Related
Hi guyz im new 2 xda
I have a serius prob actualy i have karbonn a1(clone of zte n721and also have same hardware and software of huawei pulse mini and huawei u8150) problem is that my device is stucked on boot logo and nothing is working like i tried to go into recovery mode and also in bootloader mode but no luck. also tried from pc with adb and fastboot but it also not worked (whenever i connect my phone to pc it automaticaly detected as adb interface)i also installed usb drivers correctly n still no luck
This happend when i tried to flash recovery n boot image via terminal emulater... when it giving me out of space error i rebooted my cell n this happend.... plz plz plz help me guyz
what exactly did u do ???u tried to flash cwm ?
No i mean i already succesfuly flashed cwm but still i could not go into recovery mode so i thought flashing custom recovery and boot image can solve this problem n then i tried to flash these 2 images via terminal emulater but then i got out of space error while flashing so i rebooted my cell n stucked on boot logo
did u try flashing othr custom rom ?
How can i flash other rom even i cant go into recovery mode
Hello Spreadtrum Masters,
My Phone ; MICROMAX BOLT A27
CHIPSET ; SPreadtrum SC6820a
Os : android 2.3.5
Sw ; ZE25PAA_060A_V8_O7
Hw ; V2.0
kernal version ; 2.6.35.7
succesfully root it by unlock root
and install Cwm recovey
all steps are working fine
also i can acces fastboot mode in phone
i did a mistake
in cwm >>> mount storage >> i formatted
/ fixnv, / backupfixnv , / runtimenv, /productinfo
aftrr fon switch on
it stucks @ boot logo ( showing bolt)
i try to flash stoke rom
by Research download.
all drivers are installed properly
after Fdl2 >> reading flash >> operation failed
again i try to Flash by Uncheck 'NV' nvitem.bin
wow... succussefully Passed
after phone switch on its stuck at bootlogo...
again i Flash stoke rom check NV But UNCHECK in CALIBRATION TAB......
SUCCESFULLY FLASHED
FONE SWITCH ON ....BOOT NORMALLY..
but long time to catch operators signal
also imei no is changed in settings>> about phone
not like sticker imei in phone batterry back
pls help meeeee
Not here with a help but here to ask you for the help!!!
hi
not here with a help but here to ask you for the help!!! :silly:
i have bricked my Samsung Galaxy Star Pro GT-S7262 when i was trying to root it but it still goes in Download Mode
i tried to flash stock rom with odin but phone wont boot up..... as my phone is Spreadtrum SC6820 thought to ask you for the help... is there any thing you can do for me
wahab96 said:
hi
not here with a help but here to ask you for the help!!! :silly:
i have bricked my Samsung Galaxy Star Pro GT-S7262 when i was trying to root it but it still goes in Download Mode
i tried to flash stock rom with odin but phone wont boot up..... as my phone is Spreadtrum SC6820 thought to ask you for the help... is there any thing you can do for me
Click to expand...
Click to collapse
bro,
do u hav stoke rom? ????
if ur stoke rom. in .pac file u can flash ur phone by research dwnload.....
if flashing fail at fd2, ,, uncheck all boxes in calibration tab.....
flash it
wahab96 said:
hi
not here with a help but here to ask you for the help!!! :silly:
i have bricked my Samsung Galaxy Star Pro GT-S7262 when i was trying to root it but it still goes in Download Mode
i tried to flash stock rom with odin but phone wont boot up..... as my phone is Spreadtrum SC6820 thought to ask you for the help... is there any thing you can do for me
Click to expand...
Click to collapse
do u succesfully install driver in ur pc? ??
also battery charge abv 80% ??
Thanks for the respones bro!
mobinmk007 said:
bro,
do u hav stoke rom? ????
if ur stoke rom. in .pac file u can flash ur phone by research dwnload.....
if flashing fail at fd2, ,, uncheck all boxes in calibration tab.....
flash it
Click to expand...
Click to collapse
i have stock rom but in .tar.md5 file!
if you can help me to convert that in .pac file please
---------- Post added at 07:54 PM ---------- Previous post was at 07:36 PM ----------
mobinmk007 said:
Hello Spreadtrum Masters,
My Phone ; MICROMAX BOLT A27
CHIPSET ; SPreadtrum SC6820a
Os : android 2.3.5
Sw ; ZE25PAA_060A_V8_O7
Hw ; V2.0
kernal version ; 2.6.35.7
succesfully root it by unlock root
and install Cwm recovey
all steps are working fine
also i can acces fastboot mode in phone
i did a mistake
in cwm >>> mount storage >> i formatted
/ fixnv, / backupfixnv , / runtimenv, /productinfo
aftrr fon switch on
it stucks @ boot logo ( showing bolt)
i try to flash stoke rom
by Research download.
all drivers are installed properly
after Fdl2 >> reading flash >> operation failed
again i try to Flash by Uncheck 'NV' nvitem.bin
wow... succussefully Passed
after phone switch on its stuck at bootlogo...
again i Flash stoke rom check NV But UNCHECK in CALIBRATION TAB......
SUCCESFULLY FLASHED
FONE SWITCH ON ....BOOT NORMALLY..
but long time to catch operators signal
also imei no is changed in settings>> about phone
not like sticker imei in phone batterry back
pls help meeeee
Click to expand...
Click to collapse
Read this post, I hope this can help you!
http://forum.xda-developers.com/showthread.php?t=2018023&page=13
wahab96 said:
hi
not here with a help but here to ask you for the help!!! :silly:
i have bricked my Samsung Galaxy Star Pro GT-S7262 when i was trying to root it but it still goes in Download Mode
i tried to flash stock rom with odin but phone wont boot up..... as my phone is Spreadtrum SC6820 thought to ask you for the help... is there any thing you can do for me
Click to expand...
Click to collapse
bro
if u hav tar.md5 file u can easily flash by odin
can u tell which method is use to root ur phone? ??
reason for brick? ??
pls tell the steps ??? cauce of brick....
bro ,,,, pls tell the stepsss which cauce brick
wahab96 said:
hi
not here with a help but here to ask you for the help!!! :silly:
i have bricked my Samsung Galaxy Star Pro GT-S7262 when i was trying to root it but it still goes in Download Mode
i tried to flash stock rom with odin but phone wont boot up..... as my phone is Spreadtrum SC6820 thought to ask you for the help... is there any thing you can do for me
Click to expand...
Click to collapse
bro
if u hav tar.md5 file u can easily flash by odin
can u tell which method is use to root ur phone? ??
reason for brick? ??
pls tell the steps ??? cauce of brick....
Some one on the XDA guided me WRONG!!!
mobinmk007 said:
bro
if u have tar.md5 file u can easily flash by odin
can u tell which method is use to root ur phone? ??
reason for brick? ??
pls tell the steps ??? cause of brick....
Click to expand...
Click to collapse
There is a thread on XDA, [Q] Rooting Samsung Galaxy Star Pro Duos (GT-S7262) http://forum.xda-developers.com/showthread.php?p=47323217#post47323217
here someone shared some kind of boot.img and said to flash it with odin or ResearchDownload! to get my device rooted! So i replaced real (STOCK) boot.img with that boot.img in tar.md5 FILE and i flashed it with odin! and it went bricked
after that tried to flash stock ROM with odin but it,s not get my device back to life it Stuck on boot and start vibrating constantly
Please read that THREAD to know in detail that how i bricked my device:angel:
the soft brick is due to erase of boot.img from phone partiton
wahab96 said:
There is a thread on XDA, [Q] Rooting Samsung Galaxy Star Pro Duos (GT-S7262) http://forum.xda-developers.com/showthread.php?p=47323217#post47323217
here someone shared some kind of boot.img and said to flash it with odin or ResearchDownload! to get my device rooted! So i replaced real (STOCK) boot.img with that boot.img in tar.md5 FILE and i flashed it with odin! and it went bricked
after that tried to flash stock ROM with odin but it,s not get my device back to life it Stuck on boot and start vibrating constantly
Please read that THREAD to know in detail that how i bricked my device:angel:
Click to expand...
Click to collapse
bro ,
did u suceesfully flash rooted boot.img by odin? ???
in my view, ,, u didnt flash completely......by odin
jus erase ur boot.img in ur phone partiton......
is ur usb cable is good? ?
disable ur driver digital signature, if ur driver is not digitally signature......
wen u connect ur phone to pc.. is ur pc detect ur fone? ? beep sound in pc? ??
check the above conditons...
den try it by odin
second steps....fastboot mod / download mode
do u hav orginal boot. img in img format, ???
otherwise extract from mtd.5
den setup fastboot adb folder
install adb drivers
copy boot.img to the folder
open cmd prmpt by shift + right click>> open command prompt here...
then put ur fone in fastbootmode & connect to pc
type command
fastboot devices
if ur phone is detected it will show ur phone s seial no
then
jus flash it by
fast boot command
fastboot flash boot boot.img
so first try fastboot mode
then only try with spreadtrum research tool
in order to flash it by resarch tool
u want 3 file
fdl1. bin
fdl2. bin
& boot.img
no need of converting to pac file
also u dont want to flash to stoke rom
try it.... gud luck
pls verify .......is ur phone is detected in ur pc
by my computer >> device mannager
i attached a pic.
den u try to flaah
Thank you So Much!!! for the help!
mobinmk007 said:
bro ,
did u suceesfully flash rooted boot.img by odin? ???
in my view, ,, u didnt flash completely......by odin
jus erase ur boot.img in ur phone partiton......
is ur usb cable is good? ?
disable ur driver digital signature, if ur driver is not digitally signature......
wen u connect ur phone to pc.. is ur pc detect ur fone? ? beep sound in pc? ??
check the above conditons...
den try it by odin
second steps....fastboot mod / download mode
do u hav orginal boot. img in img format, ???
otherwise extract from mtd.5
den setup fastboot adb folder
install adb drivers
copy boot.img to the folder
open cmd prmpt by shift + right click>> open command prompt here...
then put ur fone in fastbootmode & connect to pc
type command
fastboot devices
if ur phone is detected it will show ur phone s seial no
then
jus flash it by
fast boot command
fastboot flash boot boot.img
so first try fastboot mode
then only try with spreadtrum research tool
in order to flash it by resarch tool
u want 3 file
fdl1. bin
fdl2. bin
& boot.img
no need of converting to pac file
also u dont want to flash to stoke rom
try it.... gud luck
Click to expand...
Click to collapse
Thank you So Much!!! for the help! I believe that this will help me... :angel:
I don't have my bricked phone these days... for some reasons as soon i get my phone back i will try that & will report!
THANKS AGAIN.... Your Tip Worth a Lot to me
My micromax stuck on logo
my micromax a27 is stuck on logo BOLT .
i have bricked my micromax bolt a27,
i have flash recovery using fastboot in place of original boot image and tried to install dreambolt without rooting
now my mobile is stuck on that logo,
Now i am trying to flash stock system using fastboot but don't getting success.
please help me ......
please tell me which tool u used to flash micromax A27 . i have tried (UPGRADEDOWNLOAD_R2.9.7003) from this tool but it cannot detect my device stuck on window "waiting......."
abut phone- my phone is continuous vibrating when it attached to usb or charger.
Micromax A27 Bootloop issue
mobinmk007 said:
Hello Spreadtrum Masters,
My Phone ; MICROMAX BOLT A27
CHIPSET ; SPreadtrum SC6820a
Os : android 2.3.5
Sw ; ZE25PAA_060A_V8_O7
Hw ; V2.0
kernal version ; 2.6.35.7
succesfully root it by unlock root
and install Cwm recovey
all steps are working fine
also i can acces fastboot mode in phone
i did a mistake
in cwm >>> mount storage >> i formatted
/ fixnv, / backupfixnv , / runtimenv, /productinfo
aftrr fon switch on
it stucks @ boot logo ( showing bolt)
i try to flash stoke rom
by Research download.
all drivers are installed properly
after Fdl2 >> reading flash >> operation failed
again i try to Flash by Uncheck 'NV' nvitem.bin
wow... succussefully Passed
after phone switch on its stuck at bootlogo...
again i Flash stoke rom check NV But UNCHECK in CALIBRATION TAB......
SUCCESFULLY FLASHED
FONE SWITCH ON ....BOOT NORMALLY..
but long time to catch operators signal
also imei no is changed in settings>> about phone
not like sticker imei in phone batterry back
pls help meeeee
Click to expand...
Click to collapse
i soft brick my micromax A27 ,
it goes into bootloop
i had installed cwm and dreambolt custom tom successfully
but when i tried to get back to the original rom i delted delvick and cache and restarted it.
that my mistake cost me my phone is in bootloop it goes to the home screen then restart again.
i only have access to fastboot mode. I cant go into recovery mode tried many tricks like previous but its not working.
Was this resolved?
Im into similar situation and cant find the way around.
Please help.
I tried to install a new rom(cynogenmod 11 from xda forums) in my lenovo a6000 which i god a day before on my birthday. it had lollipop os and i installed TWRP recovery in it. but the instructions for installing rom said to clear data. dalvik, cache before installing and the twrp cleared cache and delvik cache but then it had been over 5 min and it still stated -"formatting data by mounting(bla... bla...) method". so i just reboot the phone by removing the battery and booted in the recovery again. i tried to clear them again but this time all of those three stated mounting problems while clearing. i went on installing the rom but it stuck too stating only these lines:-
1>no md5 checksum found.
2>skipping md5 checksum(bla.. bla...).
so i did the same mistake again and removed the battery to reboot but now it just shows the lenovo logo on bootup and nothing happens thereafter except frequent restarts. i tried to connect it to pc to load recovery via minimal adb and fastboot but the phone is just charging itself via usb cable and not connecting to the pc no matter i reinsert the battery.
i dont want to reach the service center or my dad will kill me for damaging a new phone. please if anyone can help then reply soon or i am gonna screwed.
Just press volume - & power key same time , now your phone is in boot loader mode now connect USB & flash twrp recovery through minimal adb method & restore your backup
Sent from my Lenovo A6000 using XDA Free mobile app
To be continued
Oh I somehow figures it out, I pressed all the keys I.e. volumeup + volumedown + power key even after the Lenovo powered by android logo and it suddenly booted into recovery. This method worked in my bq s37 I didnt expected it in this case. BTW thanks for your support and can u please help in in a new case related to same. The twrp recovery for a6000 lollipop is not installing cm11 properly. Every time I install using the same method as mentioned in a post of XDA. After installation it stops on the same screen:- Lenovo (powered by android) and after that no reboot just that screen forever till the battery dies. I even tried cleaning /system before installing cm11 ROM but still no progress. Please help!
You cannot install cm11 on top of stock Lollipop rom
Revert it back to kitkat flash recovery Then install cm11
Get it of one problem and the other awaits. Now when installing KitKat rom (the official one from techotally) it said unable to mount /data. I followed some tutorial which asked to write some codes from adb shell menu. One of the codes said something like -kill recovery, after what my recovery frooze. I restarted the phone by removing the battery but nothing is happening after that. I am trying to restart it in recovery or in bootloader or even normal restart. Everything in vain and nothing is shown on screen and not even boot logo or the lenovo powered by Android screen. But in my pc some drivers started installing out of which two were installed and two weren't please help.
Ahmad Tawfik said:
Follow this guide
QUOTE]
There is said that ensure the devise is connected as Qualcomm his 9008 drivers but for me windows iinstalls 9006 drivers and States failed to verify signature. I manually installed the 9008 drivers . the installed properly without error but in not cases m getting sahara error. Failed to download. Also my phone doesn't display anything, no display, no sound and no vibrating while powering on but the PC connats it as as Qualcomm hs..............
Click to expand...
Click to collapse
*in both the cases*
Ok I will help you
1- Download stock Lollipop firmware and place it in your sd and insert it in your phone
http://phonedl.ota.lenovomm.com/dls/v6/Kraft-A6000_S054_150915_WCAA.zip
2-hold volume down and power key and you will see fastboot under powered by Android
3- use fastboot to flash and boot into stock Lollipop recovery
Fastboot flash recovery recovery.img
Fastboot boot recovery.img
http://www.mediafire.com/download/gcg2klu8fwam2sk/Recovery.img
4- in Stock recovery factory rest and wipe cache partition
5- apply update from Sd and select the stock Lollipop firmware the you placed on SDCard
6- Done your phone will boot to system successfully
If you want to install cm11 after fixing your phone
1-revert to kitkat stock firmware follow the guide (like the phone is bricked)
2- Install twrp recovery by fastboot
http://lenovo-forums.ru/index.php?app=core&module=attach§ion=attach&attach_id=36985
3- Install cm11 and enjoy
Note:
place the files you want to fastboot in the fastboot folder
Sent from my GT-I9300I using Tapatalk
You are not correctly getting it my friend. i said the phone doesnt boot at all no matter what key combinations are tried. it simply doesnt start. no display no vibration no sound nothing just the pc detects it as qualcomm hsusb.........
BTW in the mean time my father got to know about this condition. he scolded me but asked to fix it if i can before going to service center. i was just thinking what if they got to know that i rooted the phone? or installed custom recovery in it? anyway if i am to go to the service center the statement given by me will be that:- while updating via ota from kitkat to lollipop the battery died and this all happened. an yes i live in INDIA time zone=+5:30 GMT so tell me when i can find you online(time?) my friend so we can try fixing my phone also it will be help full if we become friends on facebook? so that we can chat live clearly and for as long as we want. so that i can ask you about any problem occouring in future directly without creating a forum in xda. so please buddy please....... .... .. .
The Boy Who Cried Wolf said:
You are not correctly getting it my friend. i said the phone doesnt boot at all no matter what key combinations are tried. it simply doesnt start. no display no vibration no sound nothing just the pc detects it as qualcomm hsusb.........
BTW in the mean time my father got to know about this condition. he scolded me but asked to fix it if i can before going to service center. i was just thinking what if they got to know that i rooted the phone? or installed custom recovery in it? anyway if i am to go to the service center the statement given by me will be that:- while updating via ota from kitkat to lollipop the battery died and this all happened. an yes i live in INDIA time zone=+5:30 GMT so tell me when i can find you online(time?) my friend so we can try fixing my phone also it will be help full if we become friends on facebook? so that we can chat live clearly and for as long as we want. so that i can ask you about any problem occouring in future directly without creating a forum in xda. so please buddy please....... .... .. .
Click to expand...
Click to collapse
My Facebook is [email protected]
I prefer hangout
[email protected]
Contact me any time and I will try to reply directly
Sent from my GT-I9300I using Tapatalk
After flashing the firmware link given by u , Ota will work or not ?
Sent from my Lenovo A6000 using XDA Free mobile app
amit1009000 said:
After flashing the firmware link given by u , Ota will work or not ?
Sent from my Lenovo A6000 using XDA Free mobile app
Click to expand...
Click to collapse
It will work and also this is the latest update
Sent from my GT-I9300I using Tapatalk
I know but only this update is not installing in my device 138mb , so i thinking to flash the full lolipop with this update by ur given link . can i do it ?
Sent from my Lenovo A6000 using XDA Free mobile app
amit1009000 said:
I know but only this update is not installing in my device 138mb , so i thinking to flash the full lolipop with this update by ur given link . can i do it ?
Sent from my Lenovo A6000 using XDA Free mobile app
Click to expand...
Click to collapse
Yes
Sent from my GT-I9300I using Tapatalk
Ahmad Tawfik said:
Ok I will help you
1- Download stock Lollipop firmware and place it in your sd and insert it in your phone
2-hold volume down and power key and you will see fastboot under powered by Android
3- use fastboot to flash and boot into stock Lollipop recovery
Fastboot flash recovery recovery.img
Fastboot boot recovery.img
-- in Stock recovery factory rest and wipe cache partition
5- apply update from Sd and select the stock Lollipop firmware the you placed on SDCard
6- Done your phone will boot to system successfully
If you want to install cm11 after fixing your phone
1-revert to kitkat stock firmware follow the guide (like the phone is bricked)
2- Install twrp recovery by fastboot
http://lenovo-forums.ru/index.php?app=core&module=attach§ion=attach&attach_id=36985
3- Install cm11 and enjoy
Note:
place the files you want to fastboot in the fastboot folder
Sent from my GT-I9300I using Tapatalk
Click to expand...
Click to collapse
But why don't u understand that I can not boot in any mode the danm phone simply doesn't display anything no sound or vibrations and no change of mode too.just connected as quallcomm hsusb and nothing else and even with that and following the ways in the link provided before(boycracked unbrick a6000) I'm getting sahara download error.
Not Install
Dear
Ahmed
When I am try to install the zip its give an erro
phone does not switch to carrier can not install
status (101)
installation abbroat
Please help to install it.
amit1009000 said:
Dear
Ahmed
When I am try to install the zip its give an erro
phone does not switch to carrier can not install
status (101)
installation abbroat
Please help to install it.
Click to expand...
Click to collapse
You have to install it from stock recovery and to factory reset and wipe cache partition before installing the zip
Lenovo updates are very bad and may soft brick you phone
Sent from my GT-I9300I using Tapatalk
install
i tried with stock recovery but same problem.
So it seems I'm being ignored
Hey ahmed
Kindly iam asking for xda help
I hav Archos 50c Platinum
Android ver lollipop 5.1
Builde number ( [email protected] )
It comes with chines menu in recovery mode ... i tried to install English cwm recovery img by flash tool named (flashify) ... the phon made restart to get into recovry mode and failed to install the img then it has been restarted and the phon working normaly but with two issues .... first is every time after system starts up it shows error messege (update failed this should be a temporary issue .. we'll retry later) .....the second issue is that i can't enter recovery mode any more ... even withe hard method or software tools from the android system ... whenever i try to enter recovery mode it freezs in startup logo ... then i have to reboot it and it starts successfully .
i would like any help by pc or through apk app ... but pc not available for me now ... please try to make help without pc .
And thank you in advance .
If you can get to fastboot, just grab a rom from NeedRom, flash it and away you go.
Dears,
plz help if somebody can...!
i tried to flash cwm recovery .image file with flashify without knowing of boot-loader unlocking initially, didn't backup also. and after restart its in bootloop until now.
tiried to flash the stock rom with sp flash tool and even with the box too but no success as i'm unable to start flashing because it restarts.
the thing is it doesn't go into recovery mode. from fast-mode, computer or magic box it disconnects automatically due to its bootloop/restarting.
any professionals pls help, i'll be thankful greatly....
dskpoison said:
Dears,
plz help if somebody can...!
i tried to flash cwm recovery .image file with flashify without knowing of boot-loader unlocking initially, didn't backup also. and after restart its in bootloop until now.
tiried to flash the stock rom with sp flash tool and even with the box too but no success as i'm unable to start flashing because it restarts.
the thing is it doesn't go into recovery mode. from fast-mode, computer or magic box it disconnects automatically due to its bootloop/restarting.
any professionals pls help, i'll be thankful greatly....
Click to expand...
Click to collapse
you try soft Erase Tool , link ;https://drive.google.com/file/d/0B3CCjqbTuz5RUTY2ckJKWWp5LTg/view