Hi all this is my first post here.
I flashed the CM10.2 by munjeni but i forgot to format /system
Now my Sola doesn't even start, when i try starting it vibrates and nothing happens
If i charge it and try to start it vibrates, the red led lights for a second and then.. nothing
My PC doesn't recognize it and if i try to fastboot or flash the purple/green led lights fot three seconds and then turns off and flashtool doesn't see the device
PLEASE HELP!!!!!!
ametyst said:
Hi all this is my first post here.
I flashed the CM10.2 by munjeni but i forgot to format /system
Now my Sola doesn't even start, when i try starting it vibrates and nothing happens
If i charge it and try to start it vibrates, the red led lights for a second and then.. nothing
My PC doesn't recognize it and if i try to fastboot or flash the purple/green led lights fot three seconds and then turns off and flashtool doesn't see the device
PLEASE HELP!!!!!!
Click to expand...
Click to collapse
Is your bootloader unlocked?
Make sure it's turned off by pressing power + volume up until you feel 1 + 3 vibrations before attempting fastboot or flash mode.
ChikeD said:
Is your bootloader unlocked?
Make sure it's turned off by pressing power + volume up until you feel 1 + 3 vibrations before attempting fastboot or flash mode.
Click to expand...
Click to collapse
Yes, it's unlocked
Yes, I tried
Please someone help!!!!
Could you connect fastboot/flash mode on the PC you are using now before it happen?
Ok, here it goes...
You know? The same exact thing happened to me, I'll tell you the solution. (yeah, sound like a TV commercial)
Power off the phone by pressing and holding the Power and Volume up buttons, when it vibrates three times release.
Now you have to turn it on in fastboot mode, connect the phone to the computer, press the power and vol up buttons, after two seconds release the power button and you have the blue led, always hold the up button.
Now at this time you need to be fast as ****, because you need to flash the boot.iso kernel in the .zip, if your phone is recognized by flashtool, obviously.
When you have the kernel flashed then reboot the phone and hold the vol up button when the led of many colors blinks, and hell yeah, we are on CWM. At this step, you have to do the same procedure as you did, but be careful this time. If something happens just tell me.
Don't forget to format the system.
---------- Post added at 04:32 PM ---------- Previous post was at 04:31 PM ----------
Just a fact, there's a lot, but a LOT of threads that are made because of the munjeni's ROM, if you have a doubt, search first, then post.
manudo said:
Ok, here it goes...
You know? The same exact thing happened to me, I'll tell you the solution. (yeah, sound like a TV commercial)
Power off the phone by pressing and holding the Power and Volume up buttons, when it vibrates three times release.
Now you have to turn it on in fastboot mode, connect the phone to the computer, press the power and vol up buttons, after two seconds release the power button and you have the blue led, always hold the up button.
Now at this time you need to be fast as ****, because you need to flash the boot.iso kernel in the .zip, if your phone is recognized by flashtool, obviously.
When you have the kernel flashed then reboot the phone and hold the vol up button when the led of many colors blinks, and hell yeah, we are on CWM. At this step, you have to do the same procedure as you did, but be careful this time. If something happens just tell me.
Don't forget to format the system.
---------- Post added at 04:32 PM ---------- Previous post was at 04:31 PM ----------
Just a fact, there's a lot, but a LOT of threads that are made because of the munjeni's ROM, if you have a doubt, search first, then post.
Click to expand...
Click to collapse
Flashtool says "ERROR - This action can only be done in fastboot mode"
My PC doesn't recognise the phone
Please help
ametyst said:
Flashtool says "ERROR - This action can only be done in fastboot mode"
My PC doesn't recognise the phone
Please help
Click to expand...
Click to collapse
Press volume up + USB to PC that should go into fastboot mode
Sent From My Xperia U With An Ultimate XNovaThor Rom
dara007_168 said:
Press volume up + USB to PC that should go into fastboot mode
Sent From My Xperia U With An Ultimate XNovaThor Rom
Click to expand...
Click to collapse
It doesn't stay in fastboot mode. Purple light is on for like 2 or 3 seconds and then it turns off and my pc doesn't recognize the device!!!
All driver installed!!
ametyst said:
It doesn't stay in fastboot mode. Purple light is on for like 2 or 3 seconds and then it turns off and my pc doesn't recognize the device!!!
All driver installed!!
Click to expand...
Click to collapse
U mean Blue light? Pc doesn't recognize doesn't mean that driver problem maybe change usb and try again
Sent From My Xperia U With An Ultimate XNovaThor Rom
ametyst said:
It doesn't stay in fastboot mode. Purple light is on for like 2 or 3 seconds and then it turns off and my pc doesn't recognize the device!!!
All driver installed!!
Click to expand...
Click to collapse
Read my post dude, connect the USB cable, hold power and vol up buttons and two seconds later release power button and continue holding up.
In that time you should flash the boot.iso, but quick.
which os you are using in your pc ?
Solved
Thank you all guys, I think it was a driver problem.
I was using a Pc OS Windows 8, and it didn't recognize the phone.
I tried with a Win 7 PC, installed driver and everything, and i succeded to flash the boot.img
ametyst said:
Thank you all guys, I think it was a driver problem.
I was using a Pc OS Windows 8, and it didn't recognize the phone.
I tried with a Win 7 PC, installed driver and everything, and i succeded to flash the boot.img
Click to expand...
Click to collapse
You can flash from Windows 8 too, just you have to read this guide. http://forum.xda-developers.com/showthread.php?t=2447283
But, ok, you flashed it, great.
More specificly, I used to have Win 8.1
Now, for other causes I'm back to Win 8 and from here i can flash perfectly
I'm writing this for someone else who may have the same issue
:good:
Related
Xperia S Issues. Bad Flash
Hi, I read the 'existing users' installation instructions on the Sspeed ICS rom and installed the rom without installing the ics rom and kernel (I was tired). When booting, I go in a bootloop with the doomkernel screen. I can access recovery fine.
When holding vol+ and connecting to PC the phone goes back into it's bootloop and does not boot into fastboot.
When holding vol- and connecting to PC the phone flashes the green led and then boots into bootloop.
If I wait until the phone vibrates and lights up blue I can press the button to access recovery. I thought I could then just copy a gb rom over using USB mount but it is not detected on the PC.
Any help would be greatly appreciated.
Thank you
Try flashing stock ICS rom with flashtool
Sent from my LT26i using xda app-developers app
arc_u said:
Try flashing stock ICS rom with flashtool
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Thanks but like I say fast boot and flashmode don't work so I can't access this option
I have the same problem too... I was hoping it would just work, but apparently it doesn't it needs a base rom.....I'm at work at the moment so i cannot fix my phone(i flashed it while at work which i shouldn't have done...) i noticed you can put it into fast boot in recovery - go to reboot options then fast boot can you see if that works
arc_u said:
Try flashing stock ICS rom with flashtool
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
unrealboot1 said:
I have the same problem too... I was hoping it would just work, but apparently it doesn't it needs a base rom.....I'm at work at the moment so i cannot fix my phone(i flashed it while at work which i shouldn't have done...) i noticed you can put it into fast boot in recovery - go to reboot options then fast boot can you see if that works
Click to expand...
Click to collapse
Hi thanks for your reply. I've tried going to fastboot
from recovery and I get a blue flashing light for one flash then it boots up again. Am I able to do anything at that point?
Glad I'm not the only stupid one on here
im not the expert here but I have bricked other phones before but never an xperia phone before. I have been reading up, the doom kernel has some mounting options, try to mount the sd card as mass storage so pc can send files accross to the phone. It should be mount and storage menu -> mount usb storage, then leave it on that menu and connect to computer, see if that works
unrealboot1 said:
im not the expert here but I have bricked other phones before but never an experia phone before. I have been reading up, the doom kernel has some mounting options, try to mount the sd card as mass storage so pc can send files accross to the phone.
Click to expand...
Click to collapse
Hi is this by the mount USB storage optuon ? I tried that and it wasn't detected on the PC. I could try another PC later. Recovery went into mount mode fine but nothing happened on the PC. Not even a blank drive which I know some people have had
If it blinks the LED for a second and reboots, that means that you don't have the drivers. Install drivers that are bundled with flashtool and try again. Or use Linux / OSX.
K900 said:
If it blinks the LED for a second and reboots, that means that you don't have the drivers. Install drivers that are bundled with flashtool and try again. Or use Linux / OSX.
Click to expand...
Click to collapse
I've used the laptop I'm trying it on for unlocking the boot loader and rooting. Maybe something corrupted the drivers. Will try on my Linux machine when I get home.
Thank you for all the help so far
Just Press VolUp and Power button until you get (one vibration followed by 3 consecutive vibrations) ... it will mean phone is shutdown.
Once shutted down, you will be able to press VolDown while plugging phone to PC and it will enter into flashmode.
Then you will be able to flash a FTF using flashtool
doesn't work...after the 3 beeps i let go and the screen turns black but then the boot loop happens again, i cant turn the phone off
Androxyde said:
Just Press VolUp and Power button until you get (one vibration followed by 3 consecutive vibrations) ... it will mean phone is shutdown.
Once shutted down, you will be able to press VolDown while plugging phone to PC and it will enter into flashmode.
Then you will be able to flash a FTF using flashtool
Click to expand...
Click to collapse
Hi, I do get the 3 vibrates and the phone stays off but instill got the individual quick flash then boot up.
Apologies mine stays off too, i just had it on charger so it turns on again after the 3 beeps, once off the charger it will turn off....I will be trying stuff when i get home.
Androxyde said:
Just Press VolUp and Power button until you get (one vibration followed by 3 consecutive vibrations) ... it will mean phone is shutdown.
Once shutted down, you will be able to press VolDown while plugging phone to PC and it will enter into flashmode.
Then you will be able to flash a FTF using flashtool
Click to expand...
Click to collapse
This will work, cause I had a similar issue a while ago
Good luck
depulle87 said:
This will work, cause I had a similar issue a while ago
Good luck
Click to expand...
Click to collapse
correct
Hello. I've got familiar problem. My phone blacked out after one day having about 35 % battery full. I was trying to reset it by holding power and volume up buttons - nothing happened. Just once showed up Sony logo but then again black nothing. Then it vibrate 3 times quickly and from that time it is shutted down, won't turn on even in flashmode. LED is not working too. I was asking for advice in local store servise and guy told me, that new phones have to be at least 30 min on the charger. So it's here now for hour, no result. :/
Just fixed this issue.
Follow these steps
1.hold vol up + power until phone vibrates 3 times.
2.open flash tool and point towards your stock file.
3.hit okay
4.wait for flash tool to prepare the files then it will prompt you to connect device in flash mode( vol down + power)
5.wait for it to finish. Unplug reboot and there you go fixed...
Hope this helps
Sent from my LT26i using Tapatalk 2
Cant do that, because PC dont recognize the phone. Phone has just red LED, thats all.
Alikalix said:
Cant do that, because PC dont recognize the phone. Phone has just red LED, thats all.
Click to expand...
Click to collapse
Use the bundled wallcharger!!! not a PC, pc has too less power to charge it now!
After wallcharger is placed hold vol+ and power for a few seconds until 3 vibrations, then let the phone on charger for atleast 2 hours, if all is good phone will bootup to the "charging animation"
Regards
Bin4ry said:
Use the bundled wallcharger!!! not a PC, pc has too less power to charge it now!
After wallcharger is placed hold vol+ and power for a few seconds until 3 vibrations, then let the phone on charger for atleast 2 hours, if all is good phone will bootup to the "charging animation"
Regards
Click to expand...
Click to collapse
Something similar happened to me. I have the bugged version of chargemon (only can charge with phone on) and accidentally discharged completely. The phone didn't boot, didn't charge and didn't do the 3 vibrations thing. So I put the battery off, conected the wall charger, putted the battery and it booted
It's really easy to remove the battery, you just need to be careful
The thing is my Xperia Go is stuck at bootloop and i cant access anything.. no CWM, no entering fastboot and computer doesnt seem to recognize it at all. It only goes up to SONY logo, stays there a while and then blanks the screen just to do it all over again.
It started when i flashed my phone with new kernel.
Any ideas of what should i do now?
All help will be appreciated im new to this.
Install Flashtool, then go the drivers folder in Flashtool, and install your drivers (Including the Fastboot & Flashmode drivers)
Then, turn off your phone. Select the Stock FTF from Flashtool and click Flash
Then, when it asks you connect the phone, Holding Down the Volume Down Key, connect the usb cable to phone (It should already have been connected to pc before connecting to phone)
Wait 2 seconds and a green light comes on.. Then wait a few minutes and your phone will be back to normal
Min3r said:
Install Flashtool, then go the drivers folder in Flashtool, and install your drivers (Including the Fastboot & Flashmode drivers)
Then, turn off your phone. Select the Stock FTF from Flashtool and click Flash
Then, when it asks you connect the phone, Holding Down the Volume Down Key, connect the usb cable to phone (It should already have been connected to pc before connecting to phone)
Wait 2 seconds and a green light comes on.. Then wait a few minutes and your phone will be back to normal
Click to expand...
Click to collapse
I have done all that and did it again just to be sure.. atfer green light comes on it changes to red in few sec and my phone shows SONY for 1/4 min and then shuts off while charging. i have tried to enter fastboot mode too but the same thing happens.. correct led colour few secs and then logo and off.
This seems like a hardbrick although flashing a custom kernel shouldnt have caused that issue.. Did you do the cable connecting in the exact order I said ? You might have missed that ,with any luck
Dun worry
Remove the battery if possible
If not
Switch of the phone by pressing volume us plus power key simultaneously for few seconds
Then flash official ftf via flashtool
---------- Post added at 09:55 AM ---------- Previous post was at 09:54 AM ----------
vikativehkleja said:
I have done all that and did it again just to be sure.. atfer green light comes on it changes to red in few sec and my phone shows SONY for 1/4 min and then shuts off while charging. i have tried to enter fastboot mode too but the same thing happens.. correct led colour few secs and then logo and off.
Click to expand...
Click to collapse
Its because u r not connecting it properly
While connecting keep only the volume down button pressed ( dun press the power key along to enter flashmode)
And its not a hard brick so dun worry
Just a bad kernel
drsanket_xperia_u said:
Dun worry
Remove the battery if possible
If not
Switch of the phone by pressing volume us plus power key simultaneously for few seconds
Then flash official ftf via flashtool
---------- Post added at 09:55 AM ---------- Previous post was at 09:54 AM ----------
Its because u r not connecting it properly
While connecting keep only the volume down button pressed ( dun press the power key along to enter flashmode)
And its not a hard brick so dun worry
Just a bad kernel
Click to expand...
Click to collapse
This is weird and awkward.. when i started my computer today, read this and redid all the steps i got it to flash and it WORKS!
This incident has made me even more interested.
Thanks to BOTH of you for taking the time to answer, i know it was a stupid question to begin with.
vikativehkleja said:
This is weird and awkward.. when i started my computer today, read this and redid all the steps i got it to flash and it WORKS!
This incident has made me even more interested.
Thanks to BOTH of you for taking the time to answer, i know it was a stupid question to begin with.
Click to expand...
Click to collapse
Anytime buddy
my xperia u is bricked and bootloader unlocked, when i tried to flash stock rom it went wrong, i cant get into fastboot ir flashmode anymore,
only red led from charger appears, anyone knows what to do?
could i throw it at an DOA since i recieved it yesterday? so they wont charge me?
Regards, Sidle
It's hard to brick your phone in a way that you can not flash stock ROM in Flashtool.
Follow the instructions and everything should be fine.
ljubanve said:
It's hard to brick your phone in a way that you can not flash stock ROM in Flashtool.
Follow the instructions and everything should be fine.
Click to expand...
Click to collapse
i can't get into fastboot or flashmode neither does the sony logo come up
sidle said:
i can't get into fastboot or flashmode neither does the sony logo come up
Click to expand...
Click to collapse
Turn off the phone by holding the power+vol up and vol down button together until vibrate 3 times....
Then flashmode the phone to flash stock ftf
Sent from my xperia sola using xda premium
I can't easily find instructions to paste it here because I'm typing from tapatalk.
But, you need to open Flashtool and click on flash icon. Then, you should choose Flashmode and select the ROM you want to flash. After that, when flashing is started, Flashtool will prompt you to connect your phone. You should do that like this:
Turn your phone down.
Connect USB cable to PC.
Hold volume down and then connect cable to phone.
Green LED should turn on and flashing will resume.
MUHAMMAD KHALIL said:
Turn off the phone by holding the power+vol up and vol down button together until vibrate 3 times....
Then flashmode the phone to flash stock ftf
Sent from my xperia sola using xda premium
Click to expand...
Click to collapse
how long is that supossed to take, i cant seem to get it vibrate, red light only shows when charger is plugged
appears to be pressing 3 buttons simoultaniously will give me a blue ullumination bar,
so fastboot does work, flashmode doesnt?
sidle said:
how long is that supossed to take, i cant seem to get it vibrate, red light only shows when charger is plugged
Click to expand...
Click to collapse
Do it carefully mate,
(hold the power button,vol up,voldown altogether until it vibrate 3 times) it will shut down the phone
Sent from my xperia sola using xda premium
MUHAMMAD KHALIL said:
Do it carefully mate,
(hold the power button,vol up,voldown altogether until it vibrate 3 times) it will shut down the phone
Sent from my xperia sola using xda premium
Click to expand...
Click to collapse
not getting three vibrations, only blue ullimination bar for like 3 seconds
just from curiousity could i still throw this on DOA?
sidle said:
not getting three vibrations, only blue ullimination bar for like 3 seconds
just from curiousity could i still throw this on DOA?
Click to expand...
Click to collapse
Now try to another way
Hold power button+vol up together until 3 vibration...
Sent from my xperia sola using xda premium
sidle said:
not getting three vibrations, only blue ullimination bar for like 3 seconds
just from curiousity could i still throw this on DOA?
Click to expand...
Click to collapse
Just remove ur battery n reinsert it
And retry getting into flashmode or fastboot
drsanket_xperia_u said:
Just remove ur battery n reinsert it
And retry getting into flashmode or fastboot
Click to expand...
Click to collapse
i achieved getting into fastboot, flashmode seems to be broken, now what to do next
can I still throw this on a Death on Arrival, will they notice, i got my phone yesterday.
They will easily know u unlocked bootloader
U have a ics ftf file???
---------- Post added at 07:39 PM ---------- Previous post was at 07:38 PM ----------
If yes
Then open ftf through winrar
Extract kernel.sin
And flash that kernel sin through fastboot using flashtool
drsanket_xperia_u said:
They will easily know u unlocked bootloader
U have a ics ftf file???
---------- Post added at 07:39 PM ---------- Previous post was at 07:38 PM ----------
If yes
Then open ftf through winrar
Extract kernel.sin
And flash that kernel sin through fastboot using flashtool
Click to expand...
Click to collapse
trying that in a minute
sidle said:
trying that in a minute
Click to expand...
Click to collapse
From looking at what you have gone through, i think its a corrupted kernel. If you can get into fast boot, try flashing another kernel.
mjathu said:
From looking at what you have gone through, i think its a corrupted kernel. If you can get into fast boot, try flashing another kernel.
Click to expand...
Click to collapse
hmm i could get into fastboot by pressing up+down volume and power button, stopped working, what now?
sidle said:
hmm i could get into fastboot by pressing up+down volume and power button, stopped working, what now?
Click to expand...
Click to collapse
Are u properly connecting into fastboot mode??
The proper way of getting into flashmode is switching off ur cell
Pressing volume down keep it pressed and then connecting usb (make sure flashtool is opened)
Similarly for fastboot mode is volume up pressed while connecting to pc
drsanket_xperia_u said:
Are u properly connecting into fastboot mode??
The proper way of getting into flashmode is switching off ur cell
Pressing volume down keep it pressed and then connecting usb (make sure flashtool is opened)
Similarly for fastboot mode is volume up pressed while connecting to pc
Click to expand...
Click to collapse
when i just tried to charge it all of the sudden green ambilight came up and flashtool said it was connected in flashmode,
within three seconds fun was over again.
sidle said:
when i just tried to charge it all of the sudden green ambilight came up and flashtool said it was connected in flashmode,
within three seconds fun was over again.
Click to expand...
Click to collapse
U r not connecting it properly
Before u connect make sure u have flashtool running
Secondly reinstall drivers for flashmode n fastboot
Well i read some advice about leaving your battery out for a few minutes and then plug in the charger, let it charge for a few hours and try again.
Can you confirm this works or has even potential of working
drsanket_xperia_u said:
U r not connecting it properly
Before u connect make sure u have flashtool running
Secondly reinstall drivers for flashmode n fastboot
Click to expand...
Click to collapse
I wasn't even pushing any buttons just plugged in charger and after 5 seconds it went green, btw last night my drivers were fine.
My phone is bricked and even if i want to flash a ftf at flashtool it doesn't sees my phone :crying::crying: When i connect the wall charger sony logo comes and red led lights then everything closes. And when i hold volume up+power phone vibrates first once then three times. please help
VOL UP+POWER =3 VIBRATION, mean you turn off the phone. No problem.
Step by step.
Turn off the phone. hold volume - and conect to computer. The led turn green?
The same, but with volume+ ¿the led turn blue?
Is very dificult brick totally the phone, we will unbrick, dont worry.
Flamenawer said:
VOL UP+POWER =3 VIBRATION, mean you turn off the phone. No problem.
Step by step.
Turn off the phone. hold volume - and conect to computer. The led turn green?
The same, but with volume+ ¿the led turn blue?
Is very dificult brick totally the phone, we will unbrick, dont worry.
Click to expand...
Click to collapse
Yes if i hold vol up+power blue led comes and if i vol down+power green light comes. At flashtool i selected fastboot and selected flash kernel and flashed recovery.img as kernel. and that happened. i think thats the problem but is there a way to fix it?
Yes!!!!!! You're doing it totally wrong.
Recovery must be sideloaded via adb shell.
You'll need to flash your firmware and then follow the right steps to sideload a new recovery.
Enviado desde mi E2306 mediante Tapatalk
To unbrick you phone the only needed is flash your stock rom,excluding all minus the kernel. This will work and you hold your recovery with the phone working and you will can flash the root zip.
Flamenawer said:
To unbrick you phone the only needed is flash your stock rom,excluding all minus the kernel. This will work and you hold your recovery with the phone working and you will can flash the root zip.
Click to expand...
Click to collapse
But the problem is flashtool doesnt't recognize my phone now. if i can solve this i can open my phone again but how?
Please try put here the log. Uninstall flashtool 9.19,is buged, and install 9.18 and try again. Flashmode and check all except kernel
Flamenawer said:
Please try put here the log. Uninstall flashtool 9.19,is buged, and install 9.18 and try again. Flashmode and check all except kernel
Click to expand...
Click to collapse
i installed 9.18. i connected the phone to the pc when i connect phone to pc the led become green. and i opened the flashtool. in the log it says device connected in flash mode. but when i click the bolt and select the flashmode my device doesnt appears there. and after a while it says device disconnected
vurucumiller said:
i installed 9.18. i connected the phone to the pc when i connect phone to pc the led become green. and i opened the flashtool. in the log it says device connected in flash mode. but when i click the bolt and select the flashmode my device doesnt appears there. and after a while it says device disconnected
Click to expand...
Click to collapse
Change the order, first run flashtool,flashmode,selec the rom,check all except kernel,wait,after flastool say you connect the phone.
Turn the phone off with volume up + power until vibrate 3 times. push and hold volume- and connect the usb to the computer, the flash will start.
Flamenawer said:
Change the order, first run flashtool,flashmode,selec the rom,check all except kernel,wait,after flastool say you connect the phone.
Turn the phone off with volume up + power until vibrate 3 times. push and hold volume- and connect the usb to the computer, the flash will start.
Click to expand...
Click to collapse
Thank ill try when downloaded the ftf
Flamenawer said:
Change the order, first run flashtool,flashmode,selec the rom,check all except kernel,wait,after flastool say you connect the phone.
Turn the phone off with volume up + power until vibrate 3 times. push and hold volume- and connect the usb to the computer, the flash will start.
Click to expand...
Click to collapse
It worked so much thanks you are my lifesaver :good::good:
Im happy for help you, I will have a good day for this. Enjoy
Dont mind me
I need 10 posts to post a picture
i know i'm probably late but when I boot into flashmode and the green light comes on, after a bit it disconnects from my pc and then reconnects, interrupting the process, can anyone help?
JakeMini123 said:
i know i'm probably late but when I boot into flashmode and the green light comes on, after a bit it disconnects from my pc and then reconnects, interrupting the process, can anyone help?
Click to expand...
Click to collapse
Interupting the process? Same hapened to me. Be sure to connect your phone only when everything is ready, so when the flashtool asks you to connect your phone, and not before. Worked for me.
ekin_strops said:
Interupting the process? Same hapened to me. Be sure to connect your phone only when everything is ready, so when the flashtool asks you to connect your phone, and not before. Worked for me.
Click to expand...
Click to collapse
I do connect the phone when everything is ready and flash tool tells me to connect flash tool in flash mode, but it's like a bomb, the green light stays green for about 10 seconds, goes back to red then in 2 seconds back to green so i can never flash anything in time, please help
JakeMini123 said:
I do connect the phone when everything is ready and flash tool tells me to connect flash tool in flash mode, but it's like a bomb, the green light stays green for about 10 seconds, goes back to red then in 2 seconds back to green so i can never flash anything in time, please help
Click to expand...
Click to collapse
It could be also your drivers. Which windows do you have?
What should i do of it goes into the select language part but when i try to select anything it doesn't respond and just restarts again and again. Even if i tried rebooting through twrp it's still the same
Please help.
ekin_strops said:
It could be also your drivers. Which windows do you have?
Click to expand...
Click to collapse
Windows 7 but all the drivers are installled and working fine from the last time I plugged in my xperia.
JakeMini123 said:
Windows 7 but all the drivers are installled and working fine from the last time I plugged in my xperia.
Click to expand...
Click to collapse
Pluged in like file transfer or like flashmode and fastboot mode?
So I think I bricked my phone ya all. I used the one click root after I unlocked boot loader and everything worked fine until I had to reboot my phone. All of a sudden the nfc has crashed pop up made my phone inoperable. I booted into twrp with the intention to wipe cache. After I did that the phone stopped booting all together.
I tried putting the phone in fast pot mode and the blue led displays but it's not being recognized by the pc. I downloaded flash tool hoping I can flash a stock image back but same issues. If I press volume down the led turns green and for a few seconds flash tool will recognize the phone.
Does anyone have any ideas? Phone now turns on but won't go past the splash screen where Sony logo is displayed.
If flash tool recognizes phone and there is light game is not lost. I would call this semi-brick. Did you flash all? Maybe you just need to try again.
orbphobic1 said:
So I think I bricked my phone ya all. I used the one click root after I unlocked boot loader and everything worked fine until I had to reboot my phone. All of a sudden the nfc has crashed pop up made my phone inoperable. I booted into twrp with the intention to wipe cache. After I did that the phone stopped booting all together.
I tried putting the phone in fast pot mode and the blue led displays but it's not being recognized by the pc. I downloaded flash tool hoping I can flash a stock image back but same issues. If I press volume down the led turns green and for a few seconds flash tool will recognize the phone.
Does anyone have any ideas? Phone now turns on but won't go past the splash screen where Sony logo is displayed.
Click to expand...
Click to collapse
Select firmware on flashtool and prepare ot for flashing. When flashtool prompts you to connect your phone, do it then. That way it will stay on flashmode
Sadman Khan said:
Select firmware on flashtool and prepare ot for flashing. When flashtool prompts you to connect your phone, do it then. That way it will stay on flashmode
Click to expand...
Click to collapse
The thing is when I put the phone in fastboot mode it does not vibrate like it used to. Right now the led just turns blue and nothing happens. Flashtool won't even recognize the phone when its in this state. If I disconnect from cable and press the volume down key the led turns green and for a few seconds flashtool will identify the phone but then it stops...
Flashmode is when you use volume down. When flashtool prompts you to connect the phone, only then press and hold volume down button while connecting. The flashing will begin immediately.
---------- Post added at 08:25 PM ---------- Previous post was at 08:22 PM ----------
Fastboot is volume up. That's just for flashing kernels usually. For flashing ftfs use flashmode which is accessed using volume down. First go to flashtool, click on the flash icon, click on flashmode, select the firmware and click flash. Then wait. When flashtool tells prompts you to connect, only then do so. Also, use the latest flashtool and the latest drivers
Sadman Khan said:
Flashmode is when you use volume down. When flashtool prompts you to connect the phone, only then press and hold volume down button while connecting. The flashing will begin immediately.
---------- Post added at 08:25 PM ---------- Previous post was at 08:22 PM ----------
Fastboot is volume up. That's just for flashing kernels usually. For flashing ftfs use flashmode which is accessed using volume down. First go to flashtool, click on the flash icon, click on flashmode, select the firmware and click flash. Then wait. When flashtool tells prompts you to connect, only then do so. Also, use the lastest flashtool and the latest drivers
Click to expand...
Click to collapse
Sadman thank you. That worked.
orbphobic1 said:
Sadman thank you. That worked.
Click to expand...
Click to collapse
Glad to help