my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
skycasaway said:
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
Click to expand...
Click to collapse
Seems like a sudden death issue.take it to the service center.they'll replace the board.
Sent from my GT-I9300 using xda premium
Its either SDS or user bricked .
Service centre is your only option left .
jje
yes it's SDS
JJEgan said:
Its either SDS or user bricked .
Service centre is your only option left .
jje
Click to expand...
Click to collapse
Thank's mate, i think it's SDS! Do you know any fix to this problem!? please help me:crying::crying:
skycasaway said:
Thank's mate, i think it's SDS! Do you know any fix to this problem!? please help me:crying::crying:
Click to expand...
Click to collapse
as said before: service centre
skycasaway said:
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
Click to expand...
Click to collapse
The thing is you flashed a version not meant for your GT I9300. You flashed the Verizon bootchain. Verizon GSIII is Samsung SCH-i535.
Different hardware than a i9300 (Qualcomm Snapdragon MSM8260A Dual core CPU, and the i9300 has a Samsung Exynos 4412 Quadcore). Sorry bro. If you still have download mode, you can try flash a i9300 bootloader. If not. you're dead.
dear people
:highfive::highfive:
pleas help me out hot to fix my samsung galalxy s3 , Swiss AUT version. my phone couldn't start or either be in recovery mode,,, i only can enter restore mode.. but using of odin ends up with fail,, there's no PIT for mapping,,, my phone is 16 gb. can you help me how to unbrick or fix this problem of Pit in order to flash normally in Odin? also i realized that when my phone in restore mode in the upper of sreen the custom No. is empty which is little bit weird because before it was Gt-i9300. now it is empty???
pleas help :fingers-crossed:
I am looking forward to hearing from you
kind regards
hi good day my samsung s3 i9300 battery died on me and wouldn't power on because its stuck on the samsung s3 screen i've done all the hints an tricks i saw could someone who has the same issue as i and got through please help me i firstly factory restore it and it was still stock then when booted into the menu power up botton this it had an error with some csc then that had changed to imei problem after other attempts my problem right now is that i got the device on with 4.0.4 ics but a box comes up sometimes stating phone in factory or safety mode or sometthing like tthat and i have not backed up my imei and i have ariza but it would load onto the device but it wouldn't work because it automatically boots into factory/ safety mode how can i fix this also too if i try any other software like like jellybeans versions i get pass the s3 screen and sticks on the samsung with a boot loop please help me i really need my phone
Your post is to difficult to understand .
Start at the beginning flash stock JB rom via odin .
Then report back .
jje
A week ago a friend gave me his sgs2 cause it was broken. He did a software update and after that it freeze on the samsung logo. So i tryed to reflash it and it always stoped at zimage or nand write start. After that i tryed to flash it with a pit file but i got the wrong one and it wont start anymore nor go in DW mode :silly: . Before i started trying things out , the s2 would only boot in to the DW mode. My question is , if i replace the mainboard will it work again or it wont do anything ?
pls help me and ty
A motherboard replacement is the only fix in this instance, so the answer to your question is yes.
"With friends like you.....who needs enemies".
Hi,
first sorry for my bad english!
My S6 Edge have a issue.
I tried to go back to Firmware 5.0.1 (I know very bad idea) and then my phone bricked.
So I tried go back to Original Firmware 5.1.1.
I flashed the FIrmware with Odin but It has everytime Error message : Hidden.img failed.
So i renamed the hidden.img and then It worked and the flash was completly.
But then its stucks everytime on samsung logo. (I also tried with samsung switch and kies to flash it but the same thing happend)
So then I install/flashed the Kernel: Unibase and then the phone worked.
But now is my problem that the phone everytime reboot it selfs.
Example: When i chat via whatsapp = Its boot from himself
or when I look videos. Even when I dont use the phone. Everytime the same issue. It makes everytime a new start.
Pls help me!
supernab12 said:
Hi,
first sorry for my bad english!
My S6 Edge have a issue.
I tried to go back to Firmware 5.0.1 (I know very bad idea) and then my phone bricked.
So I tried go back to Original Firmware 5.1.1.
I flashed the FIrmware with Odin but It has everytime Error message : Hidden.img failed.
So i renamed the hidden.img and then It worked and the flash was completly.
But then its stucks everytime on samsung logo. (I also tried with samsung switch and kies to flash it but the same thing happend)
So then I install/flashed the Kernel: Unibase and then the phone worked.
But now is my problem that the phone everytime reboot it selfs.
Example: When i chat via whatsapp = Its boot from himself
or when I look videos. Even when I dont use the phone. Everytime the same issue. It makes everytime a new start.
Pls help me!
Click to expand...
Click to collapse
Now that u got it to boot have u tryed odin back to stock or smart switch or dis u try those after booting?
Yes i did both but same issue. Everytime it sucks on: Samsung s6 Edge logo
Even everytime After I Flash via odin the : unibase Kernel it works and the phone boots and all works. Only The problem is that The phone power off himself every 10-20 Minutes and reboots everytime...
No one can help? :/