Related
The 920 feels really slippery to be. I'm sure I'll drop it at some point when using it one-handed.
I don't want a big protective case, but just something to add texture to the back of the phone.
Is there some kind of texturized skin I could stick on? (Ideally with no residue if I remove it)
Or some other rubber that would stick on the back?
Or even a really thin silicon case?
I can't be the only one with this problem, has anyone else noticed this and found a good solution?
mattsnowboard said:
The 920 feels really slippery to be. I'm sure I'll drop it at some point when using it one-handed.
I don't want a big protective case, but just something to add texture to the back of the phone.
Is there some kind of texturized skin I could stick on? (Ideally with no residue if I remove it)
Or some other rubber that would stick on the back?
Or even a really thin silicon case?
I can't be the only one with this problem, has anyone else noticed this and found a good solution?
Click to expand...
Click to collapse
I agree that the phone is slippery ... and I started by using a gel case ... which worked, and it had knobby grips on the edges of the case -- and that worked very well to stop dropping the phone (I did that several times before I put the case on it).
Then I tried a phone with the Nokia CC-1043 case ... but that also was too slippery for me. I tried some egrip (they are non sticky things that will "stick" to most any surface ... and if you want something on the back of the phone -- there are pads that are 1" by 2" (about) that would work. However, for me, I wanted something on the edges -- so that I could get it out on the vertical holster that I use. The egrips on the edges did not stay formed along the curve of the case ... so I modified the CC-1043 with some grooves on the edges -- which really works great!
I was going to post some pictures, but I don't have access to a web site for the insertion ... If you send me a private message, I can send you the pictures ...
The grooves were made using a bandsaw with a block of wood taking the place of the phone to provide stability to the case as it was cut ... and there was a block of wood to stop how far into the blade that the case would go, and resulted in a cut that is about 1/2 mm deep ... it provides enough grip to grab the phone out of the case and while holding it -- most of what my hand / fingers are touching are the edges of the phone ...
It depends on which color you have. The blue and red are not as slippery. But I have Ghost armor on mine and it gives it a slightly tacky feel in addition to protecting it from scratches. Mine is red.
I have the black one (matte finish).
Is this the egrips you mentioned? http://www.egrips.com/
It sounds like that might be too much grip. I don't want to have trouble getting the phone into/out of my pocket. I just want more grip so that I don't constantly feel like it's going to fly out of my hand.
I looked at the case you mentioned here and it sounds good: http://www.amazon.com/Nokia-02733P4-CC-1043-Cover-Lumia/dp/B009T8YXCA but having some texture built-in would be nice (as opposed to your DIY grooves).
So I looked at related products and found the following:
http://www.amazon.com/Worldshopping-Black-Matte-Quicksand-Accessories/dp/B00A1Z3U3S/ref=pd_sim_cps_7
http://www.amazon.com/JKase-Premium-Quality-Nokia-Streamline/dp/B00A1UPHYS/ref=pd_sim_cps_17 (the sides of this seem ideal)
http://www.amazon.com/Fosmon-Series-Protective-Nokia-Lumia/dp/B009YLCFZY/ref=pd_sim_cps_3 (don't like the color)
http://www.amazon.com/NOKIA-LUMIA-HYBRID-RUBBERISED-COVER/dp/B009YB0P5G/ref=sr_1_1 (mentioned by a reviewer above)
Can anyone speak for those cases? Probably going to make a decision between those 5 in a day or so.
I had a case like the JKase ... and it is OK, but it adds some noticeable weight to the phone ... it is the one with knobby sides ... it has a very thin strip along the front-bottom of the case that is along the micro USB connector and the speakers ... it never was straight, but it also didn't seem to provide much function ... read other posts that said that they cut it off ...
Don't know about the other cases ...
The egrips link that you have are the ones that I tried ... I always use a case and never just in the pocket -- so I don't know if it would cause a problem ...
Like I said, I like the Nokia case after the modification ... before it, it was still at risk of being dropped ...
mattsnowboard said:
The 920 feels really slippery to be. I'm sure I'll drop it at some point when using it one-handed.
I don't want a big protective case, but just something to add texture to the back of the phone.
Is there some kind of texturized skin I could stick on? (Ideally with no residue if I remove it)
Or some other rubber that would stick on the back?
Or even a really thin silicon case?
I can't be the only one with this problem, has anyone else noticed this and found a good solution?
Click to expand...
Click to collapse
The cc-1043 cases is matte see my ebay sale!
Electrical tape to a thin plastic case.
Simple, thin, and adds a lot of grip. However, it can cause issues if you work in a very hot environment as the tape will goop and slip. Otherwise, I do this with almost all of my devices.
Add texture to slippery cell phone
To make your phone less slippery, you can add textured stickers to it. The kind that you would put on the bottom of the bathtub to prevent slips.
I bought some good ones at Bed, Bath, and Beyond. You can cut them into any shape you want. They were actually shaped like fish. I cut them into strips and put a few on the back of the phone and on the sides.
You can find them in many colors.
Amazon has a good selection.
Surprised nobody has mentioned Ghost Armor. It's perfect for what you want.
I bought their MatteArmor for the back of my Samsung Galaxy tablet and to provide a matte finish instead of it's slippery plastic.
Increased holdability (made up word lol) and maintains the look of the device because it's transparent and thin.
It's that good I paid to have it shipped from the USA to UK. Lifetime warranty, 30 day money-back guarantee
Here's a link to the Lumia range but they do literally any device.
Just bought silicone case from dx.com. Transparent, back side is matted. Not bad for this price, but flash working incorrect - fills all the frame because case scatters light
I'm a a sailing captain and watch people dropping their phones all the time, breaking glass and going overboard. I looked for a solution and couldn't find on that fit the bill as being easy to use, no installation, fits most phones and cases, so I invented one for me. People wanted one, so I patented it and just started production. Just search CellGrasp in google. You'll find me. Drop me a note and you can check it out at the site. Dropping cell phones is a real and growing problem. CellGrasp is a device that is a solution to the problem. Simple, easy, secure, better pics and vids instantly. Just for your information...
Anyone find any good tpu cases?
I found a couple on Amazon but most with bad reviews. Most complaints were that the cases do not fit.
I found this one.
http://www.amazon.com/dp/B00I86GGII/ref=cm_sw_r_udp_awd_22zhtb0CC8DKH
It has no reviews yet and I bought it ...I don't have it yet... But let's hope it's good.
I have this one. It fits. It's snug, but it fits. The buttons are pretty hard to press though. It will do until some other options come out I guess!
If I could have any case for this device, I would want a Gumdrop Bounce Skin.
My wife has one for her Ipad air with a glass screen protector and there is nothing like it. Survives drops and a 5 year old, feels great to touch, sticks to your hand so you can use if one handed without a strap, sticks enough to a table or whatever so you can just lean it up against anything (wall, pillow, monitor, shelf, pencil holder, ...) and it stays at the same angle you set it down at, easy.
I just love this thing. If gumdrop doesn't make it, I'm going to have to bribe a silicone guy and get him to copy one for me. I think I could almost duplicate it with RTV silicone rubber if I bought two of them cut them up to fit and then did a two part mold, but it would take a bit of thinking and I don't know how well RTV silicone would last (but it would have the right shore A hardness to feel great and "stick" in all the right ways).
The best thing about the case is that while it grabs lint and stuff like most silicone cases, it does not feel bad and does not inhibit its stickiness. This might not make sense to you if you aren't acutely aware of everything you touch and how it feels (and I wish I didn't), but if you are sensitive to it, this is amazing. Now I haven't covered it in baby powder or anything, but it is amazing not having to worry about tossing it on a pile of laundry or the bed or the carpet and it not getting so covered in tiny dust that you feel like you have to wask it off. Even my otterbox for my GS4 makes me feel like that sometimes, but not my wife's gumdrop bounce, man I'm envious of that skin.
If you want here is the link to it on amz. for the ipad. they even have it in like 7 colors, I just wish they made it for the Note pro.., maybe they will.
http://www.amazon.com/Gumdrop-Cases-Bounce-Skin-BOUNCE-IPAD5-LTBLU-V3/
I got my Poetic Graph Grip yesterday. I'm pretty torn about it. The fit is great, it is much better protection than the Fosmon case linked above that I have, it is comfortable to hold BUT... it is heavy!! It adds a significant amount of weight to an already large tablet. And it also seems to be a bit of a dog fur/dust magnet. Which is a problem in a house with three dogs! So I'm not sure whether I will continue to use it or not.
OK I got the tpu case.... And it's pretty good. The buttons are a little hard to press especially the power button.... Other than that it's not bad.
Sent from my SM-P900 using Tapatalk
I do not usually put my phone in a case because I do not like to add bulk. I like to keep it as slim and trip as possible. I am coming from a prior phone that had a rubberized surface on the edges and back (Droid MAXX - the original). The Pixel is a bit slippery for me.
I am curious what solutions people would recommend for the best way to add grip to the Pixel without adding bulk. Maybe I need to go with one of the thin cases, or maybe there is a skin that could help? I don't need to decorate the phone, but if there is a skin that helps it grip better I would give it a try.
Your options are case, skin, and naked. For cases, you're not going to get any thinner than the Nillkin Nature cases. I'm not a fan of the one I have but it's undeniably low in bulk. For skins, the are a ton of options and you'll have a variety of opinions but if you don't want a case, that's about your best option.
Some skins are grippier than others, even win a single manufacturer, so it's worth asking the manufacturer about it. For example, for dBrand their grippier skins tend to be the carbon fiber options.
Good luck!
I've said this in the other cases thread on here, but I'll post again just in case people don't know about that other thread.
Caudabe (http://www.caudabe.com) makes great, very slim cases for iPhones.
If you email/tweet them to make Veil XT for Google Pixel/Pixel XL, they might consider it.
You can try reaching out to Shumuri too (http://shumuri.com)
I wish that their was an antigravity case for the pixel... I can't stand mounts and would love to just stick my phone to my instrument panel
Based on my experience with them on other phones, a skin won't provide anywhere near as much grip as the surface on that Droid Maxx.
Instead, take a look at the thread on ultra-thin cases:
http://forum.xda-developers.com/pixel/accessories/ultra-case-t3483579
The Nillkin Nature cases are very slim and definitely add grip to the phone. You can see pics in my post here:
http://forum.xda-developers.com/pixel/accessories/pixel-t3475315/post69764947#post69764947
Google Pixel (XL) Matte Black Skin Premium Quality SAMSUNG 3M Scotchprint 1080
http://www.ebay.com/itm/291970270753?var=590965880055
You can't go wrong with the UAG cases. The plasma series is surprisingly thin and light, but really has great edge and drop protection. they feel great in the hand. They are a little higher in price, but totally worth it.
https://urbanarmorgear.com/collections/type-plasma-series/products/plasma-series-google-pixel
I had one for my Note 5 and then S7, and I'm will be picking up another for my Pixel.
Sent from my Pixel using Tapatalk
Metalsauce said:
You can't go wrong with the UAG cases.
Click to expand...
Click to collapse
+1. I received the Ice case yesterday; using it on the silver Pixel. I wanted a slim grippy case, one with black rubber to hide the darkening that occurs with time on rubbery areas of phone cases, and a clear back to display the silver/white of the phone. This case is PERFECT. It looks great. And the grip is fantastic.
I just received a blue Speck Presidio Grip and it's a very nice case for adding grip. The blue one is hard to find unless you pay quite a bit of $$ (I found a listing on eBay for used under $20) but the black version can more easily be found for under $20.
The case fits very well without being too difficult to take on and off. The added grip is good without being extreme. The hard plastic has a nice matte feel to it (the previous Speck cases I had was glossy but I like this better). And the buttons have a good clicky feel to them. It's not a minimalistic case like the Nillkin Nature but it's tons better than something like the Incipio Dual Pro.
Hope this helps somebody!
I've been meaning to try the DBrand skins for a while. Just ordered the bamboo version for my silver Pixel. Will update how it is. I have high hopes as the reviews are overwhelmingly positive.
Sent from my Pixel
kkh786 said:
I've been meaning to try the DBrand skins for a while. Just ordered the bamboo version for my silver Pixel. Will update how it is. I have high hopes as the reviews are overwhelmingly positive.
Click to expand...
Click to collapse
They are very good skins! Do yourself a favor and be sure to use their videos for installation, don't skip steps, and give yourself plenty of time.
Just installed the bamboo skin. Looks good. Not perfect installation as am not patient enough. Haha.
Sent from my Pixel
I'm getting a Slickwrap skin. I've been using dbrand for a while now... Just want to try something different.
I've purchased two Toast skins now and I really like them. Because they are actual wood they are really nice and grippy with the added benefit of that if you drop your phone, the wood will absorb some of the shock. It's prevented a few dings for me. Plus they can laser etch anything you want on there...
josephpalozzi said:
I've purchased two Toast skins now and I really like them. Because they are actual wood they are really nice and grippy with the added benefit of that if you drop your phone, the wood will absorb some of the shock. It's prevented a few dings for me. Plus they can laser etch anything you want on there...
Click to expand...
Click to collapse
I've had Toast on phones and laptops. Great products although I prefer them on non-phone devices because it's impossible to put a case over top of it and sometimes you just need heavy duty protection.
grippy case
Hi
I got this within 10 days of ordering - very cheap - but it really adds grip and hardly any bulk
https://www.aliexpress.com/item/Bla...nti-slip-soft-case-cover-for/32774241635.html
Pictures on the site are accurate
Jools
snowdej said:
Hi
I got this within 10 days of ordering - very cheap - but it really adds grip and hardly any bulk
https://www.aliexpress.com/item/Bla...nti-slip-soft-case-cover-for/32774241635.html
Pictures on the site are accurate
Jools
Click to expand...
Click to collapse
Looks good. Could you post some actual real life photos with the phone in it?
kEvinErd said:
Looks good. Could you post some actual real life photos with the phone in it?
Click to expand...
Click to collapse
Hi
https://goo.gl/photos/H2qcY2ECW1AcxEfEA
I have a best skins ever fitted with the glossy screen and matte body.
Also I have a qi receiver. You can see the USB port blocked by it
The buttons are cut outs so are quite recessed. I had a spigen case on just before that covers the buttons
This case is much less bulky than the spigen
The headphone port is possibly slightly wrong. If you have a headphone socket with a bulky top it might struggle. This is being picky though and I could just get a scalpel to it to increase the hole a mm
Jools
devilsadidas said:
I wish that their was an antigravity case for the pixel... I can't stand mounts and would love to just stick my phone to my instrument panel
Click to expand...
Click to collapse
There is the anitgravity space:https://megatinycorp.com/products/anti-gravity-space
This basically just sticks on to any case
Disclaimer : I do not benefit in any way for saying anything good or bad about these products. I am giving you guys my honest opinion on these cases to help provide some assistance on buying a case.
Let’s start with the first case I bought from them.
Orzly Flexicase (Clear)
Link to the case: https://www.amazon.co.uk/dp/B072MZCQB6/ref=cm_sw_r_cp_dp_T1_v8mFzb704M66R
Price :£12.99
Things I like: Simple case, adds much need grip to the OnePlus5. Doesn't detract from the overall phones aesthetic or feel. , Good lip around the camera bump and the front.
Things of concern: It's a simple case, it's mainly there to prevent scratches. Not going to protect your phone from anything major
Comments: I really like this case, there is a craft to a making something simple and effective and this is it. No fancy features it just protects your phone from scratches, adds grip and protects from small drops. It doesn't over stay it's welcome and I congratulate on that.
I was happy with my purchase at the price I paid but since it has gone down. I think anyone wanting a simple case you can't really go wrong with this.
Also like to note, I haven't had problems with any holes in the case. Some people on other forums have asked me about the quality of the finish. No evident problems with the finish of my case.
Photos: http://imgur.com/a/c8eOF
Orzly Wallet Case (Black)
Link to the case : https://www.amazon.co.uk/dp/B072QV1VRT/ref=cm_sw_r_cp_dp_T1_qInFzbCVEWP0X
Price: £14.99
Things I like: Protects the screen while it’s closed, Magnet keeps the wallet closed well, Effective card slots and pocket slot, Effective stand, I like the case that holds the phone in the wallet, not too bulky.
Things of concern: It’s a wallet case, people either love them or hate them.
Comments: I had this case for my HTC 10 and they have improved this case immensely. Now having three card slots instead of two allows me to take my bank card, ID and my public transport card without having to double up in the slots (That can create further issues). The main issue with last years was the case that held the phone in place. Last year was a hard shell, now throughout my time working with phones, more than half of wallet cases I have seen have broken inner shells because they use a hard shell inside. This year they have basically taken the great Flexicase design and used it as the holder for the wallet case. That was a great move and make the wallet case great.
For a wallet case, this is a solid wallet case. You can’t really go wrong with it.
Photos: http://imgur.com/a/j1FFv
Orzly Slim Stand Case
Link to the case : https://www.amazon.co.uk/gp/product/B073S7BWQQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Price:£12.99
Things I like: THIS THING IS SLIM, the case itself may be the lowest profile case I have used on the OnePlus5, The stand can withstand a lot, stand can be rotated in different ways.
Things of concern: This case may not work with some in-car phone holders, the stand bulges out and made it hard for my vent holder to hold it.
Comments: I picked up this case because I was intrigued. I didn’t think I would like it but I really did! The case has a really nice soft touch finish and provides protection for the camera bump which is surprising as the case is really low profile , it provides a very small lip on the front so it may or may not protect the phone from if you put your phone screen down. The case doesn’t really take much away from the buttons which is nice.
The ring stand is really handy, A couple of times I’ve used it. I do find myself playing with the ring stand itself and hanging my phone off my finger, the case fits very well I can trust that my phone will stay there hanging. The stand really is quite strong. I can put a lot of force on the stand and it didn’t feel like it would break, (I have posted a video demoing that) The things I would say is that I would like the stand to have different standing points, it would be nice to have the phone to stand at different angles, while this isn’t a major thing, I thought I’d point it out.
I really like this case, nuff said.
Photos: http://imgur.com/a/kHBlm
Video:
Orzly Fusion Case
Link to the case : https://www.amazon.co.uk/gp/product/B072MPYX9Y/ref=od_aui_detailpages00?ie=UTF8&psc=1)
Price: £9.99
Things I like: Not bulky, feels like it would protect the case.
Things of concern: Can’t think of anything…
Comments: This is the case I have on my OnePlus5, I really like it. It’s like the FlexiCase but better. This honestly feels like this case has been designed by someone who’s wanting a make a case for themselves. There is extra grip points around parts of the case which your hand is in contact with. That’s a smart move. There is some little feet on the back around the clear back, this is a expert level move from Orzly, clear plastic scratches easily by doing this the plastic clear back from the ground. The clear back is quite hard and seems like it could withstand a drop, this is the motto of this case: it’s solid.
Photos: http://imgur.com/a/CqoVz
Comments About Orzly
One thing I have noticed is Orzly has revamped their packaging. It’s more like you would see in a shop and has nice little touches to them. Having a little tab to pull to open the box and having nice information (To read on the toilet obviously) adds to the over. Here is some photos : http://imgur.com/a/vZ4eu
Please ask any questions and if this helped someone, if you liked it I may do more.
Thanks so much for this. I agree with the flexicase and slim case, both have been great for me and I have already used the stand on the slim case for a train journey. Worked out great. I am looking forward to receiving my fusion bumper case from the reviews both you and niijonodhg have been giving!
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
abe2912 said:
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
Click to expand...
Click to collapse
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
abe2912 said:
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
Click to expand...
Click to collapse
If it helps, my favourite case so far has been the Fusion!
DarkExistence said:
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
Click to expand...
Click to collapse
Yes you do make it harder ?. I never used cases mainly for protection but more for the extra grip but dropping my OP5 makes me reconsider this. But when I dropped it I didn't have any case installed so it was pretty slippy. Maybe I try both cases as they are not that expensive .
abe2912 said:
Yes you do make it harder ?. I never used cases mainly for protection but more for the extra grip but dropping my OP5 makes me reconsider this. But when I dropped it I didn't have any case installed so it was pretty slippy. Maybe I try both cases as they are not that expensive .
Click to expand...
Click to collapse
Getting both of them might be a good option. My favorite is the fusion but the slim case is really good. The slim case adds grip to the phone without much bulk or extraprotection where as the fusion is really grippy as well as adding more protection.
DarkExistence said:
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
Click to expand...
Click to collapse
Yeah the stand feature for me is a must. Personally I prefer the Wallet Case version, as it's got that extra bit of screen protection with the fordable lid. But they're all nice in different ways.
AnabolicAndroidz said:
Yeah the stand feature for me is a must. Personally I prefer the Wallet Case version, as it's got that extra bit of screen protection with the fordable lid. But they're all nice in different ways.
Click to expand...
Click to collapse
Any stand is nice really, what I like about the slim stand case though is that you can put your finger in the ring and it will mean your phone cant drop, very useful actually
Just received my Orzly Fusion today and have to say: that thing is amazing! Adds minimal bulk but seems to be good protection. And the best thing is that it adds so much grip to the phone and makes it really comfortable to use.
abe2912 said:
Just received my Orzly Fusion today and have to say: that thing is amazing! Adds minimal bulk but seems to be good protection. And the best thing is that it adds so much grip to the phone and makes it really comfortable to use.
Click to expand...
Click to collapse
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
ab7casper said:
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
Click to expand...
Click to collapse
Looks really good with that dbrand skin! Glad to know you had the same sort of material that didn't yellow
ab7casper said:
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
Click to expand...
Click to collapse
That is beautiful!
Finally got my video up:
niijonodhg said:
That is beautiful!
Finally got my video up:
Click to expand...
Click to collapse
Good video, I definitely agree. There's not much else to say about it.... Its a good case. It really compliments the phone.
ab7casper said:
Good video, I definitely agree. There's not much else to say about it.... Its a good case. It really compliments the phone.
Click to expand...
Click to collapse
Thanks!
Hi:
Has anyone found a reasonably high quality case for the LG X Venture/X Calilbur V9?
I love my X Venture, but I've already tried 3 cases for it. The first case-a MiniTurtle was complete garbage-unusable.
https://www.amazon.com/gp/product/B06Y2KZPD9/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
The second one, a Spevert, sold on Amazon
https://www.amazon.com/gp/product/B073XCWJ6P/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
was almost usable, but provided minimal protection, and was also somewhat junky.
The third, a Zizo Bolt, looked to be quite well-made in many ways, and provides good protection. However, the buttons are inline or even slightly recessed from the edge of the case, and also stiff. That makes them extremely difficult to press. The case is also a little too slippery in the hand.
Does anyone know of a quality case for the X Venture? I'd prefer all TPU for grip, but two layers would be fine.
I'm using an Incipio NGP case and I really like it. I wish it was clear because I really like the design of the X venture and I would prefer not to hide it, but the case does give a nice extra layer of protection and I really like how it makes the buttons feel (the buttons on my phone require barely any force to press, which I really don't like. The case provides a little bit of extra stiffness so it makes the buttons feel a lot better. Definitely not too stiff though). It's also pretty grippy, but not quite as grippy as the bare back of the phone in my opinion.
I also tried a Speck clear case and I really didn't like it. It made the buttons feel awful and the material that it's made of - I didn't like how it felt in the hand and it's also totally smooth so it has much less grip than the bare back of the phone.
Thanks Rich. Is it fairly thick as cases go, thin, or somewhere in between?
Rich:
Thanks. Compared with other cases, is it thick, thin, or somewhere in between? Any chance you could measure its thickness? It's made of TPU, right?
RichBordoni said:
I'm using an Incipio NGP case and I really like it. I wish it was clear because I really like the design of the X venture and I would prefer not to hide it, but the case does give a nice extra layer of protection and I really like how it makes the buttons feel (the buttons on my phone require barely any force to press, which I really don't like. The case provides a little bit of extra stiffness so it makes the buttons feel a lot better. Definitely not too stiff though). It's also pretty grippy, but not quite as grippy as the bare back of the phone in my opinion.
I also tried a Speck clear case and I really didn't like it. It made the buttons feel awful and the material that it's made of - I didn't like how it felt in the hand and it's also totally smooth so it has much less grip than the bare back of the phone.
Click to expand...
Click to collapse
Shplad said:
Rich:
Thanks. Compared with other cases, is it thick, thin, or somewhere in between? Any chance you could measure its thickness? It's made of TPU, right?
Click to expand...
Click to collapse
It's decently thick, a little bit more than I expected, and it feels very sturdy. It's not one of those cheap thin cases. If I had to guess I would say it's somewhere around 1.5mm thick. I don't know if it's made out of TPU but the website says it's made out of a polymer material. It's flexible but still feels very sturdy.
I don't know if this will help at all but I took a picture of the back camera cutout so you can kinda get an idea of how thick the case is: https://i.imgur.com/BdDx5zo.jpg Like I mentioned before, to me it looks like maybe 1 - 1.5mm.
Rich:
Thanks again. I know what you mean-the X Venture is elegant looking, isn't it.
Mmmm..that looks like more than 1.5mm to me, but it's hard to tell. The other thing I really was hoping for was a belt clip, which the Incipio doesn't have. I will consider getting one anyways, though. I can use it on my second LG X Venture. I like the phone so much I bought a second one as a backup.
I'm emailed Armor-X to see if they have a case to fit the Venture. Why is this so hard?
Shplad said:
Rich:
Thanks again. I know what you mean-the X Venture is elegant looking, isn't it.
Mmmm..that looks like more than 1.5mm to me, but it's hard to tell. The other thing I really was hoping for was a belt clip, which the Incipio doesn't have. I will consider getting one anyways, though. I can use it on my second LG X Venture. I like the phone so much I bought a second one as a backup.
I'm emailed Armor-X to see if they have a case to fit the Venture. Why is this so hard?
Click to expand...
Click to collapse
Oh, if you're interested in one with a belt clip Pelican makes a heavy-duty case that comes with a belt clip I believe: http://www.pelican.com/us/en/product/phone-and-tablet-cases/lg-case/voyager/c31030 (a little bit too big for me)
Unfortunately it's not a super popular phone so our case options are a bit limited compared to, say, a flagship. Plus, it is a rugged phone so it does have some pretty good protection by itself.