Hi guys,
I had Speed Rom 8.0 installed and wanted to bring it back to OTA Wind ICS Ruu. I downloaded:
•RUU_Ruby_Globalive_WWE_1.46.1500.3_Radio_1.10.550L .01v2DC_30.69.550L.10_release_229312_signed.exe
I read that I had to lock the bootloader to run the RUU exe but it failed giving me error [140] Incorrect bootloader!
Afterwards I tried other RUU (tmobile, telus) and nothing has worked so far. However I must have messed up along the way and now I am in a boot loop!
I can still get into fastboot/bootloader. Currently I have the bootloader unlocked again. I'm S-ON
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.93.0002
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.14.1500.6
(bootloader) serialno: SH1BSVP01943
(bootloader) product: ruby
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PH8511000
(bootloader) cidnum: GLOBA001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3923mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6298f8f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Zhars7 said:
Hi guys,
I had Speed Rom 8.0 installed and wanted to bring it back to OTA Wind ICS Ruu. I downloaded:
•RUU_Ruby_Globalive_WWE_1.46.1500.3_Radio_1.10.550L .01v2DC_30.69.550L.10_release_229312_signed.exe
I read that I had to lock the bootloader to run the RUU exe but it failed giving me error [140] Incorrect bootloader!
Afterwards I tried other RUU (tmobile, telus) and nothing has worked so far. However I must have messed up along the way and now I am in a boot loop!
I can still get into fastboot/bootloader. Currently I have the bootloader unlocked again. I'm S-ON
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.93.0002
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.14.1500.6
(bootloader) serialno: SH1BSVP01943
(bootloader) product: ruby
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PH8511000
(bootloader) cidnum: GLOBA001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3923mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6298f8f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Update:
Downloaded •OTA_RUBY_ICS_35_S_Globalive_WWE_2.14.1500.6-1.46.1500.3_release_263096ebhdlebyr7k06p6u.zip
Went into fastboot and tried "Fastboot Update" command
Got the following:
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
Alright I managed to install SpeedRom 8.0 again. So at least I can boot into the OS.
However the question still remains, how do I go back to Wind Mobile ICS RUU?
Bootloader: Unlocked
S-ON
Zhars7 said:
Alright I managed to install SpeedRom 8.0 again. So at least I can boot into the OS.
However the question still remains, how do I go back to Wind Mobile ICS RUU?
Bootloader: Unlocked
S-ON
Click to expand...
Click to collapse
You need to lock your boot loader, a ruu won't flash without it locked.
Sent from my SGH-T999 using Tapatalk
SuperAfnan said:
You need to lock your boot loader, a ruu won't flash without it locked.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Locking it is no problem, however after the phones goes into a boot loop and I can only access fastboot/bootloader.
My problem is that I'm not sure which Wind Mobile RUU I need to use. Everyone I tried gives me the "wrong bootloader" version error.
Issue is that SpeedRom 8.0 is Tmobile Based and not Wind based.
Do I have execute "Mainver Error Fix" prior to running flashing the RUU?
Zhars7 said:
Locking it is no problem, however after the phones goes into a boot loop and I can only access fastboot/bootloader.
My problem is that I'm not sure which Wind Mobile RUU I need to use. Everyone I tried gives me the "wrong bootloader" version error.
Issue is that SpeedRom 8.0 is Tmobile Based and not Wind based.
Do I have execute "Mainver Error Fix" prior to running flashing the RUU?
Click to expand...
Click to collapse
You have the same issue as I did; installing a T-mobile ROM will generally screw up the bootloader and other system level software. By doing that when you try to go to stock it will complain about not being able to update.
The solution is to get S-off and then force updates. Once you have S-off then the RUU exe will force the install and everything will be OK.
http://forum.xda-developers.com/showthread.php?t=2521403
Related
Hello, I’m having trouble fixing my girls phone and could use some help I’m posting here as a last resort. Here’s the situation.
Phone is HTC EVO 3D S-ON and has never been S-OFF or Rooted. But the phone has stopped booting and I can only get into Hboot and fastboot I have tried flashing the OTA RUU buy placing the PG86IMG.zip on the root of the sdcard and also pushing the file buy fast boot and I keep getting a sig check error “FAILED (remote: signature verify fail)”
The RUU is the same version that I am running now here’s the file name but its not the only one I tried.
PG86IMG_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101-signed.zip
Output from fastboot
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.58.0000
(bootloader) version-baseband: 1.09.00.0706
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.89.651.2
(bootloader) serialno: HT17DHX15682
(bootloader) imei: 355195000000010
(bootloader) product: shooter
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG8610000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-3f645641
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Can anyone help me here im stuck???
Are you htcdev unlocked? If so, you need to run "fastboot OEM lock" from the cmd
Sent from my PG86100 using xda app-developers app
Jordan Cason said:
Hello, I’m having trouble fixing my girls phone and could use some help I’m posting here as a last resort. Here’s the situation.
Phone is HTC EVO 3D S-ON and has never been S-OFF or Rooted. But the phone has stopped booting and I can only get into Hboot and fastboot I have tried flashing the OTA RUU buy placing the PG86IMG.zip on the root of the sdcard and also pushing the file buy fast boot and I keep getting a sig check error “FAILED (remote: signature verify fail)”
Click to expand...
Click to collapse
If the phone is completely stock (locked bootloader and S-ON) you can only run the RUU from Windows, since any PG86IMG.zip file flashed from the bootloader in that configuration has to be signed by HTC. You can download the 2.89.651.2 RUU.exe from one of the links in this post and give that a try, but it sounds like there might be something else wrong with the phone.
ramjet73
Hello,
I am going to sell my T-Mobile HTC One, but I would like to return my device back to stock using the RUU method.
Here is what pops up when I issue the command fastboot getvar all:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: [B]1.57.0000[/B]
(bootloader) version-baseband: [B]4T.27.3218.14[/B]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: [B]5.14.531.1[/B]
(bootloader) version-misc: PVT SHIP [B]S-OFF[/B]
(bootloader) serialno: Censored
(bootloader) imei: Censored
(bootloader) meid: 00000000000000
(bootloader) product: [B]m7_ul[/B]
(bootloader) platform: HBOOT-8064
(bootloader) modelid: [B]PN0713000[/B]
(bootloader) cidnum: [B]T-MOB010[/B]
(bootloader) battery-status: good
(bootloader) battery-voltage: 4040mV
(bootloader) partition-layout: Generic
(bootloader) security: [B]off[/B]
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
My HTC One is S-OFF, unlocked bootloader, with TWRP 2.6.3.3 installed. Not sure if it matters but I'm running ARHD 82.0. I already have the 6.10.531.9 RUU file from the official HTC Support website.
So my question is: How do I run this RUU? Do I need to do anything to my phone before running the RUU.exe file? And after flashing the RUU, will I still receive OTA's from T-Mobile?
Thanks.
You have to relock your bootloader. After that, just boot your phone into fastboot and run the RUU.exe
You'll receive the OTA from TMO again. I've done it a few time.
JSing said:
You have to relock your bootloader. After that, just boot your phone into fastboot and run the RUU.exe
You'll receive the OTA from TMO again. I've done it a few time.
Click to expand...
Click to collapse
Even if I'm S-OFF? And will I be able to unlock it again?
uwotm7 said:
Even if I'm S-OFF? And will I be able to unlock it again?
Click to expand...
Click to collapse
Yes you'll retain your S-OFF after it and you can unlock it again if you want.
uwotm7 said:
Even if I'm S-OFF? And will I be able to unlock it again?
Click to expand...
Click to collapse
@JSing
FYI, if you are S-OFF you do not need to relock your bootloader to run a RUU or firmware.
Which RUU are you using, by chance. I am doing the same thing and trying to figure out which one I need. North American, unlocked. 32 GB. T Mobile.
knightsmarian said:
Which RUU are you using, by chance. I am doing the same thing and trying to figure out which one I need. North American, unlocked. 32 GB. T Mobile.
Click to expand...
Click to collapse
Try this one 6.10.531.9.
Currently I am running CM12 and here is my firmware info:
M8_UL_CA PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-1.21.213311491.A04G
OpenDSP-v47.2.2-00564-M8974_FO.1024
OS-
eMMC-boot 2048MB
Dec 2 2014,22:40:49.0
I have been trying all day to downgrade to 4.4.4 using RUU and zip files but no luck so far.
I have decided to finally go for sunshine. BUT sunshine wants me to use a stock or near stock rom. What rom would you suggest me to install? Or what other options do I have at this point?
devbro said:
I have been trying all day to downgrade to 4.4.4 using RUU and zip files but no luck so far.
Click to expand...
Click to collapse
You are only "downgrading" the ROM, not the firmware. RUU should work fine, as long as its the AT&T 4.4.4 RUU. Did you relock the bootloader? Any error messages for the RUU?
No idea what "zip files" you are trying to flash (stock ROM, firmware, zip full of porn?) as you are the opposite of specific.
devbro said:
I have decided to finally go for sunshine. BUT sunshine wants me to use a stock or near stock rom. What rom would you suggest me to install? Or what other options do I have at this point?
Click to expand...
Click to collapse
Its pretty self explanatory, a stock AT&T ROM is your best best.
redpoint73 said:
You are only "downgrading" the ROM, not the firmware. RUU should work fine, as long as its the AT&T 4.4.4 RUU. Did you relock the bootloader? Any error messages for the RUU?
No idea what "zip files" you are trying to flash (stock ROM, firmware, zip full of porn?) as you are the opposite of specific.
Its pretty self explanatory, a stock AT&T ROM is your best best.
Click to expand...
Click to collapse
I keep on getting error 155 from RUU. and attempting to lock bootloader gives me SPMI write failure.
I have tried this file last:
http://dl3.htc.com/application/RUU_...40.45.C33065.00_F_release_426617_signed_2.exe
still no go
To confirm, your bootloader currently says UNLOCKED?
What is your current CID?
redpoint73 said:
To confirm, your bootloader currently says UNLOCKED?
What is your current CID?
Click to expand...
Click to collapse
My bootloader is unlocked.
cid: CWS__001
here is a fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA45AWM06131
(bootloader) imei: AAAAAAAAAA
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.073s
Everything on the phone looks okay to run an AT&T RUU. It sounds like you tried more than one, so that pretty much eliminates the possibility the RUU file was damaged/corrupt, etc.
Did you by change convert to GPE (black bootloader screen)?
I have an AT&T M8 which has an old version of the GPE SkyDragon ROM installed.
Bootloader is unlocked, S-ON is still ON.
Android version: 5.0.1
Baseband version: [email protected]_40.34.C35006.02_F
Kernel version: 3.4.0-SkyDragon-V3.0.7 from Jan 2014.
Build number: SkyDragon - LRX22C.H5
I want to send this phone to another country, and for that I need to get it sim-unlocked. I got the unlock code from AT&T, but it doesn't work - I am assuming the ROM is at fault, so I am trying to get the phone back to full stock by flashing an official RUU.
I downloaded the latest official RUU from http://www.htc.com/us/support/htc-one-m8-att/news/, but I cannot get it to flash!
When trying and the phone is booted to regular android, it tells me about error 170, which, as I gather, means it cannot find the phone.
I installed HTC Sync, and that can't find the phone either.
If I reboot to bootloader, the RUU installer finds the phone, but after the HTC logo (silver with black background) shows up on the phone, it throws error 171.
It feels like I need to relock the bootloader but I am afraid to mess it up now.
Please help with some guidance..
Here is the bootloader screen:
Edit: Found an old RUU on my hard drive, version 3.42.502.1 - same as OS version in the screenshot.
I attempted to flash it (using the official exe). It failed on "updating signature" with error 155.
Edit2: Made sure CID and MID match original - they do.
Attempted 'fastboot oem lock'. Now trying to flash the old RUU again.
Edit3: Looks like it's working! RUU is progressing further than ever before.
Edit4: It worked! Booting to Sense now.
Edit5: SIM unlocked worked too, phone is ready to go.
I'll leave this post up in case someone else faces a similar situation.
To run the Marshmallow RUU, try to flash the MM firmware first. See the red font note under the RUU section of my Index thread: http://forum.xda-developers.com/showthread.php?t=2751432
I was actually able to just flash the latest official RUU over 3.42.502.1 without the need for commandline.
Back to Stock
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.502.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT45SWM06618
(bootloader) imei: XXXXXXXXXXXXXXX ( Deleted)
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.125s
Bootloader - Unlocked
Recovery - TWRP
Rooted - Yes
Custom ROM - Resurrection Remis 5.8.5 Final
if want to go back to stock what is procedure
i have below RUU
RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502. 5_combined.exe
can i run this exe after relock the bootloader?
Hi, I was trying to revert back to the stock AT&T 6.0 rom using the RUU. I have "Android Revolution HD 53.1" currently installed which is Android 6.0 and Sense 7.0. It is unlocked and S-on, so I re-locked the phone using the fastboot method. After that the fastboot screen had "***RE-LOCKED*** and ***SECURITY WARNING***" on it. The phone would not reboot normally anymore, it would only go to the fastboot/hboot screen. I tried using the RUU anyway, and while it would detect the phone during the setup stages, as soon as it started the update and the phone switched to the htc screen, it would stop and give "error 171 - lost communication with the device."
So I've unlocked it again and it's working fine again. How can I revert it to the stock rom without making it S-off? Thanks!
Oh and if it matters, on the fastboot/hboot screen, it does show an OS version. It just has "OS-"
Edit: Looked at my previous posts as it's been a while since I've came here. Saw that I made a post last year with a similar problem and that switching USB ports on my computer fixed it. Well, switching USB ports fixed this problem too.
rockr09 said:
Saw that I made a post last year with a similar problem and that switching USB ports on my computer fixed it. Well, switching USB ports fixed this problem too.
Click to expand...
Click to collapse
Nice work figuring it out yourself!
rockr09 said:
After that the fastboot screen had "***RE-LOCKED*** and ***SECURITY WARNING***" on it. The phone would not reboot normally anymore, it would only go to the fastboot/hboot screen.
Click to expand...
Click to collapse
FYI, this is normal and expected. Relocking the bootloader renders the phone unable to boot, as it expects RUU to be run immediately thereafter.
Back to Stock
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.502.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT45SWM06618
(bootloader) imei: XXXXXXXXXXXXXXX ( Deleted)
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.125s
Bootloader - Unlocked
Recovery - TWRP
Rooted - Yes
Custom ROM - Resurrection Remis 5.8.5 Final
if want to go back to stock what is procedure
i have below RUU
RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502. 5_combined.exe
can i run this exe after relock the bootloader?