[Q] Please Help - Motorola Droid RAZR

Hello All
I'm new here
I need to know the steps in details to upgrade my moto razr xt910 from ICS to jely bean 4.2.2
Any help !!

Hi!
First you need to install a custom recovery like BMM or SS ! ...than just flash in recovery the new custom rom !
Good luck !

surdu_petru said:
Hi!
First you need to install a custom recovery like BMM or SS ! ...than just flash in recovery the new custom rom !
Good luck !
Click to expand...
Click to collapse
actually I dont have any experience !
should I first make a recovery by using ss , then install the new rom and flash it ?

Yes that is a good place to start safestrap is good to start with and safer just do not flash any thing on the stock slot yet!
Sent from my XT912 using Tapatalk

lara_razr said:
actually I dont have any experience !
should I first make a recovery by using ss , then install the new rom and flash it ?
Click to expand...
Click to collapse
There is a big thread written by Hrshi who made a bunch of tutorials for BMM, etc. For SS you can read on HAshcode's blog "How to Safestrap"

dtrail1 said:
There is a big thread written by Hrshi who made a bunch of tutorials for BMM, etc. For SS you can read on HAshcode's blog "How to Safestrap"
Click to expand...
Click to collapse
safestrap is very easy thanks hashcode

lara_razr said:
Hello All
I'm new here
I need to know the steps in details to upgrade my moto razr xt910 from ICS to jely bean 4.2.2
Any help !!
Click to expand...
Click to collapse
Where are you from? May be you can find your language local site with step-by-step instructions.
Because sometime English is much difficult for newbie.

lara_razr said:
Hello All
I'm new here
I need to know the steps in details to upgrade my moto razr xt910 from ICS to jely bean 4.2.2
Any help !!
Click to expand...
Click to collapse
Honestly i would stay on ICS.Reason because ics roms are more stable and you can over and underclock ICS with motomizor on google play.With jellybean this is not possible atm.As far as kecex 4.2.2+ roms go, you don't need to upgrade to jellybean to beable to use any kecex rom.Once you upgrade to jellybean you cannot downgrade back to ICS.So think hard before you decide what you want to do.
If your looking to just upgrade your stock firmware and don't care about the other stuff i mentioned, then by all means go for it.

Related

[Q] Newbie on flashing a rom

Hi everybody!
A few days ago, i rooted and installed CWMace 4.0.0.9 on my phone. Now, i want to flash a ROM, but i'm confused. These are my questions:
1) I thought about installing a stock rom of this website but i don't know what steps to take :S
2) CyanogenMod will come out officially for SGA?
3) If second question is "no", i thought on install TheMythICS, but in this moment is a beta version. :s
Thanks in advance
Ok try un official cyanogan mod. stock rom's are not that good.first decide which rom u wants To install then .ask for steps and tut on flashing is in sticky thread how to root........
sent from my phone
plzzzz hit thanks if I helped you in any means .......
jorsparrow said:
2) CyanogenMod will come out officially for SGA?
Click to expand...
Click to collapse
yeah we'll get official Cyanogen Check here

CM9 Rom to install replacing Stock ICS

Hi guys
I'm looking for a Deodex ICS CM9 Rom to use as daily and with the possibility of flash replacing the Stock Motorola ICS EU.
Just got the Razr Maxx and althought i have read a lot, i haven't understood exactly what's the reason why some ROMs just can be flashed using Safestrap or Bootmenu, instead a CWM Recovery.
Thanks in advance
(and sorry for my english) :silly:
Nandeh said:
Hi guys
I'm looking for a Deodex ICS CM9 Rom to use as daily and with the possibility of flash replacing the Stock Motorola ICS EU.
Just got the Razr Maxx and althought i have read a lot, i haven't understood exactly what's the reason why some ROMs just can be flashed using Safestrap or Bootmenu, instead a CWM Recovery.
Thanks in advance
(and sorry for my english) :silly:
Click to expand...
Click to collapse
For a daily use , I am using Eclipse 1.5 , I am happy with it ... There are a lot many roms out there you can read individual ROM threads to see if it suits your style of use. To instal safestrap/Eclipse you can see this guide http://forum.xda-developers.com/showthread.php?t=1991253
Suggestion : Before you decide you recovery [CWM /Bootmenu/Safestrap] , first select the ROM you like then flash the recovery....
Developers build the instals based on recovery , they choose CWM/Safestrap .. few ROMS have patched versions to support the other ( ex: eclipse with bootmenu patch) ...
SAJdroid said:
For a daily use , I am using Eclipse 1.5 , I am happy with it ... There are a lot many roms out there you can read individual ROM threads to see if it suits your style of use. To instal safestrap/Eclipse you can see this guide http://forum.xda-developers.com/showthread.php?t=1991253
Suggestion : Before you decide you recovery [CWM /Bootmenu/Safestrap] , first select the ROM you like then flash the recovery....
Developers build the instals based on recovery , they choose CWM/Safestrap .. few ROMS have patched versions to support the other ( ex: eclipse with bootmenu patch) ...
Click to expand...
Click to collapse
Finally I found one that can be used with BootMenu:
http://forum.xda-developers.com/showthread.php?t=1801379
Thanks!

[ROM] JB 4.1.2 98.72.16.XT912.Verizon.en.US / XT910 READY BMM 0.3.4

Stock ROM JB 4.1.2 98.72.16.XT912.Verizon.en.US / XT910 READY BMM 0.3.4​THIS IS JB 4.1.2 FOR XT910​TO INSTALL THIS ROM YOU NEED FLASH NEW VERIZON JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4​MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOT​KERNEL
ROM
artur0588 said:
Stock ROM JB 4.1.2 98.72.16.XT912.Verizon.en.US / XT910 READY BMM 0.3.4​THIS IS JB 4.1.2 FOR XT910​TO INSTALL THIS ROM YOU NEED FLASH NEW VERIZON JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4​MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOT​KERNEL
ROM
Click to expand...
Click to collapse
Right. I'll come back with results.
Debloated and GSM ported?
Thanks
heblu said:
Right. I'll come back with results.
Debloated and GSM ported?
Thanks
Click to expand...
Click to collapse
Yes, no verizon apps and GSM ready. Don't need GSM Patch, everything working.
artur0588 said:
Yes, no verizon apps and GSM ready. Don't need GSM Patch, everything working.
Click to expand...
Click to collapse
Great. In the next few hours I'll be back
once i boot up my device, it says
"Security test failure
Validation of cryptographic module failed, please restart"
i cant get pass that screen, what am i supposed to do after installing the rom
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Any noticeable changes ?
Like my work visit my channel once on YouTube
YouTube.com/user/Therazrguy
heblu said:
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Click to expand...
Click to collapse
hmm im installing it on rom 2, and rom 1 is JBX D-wiz
am i supposed to flash back to verizon jb first before installing ?
danieltang34 said:
once i boot up my device, it says
"Security test failure
Validation of cryptographic module failed, please restart"
i cant get pass that screen, what am i supposed to do after installing the rom
Click to expand...
Click to collapse
You forgot flash new kernel
heblu said:
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Click to expand...
Click to collapse
Hi, cannot download KERNEL, can you please attached it in another way, tks in advance.
danieltang34 said:
hmm im installing it on rom 2, and rom 1 is based JBX D-wiz
am i supposed to flash back to verizon jb first before installing ?
Click to expand...
Click to collapse
first reboot to BMM recovery and flash kernel from OP. then wipe all and install rom
Lzto1320 said:
Hi, cannot download KERNEL, can you please attached it in another way, tks in advance.
Click to expand...
Click to collapse
I have attached in OP
artur0588 said:
i have attached in op
Click to expand...
Click to collapse
tks so much for your work! Great man!!!
Hi, some noobie here, just wanna make sure the following steps are correct before i try, really scared if got bricked:
1. Install BMM 0.3.4 on stock ICS 4.0.4
2. Reboot to BMM, backup CID & whole system
3. Erase CID
4. Flash Kernel
4. Clear data, dalvik, cache
5. Flash ROM into System_1
6. Profit?
Or anything else should i do? Thanks for any suggestion. Sorry if already asked frequently..
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
shakti15 said:
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
This is from the soak test I believe.
hansip87 said:
Hi, some noobie here, just wanna make sure the following steps are correct before i try, really scared if got bricked:
1. Install BMM 0.3.4 on stock ICS 4.0.4
2. Reboot to BMM, backup CID & whole system
3. Erase CID
4. Flash Kernel
4. Clear data, dalvik, cache
5. Flash ROM into System_1
6. Profit?
Or anything else should i do? Thanks for any suggestion. Sorry if already asked frequently..
Click to expand...
Click to collapse
al good
after you have backup CID and your kernel you can restore them just to be sure
you can flash rom in second system (webtop partition). To switch, reboot into BMM, flash desired kernel, reboot
shakti15 said:
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
yes
heblu said:
yes
Click to expand...
Click to collapse
i have a sily question. can we dual boot this rom and flash kernel separately becouse i donnt want to lose my stock rom ics and all apps.
one more question is there a way to backup my whole rom and restore as it is when i want .?
one question more ics will not work on jelly bean kerne.?
thanx in advance for answer my silly question
Screenshots?
This ROM is like the Verizon ROM but without the Verizon apps and for XT910 right? Is the original one, with motoblur?
PatrickDziura said:
Screenshots?
This ROM is like the Verizon ROM but without the Verizon apps and for XT910 right? Is the original one, with motoblur?
Click to expand...
Click to collapse
Yes, original.

[Q] Need help upgrading my razr

Hello guys, here is the thing, my razr is currently on stock 4.0.4 ics ( tried to use safestrap but because I can only boot in bp tools it won`t work ) and I want to upgrade it to jellybean 4.2.
Can I just flash the fastboot file or is there something I should do?
inheme said:
Hello guys, here is the thing, my razr is currently on stock 4.0.4 ics ( tried to use safestrap but because I can only boot in bp tools it won`t work ) and I want to upgrade it to jellybean 4.2.
Can I just flash the fastboot file or is there something I should do?
Click to expand...
Click to collapse
Install a bmm and you'll be fine.
Sent from my U30GT MINI using xda app-developers app
inheme said:
Hello guys, here is the thing, my razr is currently on stock 4.0.4 ics ( tried to use safestrap but because I can only boot in bp tools it won`t work ) and I want to upgrade it to jellybean 4.2.
Can I just flash the fastboot file or is there something I should do?
Click to expand...
Click to collapse
Install Boot Menu Manager in PlayStore Here. You can boot without bp tools after installing the recovery. The fastboot files are for stock roms only. So you will have to download the rom and gapps and flash it in the recovery
I know, but I want stock jellybean for my stock rom. I`ve tried miui with bbm it was ok, but I really want jb
inheme said:
I know, but I want stock jellybean for my stock rom. I`ve tried miui with bbm it was ok, but I really want jb
Click to expand...
Click to collapse
What do you mean by stock jelly bean? The official jelly bean update has released. Or do you mean by stock android? You can install Cyanogennod 10.1 . You can find lots of roms in the development section.
Sent from my GT-N7100 using xda app-developers app
inheme said:
I know, but I want stock jellybean for my stock rom. I`ve tried miui with bbm it was ok, but I really want jb
Click to expand...
Click to collapse
install liquid smooth rom closest to stock jb and lots of tweaks if you ever do want to do things with it

rom stock destroyed with safestrap

hi everyone.
I've been searching for days to find a way to solve my big problem but with no results.
The first time i flashed carbon rom with safestrap i did it on my rom slot stock :crying: .. yeah, i know this was a big error.. of course the phone didn't boot so i flashed the rom on the slot 1. but now i want to come back to stock rom but how? i was on jelly bean en.eu and before flashing the first time i did a backup and i still have the files.. they're system.ext3.win and system.ext3.win.md5. how can i use them?? i just want to return on stock.
please help
max97ale01 said:
hi everyone.
I've been searching for days to find a way to solve my big problem but with no results.
The first time i flashed carbon rom with safestrap i did it on my rom slot stock :crying: .. yeah, i know this was a big error.. of course the phone didn't boot so i flashed the rom on the slot 1. but now i want to come back to stock rom but how? i was on jelly bean en.eu and before flashing the first time i did a backup and i still have the files.. they're system.ext3.win and system.ext3.win.md5. how can i use them?? i just want to return on stock.
please help
Click to expand...
Click to collapse
Try with RSD Lite,here are the firmwares http://forum.xda-developers.com/showthread.php?t=2231289
thanks .. do i have to uninstall safestrap before flashing with rsd?
max97ale01 said:
thanks .. do i have to uninstall safestrap before flashing with rsd?
Click to expand...
Click to collapse
No,just flash the firmware,you will get a clean rom,without root and safestrap.
Sent from my Razr XT910
which firmware do you suggest me? do i have the possibility to brick my phone?
max97ale01 said:
which firmware do you suggest me? do i have the possibility to brick my phone?
Click to expand...
Click to collapse
Any firmware for Europe should be fine
Sent from my Razr XT910
do i need adb shell?
max97ale01 said:
do i need adb shell?
Click to expand...
Click to collapse
You need to install Motorola drivers but I guess that you already did that...
If RSD Lite recognize your phone then you should be fine
Sent from my Razr XT910
Maybe this will help you
All the best
Good luck!
Good luck!
I ran into the same problem!
Would try to help, but not solve it already, good luck!

Categories

Resources