Related
Hello people !
I rooted my xperia x10 mini pro ! and was trying to flash the mini cm7 ! i flashed it via xrecovery, then i rebooted my device and now it is stuck on sony ericson logo ! what do i do now ? the phone isnt going in recovery too ! Please help me
where can i get the stock firmware nd can i flash it without going in the recovery ?
thanks in advance
tried SEUS? also why u used xrecovery? minicm7 uses cwm.
xp3rto said:
Hello people !
I rooted my xperia x10 mini pro ! and was trying to flash the mini cm7 ! i flashed it via xrecovery, then i rebooted my device and now it is stuck on sony ericson logo ! what do i do now ? the phone isnt going in recovery too ! Please help me
where can i get the stock firmware nd can i flash it without going in the recovery ?
thanks in advance
Click to expand...
Click to collapse
Whilst your concerns are valid, you have posted this thread in the wrong forum. This doesn't belong in the dev forums, it belongs in the the Question and Answer forums here: http://forum.xda-developers.com/forumdisplay.php?f=1152
P.S. xRecovery is pretty much redundant now for roms higher than Android 2.1 eclair, as ClockWordMod (CWM) Recovery is what everyone uses. There is a .zip you can flash in xRecovery which upgrades the recovery to CWM recovery which will be the recovery you need to install mini cm7, (however if what you say is true, that the moment you turn your phone on and repeatedly press back it doesn't enter xRecovery, then you will need to use Sony Ericsson Update Service or PC Companion or the Sony Ericsson website software page to repair your phone, then you will need to root your phone again and install xRecovery) ; here is that .zip that upgrades your xRecovery to CWM recovery: View attachment CWM3_for_xReC.zip Good luck
and don't post questions in the development forum again! Post them here instead please! : http://forum.xda-developers.com/forumdisplay.php?f=1152
nightwing369 said:
Whilst your concerns are valid, you have posted this thread in the wrong forum. This doesn't belong in the dev forums, it belongs in the the Question and Answer forums here: http://forum.xda-developers.com/forumdisplay.php?f=1152
P.S. xRecovery is pretty much redundant now for roms higher than Android 2.1 eclair, as ClockWordMod (CWM) Recovery is what everyone uses. There is a .zip you can flash in xRecovery which upgrades the recovery to CWM recovery which will be the recovery you need to install mini cm7, (however if what you say is true, that the moment you turn your phone on and repeatedly press back it doesn't enter xRecovery, then you will need to use Sony Ericsson Update Service or PC Companion or the Sony Ericsson website software page to repair your phone, then you will need to root your phone again and install xRecovery) ; here is that .zip that upgrades your xRecovery to CWM recovery: View attachment 867933 Good luck
and don't post questions in the development forum again! Post them here instead please! : http://forum.xda-developers.com/forumdisplay.php?f=1152
Click to expand...
Click to collapse
Opps em extremely sorry
i tried going in the xrecovery many time ! but the phone dosent go ! well actually this isnt my phone , it it my friend's phone , i own a samsung galaxy note !
Any ways thanks for your help !
ill try what u said
thanks again
s0ftcorn said:
tried SEUS? also why u used xrecovery? minicm7 uses cwm.
Click to expand...
Click to collapse
No i didnt try SEUS !
xp3rto said:
No i didnt try SEUS !
Click to expand...
Click to collapse
do it? you will loose your data but... your phone should work again.
I think you anyway need custom kernel for that rom..
you can try fix with seus or you can find the stock rom and flash via flashtool
s0ftcorn said:
do it? you will loose your data but... your phone should work again.
Click to expand...
Click to collapse
OKay thanx
matthias1203 said:
I think you anyway need custom kernel for that rom..
you can try fix with seus or you can find the stock rom and flash via flashtool
Click to expand...
Click to collapse
ill give this a try too ! thanx
xp3rto said:
ill give this a try too ! thanx
Click to expand...
Click to collapse
ok.. i fixed on my x10mini pro with stock rom flas via flash tool
but if you will again flash some custom rom.. don't touch kernel if you didn't unlock bootloader
you can try later flash some custom rom that doesn't need custom kernel
s0ftcorn said:
do it? you will loose your data but... your phone should work again.
Click to expand...
Click to collapse
i cant find seus ! can you please give me a link from which i can download it ! thank you
matthias1203 said:
I think you anyway need custom kernel for that rom..
you can try fix with seus or you can find the stock rom and flash via flashtool
Click to expand...
Click to collapse
xp3rto said:
i cant find seus ! can you please give me a link from which i can download it ! thank you
Click to expand...
Click to collapse
http://www.sonyericsson.com/cws/sup...ject/pccompanion/xperiax10minipro?cc=hr&lc=hr
but I never use that.. only flash tool
matthias1203 said:
http://www.sonyericsson.com/cws/sup...ject/pccompanion/xperiax10minipro?cc=hr&lc=hr
Click to expand...
Click to collapse
Thanx bro , i downloaded the seus !
What should i do now , i mean how should i connect the phone !
matthias1203 said:
I think you anyway need custom kernel for that rom..
you can try fix with seus or you can find the stock rom and flash via flashtool
Click to expand...
Click to collapse
basically you need to read the instructions how to install the rom
xp3rto said:
Thanx bro , i downloaded the seus !
What should i do now , i mean how should i connect the phone !
Click to expand...
Click to collapse
i don't know.. i never use that program.. but I think that program is userfrinedly and you will find the way.. if not look for help again.. maybe someone will answer.
do you use x10 mini pro od x10 mini
SEUS ist the Sony Ericsson update stuff of course you can use flashtool, but for somekind of "global reset" i recommend using SEUS.
matthias1203 said:
i don't know.. i never use that program.. but I think that program is userfrinedly and you will find the way.. if not look for help again.. maybe someone will answer.
do you use x10 mini pro od x10 mini
Click to expand...
Click to collapse
x10 mini pro
s0ftcorn said:
SEUS ist the Sony Ericsson update stuff of course you can use flashtool, but for somekind of "global reset" i recommend using SEUS.
Click to expand...
Click to collapse
can u give me instructions how to use the sues
Done
Thanks all of u !! i am very great full to u my phone works now
hi, recently i have installed some MIUI rom on my neo v, and was working perfect. but i wanted to go back to the stock roms, but i had a problem, and it was that it would take about 2 hours for every percent (using flashtool) !!! so i tried changing kernels, and the problem presisted, until i dont know how, i removed the kernel, and i couldn't install one again cuz it said that for doing so, i need to root my phone.
so basically, i have a phone without kernel and rom! can anyone help me fix it?
You don't need to root your phone to flash kernels. Flash kernels using fastboot. Do you have a nandroid backup?
Flash a stock ftf, sounds like you might have relocked your bootloader
Sent from my MT11i using xda app-developers app
Abhilesh7 said:
You don't need to root your phone to flash kernels. Flash kernels using fastboot. Do you have a nandroid backup?
Click to expand...
Click to collapse
i know, but my when i want to change it with flashtool, it says you should have your phone rooted. and no, but i have a backup made by "Tool Box" and i dont know how to restore it! can you help me with that?
mpiekp said:
Flash a stock ftf, sounds like you might have relocked your bootloader
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
well im only trying to flash a stock ftf, but im having the problem i said before!
and i have tried to do it in locked and unlocked bootloader, but there was no difference!
how many pc programs are there that can flash a rom?
is there any that can flash MIUI or CM roms (i mean zip ones)?
Flashtool for flash firmware like FTF file or flash kernel.
Fastboot for flash kernel only.
CWM for flash ROM through SD Card.
If u want revert back to stock.u will need FTF file and the right one flashtool...tick no verification final.
Sorry for my English
Abhilesh7 said:
You don't need to root your phone to flash kernels.
Click to expand...
Click to collapse
Message about root, when flashing kernel, refer to locked/unlocked BL.
root=unlocked BL
SIMMORSAL said:
well im only trying to flash a stock ftf, but im having the problem i said before!
and i have tried to do it in locked and unlocked bootloader, but there was no difference!
Click to expand...
Click to collapse
Do this!
1. Flash any CM kernel from fastboot
2. flash cm9/10 from recovery after rebooting try to flash stock using flashtool! It should work!
Sent from My NeoV on Xperia Ice Cream Pureness build 11!
megatpanji said:
If u want revert back to stock.u will need FTF file and the right one flashtool...tick no verification final.
Click to expand...
Click to collapse
well as i said, i wanted to flash a FTF rom with Flashtool, but it would take too long, and i was afraid that my battery charge drains, so i stopped it.
Madfysh said:
Message about root, when flashing kernel, refer to locked/unlocked BL.
Click to expand...
Click to collapse
Dev Jaskirat said:
1. Flash any CM kernel from fastboot
2. flash cm9/10 from recovery after rebooting try to flash stock using flashtool! It should work!
Click to expand...
Click to collapse
well i tried to change the kernel with fastboot too, but again it gave me "Root error".
so i want to unlock BL again, but i dont know how without "flashtool unlock bootloader" plugin! what are other ways to do that?
btw, thx for quick response!
SIMMORSAL said:
well i tried to change the kernel with fastboot too, but again it gave me "Root error".
so i want to unlock BL again, but i dont know how without "flashtool unlock bootloader" plugin! what are other ways to do that?
btw, thx for quick response!
Click to expand...
Click to collapse
You can use S1 tool! Or the official method is always there! http://forum.xda-developers.com/showthread.php?t=1303960
Always glad to help people!
Sent from My NeoV on Xperia Ice Cream Pureness build 11
So how u unlock your BL before?weird...
i m using unofficial way,the Test Point Method,S1tool.
on the other way official method,search from sony sites...
I'll attempt helping
Let's start with flashing a Stock ftf. U have one already. Use flashtool and do all as instructed. Untick Final Verification. Even if it is 2 hours per percent, just let it run. Perhaps your PC is slow.
And don't worry about battery running out. Did you know that when using recovery, if you remove the battery while the phone is still plugged into the computer, it won't turn off? It should be the same when using flashtool. Don't worry about battery
Once done, boot up your phone to check everything is done. If this worked, PM me, and I'll guide you through a MIUI flash.
You're welcome
1 more thing. Redownload the ftf. Maybe it is buggy.
Hey bro.
Is it fixed? Please let us know
sorry for being late to response!
good news, i fixed it! I dont know why i didn't try it sooner, but i tried flashing it with another pc, and it worked!
now i want some good roms for it,preferably based on JB. what are the bests out there?
BTW, Jass, your theory about "infinite battery while connected to pc" didn't turned out to be true, and it made me buy a direct charger! so please do not do this at home, school or...
when flashing ftf roms check in log to see if it gets stuck in this message [Ending Flash Session] (cuz it wont continue flash anymore)
if yes
plug out the usb
restarst your computer
try different usb ports
SIMMORSAL said:
sorry for being late to response!
good news, i fixed it! I dont know why i didn't try it sooner, but i tried flashing it with another pc, and it worked!
now i want some good roms for it,preferably based on JB. what are the bests out there?
BTW, Jass, your theory about "infinite battery while connected to pc" didn't turned out to be true, and it made me buy a direct charger! so please do not do this at home, school or...
Click to expand...
Click to collapse
perhaps it was different for you. My apologies
Hi to all!
As the title says,I'm a n00b,and i want to learn...
I have a second hand bought Xperia X10i
When I bought it,the guy who sold it to me,installed the FeraLab v20 rom
Everything worked good,but the camera.
The camera said and says it's not available...
So I tried to repair it with SE Pc Companion,but it failed,my phone get bricked,then I get a little scaried because didn't know anything about ANDROID.
After 3 Days got the solution,i flashed a 2.3.3 FW from the Xperia x10 XDA forum,it worked...Now i Have the Phone rooted,flashed,working and installed the xRecovery but the camera keeps saying it's not available.
I have Achtojan's_X10i_6.0.B.0.743_Generic_v2.0 ROM
I tried to get back to 2.1 and run the camfix that i downloaded,but when I flash a 2.1 FW the phone stucks at SE text and can't do anything...
I really need your help,cuz on the forums i didn't found anything that can work...
Can someone give me a solution? Please
Axel12399 said:
Hi to all!
As the title says,I'm a n00b,and i want to learn...
I have a second hand bought Xperia X10i
When I bought it,the guy who sold it to me,installed the FeraLab v20 rom
Everything worked good,but the camera.
The camera said and says it's not available.....
Click to expand...
Click to collapse
camera on ics rom was not working initially, but now we have a fix, please download and flash this to get your camera working: http://forum.xda-developers.com/showthread.php?t=1938933&page=9
you should download libcamera_update.v0.3.zip
mrd7rs said:
camera on ics rom was not working initially, but now we have a fix, please download and flash this to get your camera working: http://forum.xda-developers.com/showthread.php?t=1938933&page=9
you should download libcamera_update.v0.3.zip
Click to expand...
Click to collapse
Hy,thanks for replying,but I don't have ICS,i have GB 2.3.3
and this is a fix for ICS...
I've got something more to tell,I just installed tho vignette apps,one starts and works,but the everything is black,and with the another,says Initialising... and after 30 sec. it gives me force close or wait app to respond...
And when i run the camera app,after 5 min,my phone get really really hot...Could it be a board problem?
Thanks
forgot fera20 was a gingerbread rom. you can try a different rom and see if its a phone issue, all roms are available here: http://forum.xda-developers.com/showthread.php?t=1849278
mrd7rs said:
forgat fera20 was a gingerbread rom. you can try a different rom and see if its a phone issue, all roms are available here: http://forum.xda-developers.com/showthread.php?t=1849278
Click to expand...
Click to collapse
I have Locked BootLoader,how can I install a ICS rom?
Thanks
for now, you can't because locked phones have a SE-GB kernel, you need to unlock it so you can boot directly to an ICS kernel
try using another gingerbread ROM and see if camera works fine for you
chazy chaz said:
for now, you can't because locked phones have a SE-GB kernel, you need to unlock it so you can boot directly to an ICS kernel
try using another gingerbread ROM and see if camera works fine for you
Click to expand...
Click to collapse
The problem is that when I tried to repair the phone,I got the camera above the phone, the updating camera fw,and I cancelled it because i didn't knew what it was...now i don't know how to get back to 2.1 to install the camera FW...can you help me?
Thanks
Axel12399 said:
The problem is that when I tried to repair the phone,I got the camera above the phone, the updating camera fw,and I cancelled it because i didn't knew what it was...now i don't know how to get back to 2.1 to install the camera FW...can you help me?
Thanks
Click to expand...
Click to collapse
Search for 2.1 ftf file and flash it trough Flashtool like u did it with 2.3.3 when u unbricked ur phone.
Edit: U can find 2.1 generic ROM on this thread:
http://forum.xda-developers.com/showthread.php?t=1749426
Sent from my LT22i using xda app-developers app
neoxx3m said:
Search for 2.1 ftf file and flash it trough Flashtool like u did it with 2.3.3 when u unbricked ur phone.
Edit: U can find 2.1 generic ROM on this thread:
http://forum.xda-developers.com/showthread.php?t=1749426
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
I'll try to flash a generic 2.1,but last time,when i tried to downgrade to 2.1,it got stuck at SE text...
neoxx3m said:
Search for 2.1 ftf file and flash it trough Flashtool like u did it with 2.3.3 when u unbricked ur phone.
Edit: U can find 2.1 generic ROM on this thread:
http://forum.xda-developers.com/showthread.php?t=1749426
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
Hey,just did what you said,i flashed it to 2.1,but now it's stuck on SE logo...
help please!
Axel12399 said:
Hey,just did what you said,i flashed it to 2.1,but now it's stuck on SE logo...
help please!
Click to expand...
Click to collapse
Now try to repair it via PC Companion. If that didnt help go back to 2.3.3 and take it to service, maybe u have hardware problem..
neoxx3m said:
Now try to repair it via PC Companion. If that didnt help go back to 2.3.3 and take it to service, maybe u have hardware problem..
Click to expand...
Click to collapse
I tried to repair it with seus and pc companion,but nothing,then i flashed the 2.3.3 FW,
the camera still not working...so i think it's a hardware problem...thanks anyway...
Hello to everynoe. Neo v user, rooted but bricked phone... Had stock ics kernel rooted with f/w .587. Flashed UHD but changed mind and wanted to downgrade to gb, .62... The mistake? I flashed immediately the f/w, the ftf file... Of course it stuck at the file "system.[i can't remember]" for too long. After that flashed kernel .562 and tried to flash the same f/w but nothing. Now i downloaded .587 ftf, full... What should i do??? My phone stucks at sony logo...
I know i messed it up but,
help... (Desperate)
Can your phone enter flashmode or fsstboot?
venoma333 said:
Can your phone enter flashmode or fsstboot?
Click to expand...
Click to collapse
If you mean connect it to flashtools and be recognized, yes. As try to flash ftf through flashmode.
Well why don't you just flash a stock ftf?
georgiougio said:
If you mean connect it to flashtools and be recognized, yes. As try to flash ftf through flashmode.
Click to expand...
Click to collapse
well if flashtool recognises your device..then just flash the .587ftf using flashtool.. :good:
Edit: Sorry bout the similar reply..was typin when venoma replied
venoma333 said:
Well why don't you just flash a stock ftf?
Click to expand...
Click to collapse
LoneWanderer said:
well if flashtool recognises your device..then just flash the .587ftf using flashtool.. :good:
Edit: Sorry bout the similar reply..was typin when venoma replied
Click to expand...
Click to collapse
I tried to flash ftf stock but it stucks flashing system.sin... Now i m waiting 14min to flash it.... Same percentage... Should i be more patient??
Is your phone's bootloader unlocked?
venoma333 said:
Is your phone's bootloader unlocked?
Click to expand...
Click to collapse
No.
Then try repairing with SEUS.
Use Google to find it.
venoma333 said:
Then try repairing with SEUS.
Use Google to find it.
Click to expand...
Click to collapse
Well, i tried it too but it tells me "You have the latest version"... I ll try again. Does this program has more functions??? Isn't it just for repairing?
The tool is mainly for updating, but sometimes solves issues like yours.
And which version does it say you have?
Oh and can you use adb?
venoma333 said:
The tool is mainly for updating, but sometimes solves issues like yours.
And which version does it say you have?
Oh and can you use adb?
Click to expand...
Click to collapse
The strange is that it doesn't say any version, just phone model, and "You have the latest version"... I try to flash now gb ftf .62 and i will wait how long it takes... Even 45'! Patience. Nothing else i can do!
Yeah well try that for as long as it takes, I can't think of anything that would solve your issue right now
I upload 2 pic to see how s the situation and give some help... When i open it these 2 appear. Forst the logo. Then the other and closes by its own...
What can i do?????
Try flashing just the stock Kernel of your phone version..
Had the same problem three weeks ago, can't flash system.sin . As far as I know, there's no solution for you. Fortunately, I took the phone to a repair centre and my phone was fixed under warranty (bricked while updating with SUS).
TodorSRB said:
Try flashing just the stock Kernel of your phone version..
Click to expand...
Click to collapse
Yes Todor, this is what i ve done many times in the past and what i tried yesterday and i m going to do it now too. It's just that for some reason yesterday it didn't flash system.sin FOR NOTHING after 25'! I ve unistalled flashtools now, cleaned up reg, and i ll set it up again as i ll update my java.
1 quest: is there ANY possibility that flashtools won't work with a well set up system and software???
Ok. Finally flashed succesfully! Just needed other computer because the one i used was TOOOOOO slow... :laugh: :laugh: :laugh: :laugh: :laugh:
This flashtool issue is becoming more and more common... The best thing to do when flashtool fails is to try in another y computer...
Sent from my Xperia Neo V using xda app-developers app
i think my phone is bricked
unlocked bootloader , still trying to root , no cwm or any recovery . flashed a kernel using flashtool . after that , it just restart at sony logo . is it hopeless or can be saved ?
i guess i flashed the wrong kernal and my x10 mini pro is now stuck on the kernal logo
i tried to restore the phone via seus and pcc and they told that i have the last software even if i chose to repair
the pcc keep tilling me that is no software for my device
my phone is dead now please help
husamvanbuuren said:
i guess i flashed the wrong kernal and my x10 mini pro is now stuck on the kernal logo
i tried to restore the phone via seus and pcc and they told that i have the last software even if i chose to repair
the pcc keep tilling me that is no software for my device
my phone is dead now please help
Click to expand...
Click to collapse
what did u flash actually ??
Pras_92 said:
what did u flash actually ??
Click to expand...
Click to collapse
U20_nAa-11_2.6.29.6-nAa-11.ftf
and i flashed all u20 nAa Kernel after the first one didn't run
husamvanbuuren said:
U20_nAa-11_2.6.29.6-nAa-11.ftf
and i flashed all u20 nAa Kernel after the first one didn't run
Click to expand...
Click to collapse
And did you install the ROM after flashing the kernel?
SmG67 said:
And did you install the ROM after flashing the kernel?
Click to expand...
Click to collapse
yes i did
mini cm 7 + 9 + 10
i did everything
and this is a screenshot of pcc
husamvanbuuren said:
yes i did
mini cm 7 + 9 + 10
i did everything
Click to expand...
Click to collapse
If you flash nAa-11 kernel (2.6.29.6-nAa-gb-11), use MiniCM7, although you should you the 13 or 14 version of this kernel with that ROM.
If you flash 2.6.29.6-nAa-jb-03 kernel, use MiniCM10, although you could also use the 2.6.32.61-nAa-jb-06 kernel to run that.
Use the kernel that is recommended in the ROM post to get useful results, they won't just mix and match. If you flash a kernel designed for Gingerbread, neither stock ROM, nor JellyBean (MiniCm10) will run and you will get stuck on the kernel-logo.
So, If you get stuck on the kernel-logo, flashing a different kernel won't help, only installing the proper ROM for that kernel will give you a usable phone.
MiniCM9 is not recommended, if you want to run something higher than Gingerbread (minicm7), then you should go for JellyBean (minicm10).
SmG67 said:
If you flash nAa-11 kernel (2.6.29.6-nAa-gb-11), use MiniCM7, although you should you the 13 or 14 version of this kernel with that ROM.
If you flash 2.6.29.6-nAa-jb-03 kernel, use MiniCM10, although you could also use the 2.6.32.61-nAa-jb-06 kernel to run that.
Use the kernel that is recommended in the ROM post to get useful results, they won't just mix and match. If you flash a kernel designed for Gingerbread, neither stock ROM, nor JellyBean (MiniCm10) will run and you will get stuck on the kernel-logo.
So, If you get stuck on the kernel-logo, flashing a different kernel won't help, only installing the proper ROM for that kernel will give you a usable phone.
MiniCM9 is not recommended, if you want to run something higher than Gingerbread (minicm7), then you should go for JellyBean (minicm10).
Click to expand...
Click to collapse
i tried everything all the kernels with all the roms and the phone keep restarting after the kernel logo
and the pcc + seus wont restore to stock i attached a photo in the previous replay
please help
husamvanbuuren said:
yes i did
mini cm 7 + 9 + 10
i did everything
Click to expand...
Click to collapse
your kernel and rom combination should be proper....just flash nAa-14 kernel, then flash MiniCM7 rom...it will work...
Pras_92 said:
your kernel and rom combination should be proper....just flash nAa-14 kernel, then flash MiniCM7 rom...it will work...
Click to expand...
Click to collapse
i tried and it didn't work
but why the seus and pcc wont restore ???????
husamvanbuuren said:
i tried and it didn't work
but why the seus and pcc wont restore ???????
Click to expand...
Click to collapse
Just provide a screenshot of the error occuring in SEUS.......
Pras_92 said:
Just provide a screenshot of the error occuring in SEUS.......
Click to expand...
Click to collapse
i did its in a previous reply
husamvanbuuren said:
i did its in a previous reply
Click to expand...
Click to collapse
Bro u have provided screenshot of PC Companion...i m asking for SEUS
Pras_92 said:
Bro u have provided screenshot of PC Companion...i m asking for SEUS
Click to expand...
Click to collapse
Results in PC Companion and SEUS will be the same. It's either a regional thing or a provider specific ROM that causes that. Sony will only update original SE ROMs.
Try to flash this with flashtool and see if that solves your problem. It may not actually be 2.1.1.A.0.6 like it says, but it should give you a working phone and probably enable you to update it through PC Companion or SEUS afterwards.
SmG67 said:
Results in PC Companion and SEUS will be the same. It's either a regional thing or a provider specific ROM that causes that. Sony will only update original SE ROMs.
Try to flash this with flashtool and see if that solves your problem. It may not actually be 2.1.1.A.0.6 like it says, but it should give you a working phone and probably enable you to update it through PC Companion or SEUS afterwards.
Click to expand...
Click to collapse
thank you maaaaaan its working 100% really thank you very much
you deserve a medal thaaaaaaanks