Hello Spreadtrum Masters,
My Phone ; MICROMAX BOLT A27
CHIPSET ; SPreadtrum SC6820a
Os : android 2.3.5
Sw ; ZE25PAA_060A_V8_O7
Hw ; V2.0
kernal version ; 2.6.35.7
succesfully root it by unlock root
and install Cwm recovey
all steps are working fine
also i can acces fastboot mode in phone
i did a mistake
in cwm >>> mount storage >> i formatted
/ fixnv, / backupfixnv , / runtimenv, /productinfo
aftrr fon switch on
it stucks @ boot logo ( showing bolt)
i try to flash stoke rom
by Research download.
all drivers are installed properly
after Fdl2 >> reading flash >> operation failed
again i try to Flash by Uncheck 'NV' nvitem.bin
wow... succussefully Passed
after phone switch on its stuck at bootlogo...
again i Flash stoke rom check NV But UNCHECK in CALIBRATION TAB......
SUCCESFULLY FLASHED
FONE SWITCH ON ....BOOT NORMALLY..
but long time to catch operators signal
also imei no is changed in settings>> about phone
not like sticker imei in phone batterry back
pls help meeeee
Not here with a help but here to ask you for the help!!!
hi
not here with a help but here to ask you for the help!!! :silly:
i have bricked my Samsung Galaxy Star Pro GT-S7262 when i was trying to root it but it still goes in Download Mode
i tried to flash stock rom with odin but phone wont boot up..... as my phone is Spreadtrum SC6820 thought to ask you for the help... is there any thing you can do for me
wahab96 said:
hi
not here with a help but here to ask you for the help!!! :silly:
i have bricked my Samsung Galaxy Star Pro GT-S7262 when i was trying to root it but it still goes in Download Mode
i tried to flash stock rom with odin but phone wont boot up..... as my phone is Spreadtrum SC6820 thought to ask you for the help... is there any thing you can do for me
Click to expand...
Click to collapse
bro,
do u hav stoke rom? ????
if ur stoke rom. in .pac file u can flash ur phone by research dwnload.....
if flashing fail at fd2, ,, uncheck all boxes in calibration tab.....
flash it
wahab96 said:
hi
not here with a help but here to ask you for the help!!! :silly:
i have bricked my Samsung Galaxy Star Pro GT-S7262 when i was trying to root it but it still goes in Download Mode
i tried to flash stock rom with odin but phone wont boot up..... as my phone is Spreadtrum SC6820 thought to ask you for the help... is there any thing you can do for me
Click to expand...
Click to collapse
do u succesfully install driver in ur pc? ??
also battery charge abv 80% ??
Thanks for the respones bro!
mobinmk007 said:
bro,
do u hav stoke rom? ????
if ur stoke rom. in .pac file u can flash ur phone by research dwnload.....
if flashing fail at fd2, ,, uncheck all boxes in calibration tab.....
flash it
Click to expand...
Click to collapse
i have stock rom but in .tar.md5 file!
if you can help me to convert that in .pac file please
---------- Post added at 07:54 PM ---------- Previous post was at 07:36 PM ----------
mobinmk007 said:
Hello Spreadtrum Masters,
My Phone ; MICROMAX BOLT A27
CHIPSET ; SPreadtrum SC6820a
Os : android 2.3.5
Sw ; ZE25PAA_060A_V8_O7
Hw ; V2.0
kernal version ; 2.6.35.7
succesfully root it by unlock root
and install Cwm recovey
all steps are working fine
also i can acces fastboot mode in phone
i did a mistake
in cwm >>> mount storage >> i formatted
/ fixnv, / backupfixnv , / runtimenv, /productinfo
aftrr fon switch on
it stucks @ boot logo ( showing bolt)
i try to flash stoke rom
by Research download.
all drivers are installed properly
after Fdl2 >> reading flash >> operation failed
again i try to Flash by Uncheck 'NV' nvitem.bin
wow... succussefully Passed
after phone switch on its stuck at bootlogo...
again i Flash stoke rom check NV But UNCHECK in CALIBRATION TAB......
SUCCESFULLY FLASHED
FONE SWITCH ON ....BOOT NORMALLY..
but long time to catch operators signal
also imei no is changed in settings>> about phone
not like sticker imei in phone batterry back
pls help meeeee
Click to expand...
Click to collapse
Read this post, I hope this can help you!
http://forum.xda-developers.com/showthread.php?t=2018023&page=13
wahab96 said:
hi
not here with a help but here to ask you for the help!!! :silly:
i have bricked my Samsung Galaxy Star Pro GT-S7262 when i was trying to root it but it still goes in Download Mode
i tried to flash stock rom with odin but phone wont boot up..... as my phone is Spreadtrum SC6820 thought to ask you for the help... is there any thing you can do for me
Click to expand...
Click to collapse
bro
if u hav tar.md5 file u can easily flash by odin
can u tell which method is use to root ur phone? ??
reason for brick? ??
pls tell the steps ??? cauce of brick....
bro ,,,, pls tell the stepsss which cauce brick
wahab96 said:
hi
not here with a help but here to ask you for the help!!! :silly:
i have bricked my Samsung Galaxy Star Pro GT-S7262 when i was trying to root it but it still goes in Download Mode
i tried to flash stock rom with odin but phone wont boot up..... as my phone is Spreadtrum SC6820 thought to ask you for the help... is there any thing you can do for me
Click to expand...
Click to collapse
bro
if u hav tar.md5 file u can easily flash by odin
can u tell which method is use to root ur phone? ??
reason for brick? ??
pls tell the steps ??? cauce of brick....
Some one on the XDA guided me WRONG!!!
mobinmk007 said:
bro
if u have tar.md5 file u can easily flash by odin
can u tell which method is use to root ur phone? ??
reason for brick? ??
pls tell the steps ??? cause of brick....
Click to expand...
Click to collapse
There is a thread on XDA, [Q] Rooting Samsung Galaxy Star Pro Duos (GT-S7262) http://forum.xda-developers.com/showthread.php?p=47323217#post47323217
here someone shared some kind of boot.img and said to flash it with odin or ResearchDownload! to get my device rooted! So i replaced real (STOCK) boot.img with that boot.img in tar.md5 FILE and i flashed it with odin! and it went bricked
after that tried to flash stock ROM with odin but it,s not get my device back to life it Stuck on boot and start vibrating constantly
Please read that THREAD to know in detail that how i bricked my device:angel:
the soft brick is due to erase of boot.img from phone partiton
wahab96 said:
There is a thread on XDA, [Q] Rooting Samsung Galaxy Star Pro Duos (GT-S7262) http://forum.xda-developers.com/showthread.php?p=47323217#post47323217
here someone shared some kind of boot.img and said to flash it with odin or ResearchDownload! to get my device rooted! So i replaced real (STOCK) boot.img with that boot.img in tar.md5 FILE and i flashed it with odin! and it went bricked
after that tried to flash stock ROM with odin but it,s not get my device back to life it Stuck on boot and start vibrating constantly
Please read that THREAD to know in detail that how i bricked my device:angel:
Click to expand...
Click to collapse
bro ,
did u suceesfully flash rooted boot.img by odin? ???
in my view, ,, u didnt flash completely......by odin
jus erase ur boot.img in ur phone partiton......
is ur usb cable is good? ?
disable ur driver digital signature, if ur driver is not digitally signature......
wen u connect ur phone to pc.. is ur pc detect ur fone? ? beep sound in pc? ??
check the above conditons...
den try it by odin
second steps....fastboot mod / download mode
do u hav orginal boot. img in img format, ???
otherwise extract from mtd.5
den setup fastboot adb folder
install adb drivers
copy boot.img to the folder
open cmd prmpt by shift + right click>> open command prompt here...
then put ur fone in fastbootmode & connect to pc
type command
fastboot devices
if ur phone is detected it will show ur phone s seial no
then
jus flash it by
fast boot command
fastboot flash boot boot.img
so first try fastboot mode
then only try with spreadtrum research tool
in order to flash it by resarch tool
u want 3 file
fdl1. bin
fdl2. bin
& boot.img
no need of converting to pac file
also u dont want to flash to stoke rom
try it.... gud luck
pls verify .......is ur phone is detected in ur pc
by my computer >> device mannager
i attached a pic.
den u try to flaah
Thank you So Much!!! for the help!
mobinmk007 said:
bro ,
did u suceesfully flash rooted boot.img by odin? ???
in my view, ,, u didnt flash completely......by odin
jus erase ur boot.img in ur phone partiton......
is ur usb cable is good? ?
disable ur driver digital signature, if ur driver is not digitally signature......
wen u connect ur phone to pc.. is ur pc detect ur fone? ? beep sound in pc? ??
check the above conditons...
den try it by odin
second steps....fastboot mod / download mode
do u hav orginal boot. img in img format, ???
otherwise extract from mtd.5
den setup fastboot adb folder
install adb drivers
copy boot.img to the folder
open cmd prmpt by shift + right click>> open command prompt here...
then put ur fone in fastbootmode & connect to pc
type command
fastboot devices
if ur phone is detected it will show ur phone s seial no
then
jus flash it by
fast boot command
fastboot flash boot boot.img
so first try fastboot mode
then only try with spreadtrum research tool
in order to flash it by resarch tool
u want 3 file
fdl1. bin
fdl2. bin
& boot.img
no need of converting to pac file
also u dont want to flash to stoke rom
try it.... gud luck
Click to expand...
Click to collapse
Thank you So Much!!! for the help! I believe that this will help me... :angel:
I don't have my bricked phone these days... for some reasons as soon i get my phone back i will try that & will report!
THANKS AGAIN.... Your Tip Worth a Lot to me
My micromax stuck on logo
my micromax a27 is stuck on logo BOLT .
i have bricked my micromax bolt a27,
i have flash recovery using fastboot in place of original boot image and tried to install dreambolt without rooting
now my mobile is stuck on that logo,
Now i am trying to flash stock system using fastboot but don't getting success.
please help me ......
please tell me which tool u used to flash micromax A27 . i have tried (UPGRADEDOWNLOAD_R2.9.7003) from this tool but it cannot detect my device stuck on window "waiting......."
abut phone- my phone is continuous vibrating when it attached to usb or charger.
Micromax A27 Bootloop issue
mobinmk007 said:
Hello Spreadtrum Masters,
My Phone ; MICROMAX BOLT A27
CHIPSET ; SPreadtrum SC6820a
Os : android 2.3.5
Sw ; ZE25PAA_060A_V8_O7
Hw ; V2.0
kernal version ; 2.6.35.7
succesfully root it by unlock root
and install Cwm recovey
all steps are working fine
also i can acces fastboot mode in phone
i did a mistake
in cwm >>> mount storage >> i formatted
/ fixnv, / backupfixnv , / runtimenv, /productinfo
aftrr fon switch on
it stucks @ boot logo ( showing bolt)
i try to flash stoke rom
by Research download.
all drivers are installed properly
after Fdl2 >> reading flash >> operation failed
again i try to Flash by Uncheck 'NV' nvitem.bin
wow... succussefully Passed
after phone switch on its stuck at bootlogo...
again i Flash stoke rom check NV But UNCHECK in CALIBRATION TAB......
SUCCESFULLY FLASHED
FONE SWITCH ON ....BOOT NORMALLY..
but long time to catch operators signal
also imei no is changed in settings>> about phone
not like sticker imei in phone batterry back
pls help meeeee
Click to expand...
Click to collapse
i soft brick my micromax A27 ,
it goes into bootloop
i had installed cwm and dreambolt custom tom successfully
but when i tried to get back to the original rom i delted delvick and cache and restarted it.
that my mistake cost me my phone is in bootloop it goes to the home screen then restart again.
i only have access to fastboot mode. I cant go into recovery mode tried many tricks like previous but its not working.
Was this resolved?
Im into similar situation and cant find the way around.
Please help.
Related
Hi guyz im new 2 xda
I have a serius prob actualy i have karbonn a1(clone of zte n721and also have same hardware and software of huawei pulse mini and huawei u8150) problem is that my device is stucked on boot logo and nothing is working like i tried to go into recovery mode and also in bootloader mode but no luck. also tried from pc with adb and fastboot but it also not worked (whenever i connect my phone to pc it automaticaly detected as adb interface)i also installed usb drivers correctly n still no luck
This happend when i tried to flash recovery n boot image via terminal emulater... when it giving me out of space error i rebooted my cell n this happend.... plz plz plz help me guyz
what exactly did u do ???u tried to flash cwm ?
No i mean i already succesfuly flashed cwm but still i could not go into recovery mode so i thought flashing custom recovery and boot image can solve this problem n then i tried to flash these 2 images via terminal emulater but then i got out of space error while flashing so i rebooted my cell n stucked on boot logo
did u try flashing othr custom rom ?
How can i flash other rom even i cant go into recovery mode
Hi,
I have been trying to flash CWM recovery using every possible means. I have tried MTK Uncle tool and have even tried SP Tool. both process completes and gives success report but when i restart the phone by pressing Vol UP button it enters into Factory Mode not recovery.
Reason i want to install CWM recovery is to get the phone nandroid backup and install some old ROM as the ROM which i have is 4.1.9 and has so many bugs in it. even it cant sync my google contacts and calender.
Please guide me why my phone is not getting recovery installed even after completing the whole process without any error and get OK report at the end as well but when first time it is asked to reboot into recovery it gives a blank screen and when we do that again after replacing the battery it enters into factory mode.
Details of Phone are
BB Chip : MT6575
MS Board : GT-i9300
Modem Ver: MAUI.11AMD.W11.50.SP.V20 2012/11/09 09:33
Built Time : 2013 / 02 / 18
UBoot Ver : 2010.06
Kernel Ver: 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #2 PREEMPT Tue Feb 19 09:27:09 CST 2013
Android Ver: 4.1.9
SW Ver: ALPS.ICS.MP.V2.6
Custom built Verno. : 1361175260
I say again i want to downgrade to some old version like 4.0.4 which has least number of bugs.
Thanx
rajafawadhameed said:
when i restart the phone by pressing Vol UP button it enters into Factory Mode not recovery.
Click to expand...
Click to collapse
Have you tried volumee down? Or maybe use rommanager to reboot in recovery?
pokexpert said:
Have you tried volumee down? Or maybe use rommanager to reboot in recovery?
Click to expand...
Click to collapse
Yes i have tried both. Rom Manager reboots me into a blank screen from which i have to come out by removing battery and by pressing volume down button it again gives me blank screen
This maybe happening due to the recovery not supporting your device. I have seen this issue around mainly with knock off/clone devices. As for bugs well even down grading may not fix the bugs.
That black screen is RECOVERY MODE
download recovery manager from play store and flash recovery.img
110% works on every device
Then try to reboot to recovery by same app or by rom manager.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
zelendel said:
This maybe happening due to the recovery not supporting your device. I have seen this issue around mainly with knock off/clone devices. As for bugs well even down grading may not fix the bugs.
Click to expand...
Click to collapse
Actually rest all is fine and the only bug is that i cant sync my google contact with this rom... my one friend and old model with 4.0.4 rom and it works fine thats why wanna try that
Moonguy75 said:
That black screen is RECOVERY MODE
download recovery manager from play store and flash recovery.img
110% works on every device
Then try to reboot to recovery by same app or by rom manager.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Click to expand...
Click to collapse
Tried recovery manager... on first installation it showed no recovery installed i tapped on flash CWM recovery a popup appeared displaying downloading recovery... but it remains on 0% and suddenly it vanished at 0% and a black popup appear saying recovery flashed but still not visible in recovery colomn... and even if i do reboot into recovery mode same blank screen with nothing visible and if i restart by removing batter and open recovery manager it again says no recovery installed
What about preloader.... if i flash some other preloader but offcourse compatible to my model will that make any difference ?
Download the apk below.
http://db.tt/C7rlqTu1
1.Click on recovery in app menu.
2.There click on install recovery.
wait for some time, while app search for all .img files on your sd card.
3.Then click on recovery image you want to install.
4.Let app install recovery when installing comes and then message will come
"current recovery: unrecognised"
5.Now click on reboot into recovery in app.
And you will be in recovery after some time.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Moonguy75 said:
Download the apk below.
http://db.tt/C7rlqTu1
1.Click on recovery in app menu.
2.There click on install recovery.
wait for some time, while app search for all .img files on your sd card.
3.Then click on recovery image you want to install.
4.Let app install recovery when installing comes and then message will come
"current recovery: unrecognised"
5.Now click on reboot into recovery in app.
And you will be in recovery after some time.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Click to expand...
Click to collapse
Downloaded the app that you referred. installed that but its not running every time i tap on it, error appear like unfortunately recovery manager has stopped. i checked it on both while installing it on internal storage and external both sorry that i am bothering you so much. I have been using android for last 7 years now have used HTC Hero, HTC Desire, HTC HD2, HTC EVO 3D, Samsung Galaxy S3 original.... have rooted them all recovery installed custom roms, kernels and everything i have done... but this one has really made me helpless
OK last but not the least long but 100% working method is by doing through ADT android download tool
1) place recovery.img in your pc
2)install ADT
3)install all usb drivers of ur device
4)connect USB in download mode or in bootloader or while pressing the call key(press the key when u connect phone to pc while using flashtool)
LET THE PC INSTALL ALL ADB DRIVERS ETC...
5)open ADT in arm11 browse recovery.OMG
6) in erase tick ONLY RECOVERY
7) BEGAIN
8) WAIT FOR SECONDS IT WILL BE DONE.......
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Moonguy75 said:
OK last but not the least long but 100% working method is by doing through ADT android download tool
1) place recovery.img in your pc
2)install ADT
3)install all usb drivers of ur device
4)connect USB in download mode or in bootloader or while pressing the call key(press the key when u connect phone to pc while using flashtool)
LET THE PC INSTALL ALL ADB DRIVERS ETC...
5)open ADT in arm11 browse recovery.OMG
6) in erase tick ONLY RECOVERY
7) BEGAIN
8) WAIT FOR SECONDS IT WILL BE DONE.......
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Click to expand...
Click to collapse
Presently i have two type of drivers installed on my pc
1. when i plug in the phone in normal mode it detect it as MTK65xx Android phone drivers are installed
2. When i plug it in when completely switched off for use in SP Tool mode it has drivers USB V com installed
3. When i try to get into recovery and switch it on while pressing vol up button it gets into a blank screen when i plug it in in that mode it is detected again as MTK65xx android phone but i dont have any drivers for that.
is this mode mentioned in number 3 is bootloader or download mode ? and where can i find its drivers as i googled it but coudnt find anything on that
kindly also tell me some good and stable link for ADT
Link download...
http://www.mediafire.com/?d0edy5sx9e6ote8
Try in whatever mode in which it is successful in flashing with ADT..
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Moonguy75 said:
Link download...
http://www.mediafire.com/?d0edy5sx9e6ote8
Try in whatever mode in which it is successful in flashing with ADT..
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Click to expand...
Click to collapse
Tried that as well... in all three modes but its just not working... process starts and then ends with status as fail.... i guess this cell is simply in no mood to get flashed with a new recovery thanx alot for your so much help
I have the same problem. please help I don't wanna lose hope
I Cant even find the suitable recovery img for my phone. Please if you can help it would amazing ans thanks so much
[/B][/B]
rajafawadhameed said:
Tried that as well... in all three modes but its just not working... process starts and then ends with status as fail.... i guess this cell is simply in no mood to get flashed with a new recovery thanx alot for your so much help
Click to expand...
Click to collapse
I own the same phone and have tried installing CWM on it through all possible ways! I think that newer phones with MT6575 no longer work with the Recovery img that we have been trying.
try this
i m using one...
on the black screen it seems stuck.. but press the home button u would get the recovery screen...enjoy
Hai there...
This is Rahul S Nair talking in behalf of Samsung Galaxy Grand Quattro development (qualcomm blooded device).. I m a dev working for this device for creating a cwm... I successfully found a suitable method to root it formely.. But when we reached to cwm level we found that the device is not at all taking custom recoveries .. even a moded stock recovery is not being showing up.. whenever custom recovery flashes it ll give a black screen and reboot... after a long investigation we figured that this device have a locked bootloader.. Is it possible for you to unlock this guy....
Sent from my GT-I8552 using XDA Premium 4 mobile app
Insufficient storage !!
Hey guys !! I need help quick .. I bought the same phone Samsung galaxy s3 (mt6575) the copy .. i tried every thing i rooted it but when i flash a rom from sp tools it says insufficient space on device , and ADT ends up with starting and direct to "Fail" i don't know why ? i searched the whole xda forum nobody else got this problem .. Please help me .. PM me or anything
hi
i have a huawei G610-U20 ..today i will try the phone roms backup using mtkdroidtools when processing to backup rom my pc was hanggad
then i disconnet the phone & remove battery but my phone was bootloop problem.... i have download many files form need rom and many other site using mmc method but my phone dont go the framware upgrade mode...... i have change the memory card also format the fat32 but no result
i dont know the build number my phone ..... do not go the recovery mode aloso only go fastboot mode plzzzzz xda team help me as soon as possile why the phone go to the framware upgrade mode ........ i will try flash this phone using sptool method but when i connect sptool the phone has automatically what can i do for this phone ???????
I tried to install CM11 on my xperia go .. Everything went smooth .. Rooted my phone nd install cwm recovery but wen i tried to install cm11.zip file error was shown .. I tried again nd again .. My xperia didnt start after that .. It was stuck in bootloader .. Then again i went into recovery mode nd tried flashing my stock rom backup but i installed wrong backup (moto e) then my phone got bricked .. No bootloader image .. Tried to install manual update thru fastboot but pc didnt recognise d device anymore .. Cant get into recorvery too .. Pls help me thnks in advice .. I hope i get some help for dev :'(
Sir i need a help , week ago i unlock my phone n install twrp in my redmi note 4 , then i flash all the nougat rom n enjoy it after that i have download a stable from n flash in my redmi note 4 through twrp , wiping data system,and system , now my phone is note booting , n i cant go to recovery , n usb is not detecting to flash rom , what should i do , please help all the genius
Advance thnx to eweryone
Love u all
sarifrongpi said:
Sir i need a help , week ago i unlock my phone n install twrp in my redmi note 4 , then i flash all the nougat rom n enjoy it after that i have download a stable from n flash in my redmi note 4 through twrp , wiping data system,and system , now my phone is note booting , n i cant go to recovery , n usb is not detecting to flash rom , what should i do , please help all the genius
Advance thnx to eweryone
Love u all
Click to expand...
Click to collapse
Go to fastboot (hold volume - and power), and boot to recovery using command "fastboot boot twrp.img"
Flash lazy flasher -https://www.androidfilehost.com/?fid=529152257862700328
You need it if you use official MIUI with TWRP installed, otherwise you end up with bootloop.
Sir , i end up in soft brick , n my device is not detecting , i try to connect throught fasttboot is not detecting , i used command , fastboot devices , devices donot detect ,
sarifrongpi said:
Sir , i end up in soft brick , n my device is not detecting , i try to connect throught fasttboot is not detecting , i used command , fastboot devices , devices donot detect ,
Click to expand...
Click to collapse
What did you do before this happened?
I was using aosp rom then I flash a stable rom by twrp by wipping data,cache,system , that all it stuck at bootloop
Can you enter fastboot mode? If yes then try to flash official rom via Mi Flash tool.
If fastboot is not detected by ur PC then look in device manager. If phone is detected there with yellow exclamation mark then u may have wrong drivers. Download pdanet and install it in ur pc. It has necessary drivers and ur pc should detect ur phone in fastboot mode.
Yes i can enter fastboot mood , bt i close itself after 2 or 3 minte , y it close itslf , i try to flash the rom throught miflash n i not detecting my phone , i havent get to used my phone from over a week ,