My question is. How to flash back original recovery.img
I tried to root this device and install custom recovery. seems to worked but now recovery to factory settings wont work - just reboots.
fastboot seems to work and adb connection is ok.
Phone also has SD card slot.
I have original stock .img files but factory procedure wont work - cannot install MT65xx drivers. device in device manager under windows seems to connect/disconnect every second. (procedure is to connect phone to usb with no battery inserted - appears as MT65xx device then)
Any ideas?
Maybe anyone has a good rooting procedure for this phone.
I have rooted it- have access to system files but cant change permissions or modify files. - so rooting is not done properly.
Might be that the phone is too fresh...
Related
Ok...I've searched all over and can't seem to find the answer.
Question - "How can I get my phone back to factory (out of the box) settings on a Mac Computer or Parallels?"
Current Settings - I am rooted, I have ROM Manager, Super User Permissions, Root Explorer and a Custom Rom (Fusion).
Attempts - I have downloaded ODIN, install all the necessary drivers, have booted up Parallels and have have been able to mount my phone and view files on Parallels. I have opened up ODIN and it has recognized my phone when it is ON.
Dilemma - I have gone through the steps given to us by the nice ODIN video tutorial. However, once I access download mode on my phone my Parallels gives me a pop up that says it is unable to connect the device to the USB. I have tried this over and over about 30x, still I cannot get it to recognize the phone while in download mode.
*So, can someone provide me with a solution? Either via MAC or Parallels? I'd like to get my phone back original settings soon, thanks.
Hy! i dont know if my phone is completely bricked or not, i must say in the start. ill say what it happened today with it.
I decided to root my phone,i did it by flashing an update.zip file in recovery mode. This worked good, no problems.
After, i wanted to install cyanogenmod. i prepared 3 files of which i read i need. : -ClockWorkMod_Recovery_6.0.3.0 ,CM7-A5 ( the cyanogenmod version) and gaaps.
I entered the recovery mode, and i installed cwm, and made a backup of the system. after that, for no reason i could remember, i didnt continue installing CM7-A5,but i turned on the phone. everything worked, and looked ok. but after, i decided to finish the installation. But when i tryied to enter the recovery mode, i couldnt anymore. and it doesnt start in any way. The Pc is not recognizing it when its connected via usb. (only makes the sound that something is connected, but the filesystem isn't mounted and "adb" and "fastboot" from sdk android does not recognize it).
Now, i press the power button and it freezes at the android logo. Is there any thing i could do ?
Go to recovery?
mihai666 said:
Hy! i dont know if my phone is completely bricked or not, i must say in the start. ill say what it happened today with it.
I decided to root my phone,i did it by flashing an update.zip file in recovery mode. This worked good, no problems.
After, i wanted to install cyanogenmod. i prepared 3 files of which i read i need. : -ClockWorkMod_Recovery_6.0.3.0 ,CM7-A5 ( the cyanogenmod version) and gaaps.
I entered the recovery mode, and i installed cwm, and made a backup of the system. after that, for no reason i could remember, i didnt continue installing CM7-A5,but i turned on the phone. everything worked, and looked ok. but after, i decided to finish the installation. But when i tryied to enter the recovery mode, i couldnt anymore. and it doesnt start in any way. The Pc is not recognizing it when its connected via usb. (only makes the sound that something is connected, but the filesystem isn't mounted and "adb" and "fastboot" from sdk android does not recognize it).
Now, i press the power button and it freezes at the android logo. Is there any thing i could do ?
Click to expand...
Click to collapse
I'm at the same situation, after a mistake in a TCT Bootloader: i've formatted Misc and more partitions.. and now i'm only with a android logo.
The PC recognize a "Broadcom USB wireless modem" when i connect usb and press contemporary volume-.
Recovery not start (android logo) end download mode normally procedure (volume- and power) not working.
I'd like to test to reflash recovery by Recovery Installer By Sls13 v 2.0! but the driver not run with fastboot mode.. i've tried to install ADB Sdk suite and Java Sdk.. i've the usb-driver original, but my system (win7 32bit) make identification of Smart2 as "Broadcom USB wireless modem"..
i accidentally erased boot and bootloader.nor download mode nor recovery work and my pc recognize it like Broadcom USB wireless modem.Any solution?
Dear friends,
I have this problem: I got a brand new TCL S720 and the Google Play did not work, being a known rom issue. So, before doing anything, I've managed to make a backup of it's original rom with MTK Droid tools whichI supose it did it well. Then I've tried to install a CWM recovery to try a custom rom for it. The CWM recovery seemed to install succesfully but I didn't manage to install the new rom. If I remember well, it stucked on boot logo. Then tried to revert at it's original stock recovery, managed to have the phone back as it was in initial state, but doing more tries, It remained stucked on boot logo. The problem is that my computer doesn't recognise it anymore, when I connect it to USB it tries to install MTP usb driver but even before the driver was installed well, now it refuse to install, like the driver is not good or the proper driver doesn't exist. So the only thing I can do is to boot on stock recovery but even I tried to copy the original rom as update.zip on external SD and to flash the phone using install update from sd card in recovery mode, It doesn't find the external sd card. So I'm stuck here, the computer doesn't detect the phone to try flashing it with SP flash tool or MTK Droid tool, and I also can't flash it from sd card. Have you any idea how to make it work again?
Thanks in advance.
Hey, I am new here so sorry if I'm posting in wrong board.
I rooted my P70 a while ago and everything was fine. Now I decided that I want to flash 5.1.1 on it. I proceeded to flash TWRP.
I tried it with SP flash on pc, I checked that my scatter file and recovery.img was correct. I opened the scatter file in SP, connected my phone and clicked download, but nothing happened. Only the phone started charging, I have enabled USB Debugging and developer mode. The bootloader was still the stock one. Why?
Next thing I tried is to put the recovery.img on SD card and downloading Uncletools, I flashed it and it asked me if I want to reboot in bootloader, so I did, but it was still the stock bootloader.
What am I doing wrong? Thanks a lot for any response.
Anyone got any idea?
Click download and conecting usb cable to hh
Hey,
I have the same issue. The phone is rooted but the SP flash tool will not do anything. I've read that it's because the USB drivers are incorrect. However I am unable to install the drivers as the phone does not show up under other devices but rather under portable devices. I tried to install the android sdk and use those drivers or ones I found on the web but none of them will take. I found the ADB device signed driver under USB devices in the device manager.
I am honestly at a loss here. Would be grateful if anyone has ideas I could try!
Thanks
I made the serious mistake of installing Kingroot which failed installing the first time, then it said try again, then it worked but totally took over every aspect of my phone with no apparent way to delete any of the new "features". It didn't seem to be as much about installing root as it was interested in installing some apps they force you to install which totally takes over your phone. (Side note - it is a shame that this is sold as a rooting software, it should be in reality named a virus or malware and avoided. Too bad for BLU users there doesn't seem to be any other way to attempt a root)
Then installing supersu-me created more havoc, then trying to re-install Kingroot completely locked my phone and put it in a boot loop.
Now upon first attempt, I can't seem to make SP Flash Tool or MTK Droid talk to the phone (first time trying now). I installed all the drivers that came with the forced install .exe (which installs the drivers even when no "unknown device" ever appears in device manager) but I have not yet found any "unknown device" in the Device Manager before or after installing these drivers.
When there is no data cable connected, the recovery menu must be used as the only method to power down the phone because it loops on and on with an attempted power up until the battery runs down. However after using the green on black background recovery menu (hold in VolUp and Power), and making the selection to power down, the phone finally powers down. Unfortunately, as soon as the data cable is inserted into the phone, it begins the boot loop again which makes the laptop ding-dong indicating USB driver loading/unloading over and over.
There are options on the green/black recovery menu to load from SD card and to enable ADB but I can't figure out what driver to use and which option on the green/black recovery to attempt. Of course the factory restore option did nothing and the options for ADB, Fastboot and load from SD card seem promising but all I can find for an image is a RAR file which appears as the format of someone's SP Flash Tool dump, and includes the scatter file MT6582_Android_scatter.txt plus other *.img and *.bin files.
With no way to get into my phone, I don't know how to attempt to load this image which I believe is the extraction from the SP Flash tool. I have installed CDC/ACM driver install package, Google Inc USB, Media Tek usbser from 2011 & 2007, usbvcom and Usbvcom_brom.
Any ideas? Thanks!
Just saying, whenever you root your phone you gotta make sure to have a stock firmware in case of emergencies... It's no one's fault.
hi all,
does anyone have a solution to installing a custom rom on blu studio xl (lte)? the stock rom is on Android 5.1 and its laggy as all hell.
thanks much in advance,
ak
Install mtk v com drivers.
Similar thing happened to me on a mtk phone, I have all software and drivers etc on my home pc, not here. Send me a message tomorrow to remind me and I'll Google drive them and give you a link, with instructions. It can be fixed! Don't panic! I assume you have stock firmware? If not, get that ready and downloaded ready. Also, a few different versions of SPflash tools, some don't work on some phones, even the same phones. And different USB leads also.