Yep. On Monday I dropped my S4 in the pool and it spend a good 20 seconds underwater. It was in the deepest part of my pool and I wasn't about to jump into the cold water to get it. I have insurance and all that, so I just grabbed a net and pulled it out.
I was almost certain that this phone wouldn't be working no matter what I did. Still, I pulled the battery out the second I got it out of the water and stuck it in rice for about 24 hours. The first 10 hours or so I left it in a hot room that may have had 10% humidity, and the last 14 hours I put it in a dry, cold room.
Lo and behold this morning when I put the battery in and held the power button, it powered up! Everything works - earpiece, speaker, both mic's, notification light, proximity, IR, screen, digitizer, headphone jack, capacitive buttons/lights, home button, etc. etc. Everything works!
Pretty awesome to be honest, Wanted to gloat a bit.
Had that happen to my S3. It worked pretty good for a few days and then it would get VERY hot and battery would only last about 4 hours.
I found some corrosion on the mobo from the chlorinated pool water. Perhaps you won't have that issue but if you do, PM me and I'll let you know what drastic measure I took to fix it. I rather not put it out there to all in fear someone will do it and then blame me for any issues they have lol.
It took nothing but about $7.00 and my time.
Good luck!
video or it didn't happen.
haha jk that's awesome man!
This has inspired me to start showering with my phone.
Sent from my SCH-I545 using Tapatalk
That's a awesome story there glad it still worked I do have a question did you have a case or no if so what?
FYI, If this happens to anyone else:
If an electronic device gets dunked in water one thing you can do is to disassemble it as far as you're comfortable doing and then re-dunk the device in distilled water. The distilled water will help remove residues left behind by tap water or pool water. Works best when said device is still wet from original dunk.
Then if you have some on hand, an electronics circuit cleaner can be sprayed liberally all over and in to displace the remaining water. The cleaning solvent will evaporate much faster and safer for the device.
Then I'd stick said device in a bag of rice in a heated room. And pray. Because more often then not it won't matter what you do the device will still be ruined.
Tried to recreate the pool drop......phone DID work fine, but screen cracked when it hit the ice. Gotta love Wisconsin!
Thats such crap! i get pulled into a pool by drunk friend with the S4 in my pocket. Wasnt even in the water for 10 seconds and my S4 never ever turned on again. I guess they are not all made equal lol
0reo said:
FYI, If this happens to anyone else:
If an electronic device gets dunked in water one thing you can do is to disassemble it as far as you're comfortable doing and then re-dunk the device in distilled water. The distilled water will help remove residues left behind by tap water or pool water. Works best when said device is still wet from original dunk.
Then if you have some on hand, an electronics circuit cleaner can be sprayed liberally all over and in to displace the remaining water. The cleaning solvent will evaporate much faster and safer for the device.
Then I'd stick said device in a bag of rice in a heated room. And pray. Because more often then not it won't matter what you do the device will still be ruined.
Click to expand...
Click to collapse
That sounds like it would be a good idea, using a clean water without any minerals, chemicals, etc. in it to go ahead and flush everything out. I didn't do this. I was cleaning my pool mainly because it hadn't been touched in a while and there wasn't any chlorine in the water. Usually that's bad for a pool owner, algae, but for me this time it seems to have been a blessing.
Gator Brah said:
Thats such crap! i get pulled into a pool by drunk friend with the S4 in my pocket. Wasnt even in the water for 10 seconds and my S4 never ever turned on again. I guess they are not all made equal lol
Click to expand...
Click to collapse
It also depends on how well taken care of the water is. If it had a high chlorine level it can cause corrosion much faster than usual.
swordmastr54 said:
That's a awesome story there glad it still worked I do have a question did you have a case or no if so what?
Click to expand...
Click to collapse
Yep! I had this Cruzer-Light case on my phone at the time. It's extremely tight fitting on the device, usually peels off the back-cover whenever I take it off. I'm sure it helped because it sealed the edges along the back cover.
The water-strip underneath the battery on the phone and the strip on the battery triggered, but I didn't find any water on the SDCard or the SIM. So maybe the case helped with that a little bit.
Wow, that's amazing!
Related
Specifically in the laundry. I got it out within about a minute, but it was completely submerged and April fresh. I tried the "bag of rice" routine for a few minutes, but I didn't want to wait 24 hours to see if that would work. Found "tear-down" instructional video on youtube. Took it as apart as it would let me (only about 10 screws). Motherboard, camera, power port and some other minor things but that was about it. It was soaked in there. No way rice was going to work. Stood everything on edge, propped up the hair dryer and let it blow for about 1.5 hours (rotating all the parts every few minutes). Put it back together and let my wife turn it on, while I waited in the garage. I couldn't watch. I didn't think I had insurance on it. But, it worked!! Has been perfect for 3 days.
nice bro. Glad it worked out.
Next time( and you know it'll happen again) 90% alcohol. tear it down, dunk the boards, dry in the oven at 125°. Should rewhiten the humidots too.
Sent from my Samsung SGH-I897 using XDA Premium
That's awesome! In the future, and to anyone else with a similar situation...after the phone is dunked in water somehow...immediately disassemble and SOAK in rubbing alcohol for a good minute. Blow dry the pieces for a few minutes until dry, put it back together....Presto. The alcohol absorbs the water,
You should be good to go.
Edit: i'm slow
good to know
alexcd2006 said:
Specifically in the laundry. I got it out within about a minute, but it was completely submerged and April fresh. I tried the "bag of rice" routine for a few minutes, but I didn't want to wait 24 hours to see if that would work. Found "tear-down" instructional video on youtube. Took it as apart as it would let me (only about 10 screws). Motherboard, camera, power port and some other minor things but that was about it. It was soaked in there. No way rice was going to work. Stood everything on edge, propped up the hair dryer and let it blow for about 1.5 hours (rotating all the parts every few minutes). Put it back together and let my wife turn it on, while I waited in the garage. I couldn't watch. I didn't think I had insurance on it. But, it worked!! Has been perfect for 3 days.
Click to expand...
Click to collapse
Good to know. I will remember when I will submerge mine. And I would have waited in the garage, too.
Not waterproof?
Surely you jest.
check this out....dont know if i'd try it...... lol..... http://www.youtube.com/watch?v=8puSOR2wWfQ&feature=related
i'm single. Can i borrow my buddy's wife to do it?
http://www.youtube.com/watch?v=8puSO...eature=related
Yeah this guy is a dooche
What I thought it was that is why I was getting it! Lol
mbc663 said:
The alcohol absorbs the water,
You should be good to go.
Edit: i'm slow
Click to expand...
Click to collapse
I could have sworn alcohol is used because when it dries, it doesn't leave behind minerals/residue that could short out terminals like water does, which is why it is dunked so that the alcohol replaces the water.
Alcohol dehydrates people and causes hangovers, so maybe absorption really is happening?
Alcohol breaks the surface tension of the water molecules and displaces it. Water is bad because as stated when it dries it leaves minerals and other contaminates that will grow dendrites. Microscopic fingers that will punch throught solder mask on boards and puncture insulation on wires. Deionized water is best, but most people have rubbing alcohol..
Sent from my Samsung SGH-I897 using XDA Premium
good job on saving it!
Just an FYI for others, with the blow dryer don't put it too close.
Hahhahahhahahahha @ you waiting in the garage. I would've done the saaaame thing....good sh#t.
Sent from my MB860 using XDA App
Not that I've submerged my Galaxy S2, but should something happen I'm curious as to if you submerge the screen in alcohol as well? Just a good thing to remember.
tewan said:
Not that I've submerged my Galaxy S2, but should something happen I'm curious as to if you submerge the screen in alcohol as well? Just a good thing to remember.
Click to expand...
Click to collapse
Yessir totally safe, provided you allow it to dry completely before applying voltage.
FWIW I work in a clean room, I've dropped my cappy in a lake before and brought it back to life using the aforementioned method. As stated I even got the humidots white again.
My daughter fed my laptop a sam adams once... just power the item down or remove the battery asap. Rinse/soak in alcohol. Let dry in the oven at its lowest setting. Anything under 190° is fine. Pray/sacrifice a chicken. Power up and apologize for yelling at your 2 year old...
Sent from my Samsung SGH-I897 using XDA Premium
UPDATE: I chickened out
I burned one of my two insurance replacements. The phone was still working, but the thought of the Tide and Fabric Softner working on my phones insides was too much. I wrestled with the idea of possibly wasting the $199 deductable, but I knew that if I waited for the thing to die in it's own time, I might end up with a refurb replacement.
Good thing too. It's strange, I got the replacement this morning and it's faster!! The battery has lasted all day! I still have 40% left after 12 hours, and believe me I have spent most of my free time setting everything up. Way more than I usually do with it. I don't get it. Maybe my original was a dud.
BTW, this time I sent my wife to the garage on an imaginary errand while I commited to the $199.
I have no illusions though. When our next AT&T bill is double the usual amount, that's when she'll get wise. But that gives me over a month to find a good place to hide. I can see the look on her face when I say "but this one's really fast!"
That's the dumbest thing I've heard in a long time.
Sent from my SAMSUNG-SGH-I777 using XDA Premium App
Which part?
Sent from my SAMSUNG-SGH-I777 using XDA App
Turn on everything( GPS, 4G radio and such) download a new rom and play music through the speaker
I'm hoping to overheat the phone enough to evaporate all the water haha
Well I'll see how it goes and ill report back soon
Sent from my toilet dunked PG86100 using xda premium
Stick a cut off qtip in the headphone jack (so rice doesn't get jammed in there) and throw it in a plastic sandwich bag filled up with rice, will work much better. Heat + water + electronic will just fog up the screen. Leave it in a bag of rice for a few days, battery out.
Seriously. I had water dripping from my MP3 player, and it's been working for a good year after that, because of rice.
BlaydeX15 said:
Stick a cut off qtip in the headphone jack (so rice doesn't get jammed in there) and throw it in a plastic sandwich bag filled up with rice, will work much better. Heat + water + electronic will just fog up the screen. Leave it in a bag of rice for a few days, battery out.
Seriously. I had water dripping from my MP3 player, and it's been working for a good year after that, because of rice.
Click to expand...
Click to collapse
That^
It worked for my key fob that got lost in the snow for 3 months.
BlaydeX15 said:
Stick a cut off qtip in the headphone jack (so rice doesn't get jammed in there) and throw it in a plastic sandwich bag filled up with rice, will work much better. Heat + water + electronic will just fog up the screen. Leave it in a bag of rice for a few days, battery out.
Seriously. I had water dripping from my MP3 player, and it's been working for a good year after that, because of rice.
Click to expand...
Click to collapse
I've done that before but it wasn't exciting haha I thought I'd try this for some laughs but its actually working my cameras lenses that were foggy and aren't now and I keep catching some moisture in the housing
Sent from my PG86100 using xda premium
Ahhhhhhh! No no no!
Take the battery out quick quick quick! If you have water damage the first thing you do is remove power to the device! Water isn't what damages an electronic device. In fact water itself in its purest form H2O isn't even an electrical conductor. Water conducts electricity when something is dissolved in it and the ions dissociate, allowing charge to be carried through the water. Therefore if there is a salt, or something, or in this case dust, it will be able to conduct electricity, which if two points of contact in the device are shorted it can be powerful enough to destroy it.
The rice thing can sometimes work, but if the device had a lot of water get inside it there will be water in all the nook and crannies, even inside the processor. If the physical damage is already done to one or many pieces of the electronics there may not be any fixing it.
However, there is always a possibility that the ionized water is shorting circuits and hasn't damaged anything yet. If the device is to the point where it will no longer turn on, or screen appears dead you have nothing to lose in trying to fix it. I have saved several devices in the scenario I just mentioned using a mild solvent. You need to find a tear down guide to disassemble it. When you have it taken apart you can soak each individual part in isopropyl alcohol. You need to use the purest isopropyl alcohol you can find, ideally 100% isopropyl alcohol so it doesn't contain ANY water. However if you can't find a place to get that quickly, locally, for low cost use 91% isopropyl alcohol from Walmart or any drug store. I have used that concentration to successfully cure two devices that wouldn't turn on after water damage.
Put the alcohol in a large enough container that the parts fit in, and completely submerge the parts, may even need to include the battery in the solution. Leave it there about ten minutes, occasionally swirling to get the alcohol deep inside everything, processor, etc. Then remove it from the alcohol and let it AIR dry. To be ultra safe let it air dry for twenty four hours. You can then reassemble the device and test.
Alcohol is very volatile in air, so it evaporates very quickly (specially if that air is heated). Water and alcohol are miscible, so it will remove the water from inside every part. Good luck!
Just take your phone back to sprint and get another....Im going to assume you have insurance. Why take a chance that the phone could sustain some long term damage? Get a shiny brand new one and call it a day..
SBERG117 said:
Just take your phone back to sprint and get another....Im going to assume you have insurance. Why take a chance that the phone could sustain some long term damage? Get a shiny brand new one and call it a day..
Click to expand...
Click to collapse
I would agree with that but he/she might not have $100 to drop around for a new insurance replacement phone. I have heard though of some repair centers replacing water damaged phones with a sprint ordered replacement as long as the phone works.
Sad Panda is 100% correct on the alcohol, so follow his directions! Alcohol has a high affinity for water and acts as a drying agent, drawing the water out of every corner and crevice.
oldjackbob said:
Sad Panda is 100% correct on the alcohol, so follow his directions! Alcohol has a high affinity for water and acts as a drying agent, drawing the water out of every corner and crevice.
Click to expand...
Click to collapse
+1 sad panda to save the day
Sent from my PC36100 using xda premium
The only sensible thing to do would be to do what sad panda posted. What you're doing is just retarded.
I agree. I've been doing this for years on laptops. It also works well off you spill coke or tea on it. It also helps to brush off the components with a toothbrush while soaking them in alcohol.
Sent from my PG86100 using XDA App
Bag of rice will work 99.9% of the time. Depends on how much water it got will depend on how long u need to leave it in there. If it still turns on overnight should work. Take battery off and seal it up.
Sent from my PG86100 using XDA App
Hate to say it but it actually worked... No fog on the lenses, no foggy screen, capacitive buttons all work and respond, speakers sound just like they did before, I know it might just be dumb luck but it worked out and there's no visible signs of condensation I'm the phone so I'm a happy camper
I've done all the alcohol disassembling before but I only had a T6 instead of a T5 torx and I'm a broke college student so I didn't have rice so I tried my way and it worked! so continue with the bashing if you will
(Btw I have TEP but trying something new felt like a better thing to do than waste $100 on a 1.5 hboot replacement)
Sent from my PG86100 using xda premium
thatguy11285 said:
I'm a broke college student so I didn't have rice so I tried my way and it worked!
Click to expand...
Click to collapse
Dude, a bag of rice is like four dollars.
But your idea is possibly the worst thing you could do for a phone. ONLY reason it worked is because evidently the water didn't seep in enough to cause enough damage.
Running power through a wet phone is the easiest way to kill it. Don't count on it working again for you in the future, you're lucky as hell.
Wow! So happy for you that it worked, don't try it again though! Even for a broke college student a liter of alcohol is two bucks. There are lots of nice guys on here. Even I would have sent you my torx drivers for free to help you out!
Glad everything is a ok! Good job! Phew!
This is hilarious.
Sent from my PG86100 using xda premium
If you have nothing to lose put the phone in bleach. it will bleach the water strip thing back white and leave the red lines. Let it dry then take it to sprint.
but only use this as a last resort. lol
eastside08 said:
If you have nothing to lose put the phone in bleach. it will bleach the water strip thing back white and leave the red lines. Let it dry then take it to sprint.
but only use this as a last resort. lol
Click to expand...
Click to collapse
To my knowledge this won't get the sticker back to white and still maintain the original red lines. Those stickers work just like litmus paper works, they react over the neutral range of the pH scale. Bleach should react with the red chromophores but I just don't see how it will turn from solid red to anything but solid white, or worse a solid pink.
Have you personally tried that? Also bleach is chlorine + water + uhhh, hypochlorite at equilibrium. Since that is the case, the dissociation of ions have the same property as water and salt, or water and dust as I described before, so as long as one understood you are making the water damage worse, you could do that....your electronic device would likely burn up when electricity was applied again.
Just throw it in the microwave. I'd set the microwave to "defrost" though, just to play it safe.
Sent from my PG86100 using XDA App
flonker said:
Just throw it in the microwave. I'd set the microwave to "defrost" though, just to play it safe.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
+ 1
Sent from my PG86100 using xda premium
today i experienced any phone holders worst nightmare... dropping your pride and joy in water!
but after this i quickly turned the phone off, used an hairdryer xD and put everything back in, and as if by magic, it was alive!!
although the screen did shatter :/
so is this amazing piece of technology really water proof?
No it is NOT.
You`re lucky this time, but if you ever send it in for any repair they may deny warranty because of the moisture indicators.
Most phones or any electronic devices for that matter survive a (short) drop in water due to multiple reasons:
- the case is relatively airtight. Water cannot immediately "flood" the device
- Water is a very bad electrical conductor (except if you drop it into saltwater or the unflushed toiled)
As far as conductivity is conserned, it's possible to run naked computers (no case, ...) in purified water.
However there an other issue kicks in: corrosin. Water is a very agressive substance (mainly due to oxygen) and will "eat" away electrical conductors very quickly and cause irreparable damages.
Drying off your phone may not be enough, it's recommended to:
- immediately pull the battery (that's one of the reasons I wouldn't want to get one with built-in battery)
- put it into a bag with dry rice and/or grounded herbs (whatever you have at hand) so that it's completely covered
- put it in a somewhat warm (or sunny) location so that the water vaporates and is taken up by the rice (You may want to stir once a day)
- keep fingers crossed and boot
Note that water-caused damage must not always be visible from the beginning. It's sufficient for a small component to die (e.g. a capacitor) so that in the following days/weeks/months the other parts overload too and the components start failing one after another.
Usually you're fine though.
dazlehd said:
today i experienced any phone holders worst nightmare... dropping your pride and joy in water!
but after this i quickly turned the phone off, used an hairdryer xD and put everything back in, and as if by magic, it was alive!!
although the screen did shatter :/
so is this amazing piece of technology really water proof?
Click to expand...
Click to collapse
good move on the hairdryer , just dont microwave it
Not waterproof
Defo lucky. Mine was simply rained upon whilst I was abroad and it is now not working - I didn't think of the hairdryer at the time. The company I sent it into for repairs said that the motherboard has corroded and that it needs replacing. Naturally, it will not turn on and I still want the data off of it though - any suggestions?
Lucky this time. Be careful... huh.
but some people have reported the same other forums. "Blumps, drying, works!"
No it isn't but in many cases a phone can be resurrected. Most important is to not turn it on until it is fully dry.
My friend dropped his S2 in about 50cm of salt / seawater while we were fishing. Took us a minute to find it. I used a knife to remove the screws and opened it up. Before that I rinsed it in fresh water. Let it dry for about an hour, put it back together and it worked just like before. That was 6 months ago and its still running fine.
Sent from my GT-I9300 using xda premium
So my girlfriend dropped her phone in a cup holder with water in it today. Everything works but it's getting hot, and I couldn't get to it in time to pull the battery and disassemble. It's mainly working, but gets warm and eats battery violently. Has anyone had any luck with the rubbing alcohol bath trick on one of these? I'm not sure how they may react. Some things are getting a bit more sensitive these days.
Side note... If anyone has a main-board laying around from an old busted phone or anything, let me know. She's not pleasant when she's disconnected from the facebook world. The sooner I get this done, the sooner my ear stops bleeding.
BoominSVX said:
So my girlfriend dropped her phone in a cup holder with water in it today. Everything works but it's getting hot, and I couldn't get to it in time to pull the battery and disassemble. It's mainly working, but gets warm and eats battery violently. Has anyone had any luck with the rubbing alcohol bath trick on one of these? I'm not sure how they may react. Some things are getting a bit more sensitive these days.
Side note... If anyone has a main-board laying around from an old busted phone or anything, let me know. She's not pleasant when she's disconnected from the facebook world. The sooner I get this done, the sooner my ear stops bleeding.
Click to expand...
Click to collapse
Put it in a bowl of rice with the bowl sitting on a heating pad set to high for 24-48 hours. Dont power on the phone in this time and make sure the battery is removed. Also ensure that its the phone getting hot and not the battery.
Sent from my MB855 using xda premium
Yeah when my phone went for a swim, I dove in to the pool after it. I think I ripped the battery out of it even before I was fully out of the water. I had to let it sit in rice for two days until I could no longer see water between the glass and LCD.
And even then, I opened it up and scrubbed the motherboard down with a stiff toothbrush and 91% rubbing alcohol, I wouldn't suggest dousing the phone in it, though.
Bock Abrams said:
Yeah when my phone went for a swim, I dove in to the pool after it. I think I ripped the battery out of it even before I was fully out of the water. I had to let it sit in rice for two days until I could no longer see water between the glass and LCD.
And even then, I opened it up and scrubbed the motherboard down with a stiff toothbrush and 91% rubbing alcohol, I wouldn't suggest dousing the phone in it, though.
Click to expand...
Click to collapse
I've taken phones that people could only find by calling it and seeing it light up in a puddle and saved them two days later. The trick was always get the water off and replace it with something pure so iron and zinc deposits can't complete a random circuit. Rubbing alcohol baths and a toothbrush have been common here, followed by compressed air, and finally rice for a day. It almost ALWAYS works, but this one is failing. Maybe I'll just buy a new board. To bad because the phone is still beautiful.
BoominSVX said:
I've taken phones that people could only find by calling it and seeing it light up in a puddle and saved them two days later. The trick was always get the water off and replace it with something pure so iron and zinc deposits can't complete a random circuit. Rubbing alcohol baths and a toothbrush have been common here, followed by compressed air, and finally rice for a day. It almost ALWAYS works, but this one is failing. Maybe I'll just buy a new board. To bad because the phone is still beautiful.
Click to expand...
Click to collapse
You could always buy a water sensor sticker off ebay and replace the one in your phone that is red then take it into sprint and just say its acting funky and you want it repl........ Wait, thats illegal, dont do that.....
Sent from my MB855 using xda premium
Acvice said:
You could always buy a water sensor sticker off ebay and replace the one in your phone that is red then take it into sprint and just say its acting funky and you want it repl........ Wait, thats illegal, dont do that.....
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
I had a bad experience with some half breed store breaking her old phone and trying to tell me it was water damaged. After fighting city hall and just hearing "water damage", I took it apart myself, and what do you know... NO WATER DAMAGE! The guy tried to pass it off like water broke it when HE actually did. They stood there and told me that since her (previously working) phone was now dead, the only way I was leaving the shop with a working phone was if I bought a new one. I was furious to see it not show any signs of water, and after a few more calls, I took it to a corporate store and let them take it apart. Finally, the previous notes on the account were over-ridden, and retentions sent me out a replacement for 100 dollars. Three days later, I looked at craigs and found 4 of the same phone for 100 bucks (TouchPro2) and decided insurance isn't worth it. I've never looked back, and I can still even now buy a board or a whole photon for less than the insurance charges. Just missed one on ebay for 42 bucks, but tomorrow is a new day with new auction endings.
PS, She uses sprint as a family plan. I use boost on my epic, and now at 35 bucks a month, I've never looked back from leaving sprint. They can keep their BS insurance and false hopes of 4g. They charge her an additional 10 bucks a month for a "4g device", and we've never even been able to see the icon work. A year from now, she can actually upgrade to an LTE phone when the contract runs out, but until that, ....WOW cell phone companies really suck. I don't even think I should post this.
Don't know how it happened. Was raining yesterday might not have had charger cover completely closed. I don't know...but there's visible condensation covering lense. Blow dryer does nothing.
Turn it off and open all covers then put it in a jar with rice and let it be for a couple of hours.
rockky said:
Don't know how it happened. Was raining yesterday might not have had charger cover completely closed. I don't know...but there's visible condensation covering lense. Blow dryer does nothing.
Click to expand...
Click to collapse
check the humidity paper behind the SD cover. should be white.
If its anything other than pure white then... ouch!
Like the other member suggests... Place in a air tight jar with rice and or salt. Then place in a warm cupboard
Make sure the device is off. This will absorb moisture.
You have good advices already... Some more that might help a bit more...
Make sure the rice is fresh, in the sense that it is newly opened from an air-tight package. No good will come if the rice is old.. if only old rice available, microwave it for a while to drive moisture out.
But if you can get hold of NEW silica gels packs (those sachets that come in snacks etc to keep them crispy) it would be much better.
Also, I might suggest that you actually try to encourage water evaporation by leaving the device on, and even maybe letting it run on slightly high CPU intensity workout so that it warms the device up, all in this dry airtight environment. Leaving display on and using cpu would nicely warm up the right part of the phone, which is coincidentally around the camera module. Maybe video running on loop?
with BOTH USB AND MICROSD/SIM PORTS OPEN!
Lets hope it doesn't leave a water mark like on shower glass doors...
jewelkobayashi said:
You have good advices already... Some more that might help a bit more...
Make sure the rice is fresh, in the sense that it is newly opened from an air-tight package. No good will come if the rice is old.. if only old rice available, microwave it for a while to drive moisture out.
But if you can get hold of NEW silica gels packs (those sachets that come in snacks etc to keep them crispy) it would be much better.
Also, I might suggest that you actually try to encourage water evaporation by leaving the device on, and even maybe letting it run on slightly high CPU intensity workout so that it warms the device up, all in this dry airtight environment. Leaving display on and using cpu would nicely warm up the right part of the phone, which is coincidentally around the camera module. Maybe video running on loop?
with BOTH USB AND MICROSD/SIM PORTS OPEN!
Lets hope it doesn't leave a water mark like on shower glass doors...
Click to expand...
Click to collapse
Only problem with having the device on and hot, is that evaporating the water will leave hard material behind. Like calcium and lime (what ever trace elements were in the water) This can cause issues later on.
it doesn't matter if it is evaporating fast or slow, it will still leave any solubles behind. You might be lucky in that the water that got there may have been vapour to start with