i guess i flashed the wrong kernal and my x10 mini pro is now stuck on the kernal logo
i tried to restore the phone via seus and pcc and they told that i have the last software even if i chose to repair
the pcc keep tilling me that is no software for my device
my phone is dead now please help
husamvanbuuren said:
i guess i flashed the wrong kernal and my x10 mini pro is now stuck on the kernal logo
i tried to restore the phone via seus and pcc and they told that i have the last software even if i chose to repair
the pcc keep tilling me that is no software for my device
my phone is dead now please help
Click to expand...
Click to collapse
what did u flash actually ??
Pras_92 said:
what did u flash actually ??
Click to expand...
Click to collapse
U20_nAa-11_2.6.29.6-nAa-11.ftf
and i flashed all u20 nAa Kernel after the first one didn't run
husamvanbuuren said:
U20_nAa-11_2.6.29.6-nAa-11.ftf
and i flashed all u20 nAa Kernel after the first one didn't run
Click to expand...
Click to collapse
And did you install the ROM after flashing the kernel?
SmG67 said:
And did you install the ROM after flashing the kernel?
Click to expand...
Click to collapse
yes i did
mini cm 7 + 9 + 10
i did everything
and this is a screenshot of pcc
husamvanbuuren said:
yes i did
mini cm 7 + 9 + 10
i did everything
Click to expand...
Click to collapse
If you flash nAa-11 kernel (2.6.29.6-nAa-gb-11), use MiniCM7, although you should you the 13 or 14 version of this kernel with that ROM.
If you flash 2.6.29.6-nAa-jb-03 kernel, use MiniCM10, although you could also use the 2.6.32.61-nAa-jb-06 kernel to run that.
Use the kernel that is recommended in the ROM post to get useful results, they won't just mix and match. If you flash a kernel designed for Gingerbread, neither stock ROM, nor JellyBean (MiniCm10) will run and you will get stuck on the kernel-logo.
So, If you get stuck on the kernel-logo, flashing a different kernel won't help, only installing the proper ROM for that kernel will give you a usable phone.
MiniCM9 is not recommended, if you want to run something higher than Gingerbread (minicm7), then you should go for JellyBean (minicm10).
SmG67 said:
If you flash nAa-11 kernel (2.6.29.6-nAa-gb-11), use MiniCM7, although you should you the 13 or 14 version of this kernel with that ROM.
If you flash 2.6.29.6-nAa-jb-03 kernel, use MiniCM10, although you could also use the 2.6.32.61-nAa-jb-06 kernel to run that.
Use the kernel that is recommended in the ROM post to get useful results, they won't just mix and match. If you flash a kernel designed for Gingerbread, neither stock ROM, nor JellyBean (MiniCm10) will run and you will get stuck on the kernel-logo.
So, If you get stuck on the kernel-logo, flashing a different kernel won't help, only installing the proper ROM for that kernel will give you a usable phone.
MiniCM9 is not recommended, if you want to run something higher than Gingerbread (minicm7), then you should go for JellyBean (minicm10).
Click to expand...
Click to collapse
i tried everything all the kernels with all the roms and the phone keep restarting after the kernel logo
and the pcc + seus wont restore to stock i attached a photo in the previous replay
please help
husamvanbuuren said:
yes i did
mini cm 7 + 9 + 10
i did everything
Click to expand...
Click to collapse
your kernel and rom combination should be proper....just flash nAa-14 kernel, then flash MiniCM7 rom...it will work...
Pras_92 said:
your kernel and rom combination should be proper....just flash nAa-14 kernel, then flash MiniCM7 rom...it will work...
Click to expand...
Click to collapse
i tried and it didn't work
but why the seus and pcc wont restore ???????
husamvanbuuren said:
i tried and it didn't work
but why the seus and pcc wont restore ???????
Click to expand...
Click to collapse
Just provide a screenshot of the error occuring in SEUS.......
Pras_92 said:
Just provide a screenshot of the error occuring in SEUS.......
Click to expand...
Click to collapse
i did its in a previous reply
husamvanbuuren said:
i did its in a previous reply
Click to expand...
Click to collapse
Bro u have provided screenshot of PC Companion...i m asking for SEUS
Pras_92 said:
Bro u have provided screenshot of PC Companion...i m asking for SEUS
Click to expand...
Click to collapse
Results in PC Companion and SEUS will be the same. It's either a regional thing or a provider specific ROM that causes that. Sony will only update original SE ROMs.
Try to flash this with flashtool and see if that solves your problem. It may not actually be 2.1.1.A.0.6 like it says, but it should give you a working phone and probably enable you to update it through PC Companion or SEUS afterwards.
SmG67 said:
Results in PC Companion and SEUS will be the same. It's either a regional thing or a provider specific ROM that causes that. Sony will only update original SE ROMs.
Try to flash this with flashtool and see if that solves your problem. It may not actually be 2.1.1.A.0.6 like it says, but it should give you a working phone and probably enable you to update it through PC Companion or SEUS afterwards.
Click to expand...
Click to collapse
thank you maaaaaan its working 100% really thank you very much
you deserve a medal thaaaaaaanks
Related
Friends do not know what to do, I had my x10 and xrecovery rooted, the room was going to install v4.02.1 WB 2.3, when I install all the wipes, but also install a custom Karnel "DoomKernel: modFXP-DooMKernel-v01 CM7FXP-S-(S-series). "
Now my xperia does what he wants, it always hangs on the screen of sony ericcson, few loads an image that says "free xperia project" and from there it does not, and not accessible to xrecovery.
I have tried to repair it with SEUS but it says it is the latest version and dont gives me the option to repair.
The Flashtool shows me many errors when trying to go back to 2.3 stock, and says "Flash aborted" AND NOT TO DO: '(
I hope can help me ...
Sorry for my bad use of English.
Did you try to reinstall xrecovery through Flashtool?
atikabubu said:
Did you try to reinstall xrecovery through Flashtool?
Click to expand...
Click to collapse
Friend me that option is grayed out in the flashtool
my friend flash generic frimware on flash tool version 3.0 there's a help how to revive your x10...
http://forum.xda-developers.com/showthread.php?t=920746
iruganisan said:
my friend flash generic frimware on flash tool version 3.0 there's a help how to revive your x10...
http://forum.xda-developers.com/showthread.php?t=920746
Click to expand...
Click to collapse
It worked! xD but in another PC, I can only dude, I have stock GB ... I have to flash again baseband and Karnel necessary for the room of WB?
And if I wanted to put a custom Karnel with the WB room, which is the correct for install? (DoomKernel)
emmanueldmc said:
It worked! xD but in another PC, I can only dude, I have stock GB ... I have to flash again baseband and Karnel necessary for the room of WB?
And if I wanted to put a custom Karnel with the WB room, which is the correct for install? (DoomKernel)
Click to expand...
Click to collapse
glad to help, it depends on you, as of now im using Doom kernel, but be ware that this kernel can damaged your device if you overclock and use it for a long time.... doom kernel is very fast....
iruganisan said:
glad to help, it depends on you, as of now im using Doom kernel, but be ware that this kernel can damaged your device if you overclock and use it for a long time.... doom kernel is very fast....
Click to expand...
Click to collapse
Friend understand it, but I meant to Karnel of all there is to devo used to prevent what happened to me previously Karnel "DoomKernel: modFXP-CM7FXP DooMKernel-v01-S-(S-series)." That did not answer my xperia ...
CLOSED
it's good to see another DEV joining & enlightening our NEO V Family
i'm on cm9 will try when i am on stock , GREAT WORK THNX
Thanks DEV for developing this kernel as i just tested it on my NEO V on STOCK ROM .62 & it works flawlessly ......
Thanks
Download link not working.
Here is the download link - http://www.mirrorcreator.com/files/0XV5EK6H/kernel.img_links
archijit said:
Download link not working.
Click to expand...
Click to collapse
The link is working fine.I just checked it.
wi fi error with emannxperia rom.
archijit said:
wi fi error with emannxperia rom.
Click to expand...
Click to collapse
The error is probably with the rom and not with the kernel, because with the stock rom works perfectly...
After flashing this kernel my neo v gets rooted on .62 stock ROM ....
but will this rooted ROM work if i change the kernel to something else like nightelf stock kernel .... ???
or have anyone tested it yet ???
let me know ....
piku2008 said:
After flashing this kernel my neo v gets rooted on .62 stock ROM ....
but will this rooted ROM work if i change the kernel to something else like nightelf stock kernel .... ???
or have anyone tested it yet ???
let me know ....
Click to expand...
Click to collapse
Root privileges are integrated in this kernel.So you will not stay rooted almost for sure, if you flash another kernel which is not prerooted...
bbooff said:
Root privileges are integrated in this kernel.So you will not stay rooted almost for sure, if you flash another kernel which is not prerooted...
Click to expand...
Click to collapse
But unfortunately i gave it a try and changed it to nightelf stock kernel 9_0 & rooting is still working ......
piku2008 said:
But unfortunately i gave it a try and changed it to nightelf stock kernel 9_0 & rooting is still working ......
Click to expand...
Click to collapse
Nightelf stock kernel 9_0 is prerooted too...
Thanks this post . I am get root privileges on my neo v. I want to ask , Can i upgrade to android 4.0 official using Sony PC Companion. If android 4.0 is available to update . It can errror or not ?
quachvidat said:
Thanks this post . I am get root privileges on my neo v. I want to ask , Can i upgrade to android 4.0 official using Sony PC Companion. If android 4.0 is available to update . It can errror or not ?
Click to expand...
Click to collapse
You will be able to update normally to ICS using PC companion, but to be ablolutely sure, you better relock your bootloader before the update...
@bbooff: few days ago I flashed ICS beta from sony page, and I used your kernel for hot boot just so I can install zip with superuser stuff.
Today I flashed stock .62fw, and wanted to hot boot with your kernel, but no luck, I needed to flash it in order to boot into CWM.
You got any idea why id did cooperate on ICS and not on clean .62
Also I couldn't do factory reset while I was using your kernel. I guess that is kinda normal as it's not stock kernel, but still I thought it should work
Madfysh said:
@bbooff: few days ago I flashed ICS beta from sony page, and I used your kernel for hot boot just so I can install zip with superuser stuff.
Today I flashed stock .62fw, and wanted to hot boot with your kernel, but no luck, I needed to flash it in order to boot into CWM.
You got any idea why id did cooperate on ICS and not on clean .62
Also I couldn't do factory reset while I was using your kernel. I guess that is kinda normal as it's not stock kernel, but still I thought it should work
Click to expand...
Click to collapse
I have no idea!
The opposite is what should had happened.
I think that if you reinstall 0.62 (using flashtool and not wotan) and then my kernel, everything will be o.k.
If you install a custom kernel, you can do a factory reset through the cwm menu.
bbooff said:
I have no idea!
The opposite is what should had happened.
I think that if you reinstall 0.62 (using flashtool and not wotan) and then my kernel, everything will be o.k.
Click to expand...
Click to collapse
Actually I did used flashtool.
After I flash your kernel I can enter cwm. problem is if I try hot boot it.
and about factory reset, I know we can do it via recovery, but is it normal that we can't do it from phone?
Madfysh said:
Actually I did used flashtool.
After I flash your kernel I can enter cwm. problem is if I try hot boot it.
and about factory reset, I know we can do it via recovery, but is it normal that we can't do it from phone?
Click to expand...
Click to collapse
What exactly do you mean by "hot boot"?
It is normal that you can't do it.
bbooff said:
What exactly do you mean by "hot boot"?
Click to expand...
Click to collapse
fastboot boot boot.img
it allows you to boot with kernel without flashing it.
your kernel is very good.... simple and easy... helped me restore my phone back...
But now i am facing one more problem...
whenever I try to install any other kernel through fastboot, that kernel does not work; instead your kernel starts booting up...
Can you please throw some light on it?
Thnx
Hi, I came from 2.1 baseband M76XX-TSNCJOLYM-53404015. I rooted my x10 mini pro, installed cwm and after that I installed CM7 mini, and now the phone is stuck on the sony ericsson logo. How can I revert this? Is there any metod of flashing original software through windows instead of the recovery on the phone itself?
mrdjibrilo said:
Hi, I came from 2.1 baseband M76XX-TSNCJOLYM-53404015. I rooted my x10 mini pro, installed cwm and after that I installed CM7 mini, and now the phone is stuck on the sony ericsson logo. How can I revert this? Is there any metod of flashing original software through windows instead of the recovery on the phone itself?
Click to expand...
Click to collapse
Which ROM did you choose? If you chose MiniCM7 by nAa it won't work on the stock kernel. You have to either flash a ROM that states to work on stock kernel, or flash the kernel that is recommended by the ROM you chose.
SmG67 said:
Which ROM did you choose? If you chose MiniCM7 by nAa it won't work on the stock kernel. You have to either flash a ROM that states to work on stock kernel, or flash the kernel that is recommended by the ROM you chose.
Click to expand...
Click to collapse
Yes I installed Mini cm but I had no idea about the kernel issue. What should I do now?
mrdjibrilo said:
Yes I installed Mini cm but I had no idea about the kernel issue. What should I do now?
Click to expand...
Click to collapse
If you want to taste GingerBread, go with BPaul's MiniCM7Pro ROM, install it the way you installed MiniCM7, but that one will run on stock kernel. Only downside is that it's a bit slow.
You can speed it up a bit by using These modules.
When you've donwloaded the ROM, open it up with 7-zip or Winrar (don't use the windows native way, it will mess up the proper compression, rendering the ROM unflashable), then navigate to /system/lib/modules and replace the ones in there with the ones from this zip.
After that, install it through CWM onto your phone. Good luck
SmG67 said:
If you want to taste GingerBread, go with BPaul's MiniCM7Pro ROM, install it the way you installed MiniCM7, but that one will run on stock kernel. Only downside is that it's a bit slow.
You can speed it up a bit by using These modules.
When you've donwloaded the ROM, open it up with 7-zip or Winrar (don't use the windows native way, it will mess up the proper compression, rendering the ROM unflashable), then navigate to /system/lib/modules and replace the ones in there with the ones from this zip.
After that, install it through CWM onto your phone. Good luck
Click to expand...
Click to collapse
The problem is I can't access CWM, the phone is stuck on the sony ericsson logo as I've stated above. Can I install any ROM through the pc?
mrdjibrilo said:
The problem is I can't access CWM, the phone is stuck on the sony ericsson logo as I've stated above. Can I install any ROM through the pc?
Click to expand...
Click to collapse
This is true, didn't think about that. The thing is, on the custom kernel used with MiniCM7, CWM is built-in, so there is no need for it to be in the ROM. that is why you lost it. You should be able to just install it again though, but maybe it's best to do a repair with SUS or PC Companion first and then go though the steps again.
SmG67 said:
This is true, didn't think about that. The thing is, on the custom kernel used with MiniCM7, CWM is built-in, so there is no need for it to be in the ROM. that is why you lost it. You should be able to just install it again though, but maybe it's best to do a repair with SUS or PC Companion first and then go though the steps again.
Click to expand...
Click to collapse
I can't boot the phone at all dude, I can't do **** with the companion, what would sus be? Is there any version of odin for SE like there is for samsung?
mrdjibrilo said:
I can't boot the phone at all dude, I can't do **** with the companion, what would sus be? Is there any version of odin for SE like there is for samsung?
Click to expand...
Click to collapse
You're on the SE logo when you boot up the phone, so you CAN do everything with it in regards to repairing firmware (SUS is Sony Update Service, used to be SEUS, Sony-Ericsson Update Service).
And don't be a ****, you've opened a thread here for your problem, and you're getting help, so there is no need in posting the same question again in a different thread.
Look here
SmG67 said:
You're on the SE logo when you boot up the phone, so you CAN do everything with it in regards to repairing firmware (SUS is Sony Update Service, used to be SEUS, Sony-Ericsson Update Service).
And don't be a ****, you've opened a thread here for your problem, and you're getting help, so there is no need in posting the same question again in a different thread.
Look here
Click to expand...
Click to collapse
Sorry but it's not my phone and i went bat**** crazy about this, never happened to me before and i flashed different software on different phones. Thanks for the help thou, you are a good man
mrdjibrilo said:
Sorry but it's not my phone and i went bat**** crazy about this, never happened to me before and i flashed different software on different phones. Thanks for the help thou, you are a good man
Click to expand...
Click to collapse
As long as you don't mess with the bootloader and custom kernels, there is no chance of actually bricking this phone beyond repair There is always a way out.
SmG67 said:
As long as you don't mess with the bootloader and custom kernels, there is no chance of actually bricking this phone beyond repair There is always a way out.
Click to expand...
Click to collapse
Okay, I installed the stock rom through the update service, what would you recommend I do next to get to the mini cm7? Sorry if i'm being a pain in the ass but i would really like to get this working
mrdjibrilo said:
Okay, I installed the stock rom through the update service, what would you recommend I do next to get to the mini cm7? Sorry if i'm being a pain in the ass but i would really like to get this working
Click to expand...
Click to collapse
Take the steps you took to install CWM and then follow my directions in post #4
my boot loader unlocked x10i cant charge and it won't boot it always shows the sony Ericsson logo
but some times after 30 minutes it boots
Reflash it with flahtool (new ROM)
Sent from note, a phone like never before
You have to reflash it...
becase the kernel seem doesnt work or no compatible with your device.
or if you confuse with all of this, you can download sony PC Companion, then repair the phone
Dynemix said:
You have to reflash it...
becase the kernel seem doesnt work or no compatible with your device.
or if you confuse with all of this, you can download sony PC Companion, then repair the phone
Click to expand...
Click to collapse
Yea this app can help you by Update service, or try to flash 1.6 android in ftf file..
GL HF ^^
parkci said:
Yea this app can help you by Update service, or try to flash 1.6 android in ftf file..
GL HF ^^
Click to expand...
Click to collapse
but my phone is bootloader unlocked when i connect to the pc companion repair it says error on repair
jakuburban said:
Reflash it with flahtool (new ROM)
Sent from note, a phone like never before
Click to expand...
Click to collapse
thanks
its a BL unlocked x10 and i tried to flash doomlord kernel with flashtool but it says verification failed and can i try to flash custom roms..??
Yeah, just try to flash a new rom. The kernel will be flashed also if it works.
Sent from note, a phone like never before
jakuburban said:
Yeah, just try to flash a new rom. The kernel will be flashed also if it works.
Sent from note, a phone like never before
Click to expand...
Click to collapse
thanks mate i will try it and report it later..
mahithlal said:
thanks mate i will try it and report it later..
Click to expand...
Click to collapse
Try this [ROM] AOSP JB 4.2.2 - Unlock Bootloader Only, works perfectly fine on my xperia x10i :victory:
http://forum.xda-developers.com/showthread.php?t=2197387
ronaksworld said:
Try this [ROM] AOSP JB 4.2.2 - Unlock Bootloader Only, works perfectly fine on my xperia x10i :victory:
http://forum.xda-developers.com/showthread.php?t=2197387
Click to expand...
Click to collapse
thanks man
but the download links are not working
can anybody suggest a ftf roms working link for my bootloader unlocked x10i bcoz i cant flsh through recovery.
Recently I updated CM7 to my Sony Xperia X10 mini pro.But now i want to update it JBminiProject.I flashed it through Flash tool and installed zip. to it(JBmini.zip).All things are wiped i knew it but my phone is freezing at SE logo,and recovery mode isn't working too.Anyone have solution?.new here..
prisoner08 said:
Recently I updated CM7 to my Sony Xperia X10 mini pro.But now i want to update it JBminiProject.I flashed it through Flash tool and installed zip. to it(JBmini.zip).All things are wiped i knew it but my phone is freezing at SE logo,and recovery mode isn't working too.Anyone have solution?.new here..
Click to expand...
Click to collapse
What? SE-Logo? Doesn't that say enough?
SmG67 said:
What? SE-Logo? Doesn't that say enough?
Click to expand...
Click to collapse
Sony Ericsson logo
Any way to revert to CM7 or go to Recovery mode?..
prisoner08 said:
Any way to revert to CM7 or go to Recovery mode?..
Click to expand...
Click to collapse
You shouldn't have an SE-kernel logo on JB, it should be an nAa-logo Which CM7 ROM were you using before?
first it was original froyo 2.1 then i updated gingerbread(2.3 CM7).
prisoner08 said:
first it was original froyo 2.1 then i updated gingerbread(2.3 CM7).
Click to expand...
Click to collapse
Flash the nAa-JB kernel
SmG67 said:
Flash the nAa-JB kernel[/QUOTE
Can you provide linke for nAa kernal?.There are bunch of kernals here for X10 mini pro so i puzzled.
Click to expand...
Click to collapse
thats my logs in Flashtool
prisoner08 said:
thats my logs in Flashtool
Click to expand...
Click to collapse
I'm a bit puzzled by your flashtool output, even when installing the JB rom on the stock kernel you should still have root access, so I don't know what happened there.
I would suggest this kernel, but you may have to go through flashing back to original 2.1 firmware and go through the rooting process again.
So how to back original firmware will you please elaborate it?.I don't know about reverting.
Bro I reverted my phone to its original firmware by flashing.But dislike its original firmware.please provide me the correct firmware zip of MiniJB or ICS.I also reached at nAa recovery.
prisoner08 said:
Bro I reverted my phone to its original firmware by flashing.But dislike its original firmware.please provide me the correct firmware zip of MiniJB or ICS.I also reached at nAa recovery.
Click to expand...
Click to collapse
If you can flash that kernel i linked to you can use the jbmini firmware you already had with that.