Hi , I have tried almost all method to root chinese Phone based on the below configuration none of the Method work
I want to get the root access and get rid of the chinese Rom and install any custome rom can some help me root this phone and guide hot flash the custom rom and where I can get the Rom for below configuration
Hardware : MT6575
Model : hexing15_6626_gb2
Build number : ALPS.GB2.MP.V2.6
Build date UTC : 20121105-041448
Android v : 2.3.6
Baseband
v: MAUI.11AMD.W11.50.SP.V18.F1, 2012/10/23 19:26
Kernel v : 2.6.35.7 ([email protected])
(gcc version 4.4.3 (GCC) ) #1 Mon Nov 5 12:11:09 CST 2012
Hellions with BLUE flames !
Method Tried -
1. TPSparkyRoot
2.SuperOneClick
3 .MTKdroidTools
it does not get shell access ,
Can Some champ from XDA guide me how to root this Chinese phone
There is a Tool, which can root most Android 4.x devices:
http://forum.xda-developers.com/showthread.php?t=1886460
To use this tool, you need ADB drivers for your device. If you dont have them, here is a tutorial, how to get ADB drivers for your device:
http://forum.xda-developers.com/showthread.php?t=2157207
Kind regards Uwe
u.k-f said:
There is a Tool, which can root most Android 4.x devices:
http://forum.xda-developers.com/showthread.php?t=1886460
To use this tool, you need ADB drivers for your device. If you dont have them, here is a tutorial, how to get ADB drivers for your device:
http://forum.xda-developers.com/showthread.php?t=2157207
Kind regards Uwe
Click to expand...
Click to collapse
Thanks for sharing this
As attached in the Post and Config file my device is not branded and it runs Gingerbread 2.3.6
although I tried the method but it get stuck ..Gives the Following
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\sjaiswal22>cd dow
The system cannot find the path specified.
C:\Users\sjaiswal22>CD Downloads
C:\Users\sjaiswal22\Downloads>cd "china android project"
C:\Users\sjaiswal22\Downloads\china android project>cd Root_with_Restore_by_Bin4
ry_v18
C:\Users\sjaiswal22\Downloads\china android project\Root_with_Restore_by_Bin4ry_
v18>runme
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (18.12.2012) v17 =
======================================================================
Device type:
1) Normal
2) Special (for example: Sony Tablet S, Medion Lifetab)
x) Unroot
Make a choice: 1
Checking if i should run in Normal Mode or special Sony Mode
Please connect your device with USB-Debugging enabled now
Waiting for device to shop up, if nothing happens please check if Windows ADB-dr
ivers are installed correctly!
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
remote object '/system/app/Backup-Restore.apk' does not exist
remote object '/system/bin/ric' does not exist
.
.
Normal Mode enabled!
.
Pushing busybox....
4155 KB/s (1085140 bytes in 0.255s)
Pushing su binary ....
2721 KB/s (91980 bytes in 0.033s)
Pushing Superuser app
4159 KB/s (996704 bytes in 0.234s)
Making busybox runable ...
.
adb: unable to connect for backup
Please look at your device and click RESTORE!
If all is successful i will tell you, if not this shell will run forever.
Running ...
Successful, going to reboot your device in 10 seconds!
error: device not found
Waiting for device to show up again....
Going to copy files to it's place
mount: permission denied (are you root?)
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
C:\Users\sjaiswal22\Downloads\china android project\Root_with_Restore_by_Bin4ry_
v18>runme
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (18.12.2012) v17 =
======================================================================
Device type:
1) Normal
2) Special (for example: Sony Tablet S, Medion Lifetab)
x) Unroot
Make a choice: 1
Checking if i should run in Normal Mode or special Sony Mode
Please connect your device with USB-Debugging enabled now
Waiting for device to shop up, if nothing happens please check if Windows ADB-dr
ivers are installed correctly!
remote object '/system/app/Backup-Restore.apk' does not exist
remote object '/system/bin/ric' does not exist
.
.
Normal Mode enabled!
.
Pushing busybox....
3853 KB/s (1085140 bytes in 0.275s)
Pushing su binary ....
2641 KB/s (91980 bytes in 0.034s)
Pushing Superuser app
3877 KB/s (996704 bytes in 0.251s)
Making busybox runable ...
.
adb: unable to connect for backup
Please look at your device and click RESTORE!
If all is successful i will tell you, if not this shell will run forever.
Running ...
shanky76 said:
...If all is successful i will tell you, if not this shell will run forever.
Running ...
Click to expand...
Click to collapse
I am sorry, this method can only work on Android 4.x devices, because it uses a small security gap only available at 4.x android devices...
I was my fault, not to have read that you have 2.3.6
In this case, I will look, if I find something different for you
Kind regards Uwe
I used gingerbreak for my android 2.3 phone. But it wasn't a mtk6575 phone.
Thanks mate
Yes they are bit different stupid phones
none of the method specified could work i thought to do Manual rooting but that requires the TWRP to be ported .that is also failing .
I am keen to know how to root all Android Chinese phones too... I have a Hero H4300 MTK6573 device which I use for learning purposes.
no way to root s3/y1?
Hi I bought a ZTC SAMSUNG S3/Y1
i want to make it root but i can't i have read some topics about root but none of them works and also moborobo can not load my device name,
what can i do?
Please help
here is the list detail
linux version 2.6.35.7 ([email protected])(gcc version 4.4.3 (GCC) #1 PREEMPT MON MAR 4 19:06:18 CST 2013
BogoMIPS: 1998.84
Feauter: swp halt thumb fastmult vfp edsp thumbee neon vfpv3
Hardware: MT6575
Revision: 65fb8a00
try this, i am using last method (rooting via twrp) for lenovo a690, and it work fine ...
http://forum.xda-developers.com/showthread.php?t=1923764
Haier W910 Chinese -Rooting Worked with Oneclickroot
aramic said:
Hi I bought a ZTC SAMSUNG S3/Y1
i want to make it root but i can't i have read some topics about root but none of them works and also moborobo can not load my device name,
what can i do?
Please help
here is the list detail
linux version 2.6.35.7 ([email protected])(gcc version 4.4.3 (GCC) #1 PREEMPT MON MAR 4 19:06:18 CST 2013
BogoMIPS: 1998.84
Feauter: swp halt thumb fastmult vfp edsp thumbee neon vfpv3
Hardware: MT6575
Revision: 65fb8a00
Click to expand...
Click to collapse
Haier W910 Chinese -Rooting Worked with Oneclickroot
Worked with Oneclickroot ..google it You can fine easliy
You can try with that
Hello,
I have been struggling to root my new tablet for 2 days now without success.
I also have apple devices and jailbreak them for years without any problem but today I am completly stucked.
I am unable to intall correctly the ADB Interface... It is impossible.
I tried to install, desinstall, reinstall many times the usb drivers. Restart the computer many times...
I tried the SDK android tool with installation of the USB driver package v7.
I tried with PDANet.
I tried with the package of Xboxepert guy who posted a very easy way rooting process on xda developper...
Nothing is working.
I still have an exclamation point on the device !!
When I try to install the drivers, it always tells me (sorry for my translation, I am french !!):
"An error occurs during the hardware installation
A service installation section of the INF file is not valid".
I am under XP 32 bits SP3.
I would be very happy if someone knew what to do or help me to go through...
It is driving me crazy ..
Thank you for your help.
Christophe
Rooting problem
It seems that I succeed to set-up the ADB interface.
I can interact with my device with adb.exe in the command prompt shell, things like "adb shell" ...
But I can not root, using motochopper or the tool form xboxepert..
I tried with SRSRoot tool too.
I have made a complete restore of my device from scratch....
Always the same:
cannot stat 'pwn': No such file or directory
Unable to chmod /data/local/tmp/pwn: No such file or directory
[*] Pushing root tools...
1149 KB/s (91980 bytes in 0.078s)
1823 KB/s (1867568 bytes in 1.000s)
1893 KB/s (969701 bytes in 0.500s)
pkg: /data/local/tmp/Superuser.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
[*] Rooting device
/system/bin/sh: /data/local/tmp/pwn: not found
[*] Cleaning up...
rm failed for /data/local/tmp/pwn, No such file or directory
[*] Exploit complete. Rebooting device.[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[*] Flashing CWM Touch Recovery!
1740 KB/s (7045120 bytes in 3.953s)
/system/bin/sh: su: not found
[*] All Done! Final reboot!
solved
I don't know how I made it but I tried a last time and it worked.
Envoyé depuis mon M470BSA en utilisant Tapatalk 4 Beta
i recently started using genymotion i am newbie as they say, i figured out how to launch apps but the problem is the apps the i installed successfully are chat or programs apps only no games apps want to be installed on the virtual device i always get this message failure install failed cpu api incompatible, i am using 2 pcs
both windows 7 x64 both got the same issue, below is a sample of the cmd commands i did with the results cmd commands i used :
The system cannot find message text for message number 0x2350 in the message file for Application.
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
The system cannot find message text for message number 0x8 in the message file f
or System.
E:\ABD\adt-0\adt-bundle-windows-x86_64-20131030\sdk\platform-tools>adb install D
:\WhatsApp.apk
6168 KB/s (11806415 bytes in 1.869s)
pkg: /data/local/tmp/WhatsApp.apk
Success
E:\ABD\adt-0\adt-bundle-windows-x86_64-20131030\sdk\platform-tools>adb install D
:\ClashofClans.apk
5846 KB/s (49389710 bytes in 8.249s)
pkg: /data/local/tmp/ClashofClans.apk
Failure [INSTALL_FAILED_CPU_ABI_INCOMPATIBLE]
E:\ABD\adt-0\adt-bundle-windows-x86_64-20131030\sdk\platform-tools>
all i did i just installed these virtual devices
Galaxy S4-4.3 - API18 - 1080x1920 WXGA 10.1 Tablet - 4.3 - API 18 - 1280x800
so if u have any Questions or effective suggestions please help me
Best Regards,
Alex
you have already made 2 duplicates of this thread.. please dont make anymore.
Also this is not the right forum to address this. maybe u will have better luck here.
Q&A for [Z Ultra][TWRP][PhilZ Touch][CWM] XZDualRecovery Q&A
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Z Ultra][TWRP][PhilZ Touch][CWM] XZDualRecovery Q&A. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Cannot go to recovery
I have installed this dual recovery to stock rom and i managed to change my rom to Cm11 snapshot which is a great rom. however i was trying to go to recovery and apparently im not going anywhere. Yellow LED light up but im not going to any recovery at all even after pressing volume up or down upon boot up. what am i doing wrong and what would be a possible fix for this? any help would be appreciated.:crying: thanks
rojculanag said:
I have installed this dual recovery to stock rom and i managed to change my rom to Cm11 snapshot which is a great rom. however i was trying to go to recovery and apparently im not going anywhere. Yellow LED light up but im not going to any recovery at all even after pressing volume up or down upon boot up. what am i doing wrong and what would be a possible fix for this? any help would be appreciated.:crying: thanks
Click to expand...
Click to collapse
CM11 will have over written this recovery when you installed it. Just after you start the boot the LED should go purple for a second or two, press the vol up key then and you should endup in CWM
blueether said:
CM11 will have over written this recovery when you installed it. Just after you start the boot the LED should go purple for a second or two, press the vol up key then and you should endup in CWM
Click to expand...
Click to collapse
Thank you for the reply mate. Thats"s what i thought also, i try to go to CWM,when purple LED lights up, i would press volume UP but it would just be stuck on SONY logo and yellow LED would light up and that's it. I have to restart the phone. is it ok to reflash the recovery? or would there be any step that I need to do. Thanks. Very appreciated.
rojculanag said:
Thank you for the reply mate. Thats"s what i thought also, i try to go to CWM,when purple LED lights up, i would press volume UP but it would just be stuck on SONY logo and yellow LED would light up and that's it. I have to restart the phone. is it ok to reflash the recovery? or would there be any step that I need to do. Thanks. Very appreciated.
Click to expand...
Click to collapse
try flashing the boot.img again or try another one (Carbon/DooMLoRD's/etc)
blueether said:
CM11 will have over written this recovery when you installed it. Just after you start the boot the LED should go purple for a second or two, press the vol up key then and you should endup in CWM
Click to expand...
Click to collapse
blueether said:
try flashing the boot.img again or try another one (Carbon/DooMLoRD's/etc)
Click to expand...
Click to collapse
thanks. I finally was able to do it. thank you. now im trying out Android Lollipop Port and it's great.
Code:
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?3
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found!
=============================================
Getting ro.build.product
=============================================
Device model is C6833
Firmware is 14.4.A.0.108
=============================================
Step2 : Sending the recovery files.
=============================================
mkdir failed for /data/local/tmp/recovery, File exists
0 KB/s (29 bytes in 1.000s)
15387 KB/s (15757 bytes in 0.001s)
0 KB/s (501 bytes in 1.000s)
11 KB/s (11842 bytes in 1.000s)
1790 KB/s (56834 bytes in 0.031s)
334 KB/s (3082 bytes in 0.009s)
0 KB/s (385 bytes in 1.000s)
1794 KB/s (657704 bytes in 0.358s)
1996 KB/s (2965760 bytes in 1.451s)
2494 KB/s (2599934 bytes in 1.018s)
2142 KB/s (1875823 bytes in 0.855s)
855 KB/s (8759 bytes in 0.010s)
=============================================
Step3 : Setup of dual recovery.
=============================================
=============================================
Attempting to get root access for installation using TowelRoot now.
NOTE: this only works on certain ROM/Kernel versions!
If it fails, please check the development thread (Post #2) on XDA for more detai
ls.
REMEMBER THIS:
XZDualRecovery does NOT install any superuser app!!
You can use one of the recoveries to root your device.
=============================================
=============================================
Sending files
=============================================
153 KB/s (1572 bytes in 0.010s)
1659 KB/s (13592 bytes in 0.008s)
cannot stat 'easyroottool\libexploit.so': No such file or directory
545 KB/s (9496 bytes in 0.017s)
1335 KB/s (13672 bytes in 0.010s)
Copying kernel module...
1122 KB/s (34473 bytes in 0.030s)
0 KB/s (765 bytes in 1.000s)
1659 KB/s (13592 bytes in 0.008s)
Kernel version is 3.4.0-perf-g0109737
Version does not match 3.4.0-perf-ge4322cd, needs patching...
1+0 records in
0+1 records out
19 bytes transferred in 0.001 secs (19000 bytes/sec)
Kernel module patched.
modulecrcpatch (by zxz0O0)
module_layout: match
__aeabi_unwind_cpp_pr1: match
kallsyms_lookup_name: not found
printk: not found
mem_text_write_kernel_word: not found
__aeabi_unwind_cpp_pr0: match
successfully patched
=============================================
Installing using zxz0O0's towelzxperia
(using geohot's towelroot library)
=============================================
towelzxperia (by zxz0O0)
thanks to geohot for libexploit
creating libzxploit.so
error: Could not open libexploit.so
/system/bin/sh: /system/xbin/busybox: not found
=============================================
Installation finished. Enjoy the recoveries!
=============================================
Aby kontynuować, naciśnij dowolny klawisz . . .
What am I doing wrong? Can anyone help? I have tried on the second laptop with the same result. Windows 7 x64.
Never mind. I didn't turn off antivirus.
Hi..
Wondering if I'm able to flash these cwm/ twrp
Into my togari 6833 (xperia z ultra)?
Error while installing on C6802 Xperia Z Ultra
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
error: more than one device and emulator
Device found!
=============================================
Getting ro.build.product
=============================================
error: more than one device and emulator
Device model is
error: more than one device and emulator
Firmware is
=============================================
Step2 : Sending the recovery files.
=============================================
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
=============================================
Step3 : Setup of dual recovery.
=============================================
error: more than one device and emulator
error: more than one device and emulator
Look at your device and grant supersu access!
Press any key to continue AFTER granting root access.
error: more than one device and emulator
Press any key to continue . . .
error: more than one device and emulator
error: protocol fault (status read)
error: more than one device and emulator
error: more than one device and emulator
=============================================
Installation FAILED!
Please copy and paste the contents of this
window to the DevDB thread for troubleshooting!
=============================================
Press any key to continue . . .
Problem while switching to recovery..
I installed recovery properly..
But when I am trying to switch recovery mod, It is directly switch on..
I am using a latest firmware 14.4.A.0.108..
Is there any solution for it??
I installed this successfully on my Z ULtra. However when I tried to do a nandroid backup or flash a custom rom i always face this error : cannot mount system ??
ANy solution to this ?
Thanks
Issues with Dual Boot Recovery
Hi,
Anyone can help me out?
I have an Xperia Z Ultra, freshly rooted with unlocked BL.
I installed Dual Recovery but for some reason, I can't reboot to any of the recovery this has to offer (PhilTouch, CWM, and TWRP).
Tried the physical button method and via NDR Utils with no success.
Looking at the log on the console, it looks like it failed to copy some files saying that a given directory is read-only but I checked using ES File Explorer that these directories are writable.
Can anyone help out as I would like to create a nandroid backup before messing with anything else just in case.
Anyway, here is the output of the installer console:
===========================================================
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found!
=============================================
Getting ro.build.product
=============================================
Device model is C6833
Firmware is 14.4.A.0.108
=============================================
Step2 : Sending the recovery files.
=============================================
19 KB/s (30 bytes in 0.001s)
4728 KB/s (16947 bytes in 0.003s)
326 KB/s (501 bytes in 0.001s)
4656 KB/s (11920 bytes in 0.002s)
5842 KB/s (56834 bytes in 0.009s)
1504 KB/s (3082 bytes in 0.002s)
3271 KB/s (30148 bytes in 0.009s)
453 KB/s (1162 bytes in 0.002s)
2805 KB/s (34473 bytes in 0.012s)
225 KB/s (924 bytes in 0.004s)
1896 KB/s (13592 bytes in 0.007s)
375 KB/s (385 bytes in 0.001s)
5405 KB/s (719520 bytes in 0.130s)
5668 KB/s (3419065 bytes in 0.589s)
5123 KB/s (2431545 bytes in 0.463s)
6589 KB/s (1936442 bytes in 0.287s)
3477 KB/s (8902 bytes in 0.002s)
=============================================
Step3 : Setup of dual recovery.
=============================================
Look at your device and grant supersu access!
Press any key to continue AFTER granting root access.
-rwxr-xr-x 1 shell shell 719520 Apr 8 14:27 /data/local/tmp/recover
y/busybox
Press any key to continue . . .
##########################################################
#
# Installing XZDR version 2.8.5 RELEASE
#
#####
Temporarily disabling the RIC service, remount rootfs and /system writable to al
low installation.
insmod: can't insert '/system/lib/modules/wp_mod.ko': File exists
Copy recovery files to system.
Copy chargemon script to system.
Copy dualrecovery.sh to system.
Copy rickiller.sh to system.
Installing NDRUtils to system.
Copy disableric to system.
Copy busybox to system.
Trying to find and update the gpio-keys event node.
Found and will be using /dev/input/event5!
sed: can't create temp file '/storage/sdcard1/XZDualRecovery/XZDR.propGnS20I': R
ead-only file system
Trying to find and update the power key event node.
Found and will be monitoring /dev/input/event4!
sed: can't create temp file '/storage/sdcard1/XZDualRecovery/XZDR.propUUaD89': R
ead-only file system
Speeding up backups.
touch: /sdcard1/clockworkmod/.hidenandroidprogress: Read-only file system
Make sure firstboot goes to recovery.
sed: can't create temp file '/storage/sdcard1/XZDualRecovery/XZDR.propTcsuIy': R
ead-only file system
sed: can't create temp file '/storage/sdcard1/XZDualRecovery/XZDR.propT1eL2g': R
ead-only file system
=============================================
DEVICE WILL NOW TRY A DATA SAFE REBOOT!
=============================================
=============================================
Your installation has already cleaned up after
itself if you see the install.bat/install.sh exit.
=============================================
=============================================
Installation finished. Enjoy the recoveries!
=============================================
Press any key to continue . . .
=============================================
Hi sorry I just want to see if anyone can help me with my z ultra I can't get it to enter recovery with the hardware keys and the rom isn't working correctly so I can't do anything when It turns on all help appreciated
Anyone?
@[NUT], assistance please?
Thanx!
Resolved!
I removed the installation using the guide on the original thread and reinstalled a newly downloaded version (ZU-lockeddualrecovery2.8.8-RELEASE.installer.zip)
Just thought I'd place a feedback here.
Thanks!
Can this be installed on purely stock unrooted firmware? I'm on Lollipop .270.
Sent from my LG-F320L using Tapatalk
Failed install ZU Dual Recovery
Hi... sorry, i want to see if anyone can help me with my Z Ultra C6833 build number 14.4.A.0.108, I am failed install recovery.
Can anyone help me out, until success install Dual Recovery...
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
error: protocol fault (status read)
Device found!
=============================================
Getting ro.build.product
=============================================
error: more than one device and emulator
Device model is
error: more than one device and emulator
Firmware is
=============================================
Step2 : Sending the recovery files.
=============================================
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
=============================================
Step3 : Setup of dual recovery.
=============================================
error: more than one device and emulator
error: more than one device and emulator
Look at your device and grant supersu access!
Press any key to continue AFTER granting root access.
error: more than one device and emulator
Press any key to continue . . .
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
=============================================
Installation FAILED!
Please copy and paste the contents of this
window to the DevDB thread for troubleshooting!
=============================================
Press any key to continue . . .
Hello I'm using a Xperia z ultra c6833 running stock lollipop 5.2 I have done nothing on it i dont have root my bootloader is locked keep in mind that lollipop has some problems I want to install a coustem rom can I use this method is there any other way please help me I'm losing hop please help
---------- Post added at 12:35 PM ---------- Previous post was at 12:14 PM ----------
Hello I'm using a Xperia z ultra c6833 running stock sony lollipop 5.0.2 I don't have root access and my bootloader is locked since lollipop has problems and it's really hard to get a coustem recovery in my situation can I use this method is there any other way I'm losing hop can any one please help
Hello, I have earlier installed Google Indic Keyboard app in My Phone Iqoo z3, But after some update it automatically disappeared. I tried to install it from Play Store but installation always failed. Then I Tried Downloading and Install with apk file. That also did not work.
Then I tried to install with ADB tools. There also I Have got error. The app is very important for me,
Code:
PS C:\Users\mkj\Downloads\platform-tools_r31.0.3-windows\platform-tools> adb install hindi.apk
2470 KB/s (35316074 bytes in 13.957s)
Failure [INSTALL_PARSE_FAILED_MANIFEST_MALFORMED: Failed parse during installPackageLI: /data/app/vmdl1755875328.tmp/base.apk (at Binary XML file line #33): com.google.android.apps.inputmethod.hindi.HindiInputMethodService: Targeting S+ (version 31 and above) requires that an explicit value for android:exported be defined when intent filters are present]
I am not much familiar with android Errors. can some one tell me whats wrong With it??
My device is Iqoo Z3