Ok..so i admit, Ive stuffed up AND didnt take a nandroid backup.
Rule #1..take a backup!
Secondly, Ive been running stock 2.22.707.6 for a while, and although my phone is unlocked (tried a few custom ROM's in the past) I prefer the stability of a stock ROM.
I wanted to install Awesome beats V.5, which requires SU, busybox etc installed.
No problem, installed SU and busybox, root access all working fine and ran Awesome beats Aroma installer V.5. All completed successfully.
BUT..now I have no sound from the speaker OR headphones. Looks like it maybe doesnt work on Stock DX ROM's? (are they AOSP?)
Anyway..to my question. Id like to re-install to 2.22.707.6 (Im CID 44) so I can do one of two things. Either go back to stock, root again, then remove/re-install everything
OR..
Is there a DEODEXED 2.22.707.6 ROM floating around? I can find CKPV5's excellent tut on restoring to stock, but if there's a pre-rooted, deodexed stock ROM then this would make things easier?
How do I get to 2.22.707.6 from the current deodexed version of 2.20.401.5....OTA updates work still with this?
Thanks for any help you can be.
u have CID 044.
There are many stock NANDROID for 044 available. Search in Threads.
(As they are nandroids, so you will get complete factory stock so future updates will be fine, IF ANY arrives. Just follow the restoration guide and restore nandroid then reflash stock recovery and you're done)
I'm also on 044, so u are indeed covered.
neXus PRIME said:
u have CID 044.
There are many stock NANDROID for 044 available. Search in Threads.
(As they are nandroids, so you will get complete factory stock so future updates will be fine, IF ANY arrives. Just follow the restoration guide and restore nandroid then reflash stock recovery and you're done)
I'm also on 044, so u are indeed covered.
Click to expand...
Click to collapse
Thanks for the reply neXus,
Yep, I'm aware there is a stock 2.22.707.6 that I can re-install, root, install SU, busybox, adblock etc and then uninstall all the bloat from the stock 044 ROM
But..being a bit lazy is there a deodexed 2.22.707.6 ROM? and if not, if I use the 2.20.401.5 deodexed ROM as a start point, can I then run an OTA update to get it to 2.22.707.6?
Cheers
No, there isn't a deodexed version for your software version. And you can't run the OTA on a deodexed ROM. So you have the choice of either install a different ROM or deodex your software version yourself (using android kitchen, there are many tutorials for that on XDA, jsut search for it).
dansou901 said:
No, there isn't a deodexed version for your software version. And you can't run the OTA on a deodexed ROM. So you have the choice of either install a different ROM or deodex your software version yourself (using android kitchen, there are many tutorials for that on XDA, jsut search for it).
Click to expand...
Click to collapse
Thanks..thought this would be the case, but worth asking.:good:
Related
I have an DROID RAZR XT910 GSM/CDMA with the following stock ICS: 673.94.328.XT910.Optus.en.AU, Version 4.0.4, Build 6.7.3-94_SPI-328 and while looking at all the mods and roms out there I'm not confident in flashing this device because the version numbers are different and I don't wanna brick my phone (at close to AUD$800 I think you can understand why) so need help with getting JB onto it (impatient here in OZ, last round from GB to ICS took 6 months from advertised to actually going OTA here). Phone is rooted, have Titanium Backup and SuperSU installed but:
1: don't know how to back up the whole stock in case of failure and need to reinstall
2: not sure that any ROMs are safe to use in my phone (differing stock numbers etc)
3: what other software needed to make this happen
Can anyone please help!?! (where's that old interrobang when you need it)
SimonTWolf said:
I have an DROID RAZR XT910 GSM/CDMA with the following stock ICS: 673.94.328.XT910.Optus.en.AU, Version 4.0.4, Build 6.7.3-94_SPI-328 and while looking at all the mods and roms out there I'm not confident in flashing this device because the version numbers are different and I don't wanna brick my phone (at close to AUD$800 I think you can understand why) so need help with getting JB onto it (impatient here in OZ, last round from GB to ICS took 6 months from advertised to actually going OTA here). Phone is rooted, have Titanium Backup and SuperSU installed but:
1: don't know how to back up the whole stock in case of failure and need to reinstall
2: not sure that any ROMs are safe to use in my phone (differing stock numbers etc)
3: what other software needed to make this happen
Can anyone please help!?! (where's that old interrobang when you need it)
Click to expand...
Click to collapse
Hi!
I'm an Aussie user but bought mine through Kogan (so it's a German phone). If you've already rooted the phone and have Stock ICS I'd recommend installing SS3.11 or BMM and running another JB ROM rather than try to flash stock.
There's heaps of threads with great ROMs on here and the Development thread:
http://forum.xda-developers.com/showthread.php?t=2162827
http://forum.xda-developers.com/showthread.php?t=2028020
Personally I use SS3.11 with CM10.1 as my daily and it's fine. I can also recommend AOKP4.22 which is now officially supported on XT910.
Benefit of this setup is that I can also boot back to stock whenever I want.
Cheers and happy flashing!
:victory:
Big UPS
philharmonick said:
Hi!
I'm an Aussie user but bought mine through Kogan (so it's a German phone). If you've already rooted the phone and have Stock ICS I'd recommend installing SS3.11 or BMM and running another JB ROM rather than try to flash stock.
There's heaps of threads with great ROMs on here and the Development thread:
http://forum.xda-developers.com/showthread.php?t=2162827
http://forum.xda-developers.com/showthread.php?t=2028020
Personally I use SS3.11 with CM10.1 as my daily and it's fine. I can also recommend AOKP4.22 which is now officially supported on XT910.
Benefit of this setup is that I can also boot back to stock whenever I want.
Cheers and happy flashing!
:victory:
Click to expand...
Click to collapse
many thanks, as I don't want to touch the stock at all I'm using this method (ss3 and aokp/cm10.1 tri-boot {keeping the stock I'll have three systems})
SimonTWolf said:
many thanks, as I don't want to touch the stock at all I'm using this method (ss3 and aokp/cm10.1 tri-boot {keeping the stock I'll have three systems})
Click to expand...
Click to collapse
This is a bit late to see this thread, but there is a thread for the retail.au 4.1.2 official. If you do a search of the forum with "retail" and "au" you'll find it. Stock rom that needs to flash a kernel first.
First be sure to root if you're still on ICS. There's a one-click root tool in the development section.
Requires BMM 0.3.4, from there you can install the recovery and reboot into it. It allows you to do a nandroid backup.
dabanhfreak said:
This is a bit late to see this thread, but there is a thread for the retail.au 4.1.2 official. If you do a search of the forum with "retail" and "au" you'll find it. Stock rom that needs to flash a kernel first.
First be sure to root if you're still on ICS. There's a one-click root tool in the development section.
Requires BMM 0.3.4, from there you can install the recovery and reboot into it. It allows you to do a nandroid backup.
Click to expand...
Click to collapse
thx mate, not impressed with AOKP or CM10 so hopefully the 4.1.2 official will keep me happy
So, if I got this right, from ICS 9.4.5.30, I can just flash the JB 10.6.1.14.8 bootloader using TWRP 2.5.0.0, and then flash the CROMi-Xenogenesis 4.6.4 DEODEX rom? I don't have to do incremental upgrades, as it were? I'm running on an Infinity (TF700T, US SKU).
To clarify, I'm rooted and unlocked at the moment. I've already installed GOO. Will I lose root if I flash, or does that only apply to stock roms? Am I better of flashing the latest JB stock rom first and then doing a nandroid backup first? In this case, I will lose root if I understand everything correctly...
I know a lot of this is discussed in the CROMi threads, but no one seems to have asked specifically if you can go directly from ICS to CROMi-Xeno, unless I missed it.
Thanks for any help.
Anyone? Would be nice to get an answer prior to bricking my device...Thanks!
Anyone running CROMi Xenogenesis on TF700T?
I have an M7 HTC One Sprint that keeps bugging me to update it. I'm not sure how to safely do this without bricking it. It is encrypted and I cannot make backups using TWRP at present (I used to before it was encrypted).
Please can you suggest a good ROM or source for updating my phone/radio or whatever?
My current situation...
I have s-off and root
ROM is Stock w Goodies One 2.10
Android 4.3
Sense 5.0
Kernel 3.4.10-g18569d8
Baseband 1.00.20.0913_3
Build
3.04.651.2.CL251863
TWRP 2.6.3
It might work
Well if the update is official then it shouldn't have a problem.
leongkaixiang said:
Well if the update is official then it shouldn't have a problem.
Click to expand...
Click to collapse
hes using custom recovery, proably its that.
well get a stock recovery from a stock rooted one, install on your phone and try updating again. or search to see if anyone made a cwm/twrp flashable of it
Oh well sorry. I'm new at this but I want to try my best at helping others. Sorry
Hey everyone, this is my first post in the Verizon GN2 area. I just swapped my TMo GN2 for a BNIB Verizon Gn2, still has stock MC3. Popped in SIM to make sure all was good, it started to DL the OTA update, so I yanked the battery and SIM until I have it rooted. I have a lot of experience with rooting, ROMS and flashing, but with a same-but-different device, I would like the pro's here to give me a few pointers, if possible.
Best root method for a device with older firmware?
Is the ND7 radio flashable on older kernel\bootloader combos?
If you were in my shoes, what steps would you take to root and flash to keep maximum flexibility in the future?
Thanks to all the devs for their hard work, and thanks in advice for any pointers!
OwenW71 said:
Hey everyone, this is my first post in the Verizon GN2 area. I just swapped my TMo GN2 for a BNIB Verizon Gn2, still has stock MC3. Popped in SIM to make sure all was good, it started to DL the OTA update, so I yanked the battery and SIM until I have it rooted. I have a lot of experience with rooting, ROMS and flashing, but with a same-but-different device, I would like the pro's here to give me a few pointers, if possible.
Best root method for a device with older firmware?
Is the ND7 radio flashable on older kernel\bootloader combos?
If you were in my shoes, what steps would you take to root and flash to keep maximum flexibility in the future?
Thanks to all the devs for their hard work, and thanks in advice for any pointers!
Click to expand...
Click to collapse
1. Best root method for a device with older firmware?
To root and unlock the bootloader on stock 4.1.2, you need to use Adam Outler's CASUAL program found here: ( http://forum.xda-developers.com/showthread.php?t=2272066 ). The version of Casual that worked for me was R515.... just make sure you totally disable all virus scanning on your computer before running it... (you may need to kill processes in Task Manager to stop Window's Defender).
2. Is the ND7 radio flashable on older kernel\bootloader combos?
As far as radio’s/modems go... I know you can flash newer radios on the older ROM/kernel combos.... but I would probably just use the radio that's recommended in the thread for whatever custom ROM you plan to flash.
Here’s some links to where you can grab the radios:
--Grab Beanstown106’s modified ODIN flashable firmware package for MJ9 from the bottom of the first post in this thread: ( http://forum.xda-developers.com/showthread.php?t=2578458 )
--You can grab older recovery flashable radios/modems here: ( http://forum.xda-developers.com/showthread.php?t=2108510 )
--Here's a link for the ND7 4.4.2 RADIO (scroll down on the first post to find it under downloads). It is meant to be flashed in recovery, but it may be a good idea to ODIN flash Beanstown106's modified MJ9 firmware first.... ( http://forum.xda-developers.com/showthread.php?t=2765021 )
--Here's a thread with helpful steps on how to flash the modems in recovery: ( http://forum.xda-developers.com/showthread.php?p=43217826&highlight=install#post43217826 )
--Also, here's a link to a post with more detailed instructions on how to Odin flash the MJ9 firmware after you download and unzip the file... ( http://forum.xda-developers.com/showthread.php?p=50047714&highlight=unzip#post50047714 ).
-------------------------------------------------------------------
3. If you were in my shoes, what steps would you take to root and flash to keep maximum flexibility in the future?
If you flash any full stock builds newer than VRAMC3 4.1.2, then you'll end up locking the bootloader with no way to unlock it at this point (so don't ODIN flash full stock 4.3 or 4.4.2 or take OTA's if you want to keep the option to flash a custom recovery/kernel/etc...). Use the recovery flashable 4.3 and 4.4.2 based ROM's in the development threads if you want to experience features from those builds and maintain ability to unlock bootloader. In my personal experience, I've found 4.1.2 based ROM's to be the most stable for me with the fewest overall problems. I ran JellyBeans build 22 as my main "go to" ROM for a long time with no real problems.... (that was the last JellyBeans ROM that he put out with a 4.1.2 base before he moved on to 4.3 for that ROM. You can still grab the older JellyBeans build 22 from Beanstown106's Android File Host if you're interested.... just go to this thread: http://forum.xda-developers.com/showthread.php?t=2032447 -- and scroll down on the first post to find the link for the older builds).
I'd also recommend that you read through all the stickies in the development/general/help threads, just to get familiar with all the ins and outs of this phone. Especially check out droidstyle's Guide on – ( "How to Root/Rom/Return to Stock the VZW Galaxy Note II" ). This will save your butt if you mess something up and need to return to stock to start over.
Thanks for the info!
I think I will stick with the MC3 BL for now, and try to find a 4.4.2 flashable ROM that works well. Most of the ones I've looked at are saying they require the MJ9 or later BL...seems odd to require a locked bootloader. Recommendations are welcome, but I'm not against doing my homework. Thanks again for the reply and info. Already have root and flashed a few ROMs that did not make the grade, but will keep looking.
OwenW71 said:
Thanks for the info!
I think I will stick with the MC3 BL for now, and try to find a 4.4.2 flashable ROM that works well. Most of the ones I've looked at are saying they require the MJ9 or later BL...seems odd to require a locked bootloader. Recommendations are welcome, but I'm not against doing my homework. Thanks again for the reply and info. Already have root and flashed a few ROMs that did not make the grade, but will keep looking.
Click to expand...
Click to collapse
Mj9 is the radio. Never upgrade your bootloader or you will be locked.
Sent from my SCH-I605 using Tapatalk
@ OwenW71,
I know it's kind of confusing... but the link I gave you to Beanstown106’s modified MJ9 firmware package at: ( http://forum.xda-developers.com/showthread.php?t=2578458 )... it is not the official stock mj9 firmware... It's just needed for updating the radios/wifi to use when flashing custom 4.3+ ROM'S from the development threads.
Like michigan66 said... you don't want to take any OTA's for 4.3/4.4.2...or odin flash the official stock Verizon 4.3/4.4.2 firmware... because that will lock the bootloader with no way for you to unlock it.
mattnmag said:
@ OwenW71,
I know it's kind of confusing... but the link I gave you to Beanstown106’s modified MJ9 firmware package at: ( http://forum.xda-developers.com/showthread.php?t=2578458 )... it is not the official stock mj9 firmware... It's just needed for updating the radios/wifi to use when flashing custom 4.3+ ROM'S from the development threads.
Like michigan66 said... you don't want to take any OTA's for 4.3/4.4.2...or odin flash the official stock Verizon 4.3/4.4.2 firmware... because that will lock the bootloader with no way for you to unlock it.
Click to expand...
Click to collapse
So that thread says it is a full firmware package, but you're saying it will leave my bootloader alone? I'm not accustomed to seeing Odin packages that don't mess with the BL. According to the post, I flash the firmware with Odin, then use Recovery to flash the ROM? It did not state how the ROM is flashed.
It also looks like TWRP is not in favor right now, but it is the recovery that the jailbreak provides. Guess I should switch to Philz. Ah, so much to do...
THanks again!
OwenW71 said:
So that thread says it is a full firmware package, but you're saying it will leave my bootloader alone? I'm not accustomed to seeing Odin packages that don't mess with the BL. According to the post, I flash the firmware with Odin, then use Recovery to flash the ROM? It did not state how the ROM is flashed.
It also looks like TWRP is not in favor right now, but it is the recovery that the jailbreak provides. Guess I should switch to Philz. Ah, so much to do...
THanks again!
Click to expand...
Click to collapse
So where BeansTown106 says.... "You Need to Flash This Full Firmware Package Via Odin to get the new modem and to get wifi to work..."— for clarification, this is not factory stock Verizon firmware. Beanstown106 modified things and this is just the radio/wifi related portion. It will not change the VRAMC3 bootloader.
Yes, you will flash custom ROM'S via a zip file in custom recovery.... (you don't want to flash any custom ROM'S in Odin after using CASUAL-- see this thread for more about why: http://forum.xda-developers.com/showthread.php?p=35396049).
TWRP works fine for some ROM's and Philz or CWM is recommended for others. Most ROM threads recommend a recovery and I would just use whatever is recommended for the custom ROM that you decide to flash.
Okay, thanks! I was aware of the warning about using Odin for custom ROMs, so that is part of what gave me pause about flashing MJ9, in addition to the BL concern.
Thanks so much for the guidance. The stickies are good, but they did not really spell out the process for keeping an unlocked BL while still making my way up a more current firmware.
Honestly, guys like you make this forum a joy. I very briefly used the iPhone 5s that work gave me, and I was going ape****. I'm not an Apple hater, but iPhones suck. Slow, bad apps, bad gps, no customization. So glad to come back from the dark side! And with guys like this to help a fella out, can there be any question which side is on the side of light and goodness?
Cheers!
Sent from my SCH-I605 using XDA Free mobile app
Title. I really want to install xposed but it needs deodexed ROM. I am running on 5.0.1, is it possible to flash a deodexed rom, and if so, where can I find one.
Same, I've tried a bunch and none seem to work for me. Not sure why but if there are any updates/new versions then I'd love to know....
Same......my deodexed didnt work and i cant get stang to load properly
Am on stang5liter 5 edition,from op1,using FlashFire app on Google play.
You have to leave system checked on the FlashFire system menu so the process success.
Am using Xposed modules,almost custom rom and faster than the original op1 rom.
I hope it help someone.
IAM NOT RESPONSIBLE FOR KILLING YOUR PHONE.THE USUAL.
I switch ROM's about once a month. There are five available and I have tried them all. Stang5litre is my go to. I can't figure out what you all are doing wrong. Do you have The latest SuperSU and Busy Box installed?