my xperia u is bricked and bootloader unlocked, when i tried to flash stock rom it went wrong, i cant get into fastboot ir flashmode anymore,
only red led from charger appears, anyone knows what to do?
could i throw it at an DOA since i recieved it yesterday? so they wont charge me?
Regards, Sidle
It's hard to brick your phone in a way that you can not flash stock ROM in Flashtool.
Follow the instructions and everything should be fine.
ljubanve said:
It's hard to brick your phone in a way that you can not flash stock ROM in Flashtool.
Follow the instructions and everything should be fine.
Click to expand...
Click to collapse
i can't get into fastboot or flashmode neither does the sony logo come up
sidle said:
i can't get into fastboot or flashmode neither does the sony logo come up
Click to expand...
Click to collapse
Turn off the phone by holding the power+vol up and vol down button together until vibrate 3 times....
Then flashmode the phone to flash stock ftf
Sent from my xperia sola using xda premium
I can't easily find instructions to paste it here because I'm typing from tapatalk.
But, you need to open Flashtool and click on flash icon. Then, you should choose Flashmode and select the ROM you want to flash. After that, when flashing is started, Flashtool will prompt you to connect your phone. You should do that like this:
Turn your phone down.
Connect USB cable to PC.
Hold volume down and then connect cable to phone.
Green LED should turn on and flashing will resume.
MUHAMMAD KHALIL said:
Turn off the phone by holding the power+vol up and vol down button together until vibrate 3 times....
Then flashmode the phone to flash stock ftf
Sent from my xperia sola using xda premium
Click to expand...
Click to collapse
how long is that supossed to take, i cant seem to get it vibrate, red light only shows when charger is plugged
appears to be pressing 3 buttons simoultaniously will give me a blue ullumination bar,
so fastboot does work, flashmode doesnt?
sidle said:
how long is that supossed to take, i cant seem to get it vibrate, red light only shows when charger is plugged
Click to expand...
Click to collapse
Do it carefully mate,
(hold the power button,vol up,voldown altogether until it vibrate 3 times) it will shut down the phone
Sent from my xperia sola using xda premium
MUHAMMAD KHALIL said:
Do it carefully mate,
(hold the power button,vol up,voldown altogether until it vibrate 3 times) it will shut down the phone
Sent from my xperia sola using xda premium
Click to expand...
Click to collapse
not getting three vibrations, only blue ullimination bar for like 3 seconds
just from curiousity could i still throw this on DOA?
sidle said:
not getting three vibrations, only blue ullimination bar for like 3 seconds
just from curiousity could i still throw this on DOA?
Click to expand...
Click to collapse
Now try to another way
Hold power button+vol up together until 3 vibration...
Sent from my xperia sola using xda premium
sidle said:
not getting three vibrations, only blue ullimination bar for like 3 seconds
just from curiousity could i still throw this on DOA?
Click to expand...
Click to collapse
Just remove ur battery n reinsert it
And retry getting into flashmode or fastboot
drsanket_xperia_u said:
Just remove ur battery n reinsert it
And retry getting into flashmode or fastboot
Click to expand...
Click to collapse
i achieved getting into fastboot, flashmode seems to be broken, now what to do next
can I still throw this on a Death on Arrival, will they notice, i got my phone yesterday.
They will easily know u unlocked bootloader
U have a ics ftf file???
---------- Post added at 07:39 PM ---------- Previous post was at 07:38 PM ----------
If yes
Then open ftf through winrar
Extract kernel.sin
And flash that kernel sin through fastboot using flashtool
drsanket_xperia_u said:
They will easily know u unlocked bootloader
U have a ics ftf file???
---------- Post added at 07:39 PM ---------- Previous post was at 07:38 PM ----------
If yes
Then open ftf through winrar
Extract kernel.sin
And flash that kernel sin through fastboot using flashtool
Click to expand...
Click to collapse
trying that in a minute
sidle said:
trying that in a minute
Click to expand...
Click to collapse
From looking at what you have gone through, i think its a corrupted kernel. If you can get into fast boot, try flashing another kernel.
mjathu said:
From looking at what you have gone through, i think its a corrupted kernel. If you can get into fast boot, try flashing another kernel.
Click to expand...
Click to collapse
hmm i could get into fastboot by pressing up+down volume and power button, stopped working, what now?
sidle said:
hmm i could get into fastboot by pressing up+down volume and power button, stopped working, what now?
Click to expand...
Click to collapse
Are u properly connecting into fastboot mode??
The proper way of getting into flashmode is switching off ur cell
Pressing volume down keep it pressed and then connecting usb (make sure flashtool is opened)
Similarly for fastboot mode is volume up pressed while connecting to pc
drsanket_xperia_u said:
Are u properly connecting into fastboot mode??
The proper way of getting into flashmode is switching off ur cell
Pressing volume down keep it pressed and then connecting usb (make sure flashtool is opened)
Similarly for fastboot mode is volume up pressed while connecting to pc
Click to expand...
Click to collapse
when i just tried to charge it all of the sudden green ambilight came up and flashtool said it was connected in flashmode,
within three seconds fun was over again.
sidle said:
when i just tried to charge it all of the sudden green ambilight came up and flashtool said it was connected in flashmode,
within three seconds fun was over again.
Click to expand...
Click to collapse
U r not connecting it properly
Before u connect make sure u have flashtool running
Secondly reinstall drivers for flashmode n fastboot
Well i read some advice about leaving your battery out for a few minutes and then plug in the charger, let it charge for a few hours and try again.
Can you confirm this works or has even potential of working
drsanket_xperia_u said:
U r not connecting it properly
Before u connect make sure u have flashtool running
Secondly reinstall drivers for flashmode n fastboot
Click to expand...
Click to collapse
I wasn't even pushing any buttons just plugged in charger and after 5 seconds it went green, btw last night my drivers were fine.
Related
The thing is my Xperia Go is stuck at bootloop and i cant access anything.. no CWM, no entering fastboot and computer doesnt seem to recognize it at all. It only goes up to SONY logo, stays there a while and then blanks the screen just to do it all over again.
It started when i flashed my phone with new kernel.
Any ideas of what should i do now?
All help will be appreciated im new to this.
Install Flashtool, then go the drivers folder in Flashtool, and install your drivers (Including the Fastboot & Flashmode drivers)
Then, turn off your phone. Select the Stock FTF from Flashtool and click Flash
Then, when it asks you connect the phone, Holding Down the Volume Down Key, connect the usb cable to phone (It should already have been connected to pc before connecting to phone)
Wait 2 seconds and a green light comes on.. Then wait a few minutes and your phone will be back to normal
Min3r said:
Install Flashtool, then go the drivers folder in Flashtool, and install your drivers (Including the Fastboot & Flashmode drivers)
Then, turn off your phone. Select the Stock FTF from Flashtool and click Flash
Then, when it asks you connect the phone, Holding Down the Volume Down Key, connect the usb cable to phone (It should already have been connected to pc before connecting to phone)
Wait 2 seconds and a green light comes on.. Then wait a few minutes and your phone will be back to normal
Click to expand...
Click to collapse
I have done all that and did it again just to be sure.. atfer green light comes on it changes to red in few sec and my phone shows SONY for 1/4 min and then shuts off while charging. i have tried to enter fastboot mode too but the same thing happens.. correct led colour few secs and then logo and off.
This seems like a hardbrick although flashing a custom kernel shouldnt have caused that issue.. Did you do the cable connecting in the exact order I said ? You might have missed that ,with any luck
Dun worry
Remove the battery if possible
If not
Switch of the phone by pressing volume us plus power key simultaneously for few seconds
Then flash official ftf via flashtool
---------- Post added at 09:55 AM ---------- Previous post was at 09:54 AM ----------
vikativehkleja said:
I have done all that and did it again just to be sure.. atfer green light comes on it changes to red in few sec and my phone shows SONY for 1/4 min and then shuts off while charging. i have tried to enter fastboot mode too but the same thing happens.. correct led colour few secs and then logo and off.
Click to expand...
Click to collapse
Its because u r not connecting it properly
While connecting keep only the volume down button pressed ( dun press the power key along to enter flashmode)
And its not a hard brick so dun worry
Just a bad kernel
drsanket_xperia_u said:
Dun worry
Remove the battery if possible
If not
Switch of the phone by pressing volume us plus power key simultaneously for few seconds
Then flash official ftf via flashtool
---------- Post added at 09:55 AM ---------- Previous post was at 09:54 AM ----------
Its because u r not connecting it properly
While connecting keep only the volume down button pressed ( dun press the power key along to enter flashmode)
And its not a hard brick so dun worry
Just a bad kernel
Click to expand...
Click to collapse
This is weird and awkward.. when i started my computer today, read this and redid all the steps i got it to flash and it WORKS!
This incident has made me even more interested.
Thanks to BOTH of you for taking the time to answer, i know it was a stupid question to begin with.
vikativehkleja said:
This is weird and awkward.. when i started my computer today, read this and redid all the steps i got it to flash and it WORKS!
This incident has made me even more interested.
Thanks to BOTH of you for taking the time to answer, i know it was a stupid question to begin with.
Click to expand...
Click to collapse
Anytime buddy
Hello.... I was trying to flash JB ROM in Xperia U...... and when I installed the kernel...........rebooted....It didn't boot.....It vibrates once.....but shows nothing........Not even with volume up buttons.................Please help out...........
swarajsaaj said:
Hello.... I was trying to flash JB ROM in Xperia U...... and when I installed the kernel...........rebooted....It didn't boot.....It vibrates once.....but shows nothing........Not even with volume up buttons.................Please help out...........
Click to expand...
Click to collapse
Force shutdown (Power + VolUP for 10 seconds until vibrating for 3 times) then use fastboot or flashtool to flash its kernel or all.
zhy0919 said:
Force shutdown (Power + VolUP for 10 seconds until vibrating for 3 times) then use fastboot or flashtool to flash its kernel or all.
Click to expand...
Click to collapse
It doesn't boot or vibrate 3 times............ It just vibrates once......and not showing any logo too.............
swarajsaaj said:
Hello.... I was trying to flash JB ROM in Xperia U...... and when I installed the kernel...........rebooted....It didn't boot.....It vibrates once.....but shows nothing........Not even with volume up buttons.................Please help out...........
Click to expand...
Click to collapse
Only flashtool can help you now..
Sent from my ST25i using xda app-developers app
Can anyone please explain how to use flashtool step by step............Too pissed off all this.............
I am afraid the phone on pressing vol up and power shows blue led for some time and then turns off.......nothing on screen..............how I can boot in fastboot or flashtool method..............help...........
swarajsaaj said:
Can anyone please explain how to use flashtool step by step............Too pissed off all this.............
I am afraid the phone on pressing vol up and power shows blue led for some time and then turns off.......nothing on screen..............how I can boot in fastboot or flashtool method..............help...........
Click to expand...
Click to collapse
Blue light means fastboot and green represent flashmode....
Sent from my ST25i using xda app-developers app
swarajsaaj said:
Hello.... I was trying to flash JB ROM in Xperia U...... and when I installed the kernel...........rebooted....It didn't boot.....It vibrates once.....but shows nothing........Not even with volume up buttons.................Please help out...........
Click to expand...
Click to collapse
Please take the time and explain exactly what have you donw before it happen.
What dirmware you had before, what firmware you were trying to flash, and how.
swarajsaaj said:
Hello.... I was trying to flash JB ROM in Xperia U...... and when I installed the kernel...........rebooted....It didn't boot.....It vibrates once.....but shows nothing........Not even with volume up buttons.................Please help out...........
Click to expand...
Click to collapse
dude...y don't u read the instruction carefully.. huh.?
U HAVE FLASHED THE KERNEL ON LOCKED BOOTLOADER.....but it requires unlocked bootloader only....so u have to use flashtool to recover ur device...!
but..don't worry...its just a soft brick..!
regards
kantry123
kantry123 said:
dude...y don't u read the instruction carefully.. huh.?
U HAVE FLASHED THE KERNEL ON LOCKED BOOTLOADER.....but it requires unlocked bootloader only....so u have to use flashtool to recover ur device...!
but..don't worry...its just a soft brick..!
regards
kantry123
Click to expand...
Click to collapse
wasn't aware of bootloader stuff dude.....................................can I knw how can I recover using flash tool.....what kernel and rom again,,,,,??
ChikeD said:
Please take the time and explain exactly what have you donw before it happen.
What dirmware you had before, what firmware you were trying to flash, and how.
Click to expand...
Click to collapse
I had stock ICS first....I installed a memory_tweak which replaced the kernel and that caused the problem ...another cause maybe the phone stuck on AROMA Installer of new JB Rom.....so I had to remove battery in middle of that installer...............That's all I did
If your bootloader is locked just flash any ftf for your device with flashtool
Sent from my 4.2.2 PAC powered Xperia S via Tapatalk
Ben36 said:
If your bootloader is locked just flash any ftf for your device with flashtool
Sent from my 4.2.2 PAC powered Xperia S via Tapatalk
Click to expand...
Click to collapse
and how to do that.......u mean this way http://forum.xda-developers.com/showthread.php?t=1849170
This should help -
http://forum.xda-developers.com/showthread.php?p=23180725
Sent from my 4.2.2 PAC powered Xperia S via Tapatalk
---------- Post added at 07:46 PM ---------- Previous post was at 07:39 PM ----------
zhy0919 said:
Force shutdown (Power + VolUP for 10 seconds until vibrating for 3 times) then use fastboot or flashtool to flash its kernel or all.
Click to expand...
Click to collapse
swarajsaaj said:
It doesn't boot or vibrate 3 times............ It just vibrates once......and not showing any logo too.............
Click to expand...
Click to collapse
Keep holding. Eventually it'll vibrate 3 times and be properly shut off, ready for flashing
Sent from my 4.2.2 PAC powered Xperia S via Tapatalk
Ben36 said:
This should help -
http://forum.xda-developers.com/showthread.php?p=23180725
Sent from my 4.2.2 PAC powered Xperia S via Tapatalk
---------- Post added at 07:46 PM ---------- Previous post was at 07:39 PM ----------
Keep holding. Eventually it'll vibrate 3 times and be properly shut off, ready for flashing
Sent from my 4.2.2 PAC powered Xperia S via Tapatalk
Click to expand...
Click to collapse
Nothing happens......Kept holding them..........just one vibration and a blue LED flash..............nothing else
swarajsaaj said:
Nothing happens......Kept holding them..........just one vibration and a blue LED flash..............nothing else
Click to expand...
Click to collapse
Hey Guys..............I was trying to flash using Flashtool but now my phone is continuosly in flashmode... green LED whenever I connect it to USB which is not allowing me to flash it............any idea how to handle this...??
swarajsaaj said:
Hey Guys..............I was trying to flash using Flashtool but now my phone is continuosly in flashmode... green LED whenever I connect it to USB which is not allowing me to flash it............any idea how to handle this...??
Click to expand...
Click to collapse
Green led means chared too.
How do you tell it is in flash mode? What is flashtool reporting?
Flash mode IS what you need to flash new firmware.
ChikeD said:
Green led means chared too.
How do you tell it is in flash mode? What is flashtool reporting?
Flash mode IS what you need to flash new firmware.
Click to expand...
Click to collapse
green led means the LED STRIP is green.........and flashtools tells to unplug->switch off->back button->plug usb.......................bt that not working too..............
Please help me to get the phone in a position so I can flash it....like completely switching off...... because on pluggin usb it automatically lights green led...
swarajsaaj said:
green led means the LED STRIP is green.........and flashtools tells to unplug->switch off->back button->plug usb.......................bt that not working too..............
Please help me to get the phone in a position so I can flash it....like completely switching off...... because on pluggin usb it automatically lights green led...
Click to expand...
Click to collapse
Open flashtool, connect the usb while pressing volume down, does flashtool reports device conndcted in flash mode?
If it does, disconnect the phome and click the flash icon, select flashmode, slect FW file to flash (exclude TA if present), wait untill flashtool ask you to connect the phoen, press volume down and connect the phone, wait to untill flash is finished.
ChikeD said:
Open flashtool, connect the usb while pressing volume down, does flashtool reports device conndcted in flash mode?
If it does, disconnect the phome and click the flash icon, select flashmode, slect FW file to flash (exclude TA if present), wait untill flashtool ask you to connect the phoen, press volume down and connect the phone, wait to untill flash is finished.
Click to expand...
Click to collapse
No it doenst....................I have to manually select it from list.....it doesn't detect my phone.............though green strip is lightened on phone....
swarajsaaj said:
No it doenst....................I have to manually select it from list.....it doesn't detect my phone.............though green strip is lightened on phone....
Click to expand...
Click to collapse
Cab you please save log in flashtool after you try to connect in flash mode, and post it's content?
Hi all this is my first post here.
I flashed the CM10.2 by munjeni but i forgot to format /system
Now my Sola doesn't even start, when i try starting it vibrates and nothing happens
If i charge it and try to start it vibrates, the red led lights for a second and then.. nothing
My PC doesn't recognize it and if i try to fastboot or flash the purple/green led lights fot three seconds and then turns off and flashtool doesn't see the device
PLEASE HELP!!!!!!
ametyst said:
Hi all this is my first post here.
I flashed the CM10.2 by munjeni but i forgot to format /system
Now my Sola doesn't even start, when i try starting it vibrates and nothing happens
If i charge it and try to start it vibrates, the red led lights for a second and then.. nothing
My PC doesn't recognize it and if i try to fastboot or flash the purple/green led lights fot three seconds and then turns off and flashtool doesn't see the device
PLEASE HELP!!!!!!
Click to expand...
Click to collapse
Is your bootloader unlocked?
Make sure it's turned off by pressing power + volume up until you feel 1 + 3 vibrations before attempting fastboot or flash mode.
ChikeD said:
Is your bootloader unlocked?
Make sure it's turned off by pressing power + volume up until you feel 1 + 3 vibrations before attempting fastboot or flash mode.
Click to expand...
Click to collapse
Yes, it's unlocked
Yes, I tried
Please someone help!!!!
Could you connect fastboot/flash mode on the PC you are using now before it happen?
Ok, here it goes...
You know? The same exact thing happened to me, I'll tell you the solution. (yeah, sound like a TV commercial)
Power off the phone by pressing and holding the Power and Volume up buttons, when it vibrates three times release.
Now you have to turn it on in fastboot mode, connect the phone to the computer, press the power and vol up buttons, after two seconds release the power button and you have the blue led, always hold the up button.
Now at this time you need to be fast as ****, because you need to flash the boot.iso kernel in the .zip, if your phone is recognized by flashtool, obviously.
When you have the kernel flashed then reboot the phone and hold the vol up button when the led of many colors blinks, and hell yeah, we are on CWM. At this step, you have to do the same procedure as you did, but be careful this time. If something happens just tell me.
Don't forget to format the system.
---------- Post added at 04:32 PM ---------- Previous post was at 04:31 PM ----------
Just a fact, there's a lot, but a LOT of threads that are made because of the munjeni's ROM, if you have a doubt, search first, then post.
manudo said:
Ok, here it goes...
You know? The same exact thing happened to me, I'll tell you the solution. (yeah, sound like a TV commercial)
Power off the phone by pressing and holding the Power and Volume up buttons, when it vibrates three times release.
Now you have to turn it on in fastboot mode, connect the phone to the computer, press the power and vol up buttons, after two seconds release the power button and you have the blue led, always hold the up button.
Now at this time you need to be fast as ****, because you need to flash the boot.iso kernel in the .zip, if your phone is recognized by flashtool, obviously.
When you have the kernel flashed then reboot the phone and hold the vol up button when the led of many colors blinks, and hell yeah, we are on CWM. At this step, you have to do the same procedure as you did, but be careful this time. If something happens just tell me.
Don't forget to format the system.
---------- Post added at 04:32 PM ---------- Previous post was at 04:31 PM ----------
Just a fact, there's a lot, but a LOT of threads that are made because of the munjeni's ROM, if you have a doubt, search first, then post.
Click to expand...
Click to collapse
Flashtool says "ERROR - This action can only be done in fastboot mode"
My PC doesn't recognise the phone
Please help
ametyst said:
Flashtool says "ERROR - This action can only be done in fastboot mode"
My PC doesn't recognise the phone
Please help
Click to expand...
Click to collapse
Press volume up + USB to PC that should go into fastboot mode
Sent From My Xperia U With An Ultimate XNovaThor Rom
dara007_168 said:
Press volume up + USB to PC that should go into fastboot mode
Sent From My Xperia U With An Ultimate XNovaThor Rom
Click to expand...
Click to collapse
It doesn't stay in fastboot mode. Purple light is on for like 2 or 3 seconds and then it turns off and my pc doesn't recognize the device!!!
All driver installed!!
ametyst said:
It doesn't stay in fastboot mode. Purple light is on for like 2 or 3 seconds and then it turns off and my pc doesn't recognize the device!!!
All driver installed!!
Click to expand...
Click to collapse
U mean Blue light? Pc doesn't recognize doesn't mean that driver problem maybe change usb and try again
Sent From My Xperia U With An Ultimate XNovaThor Rom
ametyst said:
It doesn't stay in fastboot mode. Purple light is on for like 2 or 3 seconds and then it turns off and my pc doesn't recognize the device!!!
All driver installed!!
Click to expand...
Click to collapse
Read my post dude, connect the USB cable, hold power and vol up buttons and two seconds later release power button and continue holding up.
In that time you should flash the boot.iso, but quick.
which os you are using in your pc ?
Solved
Thank you all guys, I think it was a driver problem.
I was using a Pc OS Windows 8, and it didn't recognize the phone.
I tried with a Win 7 PC, installed driver and everything, and i succeded to flash the boot.img
ametyst said:
Thank you all guys, I think it was a driver problem.
I was using a Pc OS Windows 8, and it didn't recognize the phone.
I tried with a Win 7 PC, installed driver and everything, and i succeded to flash the boot.img
Click to expand...
Click to collapse
You can flash from Windows 8 too, just you have to read this guide. http://forum.xda-developers.com/showthread.php?t=2447283
But, ok, you flashed it, great.
More specificly, I used to have Win 8.1
Now, for other causes I'm back to Win 8 and from here i can flash perfectly
I'm writing this for someone else who may have the same issue
:good:
I was using JB rom on my xperia u and then i flashed orignal ics ftf then on first boot at xperia logo it turned off and not turning on when i connect to pc it doesnt detect and i am unable to go to flashmode or fastboot mode and whenever i plug it in for charge the red light that indicates charging turns on but turns off after a while.
PS i already charged it for 20+ hours any solution to get it back guys ???
alexisgepps said:
I was using JB rom on my xperia u and then i flashed orignal ics ftf then on first boot at xperia logo it turned off and not turning on when i connect to pc it doesnt detect and i am unable to go to flashmode or fastboot mode and whenever i plug it in for charge the red light that indicates charging turns on but turns off after a while.
PS i already charged it for 20+ hours any solution to get it back guys ???
Click to expand...
Click to collapse
flash ics firmware again
and say what happens
Are you sure your device is off when you're connecting it to your computer? Press and hold volume up button with powerbutton untill you've felt a vibration followed by a serie of vibrations and then try to connect it in flashmode.
must be the kernel or rom you flashed doesn't support offline charging
bharathbondfire said:
flash ics firmware again
and say what happens
Click to expand...
Click to collapse
It is not going in flash mode or fastboot mode as its not detected by pc
Biodegradable said:
must be the kernel or rom you flashed doesn't support offline charging
Click to expand...
Click to collapse
so waht to do
alexisgepps said:
so waht to do
Click to expand...
Click to collapse
do a hard reset like till u get three vibrations ... hold volume down and plug in usb .. if the led goes green that means u have entered flashmode
suyash691 said:
do a hard reset like till u get three vibrations ... hold volume down and plug in usb .. if the led goes green that means u have entered flashmode
Click to expand...
Click to collapse
How to do hard reset ??
alexisgepps said:
How to do hard reset ??
Click to expand...
Click to collapse
volume up +power button till you get three vibrations in succession ... first u will get one vibration then three in quick succession then release both keys
I rooted my xperia p and tried to change the call log with honami phonebook,I added some commands in build.prop,copied another services.jar to system,after 15 mins,my phone powered off and didnt want to power on,just "SoNY" logo and then black screen,no flashboot or fastboot mode,PLEASE help me :'( is it bricked or what?
this is the thread that I followed : http://forum.xda-developers.com/xperia-u/themes-apps/mod-honami-phonebook-v2-light-black-14-t2389777
It couldnt be. try connecting phone in pc in flashmode then flash stock firmware
pjohn23 said:
It couldnt be. try connecting phone in pc in flashmode then flash stock firmware
Click to expand...
Click to collapse
phone is not detected on pc and can't start phone in fast or flashboot,the LED turns green for 1 or 2 sec than turns red then the phone start (sony logo then black screen)
Then install drivers again
Install those from flashtool\drivers folder choose the ones for xperia u,p,sola,go and last 2 optins also, thats fastboot and flash drivers.
Open flashtool and try plug phone in fastboot mode, watch the led, if it start booting remove phone and watch right down on your pc screen to see if its installing. When it finish try again.
This is 99% of these problems...
Sent from my MT27i using xda app-developers app
yes do as said on above post. it couldnt be a hard brick. AFAIK hard bricks only occur if you flash something not meant for your device. except in Z series.
matood said:
Then install drivers again
Install those from flashtool\drivers folder choose the ones for xperia u,p,sola,go and last 2 optins also, thats fastboot and flash drivers.
Open flashtool and try plug phone in fastboot mode, watch the led, if it start booting remove phone and watch right down on your pc screen to see if its installing. When it finish try again.
This is 99% of these problems...
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
Thanks for this but it's not working :/ I tried it already and I tried it after reading your answer,nothing happens. I installed the flashboot and fastboot drivers,and also xperia u,p and sola drivers,everything is good so far,but when I press volume down button and plug my phone,the LED turns green for 2 sec then red then phone starts and nothing happen,also nothing happens in the flashtool screen :/
Z.Blackbeard said:
Thanks for this but it's not working :/ I tried it already and I tried it after reading your answer,nothing happens. I installed the flashboot and fastboot drivers,and also xperia u,p and sola drivers,everything is good so far,but when I press volume down button and plug my phone,the LED turns green for 2 sec then red then phone starts and nothing happen,also nothing happens in the flashtool screen :/
Click to expand...
Click to collapse
What windows versioon do you have?
Force power off, press power + volume up untill you feel (1+) 3 vibrations and try.
Try fastboot too and see if there is anything in flashtool log.
ChikeD said:
What windows versioon do you have?
Force power off, press power + volume up untill you feel (1+) 3 vibrations and try.
Try fastboot too and see if there is anything in flashtool log.
Click to expand...
Click to collapse
I have windows 7 ultimate 64bit, this morning everything was working perfectly (fast and flashboot modes) but now nothing isi going well damn
I tried what u said to me,tried it so many times this day and nothing is working
Z.Blackbeard said:
I have windows 7 ultimate 64bit, this morning everything was working perfectly (fast and flashboot modes) but now nothing isi going well damn
I tried what u said to me,tried it so many times this day and nothing is working
Click to expand...
Click to collapse
You had fastboot/flash mode working before and now they don't?
Do you feel the 3 vibrations?
Is it charging when pluged to cahrger when off, or even with sony logo?
ChikeD said:
You had fastboot/flash mode working before and now they don't?
Do you feel the 3 vibrations?
Is it charging when pluged to cahrger when off, or even with sony logo?
Click to expand...
Click to collapse
yes they were working perfectly,yes I feel the vibration and yes my phone charges for both pc connection and charger and I think that my battery is at 100%
Z.Blackbeard said:
yes they were working perfectly,yes I feel the vibration and yes my phone charges for both pc connection and charger and I think that my battery is at 100%
Click to expand...
Click to collapse
you flashed stock firmware?
pjohn23 said:
you flashed stock firmware?
Click to expand...
Click to collapse
I don't understand?! I can't go in flashboot mode,how can I flash with stock firmware ? and does stock firmware means the factory one?
if the led is turning green it means you can. but if you dont immeadiately flash stock firmware. it will boot. so you need to prepare stock ftf firmware for your device, choose it, wait for flashtool to tell you to connect your phone in flashmode. then connect your phone in flashmode
pjohn23 said:
if the led is turning green it means you can. but if you dont immeadiately flash stock firmware. it will boot. so you need to prepare stock ftf firmware for your device, choose it, wait for flashtool to tell you to connect your phone in flashmode. then connect your phone in flashmode
Click to expand...
Click to collapse
If it doesn't show connected in flash mode in flashtool he cannot flash
Oh, how will he recover his device then? Just trying to help
pjohn23 said:
Oh, how will he recover his device then? Just trying to help
Click to expand...
Click to collapse
Yes it's a problem, but I've seen a few that have managed to fix it by disconnecting the battery.
xperia p has removable battery?
pjohn23 said:
xperia p has removable battery?
Click to expand...
Click to collapse
Nope, u need to open it and disconnect it
You dont need disconnect anything. Your phone is not bricked, its working. The only problem is your drivers, you have to manage install them and it will work. This has been here thousand times.
Sent from my MT27i using xda app-developers app
FIXED IT !! I don't know what happened during the night,but this morning I tried to boot my phone and it did respond !! then I flashed firmware and it worked like charm I was going to try the jig usb as a last hope,but It worked and you were right @matood thank you all for your support