending the time and effort to help me. I saw that red button trouble shooting post in your TWRP thread and luckily for me after clicking on different options in device manager while setting a complete format in sp flashtool the device suddenly got detected and format was done. After the format the device has lost its imei number, BT code and Wlan codes. That was going to be a hectic job to reinstall imei with imei repairing tools and usage of Hexa editor for BT and wi-fi codes just because some drivers were not getting installed properly.. But to my sheer luck I had a "Data' back up in TWRP with my previous version prerooted rom . I was not that confident to get a restore of imei , BT and wlan codes because it is just a 'data' back up not full ROM. I ticked the md5 checksum and voila after installing the back up 'Data' everything , absolutely every single code in my p780 got reinstalled automatically .LONG LIVE TWRP DEVELOPERS......... May be even after formatting the complete flash drive of the phone it still keeps the imei and other codes in factory mode. I am not sure. Now phone is in perfect condition and I am ready for another go. Stympy please create a 2.7.1 twrp for 2014 preloader p780 8gb. thanks again for all your help
xperimen said:
Hi thanks a lot stympy. I am glad that you were spending the time and effort to help me. I saw that red button trouble shooting post in your TWRP thread and luckily for me after clicking on different options in device manager while setting a complete format in sp flashtool the device suddenly got detected and format was done. After the format the device has lost its imei number, BT code and Wlan codes. That was going to be a hectic job to reinstall imei with imei repairing tools and usage of Hexa editor for BT and wi-fi codes just because some drivers were not getting installed properly.. But to my sheer luck I had a "Data' back up in TWRP with my previous version prerooted rom . I was not that confident to get a restore of imei , BT and wlan codes because it is just a 'data' back up not full ROM. I ticked the md5 checksum and voila after installing the back up 'Data' everything , absolutely every single code in my p780 got reinstalled automatically .LONG LIVE TWRP DEVELOPERS......... May be even after formatting the complete flash drive of the phone it still keeps the imei and other codes in factory mode. I am not sure. Now phone is in perfect condition and I am ready for another go. Stympy please create a 2.7.1 twrp for 2014 preloader p780 8gb. thanks again for all your help
Click to expand...
Click to collapse
WARRNING This are only for 8GB PHONES.
Here you are.
Try to flash with scatter files one by one till works.
Use only SP Flash Tool 5.
After flashing TWRP do not reboot the phone, start the phone with Power button Vol + and Vol - pressed. NOT OPTIONAL
Be carrefoul to select Download not Firmware Upgrade.
Good Luck.
Thank you stympy master
stympy said:
WARRNING This are only for 8GB PHONES.
Here you are.
Try to flash with scatter files one by one till works.
Use only SP Flash Tool 5.
After flashing TWRP do not reboot the phone, start the phone with Power button Vol + and Vol - pressed. NOT OPTIONAL
Be carrefoul to select Download not Firmware Upgrade.
Good Luck.
Click to expand...
Click to collapse
whoaa...that worked.. the 1st scatter file just worked..thanks a lot Sir stympy. Thank you very much
xperimen said:
whoaa...that worked.. the 1st scatter file just worked..thanks a lot Sir stympy. Thank you very much
Click to expand...
Click to collapse
You are wellcome. Glad to help
stympy said:
You are wellcome. Glad to help
Click to expand...
Click to collapse
Hey Stympy, you seem to know quite a lot about this! I have the same problem with my p780 4GB. After flashing everything seemed ok, as I got a green circle in SPFlash tools. However now I am not able to boot anymore. When connecting my phone to my computer the red light goes on and Device Manager shows a new MTK USB Port. When pushing the red button it immediately disappears. Does not matter if I push it for 20 seconds, as soon as I let go its bak in device manager.
When trying to reflash using SPFlash, it seems to recognize my phone, but when trying to format or Upgrade or Download, the red bar only loads up to 141776 Bytes and stops. Sometimes I have to push the red button for the phone to get recognized.
Any help would be greatly appreciated!
ps: CMIIT ID on the battery says 2013xxxxxxx so I guess its a 2013 model?
jeerome88 said:
Hey Stympy, you seem to know quite a lot about this! I have the same problem with my p780 4GB. After flashing everything seemed ok, as I got a green circle in SPFlash tools. However now I am not able to boot anymore. When connecting my phone to my computer the red light goes on and Device Manager shows a new MTK USB Port. When pushing the red button it immediately disappears. Does not matter if I push it for 20 seconds, as soon as I let go its bak in device manager.
When trying to reflash using SPFlash, it seems to recognize my phone, but when trying to format or Upgrade or Download, the red bar only loads up to 141776 Bytes and stops. Sometimes I have to push the red button for the phone to get recognized.
Any help would be greatly appreciated!
ps: CMIIT ID on the battery says 2013xxxxxxx so I guess its a 2013 model?
Click to expand...
Click to collapse
Hi. Can you tell me what firmware did you have ?
From what you described your phone seems to be from 2014. This are the simptoms when the preloader is messed up.
Look what you should try:
Download from here the preloader: http://forum.xda-developers.com/lenovo-p780/help/lenovo-p780-chineese-speed-version-t2874161
Replace your Curent ROM preloader with the one you downloaded.
Drivers from here: http://forum.xda-developers.com/len...ial-kitkat-t2835605/post55587780#post55587780
Try this one and tell me if somethin goes wrong.
Waiting for Reply.
stympy said:
Hi. Can you tell me what firmware did you have ?
From what you described your phone seems to be from 2014. This are the simptoms when the preloader is messed up.
Look what you should try:
Download from here the preloader: http://forum.xda-developers.com/lenovo-p780/help/lenovo-p780-chineese-speed-version-t2874161
Replace your Curent ROM preloader with the one you downloaded.
Drivers from here: http://forum.xda-developers.com/len...ial-kitkat-t2835605/post55587780#post55587780
Try this one and tell me if somethin goes wrong.
Waiting for Reply.
Click to expand...
Click to collapse
Excellent! Did exactly what you said, works like a charm. You made my day Sir! Thank you very much!
jeerome88 said:
Excellent! Did exactly what you said, works like a charm. You made my day Sir! Thank you very much!
Click to expand...
Click to collapse
You are wellcome!
Friend HELP me also
xperimen said:
Hi, I think I am in deep trouble now. My p780 8gb is completely dead after trying to flash a TWRP recovery in to it using a flash tool. Not sure what went wrong I fiddled with some settings in flash tool like 'firmware upgrade' and 'download' and at last saw a Dram failed message. I was using the latest s226 Kitkat ROW. Now all I can see is a red led charging light glowing while connecting it to a computer. The device is not getting recognized by VCOM drivers so no use with flash tool any more. Tried to reboot in to recovery and meta mode but the phone simply does not turn on. Anyone knows how to unbrick this, kindly help.
Click to expand...
Click to collapse
I also want get rid of this bricked p780 8gb updated to kitkat 4.2.2 . Kindly, help me also with step by step procedure I'm totally new to this world. My phone is stuck at Lenovo logo... that it.... Please help me... ;(
apsaujla08 said:
I also want get rid of this bricked p780 8gb updated to kitkat 4.2.2 . Kindly, help me also with step by step procedure I'm totally new to this world. My phone is stuck at Lenovo logo... that it.... Please help me... ;(
Click to expand...
Click to collapse
Hi. Download the rom you need for your phone from here !
Download SP Flash Tool 5 from here!
Download drivers from here and here !
BE CAREFUL USE ONLY WINDOWS 7 ! THIS IS NOT OPTIONAL! IF YOU DONT HAVE WINDOWS 7 LOOK FOR VMWARE AND INSTAL THERE A VIRTUAL MACHINE !
Install first the drivers!
Open SP Flash Tool with admin rights!
Use this tutorial! If you dont manage PM me !
Good Luck!
help me too
jeerome88 said:
Excellent! Did exactly what you said, works like a charm. You made my day Sir! Thank you very much!
Click to expand...
Click to collapse
@stympy your statistics are impressive 1 greeting / 2 posts.
I've hope that I'll be more than just grateful. I've problem with modem in P780 "SIM ME locked, do you want to unlock" after unbricking.
It ask me about SIM pin and after no signal.
Regards
ungbar said:
@stympy your statistics are impressive 1 greeting / 2 posts.
I've hope that I'll be more than just grateful. I've problem with modem in P780 "SIM ME locked, do you want to unlock" after unbricking.
It ask me about SIM pin and after no signal.
Regards
Click to expand...
Click to collapse
Hi. Please tell me what rom do you have in this moment. How did you soft brick your phone?
Sent from my Lenovo P780
stympy said:
Hi. Please tell me what rom do you have in this moment. How did you soft brick your phone?
Sent from my Lenovo P780
Click to expand...
Click to collapse
Fool me. I've tried to run CN on russian LiFE ROW with TWRP. You can laugh very loud.
1. unbricked with P780_S136_140306_Lang
cleared IMEI
2. IMEI recovered with Droid Tools
after reboting no gsm signal
3. NVRAM recovered from backup
No success.
SIM cards works fine on other mobile, 911 cal also work on this phone
now running on:
ROM: P780_S226_Life_XVIBE_by_Xakep
Baseband: P780.V23
Last idea is clone p780 (colleague has one) with IMEI change, mac address and sn. Now with which tool it'll be easier?
success
ungbar said:
Fool me. I've tried to run CN on russian LiFE ROW with TWRP. You can laugh very loud.
...
Last idea is clone p780 (colleague has one) with IMEI change, mac address and sn. Now with which tool it'll be easier?
Click to expand...
Click to collapse
Last idea also faild.
And I have done it again.
1. Full format
2. Download Rom P780_S136_140306_Lang
3. Change IMEI
And it works.
Hi there,
I need help on my Lenovo P780. I flashed it with P780_ROW_S124_140403_rooted_twrp_gapps ROM, procedure seemed to be ok but, after the green circle, I cannot switch on my smartphone anymore. Power+volumedown doesn't work and power+volumeup+volumedown as well. Now it's not recognized on my win7 pc! I tried to "uninstall" from device manager on my OS and then use the drivers contained in the .rar file "MTK_USB__Driver_GOOOOODDD" suggested some threads ago... but nothing happens, it's still an "unknown device" for Windows.
The only signal of life is the red light when the smartphone is connected to my laptop.
Please help me to solve this brick, I really do not know how to proceed.
Thanks in advance,
enricogambero said:
Hi there,
I need help on my Lenovo P780. I flashed it with P780_ROW_S124_140403_rooted_twrp_gapps ROM, procedure seemed to be ok but, after the green circle, I cannot switch on my smartphone anymore. Power+volumedown doesn't work and power+volumeup+volumedown as well. Now it's not recognized on my win7 pc! I tried to "uninstall" from device manager on my OS and then use the drivers contained in the .rar file "MTK_USB__Driver_GOOOOODDD" suggested some threads ago... but nothing happens, it's still an "unknown device" for Windows.
The only signal of life is the red light when the smartphone is connected to my laptop.
Please help me to solve this brick, I really do not know how to proceed.
Thanks in advance,
Click to expand...
Click to collapse
Reflash again with the corect preloader. You will find one around here.
Sent from my Lenovo P780
stympy said:
Reflash again with the corect preloader. You will find one around here.
Sent from my Lenovo P780
Click to expand...
Click to collapse
Hi stympy and thank you for your kind reply.
Actually I can't flash my phone because my SP Flash Tool doesn't move from 0% in its process.
Shall I try to format it?
Could you please help me explaining the process step by step?
Thanks in advance
enricogambero said:
Hi stympy and thank you for your kind reply.
Actually I can't flash my phone because my SP Flash Tool doesn't move from 0% in its process.
Shall I try to format it?
Could you please help me explaining the process step by step?
Thanks in advance
Click to expand...
Click to collapse
Hi there again!
Seems to me that you have some problems with :
1. SP Flash Tool
2. Drivers!
Tell me what drivers do you use, and what FLASH Tool. In detail!
If this dont work maybe we can establish a connection with teamviewer, so i can see what tools do you use and what ROM.
stympy said:
Hi there again!
Seems to me that you have some problems with :
1. SP Flash Tool
2. Drivers!
Tell me what drivers do you use, and what FLASH Tool. In detail!
If this dont work maybe we can establish a connection with teamviewer, so i can see what tools do you use and what ROM.
Click to expand...
Click to collapse
Hi stympy,
I'm using SP Flash Tool V3.1304.0.sn119 (build: 2013/01/28 11:26 r1073)
About the drivers... I'm using "MTK USB driver" folder that you shared in a thread some time ago... where can I get the version? Here you can find in attachment a png screenshot, as you can see date modify of the files in the package. Unfortunately I can't get info from my Windows device manager because of the actual "unknown device" recognition of my P780
just in case, ok for the teamviewer session, thank you for your availability!
enricogambero said:
Hi stympy,
I'm using SP Flash Tool V3.1304.0.sn119 (build: 2013/01/28 11:26 r1073)
About the drivers... I'm using "MTK USB driver" folder that you shared in a thread some time ago... where can I get the version? Here you can find in attachment a png screenshot, as you can see date modify of the files in the package. Unfortunately I can't get info from my Windows device manager because of the actual "unknown device" recognition of my P780
just in case, ok for the teamviewer session, thank you for your availability!
Click to expand...
Click to collapse
Hi there,
it seems that now the device is recognized by Win7 because it finished its driver installation.
In the device manager now I see a "MediaTek DA USB VCOM (Android) (COM11)"; anyway, I downloaded the latest version of SPFTools (v5.1352.01) but both of the instances stops at "searching" time and 0% of the flashing process.
Could please someone advise?
Thank you!
Try to make sure the device is fully turned off. try to press the red button beside the battery. And then reconnect the cable while it is in the mode "Searching".. if it does not connect .. try unplugging and replugging it again.
handshake1234 said:
Try to make sure the device is fully turned off. try to press the red button beside the battery. And then reconnect the cable while it is in the mode "Searching".. if it does not connect .. try unplugging and replugging it again.
Click to expand...
Click to collapse
After pressing the red button it got it up, thank you handshake1234. But flashing process stops later with the same error of the last ROM I tried to flash yesterday (attached).
Is that meaning I used another time a uncompatible ROM?
(Yesterday) S124_140403_rooted_twrp_gapps
(Today) P780_ROW_S123_131231_rooted_twrp_gapps
both for ROW.
Can anyone say something about the attached png error?
Thanks!
enricogambero said:
After pressing the red button it got it up, thank you handshake1234. But flashing process stops later with the same error of the last ROM I tried to flash yesterday (attached).
Is that meaning I used another time a uncompatible ROM?
(Yesterday) S124_140403_rooted_twrp_gapps
(Today) P780_ROW_S123_131231_rooted_twrp_gapps
both for ROW.
Can anyone say something about the attached png error?
Thanks!
Click to expand...
Click to collapse
Try to flash with this preloader!
stympy said:
Try to flash with this preloader!
Click to expand...
Click to collapse
It worked!!! Thank you both very much for your help! You saved my phone!
enricogambero said:
It worked!!! Thank you both very much for your help! You saved my phone!
Click to expand...
Click to collapse
enrico, what did you do to let win7 recognize your phone ?
did you change try sereval cables etc ?
thank you
khubayb1 said:
enrico, what did you do to let win7 recognize your phone ?
did you change try sereval cables etc ?
thank you
Click to expand...
Click to collapse
hi khubayb1,
I only pressed for a few seconds the small red button near the battery. I think it's like a harder reset. after pressing it, I tryied back to connect the phone to my pc and... voilà!
enricogambero said:
It worked!!! Thank you both very much for your help! You saved my phone!
Click to expand...
Click to collapse
I have the same problem. Sh1ts started when I try to make backups. First, Mobileuncle said: no sd card?' No sdcard0,nosdcard1. So I didn't make backup on my IMEI's. But that is is my little problem. Generally, I saw that there were 2 versions: 4gb Chinese and 8gb row. So i opened explorer and saw 8gb storage. I thoght that I'm row. But I coudn't see version of my rom. Whatever, I decided to flash Russian version VIBE 2.0 lite etc. with replaced files for 8gb. Instled drivers and flashtool. It always gave me same error: DRAM FAIL 4032. Then, I tried to flash cust. recovery for the model. After flashing recovery it wen into a brick or bootloop. Now the screen wan't turn on. I read your guidens above, but when I try to flash stock rom it says: dram fail 4032, cant change preloader with yours couse mdchecksum doesn 't get right. When i try to flash to flash Russian VIBE with your pleloader it says not enogh space 1011. I think the drivers work properly, because spft recognizes the device and see it on com8 etc...
I am really upset... please anwer. Thank you for being there for us.
Go_to_sleep said:
I have the same problem. Sh1ts started when I try to make backups. First, Mobileuncle said: no sd card?' No sdcard0,nosdcard1. So I didn't make backup on my IMEI's. But that is is my little problem. Generally, I saw that there were 2 versions: 4gb Chinese and 8gb row. So i opened explorer and saw 8gb storage. I thoght that I'm row. But I coudn't see version of my rom. Whatever, I decided to flash Russian version VIBE 2.0 lite etc. with replaced files for 8gb. Instled drivers and flashtool. It always gave me same error: DRAM FAIL 4032. Then, I tried to flash cust. recovery for the model. After flashing recovery it wen into a brick or bootloop. Now the screen wan't turn on. I read your guidens above, but when I try to flash stock rom it says: dram fail 4032, cant change preloader with yours couse mdchecksum doesn 't get right. When i try to flash to flash Russian VIBE with your pleloader it says not enogh space 1011. I think the drivers work properly, because spft recognizes the device and see it on com8 etc...
I am really upset... please anwer. Thank you for being there for us.
Click to expand...
Click to collapse
Hi.
Go there and download your firmware !
Flash it !
For custom recovery go there and download ROW ONLY recovery(openrecovery-twrp-2.8.4.0rev2-p780row.zip)!
Creeate one folder, unzip the recovery img and Copy the scatter file from your firmware in that folder.
Here is one "small" tutorial for rooting!
If its not working PM me !
Hello,
I recently switched to kitkat but after flashing I realised that the stock rom has too much bloatware and was practically very annoying to use (I'm looking at you, Norton and LeSave.
Now here's my problem:
I can't flash anything anymore using flashtool, it detects my phone, loads one file, but then goes down to 0bytes/0bps and it keeps hanging there untill I get an error. I tried to get a workaround by rooting and installing TWRP it but nothing works, it refuses to root.
Can anyone help me? I don't know what I did wrong and I'm afraid I messed up my partitions or something.
I just want to go back to Jellybean with a clean rom, no bloatware, preferrably rooted.
Thanks in advance,
Biscuit
Errors I get:
''BROM ERROR: S_FT_READBACK_FAIL (4009)''
Google didn't get me any further ):
VoodooBiscuit said:
Hello,
I recently switched to kitkat but after flashing I realised that the stock rom has too much bloatware and was practically very annoying to use (I'm looking at you, Norton and LeSave.
Now here's my problem:
I can't flash anything anymore using flashtool, it detects my phone, loads one file, but then goes down to 0bytes/0bps and it keeps hanging there untill I get an error. I tried to get a workaround by rooting and installing TWRP it but nothing works, it refuses to root.
Can anyone help me? I don't know what I did wrong and I'm afraid I messed up my partitions or something.
I just want to go back to Jellybean with a clean rom, no bloatware, preferrably rooted.
Thanks in advance,
Biscuit
Errors I get:
''BROM ERROR: S_FT_READBACK_FAIL (4009)''
Google didn't get me any further ):
Click to expand...
Click to collapse
You messed up everything!
Hmmm... you need a custom firmware if you want something light !
Like life 0.7 !
If you want a custom made firmware fot the chinese base but without bloatware and rooted you can try Baralajbi firmware.
Good Luck.
stympy said:
You messed up everything!
Hmmm... you need a custom firmware if you want something light !
Like life 0.7 !
If you want a custom made firmware fot the chinese base but without bloatware and rooted you can try Baralajbi firmware.
Good Luck.
Click to expand...
Click to collapse
I have the same exact problem...
I am trying to flash Baralajbi firmware but it goes down to 0bytes/0bps and it keeps hanging there until I get an error.
How can we flash anything (as you advice) if Flash tools do not work?
Partitions are really messed up. In the recovery menu ("No command" screen with dead android ) I am trying the "apply update from sdcard" option , and it redirects me to the internal memory!
Chinese phone , tried P780_ROW_S228 rom but it is laggy and cellural reception is poor ! Gps malfunctioning also...
katsanos said:
I have the same exact problem...
I am trying to flash Baralajbi firmware but it goes down to 0bytes/0bps and it keeps hanging there until I get an error.
How can we flash anything (as you advice) if Flash tools do not work?
Partitions are really messed up. In the recovery menu ("No command" screen with dead android ) I am trying the "apply update from sdcard" option , and it redirects me to the internal memory!
Chinese phone , tried P780_ROW_S228 rom but it is laggy and cellural reception is poor ! Gps malfunctioning also...
Click to expand...
Click to collapse
Hi. Try this. Retry to flash but this time when flash tool do nothing, open the back cover of your phone and keep the red button pressed for 20 seconds. When you release the button flashing process should start.
Tell me if not.
If not... Reinstall the drivers... and repeat the flashing process.
Sent from my Lenovo P780
stympy said:
Hi. Try this. Retry to flash but this time when flash tool do nothing, open the back cover of your phone and keep the red button pressed for 20 seconds. When you release the button flashing process should start.
Tell me if not.
If not... Reinstall the drivers... and repeat the flashing process.
Sent from my Lenovo P780
Click to expand...
Click to collapse
it didn t work.
The moment i press the reset (red) button ,the classic Flash Tools errors appears . The same as before
When you say "reinstall the drivers" what do you mean?
is it the proccess described here? http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
satanduck said:
Open "Device Manager" on your Windows PC.
Plug in your phone through the micro USB cable. A device will show up for a few seconds in "Device Manager". After that, it will disappear again!
Recognize the device tree where it appeared, and wait for it as you unplug and plug in your phone again (if bootloop, its automatic!)
Catch it with a right click as it appears! Then choose "Update Drivers" and pick the directory where you uncompressed the drivers you downloaded above. Its ok if after catching it the device disconnects. You only need to install the drivers now.
Assuming the drivers are correctly installed, run the Smart Phone Flash Tool.
Click to expand...
Click to collapse
katsanos said:
it didn t work.
The moment i press the reset (red) button ,the classic Flash Tools errors appears . The same as before
When you say "reinstall the drivers" what do you mean?
is it the proccess described here? http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
Click to expand...
Click to collapse
Nope
Tutorial and drivers here.
Scroll down to my seccond post.
stympy said:
Nope
Tutorial and drivers here.
Scroll down to my seccond post.
Click to expand...
Click to collapse
Thanks for all your answers. I think its great that you are helping all those people,like me with our stubborn devices!
Tried what you proposed,but No, it didn t work either. Even tried installing the MTK drivers from scratch to an other "clean" laptop, on which i had never before connected my p780... No luck there either. Still Flash Tools refuse to do anything
katsanos said:
Thanks for all your answers. I think its great that you are helping all those people,like me with our stubborn devices!
Tried what you proposed,but No, it didn t work either. Even tried installing the MTK drivers from scratch to an other "clean" laptop, on which i had never before connected my p780... No luck there either. Still Flash Tools refuse to do anything
Click to expand...
Click to collapse
do you have time for a team viewer sesion ?
Yes, of course . I am sending you a pm
Sent from my SM-T310 using Tapatalk
stympy said:
do you have time for a team viewer sesion ?
Click to expand...
Click to collapse
thanks for everything ! :good::good:
everything seems allright now
katsanos said:
thanks for everything ! :good::good:
everything seems allright now
Click to expand...
Click to collapse
You are wellcome!