Help restoring to stock | WITHOUT SD CARD - HTC EVO 3D

Hello to all,
so long story short, my Evo 3D GSM sd card slot has died and it doesn't recognize any SD card.
So I want to return to stock so I could claim my warranty.
I spent hours of google-ing but all of the tutorials are using SD card.
I did change a lot of ROMs over the time, but never did install one without SD card so I could really use some help here, no clue where to start even.
Any help would be appreciated.

Never tried it,but as I read once you should be able to use ADB in Recovery. So you may use ADB Sideload or ADB Push.
Gesendet von meinem HTC One X mit Tapatalk
---------- Post added at 06:17 PM ---------- Previous post was at 06:11 PM ----------
Also U can use a RUU. You have to go into Fastboot,and then enter this command in CMD: fastboot getvar version-main
The number shows your version number,so u can look which RUU Version u have to look for.
Before using RUU u maybe have to relock the Bootloader,try once without relocking. If this fails,just lock the Bootloader again and you should be good to go
Greets
Gesendet von meinem HTC One X mit Tapatalk

TouchscreenLover1 said:
Never tried it,but as I read once you should be able to use ADB in Recovery. So you may use ADB Sideload or ADB Push.
Gesendet von meinem HTC One X mit Tapatalk
Click to expand...
Click to collapse
Ty for reply,
I didnt mention all of my modding knowledge on android is put-the-rom-on-sd-card-and-hit-install. :/
Everything else I did was using the tutorials on web.
So I would need a bit more help.
From what I can find on google ADB Sideload is available from Jelly Bean on (im stuck on ICS) and Android Push just gives me generic results about pushing the file to SD card from PC using ADB.
Thank you once more for reply, but I would need just a bit more info to start researching...
I forgot to mention, my phone is GSM and its S-off.

As i wrote,i also never tried,equals that I have no experience with ADB Methods..
Try the RUU Posibility. I edited my post,take a look That should work definitly!
Gesendet von meinem HTC One X mit Tapatalk

Thank you.
I managed to get my version, its 1.22.720.1
I found a list of RUU-s but cannot find nothing with this number.
http://www.androidruu.com/index.php?developer=Shooter
EDIT:
Ok, I found a RUU I need to use, but I have another problem now.
It will not run. I start the exe file and all I get is error shown in ss.
Any idea?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Look at the RUU Number in the .zip... It's 3.28.40x.x
Yours is 1.22.720.1... So it wont work... Look in the Evo3D Thread,there you should find smth
Gesendet von meinem HTC One X mit Tapatalk

TouchscreenLover1 said:
Look at the RUU Number in the .zip... It's 3.28.40x.x
Yours is 1.22.720.1... So it wont work... Look in the Evo3D Thread,there you should find smth
Gesendet von meinem HTC One X mit Tapatalk
Click to expand...
Click to collapse
Here is the list:
http://www.androidruu.com/index.php?developer=Shooter
there is not single Rom that starts with 1.22. :/

Ohh okayy..I'm sorry, I dont know any other solutions... So you have to wait and be patient,till someone with an Evo3D can help you...
Gesendet von meinem HTC One X mit Tapatalk

Related

Bootstrap stuck at M dual core logo

Hi,
i just installed bootstrap because i have a gsm droid razr but it wont go past the dual core logo after boot ...i can solve he problem by holding the power and vol +/- buttons..but cant go into clockwork mod...
plz help
Your Problem is, you had Safestrap installed before. I bet now you don't have enough space in your Preinstall Folder. If I'm right, that folder is bigger on CDMA Devices and used for Safestrap. If you uninstall Safestrap, that folder is still filled and you got no free Space for Bootstrap. I'm not sure about that, but I know Guys got Bootstrap working after they deleted the crap in this Folder. Before you try that, charge your battery and got RSD ready to go
I'll post you an Screenshot of my Preinstall Folder, so you can compare.
BTW: I'm running an Leak
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Gesendet von meinem XT910 mit Tapatalk 2
Safestrap is only for CDMA RAZRs, the person has clearly mentioned that he's on GSM RAZR
I know that, but he had Safestrap installed before (there's another Thread from him)
So now he won't be able to get Bootstrap working.
http://forum.xda-developers.com/showthread.php?p=27241397
Gesendet von meinem XT910 mit Tapatalk 2
yea i know but....i have a mac and i guess rsd doesnt work on a mac...and thanks for looking out to my previous thread...so shud just go and delete the preinstall folder...
Without RSD and Fastboot Files ready I wouldn't try anything! When you stuck on Bootloops after flashing an Custom or delete stuff on your Phone, your Phone will die. Read the Forum about Battery Low failure. You don't wanna walk this way!
Gesendet von meinem XT910 mit Tapatalk 2
HSD-Pilot said:
Without RSD and Fastboot Files ready I wouldn't try anything! When you stuck on Bootloops after flashing an Custom or delete stuff on your Phone, your Phone will die. Read the Forum about Battery Low failure. You don't wanna walk this way!
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
thanks a lot pilot for your help...i have 2 questions...
1.is there not any other method
2.and whether i will be able to upgrade to the official ics when it comes out without going back to factory settings.
thanks... u all r awesum
1. Not for Mac. You run an Android, that's against Apple philosophy
2. When there's nothing deleted on your Phone (especially System Apps) you should be able to get the OTA. Just save your Root with Rootkeeper (Store) and temp. unroot before you run the Update. Not sure about the Safestrap stuff that's now on your Phone. Maybe that could make trouble.
Gesendet von meinem XT910 mit Tapatalk 2
quired entheys
HSD-Pilot said:
1. Not for Mac. You run an Android, that's against Apple philosophy
2. When there's nothing deleted on your Phone (especially System Apps) you should be able to get the OTA. Just save your Root with Rootkeeper (Store) and temp. unroot before you run the Update. Not sure about the Safestrap stuff that's now on your Phone. Maybe that could make trouble.
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
crapple strikes again!!
i will wait for the ota.
thanks
HSD-Pilot said:
1. Not for Mac. You run an Android, that's against Apple philosophy
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
I don't see nothing wrong of having a mac and using android There are people smart enought to buy and use what suit them best and not being a fanboy
Anyway you can use rds lite with a virtual machine

Can't mount ext sd card on recovery

Hi
Iam using a sd card 64gb class 10 on my sgs3.
If I want mount this card in recovery it says error mount external sd card.
I want to create backups on this.
If the phone is bootet all works fine. I can copy files to my sd card or take and save photos on it.
The path to my card is extSdCard. Is this the reason?
Gesendet von meinem GT-I9300 mit Tapatalk 2
xeenon said:
Hi
Iam using a sd card 64gb class 10 on my sgs3.
If I want mount this card in recovery it says error mount external sd card.
I want to create backups on this.
If the phone is bootet all works fine. I can copy files to my sd card or take and save photos on it.
The path to my card is extSdCard. Is this the reason?
Gesendet von meinem GT-I9300 mit Tapatalk 2
Click to expand...
Click to collapse
You dont have to mount the sdcard to create a backup on it.. just choose the option to backup on extsdcard..
If I do that it says to me: can't mount backup path. :/
Gesendet von meinem GT-I9300 mit Tapatalk 2
xeenon said:
If I do that it says to me: can't mount backup path. :/
Gesendet von meinem GT-I9300 mit Tapatalk 2
Click to expand...
Click to collapse
I seems that your sdcard path is not properly mapped...maybe you can flash the recovery again using Odin..or flash the full firmware and then flash recovery..
I flashed the leak from jb li8 and then recovery 6.0.1.2 but it's the same. I tried older recoverys too.
I have no ideas
Gesendet von meinem GT-I9300 mit Tapatalk 2
xeenon said:
I flashed the leak from jb li8 and then recovery 6.0.1.2 but it's the same. I tried older recoverys too.
I have no ideas
Gesendet von meinem GT-I9300 mit Tapatalk 2
Click to expand...
Click to collapse
Try formatting your card again using the phones built in option under Storage in settings..create a backup before you do it..
Or format in the PC in FAT32..
I tried it but it's the same.
While formating I got no errors. The card works very well with any file manager, camera and Gallery.
But no backup with recovery on it :/
I tried different sd cards too. Noones will work on recovery.
Gesendet von meinem GT-I9300 mit Tapatalk 2
After:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before:
xeenon said:
I tried it but it's the same.
While formating I got no errors. The card works very well with any file manager, camera and Gallery.
But no backup with recovery on it :/
I tried different sd cards too. Noones will work on recovery.
Gesendet von meinem GT-I9300 mit Tapatalk 2
Click to expand...
Click to collapse
Well I am stumped..you will have to wait for others to drop in..:good:
try a different recovery....non touch preferably
I tried the version of chain fire v1.5
Now it works perfectly. Many thanks
Gesendet von meinem GT-I9300 mit Tapatalk 2
yay....glad to help

[GSM] How To unbrick- / switch to- the Jelly Bean OTA 982.124.14.XT910.Retail.en.EU

Unbrick & switch to 982.124.14.XT910.Retail.en.EU​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UPDATE April 12th 2013
DON'T USE THIS GUIDE ANYMORE! IF YOU'RE BRICKED, GRAP YOUR JB FASTBOOT FROM HERE
http://forum.xda-developers.com/showthread.php?t=2231289
AND FLASH IT WITH RSD!
Here's an little Tool to switch to the 982.124.14.XT910.Retail.en.EU if you're already flashed the 982.124.14.XT910.Vodafone.en.EU.
It will also help you to unbrick your Device if you messed it up on any [GSM] JB Leak.
Warnig
Use this only if you're running an European or Asia Device!
! You will lose your Root by doing that !
Charge your Battery till 100%, if it's possible
DOWNLOAD
Thanks to Nockz for uploading the complete Packages!
RAZR_RETAIL_EU_JB_UNBRICK.rar
Mirror
OTA-Update.zip
How To
Copy the OTA-Update on your external SD-Card
Extract the RAZR_RETAIL_EU_JB_UNBRICK.rar
Connect your RAZR in AP Fastboot with your PC and start the Unbrick.bat
After the Flash of the System and Kernel hit Power
Boot into Recovery and select Factory Reset
Select apply update from external Storage and the Blur_Version.672.180.41.XT910.Retail.en.EU.zip
Wait until the Installation is completed
Reboot your Device
Wow !! I am gonna b the first to play around mah razr and use this method .. Haha
Btw thx HSD ..
Sent from my Droid Razr HD (4GLTE) using Tapatalk 2
No Problem Dude, let me know if you get in Trouble. But you should be fine after that
So after that we will be on ics ? right?
coz i forget to root my device before update and now i'm stuck.
any way thank you again
Nope, it's just an Solution to unbrick your Device back to JB. There's and never will be an way back to ICS.
Meleor said:
So after that we will be on ics ? right?
coz i forget to root my device before update and now i'm stuck.
any way thank you again
Click to expand...
Click to collapse
from the OP:
Warnig
Use this only if you're running an European or Asia Device!
! You will lose your Root by doing that !
Thank you HSD-pilot
you saved my life.
edit: I'm stuck I can't boot into recovery. I have a bugdroid with a warning signal but I can't go into the recovery.
I try all buttons combination but It won't boot.
Doesn't seem to work on the Vodafone Leak, After flashing I still cannot enter recovery.
AW: [GSM] How To unbrick- / switch to- the Jelly Bean OTA 982.124.14.XT910.Retail.en.
pirondello said:
Doesn't seem to work on the Vodafone Leak, After flashing I still cannot enter recovery.
Click to expand...
Click to collapse
Hit the Vol.buttons exactly @ the same time.
I had some trouble, too. It's since i upgraded to JB. Boot Recovery, let it settle for some seconds and then hit the buttons.
Gesendet von meinem XT890 mit Tapatalk 2
If you are stuck like me
at the bugdroid page hit VOL- et VOL+ at the same time, and you open the recovery
New error: assert failed: motorola.motoflash("tmp/bp.img")
AW: [GSM] How To unbrick- / switch to- the Jelly Bean OTA 982.124.14.XT910.Retail.en.
You wiped Data & Cache? Your downloaded OTA zip isn't corrupt?
Gesendet von meinem XT890 mit Tapatalk 2
elsignor said:
If you are stuck like me
at the bugdroid page hit VOL- et VOL+ at the same time, and you open the recovery
New error: assert failed: motorola.motoflash("tmp/bp.img")
Click to expand...
Click to collapse
Seems ya ota.zip is corrupt or incomplete .. Try to do full wipe before installing .. Ya may get out of this problem then.
Sent from my Droid Razr HD (4GLTE) using Tapatalk 2
---------- Post added at 10:42 PM ---------- Previous post was at 10:41 PM ----------
HSD-Pilot said:
You wiped Data & Cache? Your downloaded OTA zip isn't corrupt?
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
Oops m sorry ya posted the solution earlier then me .. Lolz.. I take lil more time to txt on keyboard.
Ok i am sorry
Sent from my Droid Razr HD (4GLTE) using Tapatalk 2
I'll try again with a new OTA zip.
The previous works when I flash JB yesterday,and yes I do a full wipe.
Let's try again
thanks guys
edit: with the new OTA.zip It works, I'm in JB now. Hope a root solution will come up soon
Didnt work at first, i got failed asset verification error at recovery. So i redownloaded my JB EU.ZIP from your source on 1st post and flashed firmware files that you gave one by one except for system_signed and boot.
Then i repeated your instructions step by step again and it worked
I was so releaved, it was buging me that i got my razr bricked and had to go back to my old phone until we get fastboot files that i cant get my head straight after this just too happy. :highfive: to you HSD-Pilot, would say i <3 you but i am no gayyyy (no offence for someone :laugh.
Glad to hear it worked for you Guys.
Nockz of our Forum here in Germany uploaded an complete Package, including the System_signed. So no need to download the Fastboot anymore. An Mega Mirror will come soon. :good:
HSD-Pilot said:
Glad to hear it worked for you Guys.
Nockz of our Forum here in Germany uploaded an complete Package, including the System_signed. So no need to download the Fastboot anymore. An Mega Mirror will come soon. :good:
Click to expand...
Click to collapse
Well glad to see someone got with the solution to this, people and more over developers like you who dont stay ignorant to minorities (noobs who get bricked) problems are the best of the kind :angel:. There is just no proper way to say thank you, couse thanks is too cheap for guy like you . I just hope self-development of doing this was enough
Hello !
How give back ROOT after install this unbrick ?
AW: [GSM] How To unbrick- / switch to- the Jelly Bean OTA 982.124.14.XT910.Retail.en.
Please, i'm no Developer! I'm just an Crackflasher
Create an Bat File is no Development.
Gesendet von meinem XT910 mit Tapatalk 2
elsignor said:
If you are stuck like me
at the bugdroid page hit VOL- et VOL+ at the same time, and you open the recovery
New error: assert failed: motorola.motoflash("tmp/bp.img")
Click to expand...
Click to collapse
Problem is, I dont get to the bugdroid page. After choosing recovery it takes about 20 seconds and directly jumps into the Invalid Flash Mode page.
AW: [GSM] How To unbrick- / switch to- the Jelly Bean OTA 982.124.14.XT910.Retail.en.
loginvitaly said:
Hello !
How give back ROOT after install this unbrick ?
Click to expand...
Click to collapse
That's the 1Million $ Question. Till now nothing seems to work :thumbdown:
Gesendet von meinem XT910 mit Tapatalk 2

[Q] organize

hello to all XDA developers!!
in last year i unlocket my boot loader and root ed my phone by doomlordv4 program!! and installed CM10 on my hallon!
now i flashed a offical ROM 4.0.4 567
i want to root it by doom lord but ihave problam with process of doomlord!
when i start the program and press a buttom on key board!that say cant conect to daemon!!!
its my main problam!!i turned firewall and nod32 off!!but didnt work!!
any one here can help me??
AW: [Q] organize
kamy0074 said:
hello to all XDA developers!!
in last year i unlocket my boot loader and root ed my phone by doomlordv4 program!! and installed CM10 on my hallon!
now i flashed a offical ROM 4.0.4 567
i want to root it by doom lord but ihave problam with process of doomlord!
when i start the program and press a buttom on key board!that say cant conect to daemon!!!
its my main problam!!i turned firewall and nod32 off!!but didnt work!!
any one here can help me??
Click to expand...
Click to collapse
Your bootloader is unlocked and now there is a easy way to get root!
Flash a corresponding custom kernel to your android version you are using.
ICS kernel for ICS android. There are some you can choose. I can remeber Suave, night elf , lupus, etc.
Gesendet von meinem Galaxy Nexus mit Tapatalk 2
thanks alot man for answer !
but i relock ed my phone and i cant unlock it agine !becouse cant organize my phone{cant connect to daemon}
How to root xperia neo
hello how are you
thanks for guid! but i have some problam after step 4
after i flashed 562 kornel where i have to go to flash it??
AW: [Q] organize
What do you mean where to flash it?
Do the steps described!
The program to use is flash tool. With it you can flash the stock kernel to your phone. That's all.
Gesendet von meinem Galaxy Nexus mit Tapatalk 2
no no
i mean
after iflash 562 kornel what i have to do?
You should connect your mobile to the flashtool with usb debugging on and msc connection mode and unknown sources on and when it shows you that your phone is connected
press at my MT15 and press root and press force emulator then do the rest of the steps
---------- Post added at 04:12 PM ---------- Previous post was at 04:07 PM ----------
Make sure you have the drivers
dude! i flashed MT15I_4.1.A.0.562_Kernel and i connect my phone with usb debugging on and unknown scoures on and flash tools says connected my 15i but when i click on root that stop on waitting for device
what i do then??
here the SS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ho wo adsasw
first of all update your flashtool second thing you should press force emulator
man i updated flash tool to 0.9.10.1 but
how i force emultar ???
idont know pls help me thanks
no one there for help me??
i have problam with cant connect to daemon!
heeeelppppp
Actually,what you are want to do?
Let begin from new process...look one thread here in Xda,you just follow them from the thread
Sent from my Xperia Neo V
megatpanji said:
Actually,what you are want to do?
Let begin from new process...look one thread here in Xda,you just follow them from the thread
Sent from my Xperia Neo V
Click to expand...
Click to collapse
man
can u help me?? so answer my Q
when i run runme.bat in program say cant connect to daemon
Reinstall windows Try to reinstall needed drivers and change USB port...

[ROM][LOLLIPOP][FACTORY IMAGE] Omate TrueSmart +

This is just a factory backup of the new Lollipop ROM for users with the TrueSmart +.
This is *NOT* for the original TrueSmart (yet), so if you format and download this to your original unit (you know, the one not running Lollipop) you will not be able to boot it.
Get the download here: Factory Image (Flash in SP Flash Tool)
Does the word "yet" mean, that you are working on it for the original truesmart?? That whould be awesome!
Gesendet von meinem GT-I9295 mit Tapatalk
i flash success Ok . but bootloop can't start Omate TS Plus ..
---------- Post added at 12:21 PM ---------- Previous post was at 11:22 AM ----------
http://i.imgur.com/tVdslyS.png
i see miss usrdata ? right ?
http://i.imgur.com/tVdslyS.png
Why would you flash this unless you bricked your unit previously?
moviecut said:
Does the word "yet" mean, that you are working on it for the original truesmart?? That whould be awesome!
Gesendet von meinem GT-I9295 mit Tapatalk
Click to expand...
Click to collapse
Yea, I'm working on full root I (have partial) so I can do a proper backup and see if a port works.
kuronosan said:
Why would you flash this unless you bricked your unit previously?
Click to expand...
Click to collapse
now my watch die can't boot . show logo . and don't anything
You still didn't answer my question. Why are you flashing a full backup on a unit that isn't malfunctioning?
New to this, so pardon the ignorance...
Is this file meant to be a back up, in case our TS+ starts to go haywire? As in, I would plug it into the computer, delete all files, and put this file on instead to "reset" it back to the original state? Thanks, your help is appreciated.
kuronosan said:
You still didn't answer my question. Why are you flashing a full backup on a unit that isn't malfunctioning?
Click to expand...
Click to collapse
i think flash file backup in this topic and my watch normal .. but my watch can't boot and suck logo . i don't know (_ _!)
sorry
proxy170 said:
New to this, so pardon the ignorance...
Is this file meant to be a back up, in case our TS+ starts to go haywire? As in, I would plug it into the computer, delete all files, and put this file on instead to "reset" it back to the original state? Thanks, your help is appreciated.
Click to expand...
Click to collapse
These are more or less 1:1 images of the TS+ so yes, in case you somehow need up your watch you should be fine to flash it.
I honestly would only flash the system image, as that would be the only thing you'd need to replace.
LeHoang2206 said:
i think flash file backup in this topic and my watch normal .. but my watch can't boot and suck logo . i don't know (_ _!)
sorry
Click to expand...
Click to collapse
Please contact [email protected] and send back your watch to our service center and we will only make you pay the shipment fee back to you ($20) but it will take a few months from reception and you must use a logistic with a tracking number when you send the unit back to us. The service will cost Omate $40 for this reflashing. In the future do NOT do things you do not know.
OmateDev said:
Please contact [email protected] and send back your watch to our service center and we will only make you pay the shipment fee back to you ($20) but it will take a few months from reception and you must use a logistic with a tracking number when you send the unit back to us. The service will cost Omate $40 for this reflashing. In the future do NOT do things you do not know.
Click to expand...
Click to collapse
2 months too long .
moviecut said:
Does the word "yet" mean, that you are working on it for the original truesmart?? That whould be awesome!
Gesendet von meinem GT-I9295 mit Tapatalk
Click to expand...
Click to collapse
OmateDev said:
In the future do NOT do things you do not know.
Click to expand...
Click to collapse
In the future do NOT buy things you do not know.
Thanks omate.
What is the kernel version of the ts+ rom?
3.10.67
kuronosan said:
3.10.67
Click to expand...
Click to collapse
3.10.67 is ancient, even for Lollipop. If I remember correctly Lolli started at 3.10.62, and last time I looked was up to 3.10.90. So pretty much every commit is missing.
I took a pic of the screen. 3.10.72 is the version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recovery :v Chinaese
LeHoang2206 said:
Recovery :v Chinaese
Click to expand...
Click to collapse
Can you translate the menu options here?
CPGOD said:
Can you translate the menu options here?
Click to expand...
Click to collapse
I try test . But my watch can't boot because kernel or ubin

Categories

Resources