Related
Hi,
I'm trying to install the new official JB 4.1 with Odin.
Did everything as written in guide but the device loads with previous version and doesn't seem to load into recovery mode and install anything at all.
Tried disabling "auto reboot" in Odin, pull out battery after installing the kernel and then start the device in recovery mode (vol up + home + power) but I only get the recovery menu. when I choose "reboot device", same thing happens.
Also tried to wipe data. so now I'm stuck with no data on phone and old ICS 4.3.3 instead of JB 4.1.
Any ideas how can i solve this problem?
Their hasn't been ICS 4.3.3 anyways just flash the firmware with Odin and restore with Google....pretty simple
anyone interested in blu-ray steelbooks, holla at your boy
One possible its a faulty download or two you are doing something wrong .
You say
Did everything as written in guide but the device loads with previous version and doesn't seem to load into recovery mode and install anything at all.
That does not make sense Odin does not use recovery mode . Are you using Mobile Odin ???
after installing the kernel
Again that does not make sense its not a separate package .
device in recovery mode (vol up + home + power) but I only get the recovery menu
Likewise you are only supposed to get the recovery menu .
Install instructions here .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
sorry
I meant ICS 4.0.4, and the problem is exactly what you told me to do, I'm flashing the firmware, Odin says everything is good but when I restart the device nothing installs. Instead, the old ICS 4.0.4 loads like I never flashed anything.
speedyjay said:
Their hasn't been ICS 4.3.3 anyways just flash the firmware with Odin and restore with Google....pretty simple
anyone interested in blu-ray steelbooks, holla at your boy
Click to expand...
Click to collapse
Maybe I didn't say it right
I only got into recovery mode because I read in some guide here that if the device auto reboots but doesn't install the new firmware I should go into recovery mode and then it will install the firmware.
And no, I'm using the normal pc audin version, not mobile Odin.
JJEgan said:
One possible its a faulty download or two you are doing something wrong .
You say
Did everything as written in guide but the device loads with previous version and doesn't seem to load into recovery mode and install anything at all.
That does not make sense Odin does not use recovery mode . Are you using Mobile Odin ???
after installing the kernel
Again that does not make sense its not a separate package .
device in recovery mode (vol up + home + power) but I only get the recovery menu
Likewise you are only supposed to get the recovery menu .
Install instructions here .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
Click to expand...
Click to collapse
yossi1771 said:
I meant ICS 4.0.4, and the problem is exactly what you told me to do, I'm flashing the firmware, Odin says everything is good but when I restart the device nothing installs. Instead, the old ICS 4.0.4 loads like I never flashed anything.
Click to expand...
Click to collapse
If Odin flashes 100% and nothing updates then either the file is at fault itself or you phone is damaged .
You don't restart the device Odin does as Auto reboot should be ticked .
read in some guide here that if the device auto reboots but doesn't install the new firmware I should go into recovery mode and then it will install the firmware.
NOPE factory reset will but not recovery .
jje
oops
Sorry my bad, I was trying to flash the root file instead of the firmware file.. didn't even know it has such big size..
Thanks for the help anyway guys
Hello all. I have had Shostock3 for a while now and read that if you use the Siyah Kernel with it then it is an awesome combo. Well I downloaded the kernel and went to install it through CWM and now I have a big problem. I chose to reboot and install the kernel and when I did I am now STUCK at the screen that says "Samsung Galaxy S II GT-i9100" with the yellow triangle. I have let it just sit and see what it does but it goes no where. WHAT DO I DO?!?!?! HELP! Thanks all!
Samsung Galaxy S II i777
Running Shostock3
WAS running with default kernel that comes with Shostock3
EDIT: It doesn't seem that I can get into the recovery mode either. I am trying the volume button + power button combination and having no luck....
nbarr7655 said:
Hello all. I have had Shostock3 for a while now and read that if you use the Siyah Kernel with it then it is an awesome combo. Well I downloaded the kernel and went to install it through CWM and now I have a big problem. I chose to reboot and install the kernel and when I did I am now STUCK at the screen that says "Samsung Galaxy S II GT-i9100" with the yellow triangle. I have let it just sit and see what it does but it goes no where. WHAT DO I DO?!?!?! HELP! Thanks all!
Samsung Galaxy S II i777
Running Shostock3
WAS running with default kernel that comes with Shostock3
EDIT: It doesn't seem that I can get into the recovery mode either. I am trying the volume button + power button combination and having no luck....
Click to expand...
Click to collapse
Which siyah did you flash. The one you want is called AJK now
122ninjas said:
Which siyah did you flash. The one you want is called AJK now
Click to expand...
Click to collapse
/Siyah-I777-v7.9b-S.zip
Is the name of the file that I tried to put on. Should I try to get the one that you stated and put it on via download mode? Because it seems that I can get into download mode but that's about it. I can't get into recovery.
nbarr7655 said:
/Siyah-I777-v7.9b-S.zip
Is the name of the file that I tried to put on. Should I try to get the one that you stated and put it on via download mode? Because it seems that I can get into download mode but that's about it. I can't get into recovery.
Click to expand...
Click to collapse
Hold power button plus volume up and volume down, keep it held in until you boot into recovery. Recovery won't just disappear, normally people just aren't holding them in long enough or are using the wrong button combo. Let us know if you get back up and running. Also make sure when installing the siyah kernel you're following the OP directions to the letter.
Phalanx7621 said:
Hold power button plus volume up and volume down, keep it held in until you boot into recovery. Recovery won't just disappear, normally people just aren't holding them in long enough or are using the wrong button combo. Let us know if you get back up and running. Also make sure when installing the siyah kernel you're following the OP directions to the letter.
Click to expand...
Click to collapse
I can't get into recovery. I simply cant. I hold the buttons, correctly might I add, and then the logo appears, then goes away and I am left with nothing but a blank, black screen. The bottom buttons aren't even lit.
Possible hardware failure on your power button or one of your volume buttons I supposed. Have you tried flashing a siyah.tar file in odin to get a.different usable recovery?
Phalanx7621 said:
Possible hardware failure on your power button or one of your volume buttons I supposed. Have you tried flashing a siyah.tar file in odin to get a.different usable recovery?
Click to expand...
Click to collapse
If you could link me a Siyah kernel that is in a .tar format I would be appreciative.
Dude do as Phalanx says. Vol up+Vol down+ Power and even after the logo goes away dont release the buttons. Recovery will show up.
Sent from my SGH-I777 using xda premium
Either that or if you get adb up an running on your computer, hook up your phone via usb and type (this is for mac, may be slightly different for other os's):
adb root
adb reboot recovery
and voila! your phone boots up in recovery!
can't get past boot screen on siyah 5.0.1
I spent all the time I could thinking I had this but apparently I don't!
Have AT&T Samsung i777 running the latest stock 4.1.2 that I got from Kies.
Wanted to try my hand at custom roms.
Was able to root phone using flamaroot which gave me SU ability
Bought Mobile Odin pro, downloaded Siyah .tar file and put it on SD.
Flashed it with mobile Odin.
Because I'm an idiot, I was hoping to make a rom backup after flashing.
Now, it boots "Samsung" then the Siyah screen, then goes blank.
I can get into CWM recovery but without a backup rom to restore to I'm not sure what to do.
Also, can get into Download mode which reads:
ODIN MODE
Product Name: SGH-I777
Custom Binary Download: NO
Current Binary: Samsung Official
However, it reads downloading, but I do not believe there's anything to download and it's been like this for 20 minutes
ANY ideas on what I could or should do would be GREATLY appreciated. Thanks!
Kurt
kurtisherzog88 said:
I spent all the time I could thinking I had this but apparently I don't!
Have AT&T Samsung i777 running the latest stock 4.1.2 that I got from Kies.
Wanted to try my hand at custom roms.
Was able to root phone using flamaroot which gave me SU ability
Bought Mobile Odin pro, downloaded Siyah .tar file and put it on SD.
Flashed it with mobile Odin.
Because I'm an idiot, I was hoping to make a rom backup after flashing.
Now, it boots "Samsung" then the Siyah screen, then goes blank.
I can get into CWM recovery but without a backup rom to restore to I'm not sure what to do.
Also, can get into Download mode which reads:
ODIN MODE
Product Name: SGH-I777
Custom Binary Download: NO
Current Binary: Samsung Official
However, it reads downloading, but I do not believe there's anything to download and it's been like this for 20 minutes
ANY ideas on what I could or should do would be GREATLY appreciated. Thanks!
Kurt
Click to expand...
Click to collapse
Where did you get the Siyah 5.0.1 in tar format? It sounds like you tried to flash a kernel that is not compiled for your phone. You need a kernel that is compiled specifically for the SGH-I777.
If that is the case, then you should be able to recover by flashing a good kernel using Odin, if you can find a tar version, or just flash the 4.1.2 stock firmware with Odin, which you can get from the Download Repository or from sammobile.com/firmware or Samsung-updates.com.
But first, since you can get into recovery, try performing a wipe data/factory reset to see what happens.
creepyncrawly said:
Where did you get the Siyah 5.0.1 in tar format? It sounds like you tried to flash a kernel that is not compiled for your phone. You need a kernel that is compiled specifically for the SGH-I777.
If that is the case, then you should be able to recover by flashing a good kernel using Odin, if you can find a tar version, or just flash the 4.1.2 stock firmware with Odin, which you can get from the Download Repository or from sammobile.com/firmware or Samsung-updates.com.
But first, since you can get into recovery, try performing a wipe data/factory reset to see what happens.
Click to expand...
Click to collapse
Thank you so much for helping me! First of all, I used your post, "Odin3 One-click Downloaders for Stock and Stock + Root" and was able to follow those steps to get me back to 2.3 and then I connected back to Kies to get back to stock 4.1.2. SO, I am completely back where I started a week ago, but I have a phone that works thanks to you!!
To answer your question: because I was using Mobile Odin, it only recognized .tar files and I found one on Siyah's blog (gokhanmoral) which was categorized under "sgs2 kernel".
So I'm back to the start (actually did the unrooted one so I don't even have it rooted currently). However, with all the reading I've been doing on this forum, I can't shake the desire to use a custom rom. I know I'm very much a noob and probably should make myself happy with my phone, but I wanna give it another try. I understand with my following questions if I'm posting in the wrong area and cannot have my questions answered.
Here's where I'm stuck. I know I need to make a custom recovery (cwm or twrp I'm not totally sure) before flashing a custom kernel and then rom. But I just can't figure out how to do it. When I go into recovery (holding volume buttons and power), there is not option for "backup and restore". How can I get a backup of my current rom so I can start with the other stuff?
The order as I understand it:
1. root phone
2. install cwm or twrp in order to create a backup of current rom
3. flash a custom kernel
4. flash a custom rom (that is compatible with kernel)
Thanks so much again for all your help!!
Kurt
kurtisherzog88 said:
Thank you so much for helping me! First of all, I used your post, "Odin3 One-click Downloaders for Stock and Stock + Root" and was able to follow those steps to get me back to 2.3 and then I connected back to Kies to get back to stock 4.1.2. SO, I am completely back where I started a week ago, but I have a phone that works thanks to you!!
To answer your question: because I was using Mobile Odin, it only recognized .tar files and I found one on Siyah's blog (gokhanmoral) which was categorized under "sgs2 kernel".
So I'm back to the start (actually did the unrooted one so I don't even have it rooted currently). However, with all the reading I've been doing on this forum, I can't shake the desire to use a custom rom. I know I'm very much a noob and probably should make myself happy with my phone, but I wanna give it another try. I understand with my following questions if I'm posting in the wrong area and cannot have my questions answered.
Here's where I'm stuck. I know I need to make a custom recovery (cwm or twrp I'm not totally sure) before flashing a custom kernel and then rom. But I just can't figure out how to do it. When I go into recovery (holding volume buttons and power), there is not option for "backup and restore". How can I get a backup of my current rom so I can start with the other stuff?
The order as I understand it:
1. root phone
2. install cwm or twrp in order to create a backup of current rom
3. flash a custom kernel
4. flash a custom rom (that is compatible with kernel)
Thanks so much again for all your help!!
Kurt
Click to expand...
Click to collapse
OK, glad your're back to working. The Siyah kernel you flashed is for the GT-I9100, the international version of the Galaxy s2. As I said, you will need a kernel that is compiled specifically for the SGH-I777, so get your kernel from the I777 Android Development Forum.
Next, you can also use a straight zImage file with Mobile Odin. You don't have to have a tar. You can even download a ClockworkMod flashable zip file and use an archiving tool such a Win Zip or 7Zip to open it and extract the zImage from it. Then use that to flash through Mobile Odin.
You currently have the stock 3e Recovery, which does not have a backup facility, nor the ability to flash custom firmware (unless it is signed by Samsung.) So you need to install a custom kernel with ClockworkMod Recovery (or TWRP Recovery will also work.) By the way, those are just different developers versions of almost exactly the same recovery functions, so it doesn't really matter which you use.
For a kernel, go to this post in the development section and download the third of four which is titled "AJK v2.0.5 NO-SWAP Samsung." As I said above, extract the zImage from the zip and use that to flash in Mobile Odin.
Also on this phone, recovery and the kernel are not separate, they are one unit, so you install the kernel to get the custom recovery. Your steps 2 and 3 are incorrect. Remove step 2 entirely. Step 3 will install both the kernel and the custom recovery. In step 4, you can flash any custom firmware you want. They all come with an included kernel, so it doesn't matter what kernel you start with because after you flash you will have a different kernel anyway.
And finally, don't worry about backing up the stock firmware. If you mess up the flash, or soft brick the phone, you can just reinstall stock as you did before. After you have a custom firmware installed, and have your phone configured exactly the way you want it, then is the time to make a backup, because you can flash to a different custom firmware to try it out, and if you don't like it, you can restore your backup and be back to exactly where you were.
creepyncrawly said:
OK, glad your're back to working. The Siyah kernel you flashed is for the GT-I9100, the international version of the Galaxy s2. As I said, you will need a kernel that is compiled specifically for the SGH-I777, so get your kernel from the I777 Android Development Forum.
Next, you can also use a straight zImage file with Mobile Odin. You don't have to have a tar. You can even download a ClockworkMod flashable zip file and use an archiving tool such a Win Zip or 7Zip to open it and extract the zImage from it. Then use that to flash through Mobile Odin.
You currently have the stock 3e Recovery, which does not have a backup facility, nor the ability to flash custom firmware (unless it is signed by Samsung.) So you need to install a custom kernel with ClockworkMod Recovery (or TWRP Recovery will also work.) By the way, those are just different developers versions of almost exactly the same recovery functions, so it doesn't really matter which you use.
For a kernel, go to this post in the development section and download the third of four which is titled "AJK v2.0.5 NO-SWAP Samsung." As I said above, extract the zImage from the zip and use that to flash in Mobile Odin.
Also on this phone, recovery and the kernel are not separate, they are one unit, so you install the kernel to get the custom recovery. Your steps 2 and 3 are incorrect. Remove step 2 entirely. Step 3 will install both the kernel and the custom recovery. In step 4, you can flash any custom firmware you want. They all come with an included kernel, so it doesn't matter what kernel you start with because after you flash you will have a different kernel anyway.
And finally, don't worry about backing up the stock firmware. If you mess up the flash, or soft brick the phone, you can just reinstall stock as you did before. After you have a custom firmware installed, and have your phone configured exactly the way you want it, then is the time to make a backup, because you can flash to a different custom firmware to try it out, and if you don't like it, you can restore your backup and be back to exactly where you were.
Click to expand...
Click to collapse
Wow, excellent information and I cannot thank you enough for taking the time to help me out. My last question hopefully, and I don't mean to try your patience but what is the best way, would you recommend, to root my phone? I did it with flamaroot previously but it was temporary? Thanks!
Kurt
I have no experience with 4.1.2 and framaroot since I'm running Shostock3. No one who has used that method has said anything about it not being a permanent root. Why do you think it's not permanent?
I think it will be fine. Anyway after you root you're going to install a custom kernel followed immediately by a custom firmware which will be rooted. So even if it wasn't permanent it wouldn't matter.
Sent from my SGH-I777 using xda app-developers app
creepyncrawly said:
I have no experience with 4.1.2 and framaroot since I'm running Shostock3. No one who has used that method has said anything about it not being a permanent root. Why do you think it's not permanent?
I think it will be fine. Anyway after you root you're going to install a custom kernel followed immediately by a custom firmware which will be rooted. So even if it wasn't permanent it wouldn't matter.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I read somewhere that flamaroot was not permanent. Anyway, did exactly as you said and everything is working perfectly!! I seriously can't thank you enough for working with me. Trying SuperNexus to start but this is amazing!!
Kurt
phone completely frozen
hey guys
recently i've just got a 4.4 kitkat rom for my gt-s5300 and it worked preety well.
but i've downloaded a kernel rom(NeohmKernel_v1_s5301_OhmPsy.zip) that i didn't know that it wasn't compatible with my phone and now it stucked in boot screen. i've turned it on and wait for 2 hours if maybe it will work, but the phone still stucked in boot screen.
i've tried to fix this by pressing power+up vol but didn't work
pls help. it's my only phone i've got(but i know this phone is sh*tty)
-Mamelic
try to hard reset your phone... pressing volume up+power+home buttons together... nd let me knw if it works
Sent from my SGH-M919 using XDA Free mobile app
gaurav gaba said:
try to hard reset your phone... pressing volume up+power+home buttons together... nd let me knw if it works
Sent from my SGH-M919 using XDA Free mobile app
Click to expand...
Click to collapse
yeah i've tried but it's still stuck
it only shows the logo"GT-S5300 (SAMSUNG on bottom)" only and it's now booting
i've been stupidly downloading rom patches before(i've got android jellybean, android ICS, and android kitkat custom rom)
---------- Post added at 06:07 AM ---------- Previous post was at 05:35 AM ----------
Kotkot_Mamelic15 said:
yeah i've tried but it's still stuck
it only shows the logo"GT-S5300 (SAMSUNG on bottom)" only and it's now booting
i've been stupidly downloading rom patches before(i've got android jellybean, android ICS, and android kitkat custom rom)
Click to expand...
Click to collapse
adn yea i've forgot that i've found this thread: http://forum.xda-developers.com/showthread.php?t=1921421
fortunately i've tried to press power+down vol.+home btn and i've got this message"warning!! a custom os can cause critical problems in your phone and installed applications. if u want to download a custom os, press vol up key. otherwise, press the vol down key to cancel." and got odin3 v1.87 cuz it says that this thing will help me. but unfortunately i don't know how to use it
Kotkot_Mamelic15 said:
adn yea i've forgot that i've found this thread: http://forum.xda-developers.com/showthread.php?t=1921421
fortunately i've tried to press power+down vol.+home btn and i've got this message"warning!! a custom os can cause critical problems in your phone and installed applications. if u want to download a custom os, press vol up key. otherwise, press the vol down key to cancel." and got odin3 v1.87 cuz it says that this thing will help me. but unfortunately i don't know how to use it
Click to expand...
Click to collapse
First off, this forum is not for your phone, it is for the SGH-I777 AT&T Galaxy SII, so we don't know the specifics of your phone.
Following the above procedure will put your phone into download mode, where you can flash the firmware you linked.
Since you say you don't know how to use it, I am going to post a complete set of instructions for using Odin that I wrote some time ago. Bear in mind that this is for the I777, and you will have to adjust some things to make it work for your phone. Refer to the flashing instructions in the thread you linked.
How to use stand-alone Odin3 to flash firmware:
Follow and recheck each of the following steps. Do them in order listed, as some steps are dependent on previous steps. Instructions are for Odin3 v1.85. It should work with any version of Odin, but some details, like color of items, may be different.
1.) Open Odin on the Windows Desktop.
2.) 3.) 4.) Put your phone into download mode.
5.) In Odin, you should get the yellow box under where it says ID:COM with the text 0:[COMx], and in the Message area, <ID:0/00x> Added!! where x is some number, usually 1-8.
6.) In Odin, make sure Auto Reboot and F. Reset Time are checked and all other items are not checked.
7.) Click on the PDA button. Browse to the tar file you want to install and select it so its path appears in the text edit box next to the button.
8.) Make sure the check box next to the PDA button is checked.
9.) Click the Start button.
10.) You should see the green progress bar advancing.
11.) When complete, you will get a PASS (or FAIL if unsuccessful).
If after the successful flash your phone does not boot into the firmware, then perform a hard reset. I don't know your phone, but normally you would boot into recovery and perform a wipe data/factory reset.
I*have an android version 2.3.4 and does not search for me and yet sgsII update has already JB long. What to do to have searched this update? CSC changed even with the KOR on the XEO and still nothing ... Please help!
DarNex said:
I*have an android version 2.3.4 and does not search for me and yet sgsII update has already JB long. What to do to have searched this update? CSC changed even with the KOR on the XEO and still nothing ... Please help!
Click to expand...
Click to collapse
If you are having trouble to search for the latest updates for your s2, I suggest going on samfirmware and search for the latest update(google it, open the website, click check for firmware and select details accordingly.). You will need to make a samfirmware account but after that, you can download the file. The .zip file that you download must be flashed with ODIN.
If you don't know how to install this .zip file using odin, follow these steps:
1. Extract the download firmware making sure that you extract the .tar file from the .zip
2. Open ODIN, if you haven't downloaded it yet, google it and click the xda link.
3. Plug in you phone into your computer making sure it is in download mode (press and hold volume down, home, power)
4. Click on the PDA button and locate the .tar firmware file and select it.
5. Click start
6. Once it says successful, your phone will reboot. Quickly make your phone boot into recovery mode(volume up, home, power)
7. Once you are in the recovery menu, navigate the menu with volume buttons and select and confirm factory reset and wipe cache partition (this will delete your apps, but your files will be kept.
8. Reboot your phone then voila, your phone has the latest stock firmware!
I*can not use Odin because my computer does not search the phone.
DarNex said:
I*can not use Odin because my computer does not search the phone.
Click to expand...
Click to collapse
Even on download mode? If yes, I suggest using mobile odin and download the files, then put the on your phones internal memory. You should try custom stock roms like Neat rom since a lot of the bloat ware from samsung can be removed. I think to do both steps, your phone needs to be pre-rooted. So you will need to download an app that will root your phone. Search on xda (and search on google) for easy root methods or root app. With custom rom method (and after rooting your phone), you will need to install it using CWM or TWRP recovery (volume up, home, power)
But I do not know how to make root android 2.3.4 without a computer.
DarNex said:
But I do not know how to make root android 2.3.4 without a computer.
Click to expand...
Click to collapse
Easy, just download the root app( try framaroot) on xda using your phone and install that app, making sure unknown sources are allowed, then run it, tap the required exploit then, you're done. You can download the custom rom using your phone too. But, if you don't want to use your computer, this will take longer to do. Since your phone is now rooted, you can also use mobile odin too! For custom stock rom (4.1.2 neat rom), you will need to use rom manager, download the latest recovery for s2 then install it. After, you need to download a Jelly bean kernel onto your phone's internal storage (search for apolo kernel by Pedestre), then download the custom rom into your phones internal storage. Using the steps I've said before, go into recovery mode, then:
Press install from zip, select whichever storage location you downloaded your files in, select the JB kernel, then once it installs, your phone will reboot. You will notice your phone will not boot properly and will restart back into the recovery. Once booting back into recovery, install the neat rom zip file and then the aroma installer will pop up with all the options you can choose from.
I can not use the computer because the computer does not detect the phone. And I'd like to stock JB 4.1.2, does not want a custom rom. and how to write it stock JB by mobile odin? And if mobil odin must be PRO or lite?
DarNex said:
I can not use the computer because the computer does not detect the phone. And I'd like to stock JB 4.1.2, does not want a custom rom. and how to write it stock JB by mobile odin? And if mobil odin must be PRO or lite?
Click to expand...
Click to collapse
Then you will still need to do the rooting of your phone. When you download the stock official rom from a website like samfirmware (onto your phones internal storage), you will need to extract it with rar for android (you need to extract the .tar file). Then you basically need to open the odin mobile app, select the pda file then your phone should do install the stock rom. Sorry about saying to download mobile odin from the play store, I forgot chainfire (the dev) made it so you needed to download the .apk file from xda: http://forum.xda-developers.com/attachment.php?attachmentid=2719771&d=1398965576 The one on the play store was an optional payment to support the dev.
I'll try. Is odin mobile is safe?
DarNex said:
I'll try. Is odin mobile is safe?
Click to expand...
Click to collapse
As long as you select the right file for the right usage. (E.g PDA for phone software, etc) if you follow my steps, your phone should be all good. Just make sure you have enough battery during the process.
what about the bootloader? On another forum I asked was it said that the renovation of GB / ICS to JB need to update the bootloader.
DarNex said:
what about the bootloader? On another forum I asked was it said that the renovation of GB / ICS to JB need to update the bootloader.
Click to expand...
Click to collapse
The boot loader should already come with the stock rom package. When I flashed stock ics on my device, it automatically downgraded the bootloader for me. Note: sometimes, stock firmware packages can have more than one file included, but they have the uses stated at the end of the file name.
So this means that you do not need the bootloader I upgrade I can immediately upload the stock JB?
DarNex said:
So this means that you do not need the bootloader I upgrade I can immediately upload the stock JB?
Click to expand...
Click to collapse
Once again. The bootloader is automatically updated during the upgrade process. No additional steps required to update bootloader. So yes, you can just flash JB immediately.
And if he needs to upload cwm rom for mobile odin?
DarNex said:
And if he needs to upload cwm rom for mobile odin?
Click to expand...
Click to collapse
Sorry. I don't understand what you're saying.
Longer valid ive loaded the system works!
I want to put a new ROM on my phone but I'm having trouble booting/rebooting into CWM, not sure what I need to do to get it to work. Here are all the methods I've tried...
Using ROM Manager to install new ROM package:
Try to do ROM Installation, select packages and options I want
Press "Reboot and install" button
Phone starts to reboot
Samsung logo flashes once
CyanogenMod start screen comes up, boots into OS, not Recovery mode. Nothing was wiped, installed, or changed at all.
Using ROM Manager to reboot into recovery:
Go into ROM Manager, select "Reboot into Recovery"
Phone starts to reboot
Samsung logo flashes once
Samsung logo flashes twice
CyanogenMod start screen comes up, boots into OS, not Recovery mode.
Rebooting from Power menu on the phone:
Choose "Reboot," then "Recovery" from Power menu
Phone starts to reboot
Samsung logo flashes once
Samsung logo flashes again
CyanogenMod start screen comes up, boots into OS, not Recovery mode.
Power down, then hold Power + Vol Up + Vol Down:
Phone starts to reboot
Continue holding these 3 buttons
Samsung logo flashes once
Continue holding these 3 buttons
Samsung logo flashes twice
Let go of the buttons because it should now be booting into Recovery
Samsung logo flashes third time
CyanogenMod start screen comes up, boots into OS, not Recovery mode.
And here are my phone particulars:
Code:
[B]Recovery[/B]
ClockworkMod 6.0.1.0
[B]Kernel version[/B]
3.0.64-RB11-SHIFT-1.1
[B]CyanogenMod version[/B]
11-20140402-UNOFFICIAL-i777
Any ideas what I need to do to boot into Recovery?
I don't think Rom Manager is compatible with the SGH-I777. Do a Google search on mobile Odin and install the shift kernel again.
You can't use rom manager. There's a warning thread stickied at the top of this forum titled "[A] Rom Manager ******WARNING READ THIS BEFORE******."
The answer depends on which phone you have, SGH-I777 OR SGH-S959G (the straight talk version) for which see this thread.
State which phone you have, and we can give you additional guidance as needed.
creepyncrawly said:
You can't use rom manager. There's a warning thread stickied at the top of this forum titled "[A] Rom Manager ******WARNING READ THIS BEFORE******."
The answer depends on which phone you have, SGH-I777 OR SGH-S959G (the straight talk version) for which see this thread.
State which phone you have, and we can give you additional guidance as needed.
Click to expand...
Click to collapse
I have the SGH-i777. I thought by posting in this forum it would be implied that that's the one I'm talking about. Sorry for not being clear on that.
jankypatella said:
I have the SGH-i777. I thought by posting in this forum it would be implied that that's the one I'm talking about. Sorry for not being clear on that.
Click to expand...
Click to collapse
The SGH-S959G has exactly the same hardware as the SGH-I777. The only difference is that the partition table is slightly different. Those who have that phone also use this forum. Since you have the SmartTalk icon in your profile, I thought there was some chance that you might have that instead of the I777.
On the SGH-I777, the recovery is compiled into the kernel, and therefore is loaded into the kernel partition with the kernel. There is not a recovery in the recovery partition, and that is why rom manager will not work with this phone, and in fact has caused some rather severe problems for some folks.
Since you currently have cyanogenmod, and can not boot into recovery, you will need to use desktop Odin with download mode to load a new firmware onto your phone. So your best route will be to flash the phone back to stock using desktop Odin, root with Framaroot using the Aragorn exploit, and then use Mobile Odin Pro, or Mobile Odin Lite to flash a custom kernel containing ClockworkMod recovery. Then you can flash whichever custom firmware you want.
You can find the stock firmware in the Download Repository, which is also linked in my signature. Flash the I777UCMD8 Stock Binaries (Android 4.1.2 Jelly Bean) which is near the bottom of the page. Odin3 v1.85 is recommended for this phone, although any version of Odin should work. There is a link for it near the top of the page. Download mode is, while powered off, hold pwr and vol - while plugging the usb cable into the phone.
Then, after rooting and installing Mobile Odin, you should flash the AJK v4.9 No Swap kernel. Download the CWM flashable .zip file, open it in an archiving program such as 7zip, and extract the boot.img. You can not flash the zip file with mobile odin, so you will need to flash the boot.img, which Mobile Odin will recognize. However, since you are not flashing the support files for the kernel, if you boot into the stock jellybean system at this point, the buttons will not work. So, after flashing the kernel with Mobile Odin, you should boot directly into recovery, and flash the full AJK v4.9 zip file to get the buttons working with the stock firmware. Or you can flash the custom firmware of your choice at this point and skip the above step.
Success
creepyncrawly said:
The SGH-S959G has exactly the same hardware as the SGH-I777. The only difference is that the partition table is slightly different. Those who have that phone also use this forum. Since you have the SmartTalk icon in your profile, I thought there was some chance that you might have that instead of the I777.
On the SGH-I777, the recovery is compiled into the kernel, and therefore is loaded into the kernel partition with the kernel. There is not a recovery in the recovery partition, and that is why rom manager will not work with this phone, and in fact has caused some rather severe problems for some folks.
Since you currently have cyanogenmod, and can not boot into recovery, you will need to use desktop Odin with download mode to load a new firmware onto your phone. So your best route will be to flash the phone back to stock using desktop Odin, root with Framaroot using the Aragorn exploit, and then use Mobile Odin Pro, or Mobile Odin Lite to flash a custom kernel containing ClockworkMod recovery. Then you can flash whichever custom firmware you want.
You can find the stock firmware in the Download Repository, which is also linked in my signature. Flash the I777UCMD8 Stock Binaries (Android 4.1.2 Jelly Bean) which is near the bottom of the page. Odin3 v1.85 is recommended for this phone, although any version of Odin should work. There is a link for it near the top of the page. Download mode is, while powered off, hold pwr and vol - while plugging the usb cable into the phone.
Then, after rooting and installing Mobile Odin, you should flash the AJK v4.9 No Swap kernel. Download the CWM flashable .zip file, open it in an archiving program such as 7zip, and extract the boot.img. You can not flash the zip file with mobile odin, so you will need to flash the boot.img, which Mobile Odin will recognize. However, since you are not flashing the support files for the kernel, if you boot into the stock jellybean system at this point, the buttons will not work. So, after flashing the kernel with Mobile Odin, you should boot directly into recovery, and flash the full AJK v4.9 zip file to get the buttons working with the stock firmware. Or you can flash the custom firmware of your choice at this point and skip the above step.
Click to expand...
Click to collapse
Ah, gotcha - thanks for clearing that up.
Thanks for these very clear instructions - I used them to successfully flash the UCMD8 binary from the Download Repository, and I'll be leaving that on for now as I'm not using this phone too much anymore. The only thing I also had to do was, after flashing the binary, boot into the stock recovery and do a factory reset + wipe cache from there, then restart. It worked flawlessly after that.
Thanks so much for your help, creepy!
Behind the battery it says SGH-I777 Front is 4 button AT&T Samsung Galaxy S2 that has Been rooted before
My brother was playing around and playing with different roms and it has sat in a drawer and left alone - I want to get it working again to use for traveling when I go to Brazil for work.
When it boots up the SPLASH screen says GT-I9100 - I KNOW THIS IS WRONG before you make 100 comments - the It is a SGH-I777 phone - I get it. Save those comments and I dont know how this rom is on here or how it works.
I can go into Android system recovery <3e> if I hold power and volume up
and download mode if I hold power and volume down
in download mode it says Product name: GT-I9100
Custom Binary dopanload: yes (2 counts)
Current Binary: Samsung Official
Can someone tell me how to blow all of this away and to get it to a point where I can install a working semi updated rom?
Thanks. I have tried several threads and no luck.
Someone along the way installed an I9100 rom on it, and the install package they used included the I9100 secondary bootloader. The text that you read in download mode comes from the secondary bootloader, and that is why it says GT-I9100. Since you have 3e recovery, it now has the stock kernel, and maybe have been flashed back to stock, but without replacing the secondary bootloader. That is my best guess.
I would suggest that you flash the latest available full stock firmware including the secondary bootloader. That would be Jelly Bean, UCMD8, which you can get from the Download Repository. See the link in my signature. Once you flash that, you may still have the I9100 splash screen, but download mode should indicate I777 again.
After that, you can run stock JB, either with the stock kernel, or with the AJK v4.9 No Swap Kernel which will run stock JB just fine. Or you can install the custom firmware of your choice.
Either way, you should probably root using Framaroot with the Aragorn exploit, and then use Mobile Odin Pro or Mobile Odin Lite to install the boot.img extracted from the AJK zip file. Once the install is complete, boot into recovery and flash the AJK zip file because otherwise the buttons will not work. Then after that, you can either stay with AJK plus stock, or install a custom firmware.
Hope this helps, and if you have any questions, I usually check in here at least once every day or two.
creepyncrawly said:
Someone along the way installed an I9100 rom on it, and the install package they used included the I9100 secondary bootloader. The text that you read in download mode comes from the secondary bootloader, and that is why it says GT-I9100. Since you have 3e recovery, it now has the stock kernel, and maybe have been flashed back to stock, but without replacing the secondary bootloader. That is my best guess.
I would suggest that you flash the latest available full stock firmware including the secondary bootloader. That would be Jelly Bean, UCMD8, which you can get from the Download Repository. See the link in my signature. Once you flash that, you may still have the I9100 splash screen, but download mode should indicate I777 again.
After that, you can run stock JB, either with the stock kernel, or with the AJK v4.9 No Swap Kernel which will run stock JB just fine. Or you can install the custom firmware of your choice.
Either way, you should probably root using Framaroot with the Aragorn exploit, and then use Mobile Odin Pro or Mobile Odin Lite to install the boot.img extracted from the AJK zip file. Once the install is complete, boot into recovery and flash the AJK zip file because otherwise the buttons will not work. Then after that, you can either stay with AJK plus stock, or install a custom firmware.
Hope this helps, and if you have any questions, I usually check in here at least once every day or two.
Click to expand...
Click to collapse
Thanks. Ok - I downloaded I777UCMD8 Stock Binaries (Android 4.1.2 Jelly Bean) from the download repository and installed it. Splash screen says samsung and then goes to ATT globe and then starts. Error right away says gmail something not working - Wifi doesn't work - about device Model Samsung - SGH-I777 Android 4.1.2 Broadband I777UCMD8 Build JZ054K.I777UCMD8 Kernal 3.0.31-1154545-user
To go into download mode I had to hold volume up and down and plug usb cable and it now was
product name SGH-I777
custom binary yes (3 counts)
current Samsung official
Power with volume up and down without SUB to get the android system recovery that shows <3e>
Do I need to install CWM or TWRP to install AJK v4.9 or do it via android system recovery?
kingrat said:
Thanks. Ok - I downloaded I777UCMD8 Stock Binaries (Android 4.1.2 Jelly Bean) from the download repository and installed it. Splash screen says samsung and then goes to ATT globe and then starts. Error right away says gmail something not working - Wifi doesn't work - about device Model Samsung - SGH-I777 Android 4.1.2 Broadband I777UCMD8 Build JZ054K.I777UCMD8 Kernal 3.0.31-1154545-user
To go into download mode I had to hold volume up and down and plug usb cable and it now was
product name SGH-I777
custom binary yes (3 counts)
current Samsung official
Power with volume up and down without SUB to get the android system recovery that shows <3e>
Do I need to install CWM or TWRP to install AJK v4.9 or do it via android system recovery?
Click to expand...
Click to collapse
You need to use Mobile Odin or Flashify in order to install the custom kernel/recovery. You will not be able to flash the AJK kernel in stock recovery, so go to the Play Store and get one of those apps (both have a free version). You must be rooted first, so make sure you followed creepy's steps above.
Once you install AJK you'll have not only the kernel but also a custom recovery (CWM).
SteveMurphy said:
You need to use Mobile Odin or Flashify in order to install the custom kernel/recovery. You will not be able to flash the AJK kernel in stock recovery, so go to the Play Store and get one of those apps (both have a free version). You must be rooted first, so make sure you followed creepy's steps above.
Once you install AJK you'll have not only the kernel but also a custom recovery (CWM).
Click to expand...
Click to collapse
Well I have superuser now - worked with no problems..
I installed Flashify it asked for superuser I said yes but when I select boot image it just hangs - I never get the option to select the image. I have uninstalled and reinstalled.
I have installed mobile odin but it needs internet access to add some odd-on APk and I dont have internet on this phone - BECAUSE WIFI wont work. I tried to download mobile odin add-on for flash but still doesnt give me that option. I looked and couldnt located the correct add-on for this phone to install firmware
mobile odin lilte is v4.20
Flashify is 1.9.2
Not sure what option I have
kingrat said:
Well I have superuser now - worked with no problems..
I installed Flashify it asked for superuser I said yes but when I select boot image it just hangs - I never get the option to select the image. I have uninstalled and reinstalled.
I have installed mobile odin but it needs internet access to add some odd-on APk and I dont have internet on this phone - BECAUSE WIFI wont work. I tried to download mobile odin add-on for flash but still doesnt give me that option. I looked and couldnt located the correct add-on for this phone to install firmware
mobile odin lilte is v4.20
Flashify is 1.9.2
Not sure what option I have
Click to expand...
Click to collapse
Did you root using Framaroot as creepyncrawly suggested? Just installing SuperSU won't root your phone, so that's likely why you're having issues obtaining root. You must root first, then install SuperSU. Then you should then be able to use those apps that call upon root privileges.
SteveMurphy said:
Did you root using Framaroot as creepyncrawly suggested? Just installing SuperSU won't root your phone, so that's likely why you're having issues obtaining root. You must root first, then install SuperSU. Then you should then be able to use those apps that call upon root privileges.
Click to expand...
Click to collapse
yes, I install framaroot version 14.1 exploit results Success but I installed superuser and not supserSU - I have installed superSU now
I reinstalled mobile odin lite and mobile odin flashkernal and still no luck - still says that I need additional add-ons for this phone..
Installed Flashify and I granted root access via supser SU
In the flash menu zip file I get to choose and for recovery image I get a choice but if I select boot image it locks up and does nothing then says flashify isn't responding do you want to close it..
I just want a clean rom without all the bloat and working WIFI
So I installed the kernal via CWM following the instructions listed in for AJK v4.9
Kernal now says 3.10.0-R93.AJK_v4.9_NoSwap-root
So wifi still doesnt work - Buttons work now
How do I fix Wifi?
Was wifi working before you started this process, and you were able to use it? Because, after you flashed the UCMD8 stock, wifi should have been working, and you said it was not. That makes me think that you may have a hardware issue with the wifi.
creepyncrawly said:
Was wifi working before you started this process, and you were able to use it? Because, after you flashed the UCMD8 stock, wifi should have been working, and you said it was not. That makes me think that you may have a hardware issue with the wifi.
Click to expand...
Click to collapse
On an old ROM the wifi was working - I used this for phone for almost two years until I went to my Note 2 then to a Note 3 and it sat in a drawer. It had SHOstock on it before but my brother was mucking around with it to install Cyanogen and after I started this process.
I'm still not clear when the wifi was working. Was it before it sat in a drawer, or recently when your brother tried to install Cyanogen?
In my experience, wifi has always worked after a fresh install of any official stock firmware, and definitely after a fresh install of UCMD8, unless there was a hardware issue. So if wifi is not working, I would try another fresh install of UCMD8, and if wifi is not working there, I would try a fresh install of another stock firmware, perhaps UCLE5 or UCLL6 (4.0.x), or even the original UCKH7 (2.3.4), all of which are available in the Download Repository. This should give you a definitive answer whether it is hardware or firmware.
creepyncrawly said:
I'm still not clear when the wifi was working. Was it before it sat in a drawer, or recently when your brother tried to install Cyanogen?
In my experience, wifi has always worked after a fresh install of any official stock firmware, and definitely after a fresh install of UCMD8, unless there was a hardware issue. So if wifi is not working, I would try another fresh install of UCMD8, and if wifi is not working there, I would try a fresh install of another stock firmware, perhaps UCLE5 or UCLL6 (4.0.x), or even the original UCKH7 (2.3.4), all of which are available in the Download Repository. This should give you a definitive answer whether it is hardware or firmware.
Click to expand...
Click to collapse
It is strange to me as well - I will try that and let you know.