help. strange data connectivity problem(hsdpa) - Galaxy S II Q&A, Help & Troubleshooting

hi all,
I have this strange data connectivity issue, I am on a network(bsnl/mtnl, mumbai) and it supports hsdpa at 2100mhz band and our s2 supports that. now the problem is I am unable to connect to hsdpa network(data) signal comes fine no issues there. but with the same sim if I use my frnd's xperia go I am able to get data connection just fine. moreover if I move out of my area then I am able to connect on s2 also. I dont know what the problem is.
I am on jellysnap rom. xxms4 modem and xxms1 base.

amit.mastermind90 said:
hi all,
I have this strange data connectivity issue, I am on a network(bsnl/mtnl, mumbai) and it supports hsdpa at 2100mhz band and our s2 supports that. now the problem is I am unable to connect to hsdpa network(data) signal comes fine no issues there. but with the same sim if I use my frnd's xperia go I am able to get data connection just fine. moreover if I move out of my area then I am able to connect on s2 also. I dont know what the problem is.
I am on jellysnap rom. xxms4 modem and xxms1 base.
Click to expand...
Click to collapse
did you try to change the modem? or you can check this with other rom whether it is working there or not.

amit.mastermind90 said:
hi all,
I have this strange data connectivity issue, I am on a network(bsnl/mtnl, mumbai) and it supports hsdpa at 2100mhz band and our s2 supports that. now the problem is I am unable to connect to hsdpa network(data) signal comes fine no issues there. but with the same sim if I use my frnd's xperia go I am able to get data connection just fine. moreover if I move out of my area then I am able to connect on s2 also. I dont know what the problem is.
I am on jellysnap rom. xxms4 modem and xxms1 base.
Click to expand...
Click to collapse
you could try checking your apn settings, detection of apn are different on different roms.
or try forcing the network to use WCDMA mode (go to phone, then dial *#*#4636#*#*), go inside the first menu there and force it to use WCDMA (incase the rom toggles are misbehaving)

Twiq said:
you could try checking your apn settings, detection of apn are different on different roms.
or try forcing the network to use WCDMA mode (go to phone, then dial *#*#4636#*#*), go inside the first menu there and force it to use WCDMA (incase the rom toggles are misbehaving)
Click to expand...
Click to collapse
yes I tried that.. I have changed ROMs, changed modems... I am running out of options... !!! tried forcing wcdma mode too.. .
I think problem lies with hspa+ and HSDPA.... I

I will flash a stock ROM then we will see what happens... !!!

amit.mastermind90 said:
I will flash a stock ROM then we will see what happens... !!!
Click to expand...
Click to collapse
check your APN settings while your moving ROMs too. see if theres any different

Twiq said:
check your APN settings while your moving ROMs too. see if theres any different
Click to expand...
Click to collapse
no apns are right as i can connect to edge network just fine in evry rom.

Related

[Q] How to on 3g In samsung galaxy ace

I m from pune and,Recently I activated airtel 3g in my samsung galaxy ace... Bt problem is that I m not getting 3g signal.
In samsung galaxy 3 there are options like dual mode/3g mode,bt in galaxy ace when I go in mobile networks there are this options : enable packet data, data roaming, access point name, mobile operator, use only 2g networks.according to airtel customer care I should chk on enable packet data and unchk on use only 2g network options I did so bt still can't get 3g,signals..
I tried to use 3g signals in many places in pune..bt still I m jst,getting edge connection
Are you sure there is 3G network? If so, did you make sure that in APN list there is the one provided by your carrier for 3G ?
mastrone said:
Are you sure there is 3G network? If so, did you make sure that in APN list there is the one provided by your carrier for 3G ?
Click to expand...
Click to collapse
Yups I m sure that here in pune there is a 3g network and as I said I have already unchkd use only 2g network option..bt still can't get 3g signal...so is there any additinal settings that I mst do...
vj1 said:
Yups I m sure that here in pune there is a 3g network and as I said I have already unchkd use only 2g network option..bt still can't get 3g signal...so is there any additinal settings that I mst do...
Click to expand...
Click to collapse
Have you checked your APN settings?
Uncheck 2g mode only. If still you not see 3g symbol at left side of signal then in network setting go network operators and search available networks and choose airtel 3g.if still not get then go into keypad and type *#*#4636#*#* and select option phone imformation and in that you see gsm auto selected. In that choose wcdma only and press turn off radio then press turn on radio now press home button(not back button). You will get 3g. If not then reboot. I hope this will help you
You are using the wrong ROM or MODEM file with a Band Operator that's not supported for your company. Review the frecuency of your operator for 3G. Then, flash your phone with the correct ROM.
Hello everybody!
I installed the rom version 2.3.4 (vivo - Brazil) in my galaxy s5830L (3g 850/1900MHz). My mobile carrier works with 3G 2100MHz, so I can not connect to 3G only 2G (edge​​).
Do you know if there is any possibility to enable 2100MHz in s5830L 3G?
Thank you!
nims11 said:
Uncheck 2g mode only. If still you not see 3g symbol at left side of signal then in network setting go network operators and search available networks and choose airtel 3g.if still not get then go into keypad and type *#*#4636#*#* and select option phone imformation and in that you see gsm auto selected. In that choose wcdma only and press turn off radio then press turn on radio now press home button(not back button). You will get 3g. If not then reboot. I hope this will help you
Click to expand...
Click to collapse
Hey really thnks for ur help...bt I want to clear some doubts see as u said i mst select airtel 3g bt problem is in network operators I m jst getting airtel option not airtel 3g.
And in second method after entering that code u said to press home button is it the that big middle button..and how to again stop 3g...
Most imp I chked in samsung monte with same sim card of airtel in same area bt in that mobile 3g signal came immediately...
See I know I m asking u many ? Bt plz try to understand I'm new to this!!
iceman2029 said:
You are using the wrong ROM or MODEM file with a Band Operator that's not supported for your company. Revieew the frecuency of your operator for 3G. Then, flash your phone with the correct ROM.
Click to expand...
Click to collapse
How to review frequency of operator for 3g..
And one more thing when I tried with same sim card in same area on samsung monte I immediately got 3g signal jst after selecting 3g mode..so I want to know do u still think there is a problem with rom....
Hey I tried ur method of dialing that code and then changing it to WCDMA mode ..after selecting this option for some time in status it shows no connection like a white circle with cross line in it and after few seconds it again shows Edge connection ..and again u enter that code in that network type option it again automatically gets change to gsm auto!!
Now I m really getting frustrated by this problem I called Samsung helpline they said for using 3g in some mobiles u have to do a Software Update in Samsung Service centre after which u will get that 3g/dual network mode option in ur Mobile network settings like other mobiles, bt I doubt if they can really help me bcozz about 2 months ago I had already done a Firmware update earlier its version was KC1 and after update its version is KC7 which i think is the latest version of Firmware available in India for Samsung galaxy ace. I said this to Samsung technical Support but they say that Software update and Firmware Update are completely Differnet things…
So I want to know whether this Software update and Firmware update are this realy different Or its same. I have also Noticed one more thing in “Samsung galaxy Fit “also there is no Option like 3g/dual Network mode to Enable 3g!! is that option diabled in all galaxy Ace & Fit models or is it only in my cell???
Hey I tried ur method of dialing that code and then changing it to WCDMA mode ..after selecting this option for some time in status it shows no connection like a white circle with cross line in it and after few seconds it again shows Edge connection ..and again u enter that code in that network type option it again automatically gets change to gsm auto!!
Now I m really getting frustrated by this problem I called Samsung helpline they said for using 3g in some mobiles u have to do a Software Update in Samsung Service centre after which u will get that 3g/dual network mode option in ur Mobile network settings like other mobiles, bt I doubt if they can really help me bcozz about 2 months ago I had already done a Firmware update earlier its version was KC1 and after update its version is KC7 which i think is the latest version of Firmware available in India for Samsung galaxy ace. I said this to Samsung technical Support but they say that Software update and Firmware Update are completely Differnet things…
So I want to know whether this Software update and Firmware update are this realy different Or its same. I have also Noticed one more thing in “Samsung galaxy Fit “also there is no Option like 3g/dual Network mode to Enable 3g!! is that option diabled in all galaxy Ace & Fit models or is it only in my cell???
After selecting wcdma only turnoff radio and again turn on radio then push middal button called home button. When you doesnt want 3g mode tick on 2g mode only.
I also suffer from same problem when i use bsnl3g. You should camplain in airtel servise center because it is not fault of mobile but fault of network provider. If you want to chek then insert other sim and uncheck on 2g only and select access poit . If you get 3g then your mobile is not in fault. I want to know that you get 2g internet on that airtel card? And you choose access point?if not then select access point
nims11 said:
After selecting wcdma only turnoff radio and again turn on radio then push middal button called home button. When you doesnt want 3g mode tick on 2g mode only.
I also suffer from same problem when i use bsnl3g. You should camplain in airtel servise center because it is not fault of mobile but fault of network provider. If you want to chek then insert other sim and uncheck on 2g only and select access poit . If you get 3g then your mobile is not in fault. I want to know that you get 2g internet on that airtel card? And you choose access point?if not then select access point
Click to expand...
Click to collapse
dude i think u are not reading my posts completely..i can say this bcozz right from my first post of this thread i m mentioning that with same sim card of airtel i m getting edge connection..and the problem is not with sim card its with cell itself bcozz when i tried same sim card in other mobile i immediately got 3g signal in same area..that bcozz after lots of search on google i saw that many are facing this problem of 3g not connecting..its due to a software bug in froyo 2.2.1 so people say only way to solve this problem is we will have to upgrade our froyo to 2.3.3 or 2.3.4 this might solve our problems bt still i have some queries which i have to clear like see if u can ans them :
1. which one will be better to go with android 2.3.3 Gingerbread or 2.3.4 Gingerbread for Samsung galaxy ace I mean which one has less problems and will solve my 3g problem!!
2. after unofficially upgrading to 2.3.3 or 2.3.4 will I be able to officially upgrade to 2.3.5 through kies in future.
3. For upgrading to 2.3.3 or 2.3.4 is it necessary to root the phone..
4. how much time does a whole upgrade process takes if my internet speed is Minimum 1Mbps…
5. How to come back to 2.2.1 Froyo Default version from 2.3.3 or 2.3.4(Steps with video or Img link will be very helpful)
Update to 2.3.4 is realy easy and not require root. You should first download 2.3.4 flash file and after download use odin to install flash file. When official update comes you can downgrade your phone to froyo so kies update it to latest version so chill.
My email is [email protected]
contact me i will explain you how to update to 2.3.4 and where to download
nims11 said:
Update to 2.3.4 is realy easy and not require root. You should first download 2.3.4 flash file and after download use odin to install flash file. When official update comes you can downgrade your phone to froyo so kies update it to latest version so chill.
My email is [email protected]
contact me i will explain you how to update to 2.3.4 and where to download
Click to expand...
Click to collapse
K gr8 ..jst 2 questions how to downgrade back to froyo 2.2.1 I mean steps... And secondly does 2.3.4 gives any problem I mean any hangs, etc...
2.3.4 not hang atall. It remove lags from many games. I use it from 2 months and not get any problem. So just update. And abowt downgrade i post in my blog tomorrow. I hope you undarstand because you need to flash two firmware to get ddkc1(indian firmware)firmware back. So wait for that. But i ensure you that you will not downgrade in near future because gingerbread rocks
its due to a software bug in froyo 2.2.1 so people say only way to solve this problem is we will have to upgrade our froyo to 2.3.3 or 2.3.4 this might solve our problems bt still i have some queries which i have to clear like see if u can ans them :
Click to expand...
Click to collapse
Strange I use the same phone no issues getting 3G here in Mumbai on a Vodaphone network. In my phone under settings - wireless and network settings- Mobile Networks- the option of use only 2G networks is unchecked. Let us know if the firmware update rectifies the issue....
hey Dude any idea wat are Apn Settings for Airtel 3g ..
i mean :
Access Point name: ??
APN:??
Hi.
I bought ace S5830 from USA (and this phone only support 850/1900 Mhz), but i live in Azerbaijan and here I use mobile operator sim that only have 2100 mhz band for 3G network. Logically, my phone can not connect to 3G network. My question,
1.is it possible change the band?
2. If it is possible, how we can change, upgrade to new firmware ?
p.s. I have upgraded it to GINGERBREAD.UBKP7
Please help me to solve these issue,
Thank you before hand.
plese help me with problem above

[Q] International Galaxy S3 isn't able to connect to Etisalat.af 3g data service

Hi. I'm here in Herat (Afghanistan) and I've bought an ETISALAT.af sim card that is supposed to provide also the 3g data connection. I've an International Galaxy S3 with Omega ROM v27 (4.1.1 JB) obviously rooted with Kernel 3.0.31-204919 and XXDLIB. the problem is that the smartphone is able to connect to ETISALAT 3g network (that sent to me also config sms) but it doesn't recognize the data network (no 3g, H or anything else near the signal bars). I've tried to solve changin APN but the result is the same. could you please help me.
Thanks in advance for your efforts.
cp108 said:
Hi. I'm here in Herat (Afghanistan) and I've bought an ETISALAT.af sim card that is supposed to provide also the 3g data connection. I've an International Galaxy S3 with Omega ROM v27 (4.1.1 JB) obviously rooted with Kernel 3.0.31-204919 and XXDLIB. the problem is that the smartphone is able to connect to ETISALAT 3g network (that sent to me also config sms) but it doesn't recognize the data network (no 3g, H or anything else near the signal bars). I've tried to solve changin APN but the result is the same. could you please help me.
Thanks in advance for your efforts.
Click to expand...
Click to collapse
try changing ur modem and see, since no data connection is more of a modem related issue
Sun90 said:
try changing ur modem and see, since no data connection is more of a modem related issue
Click to expand...
Click to collapse
Thank you for your answer. I have already tried this and I've also reverted to Omega v13 ( Ics based) wich have a different modem.
Hi cp108,
I had the same problem when I install the Omega ROM v27.1(Modem XXDLIB : same modem that your device has) on my Samsung Galaxy S3 i9300. Then I changed the access point name settings and data connection turned on. Have you changed following attributes?
1. Name
2. APN
3. Proxy
4. Port
5. MCC
6. MNC
7. Authentication type
8. APN type
In my case, after I changing above the problem solved.

Network mode refuses to change (no data)

Hello everyone,
I'm new to the whole rooting process...
I rooted my phone and sim unlocked because I moved temporarily to a new location...
I installed custom rom and I lost data connectivity...
I suspect the rom being the problem because I tried many popular roms such as RootBox, PA, and finally Sapir... RR doesn't work for some reason...
Nor do I think the problem is with the modem because restoring the old stock rom back works like a charm...
I also tried so many different modems and the problem persist...
I made sure the APN setting are set and are the exact same from the stock rom that works fine...
I also made sure data is enabled and the phone is not in roaming mode...
Current Modem: XXKI4
Android Version: Sapir 4.1.2
Phone : GT-I9100M (Canadian Bell) << I read somewhere it is the same as GT-I9100
Current Network: mobily
After some googling I found out about the *#*#4636#*#* and I tried changing it from there and I kinda got the problem...
It is set to CDMA/GSM on the stock rom and it changes back when I exit and I enter 4636 again...
On custom roms it is set to "WCDMA preferred" and every freaking time I change it to anything but "WCDMA preferred" and I exit then enter 4636 again it changes to Unknown...
Ping IoAddr: Fail: IP addr not reachable
Ping Hostname: unknown
HTTP Client test: Fail: IOException
GSM service: In service
GPRS service: Connecting then Disconnected
Network type: UMTS
it becomes EDGE on GSM...
and on stock rom it is either UMTS:3 or HSPA:11 whatever this means...
Thanks a lot for the help...
I want to add a few things...
the data doesn't even work on 2g...
and everything works fine on wifi...
I just can't get the mobile data to work...
Bump
I have the same problem too. not yet fixed.
http://forum.xda-developers.com/showthread.php?p=32223367
Try the workarounds I have posted and see if it works for you?
Bump....
seriously.. not a single suggestion...
is the problem that hard or that easy...?
aswin.dwarakanath said:
I have the same problem too. not yet fixed.
http://forum.xda-developers.com/showthread.php?p=32223367
Try the workarounds I have posted and see if it works for you?
Click to expand...
Click to collapse
thanks... but no it doesnt work for me...
could someone help this one? because i have similar problem. and it won't fix yet.
serpentlord said:
could someone help this one? because i have similar problem. and it won't fix yet.
Click to expand...
Click to collapse
Bump Did u get it working?
Is data set to on in setting on rr?
Sent from my GT-I9100 using xda app-developers app

Need help with sony xperia SP connection problem (wifi and phone signal

Here's my story, about 3 weeks ago i bought my new xperia SP, and first i get the sim card provide by some operator that include the package. And for some reason i have to change the sim card for another operator, but after i change the sim card the signal seems low then the first operator. And i try to get some information about this android phone. And i get this some information that give some advice about setting the signal. And the good thing about it is it can make the battery can last a little longer because the setting set just choose the wcdma only or just gsm only it depends what the best in my area, and can reduce the heating that cause from device always search what the best network if we choose the wcdma/gsm option. And here the thing start. I follow the instruction: first you dial *#*#4636#*#* and the setting window come out. And the choose phone setting, set the network to wcdma only or gsm only. And i choose the wcdma only. After that start to refresh the smsc and update it. After that the instruction said to choose to select the radio band. After i select the radio band my device loose the signal and it just show x in signal bar. After that i try to restart the phone but it come out the same no signal appear. I try to remove and replace the sim card but it steel same, i try to change with another sim card from another operator and it steel same. After that my last choice is to reset my phone to factory setting. And seems it work my signal is back. But after that my phone signal become so weak and recently i got my signal got lost for a view time it just show x but it's not for long the bar seems back again. I start confused is that the advice i choose is wrong ? And there a some info that i got from some search in internet that says upgrade the baseband can make a risk that wifi, LTE signal, and the other connections setting loose they capabilities. I'm so frustated now need help immediately, anybody have some advice or solution? thank you first.
send from my Sony Xperia SP using XDA Premium
Anyone here can give some info about my problem here?
Sent from my C5302 using xda premium
BlackFilter said:
Here's my story, about 3 weeks ago i bought my new xperia SP, and first i get the sim card provide by some operator that include the package. And for some reason i have to change the sim card for another operator, but after i change the sim card the signal seems low then the first operator. And i try to get some information about this android phone. And i get this some information that give some advice about setting the signal. And the good thing about it is it can make the battery can last a little longer because the setting set just choose the wcdma only or just gsm only it depends what the best in my area, and can reduce the heating that cause from device always search what the best network if we choose the wcdma/gsm option. And here the thing start. I follow the instruction: first you dial *#*#4636#*#* and the setting window come out. And the choose phone setting, set the network to wcdma only or gsm only. And i choose the wcdma only. After that start to refresh the smsc and update it. After that the instruction said to choose to select the radio band. After i select the radio band my device loose the signal and it just show x in signal bar. After that i try to restart the phone but it come out the same no signal appear. I try to remove and replace the sim card but it steel same, i try to change with another sim card from another operator and it steel same. After that my last choice is to reset my phone to factory setting. And seems it work my signal is back. But after that my phone signal become so weak and recently i got my signal got lost for a view time it just show x but it's not for long the bar seems back again. I start confused is that the advice i choose is wrong ? And there a some info that i got from some search in internet that says upgrade the baseband can make a risk that wifi, LTE signal, and the other connections setting loose they capabilities. I'm so frustated now need help immediately, anybody have some advice or solution? thank you first.
send from my Sony Xperia SP using XDA Premium
Click to expand...
Click to collapse
I've been facing the excat same problem with my Xperia SP (C5303)....
Please, can ayone help us?
Thanks.
I have the same problem too. I go to the service menu then select the USA band, and I lost the signal. And there is no networks found/available!
The solution is, you need to flash the baseband. First you need to download the newest stock rom (the stock must for your country, you can try asking Google). After that, you download and install the flashtool ( ask to Google too ).
After that, install the drivers (not compatible on Windows 8.1 ), goto C:/FlashTool/Drivers, and run the installer, then select Flashmode Driver.
After you install the driver, move the downloaded rom to C:/FlashTool/Firmwares, then run the flashtool via start menu.
Click thunder icon, select Flashmode, then select the firmware you downloaded.
Make sure that you only flash baseband, not kernel or wipe data, or anything (I forgot where the checkboxes located)
Then, click flash. Turn of your phone. Then hold Volume Down Button, and plug the USB cable that connected to PC, until the illumination bar turns green.
Then wait the process, and it's done.
I hope this helps you
If you want Indonesian version you can message me )
Xperia sp wifi problem
WHEN I ROOTED MY XPERIA IT WAS OK. BUT NOW A DAYS WIFI CONNECTING LOW AND SHOWING POOR CONNECTION? is there any update for xperia sp wifi? any solution plzz help
Smankusors said:
I have the same problem too. I go to the service menu then select the USA band, and I lost the signal. And there is no networks found/available!
The solution is, you need to flash the baseband. First you need to download the newest stock rom (the stock must for your country, you can try asking Google). After that, you download and install the flashtool ( ask to Google too ).
After that, install the drivers (not compatible on Windows 8.1 ), goto C:/FlashTool/Drivers, and run the installer, then select Flashmode Driver.
After you install the driver, move the downloaded rom to C:/FlashTool/Firmwares, then run the flashtool via start menu.
Click thunder icon, select Flashmode, then select the firmware you downloaded.
Make sure that you only flash baseband, not kernel or wipe data, or anything (I forgot where the checkboxes located)
Then, click flash. Turn of your phone. Then hold Volume Down Button, and plug the USB cable that connected to PC, until the illumination bar turns green.
Then wait the process, and it's done.
I hope this helps you
If you want Indonesian version you can message me )
Click to expand...
Click to collapse
Did this method work? cause two of my friends are having signals dropping issue. they both are updated to the latest version. 12.1.A.1.201
Same issue - did you get a resolution?
Was this problem resolved? How? Please share your solution, as I too am facing the same issue now.
Damn bad English :crying: :crying:
babugd said:
WHEN I ROOTED MY XPERIA IT WAS OK. BUT NOW A DAYS WIFI CONNECTING LOW AND SHOWING POOR CONNECTION? is there any update for xperia sp wifi? any solution plzz help
Click to expand...
Click to collapse
well Sony is bad, it is normal the XSP got low signal and also this product is discontinued. There will be no any updates again in the future :crying:
chesterr said:
Did this method work? cause two of my friends are having signals dropping issue. they both are updated to the latest version. 12.1.A.1.201
Click to expand...
Click to collapse
that solution is for you accidently choosen the wrong band, and you lost the signal forever. If they are having low signals, try switching from WCDMA to 3G
soumit.c said:
Was this problem resolved? How? Please share your solution, as I too am facing the same issue now.
Click to expand...
Click to collapse
what is your problem? No signal or low signal?
Not connecting to 3G.
Smankusors said:
Originally Posted by soumit.c
Was this problem resolved? How? Please share your solution, as I too am facing the same issue now.
Smankusors: what is your problem? No signal or low signal?
Click to expand...
Click to collapse
Ok, sorry for not giving details earlier. I've been using my XSP for 6 months on a 2G connexn, and all was good. Then I tried to shift to a 3G and my problem, on WCDMA only or WCDMA Preferred, I get absolutely no connection, no voice, no data, no bars! GSM only for 2G is still fine. Wifi is working fine.

[need help] razr xt910 NO service But phone is reading sim card & its contacts

Guys I have a strange problem my razr wont connect to any of the data 2g or 3g only on custom roms like 4.4 Kitkat,Carbon rom etc . I flashed them on slot 1,2 even on stock slot but no luck.. I tried to change Baseband But It always failed So guys help me.....
Edit 11.12.2013:::
I fixed the problem partially..
I fixed the network mess It was bad radio which did this all I flashed ICS radio and now network works fine in all roms (Stock and Custom) BuT bo mobile data on any of them
Edit::::
Now Phone says NO SERVICE on both stock And custom rom but reads sim card contacts & SMS's...
I tried reflashing stock rom But no success. Help me guys...
2g/3g for many of the newer roms has been a problem with both the XT910 and XT912. I know with cyanogenmod 10.2 I'm still not able to connect to 2g/3g although LTE does work. With the newest release of cyanogenmod 11 though I do get 3g and LTE, although some people have been reporting they are not. Seems it's headed in the right direction. Give the latest CM11 build a shot and see if it works for you.
Sent from my Nexus 10 using xda app-developers app
kk but still i have no luck getting 3g on newer versions too.
Is there any APN that saved in your network setting? If it doesn't, set it and save it by hand.
Sorry for my bad English
yup apn's are saved as usual
3n3rg1c said:
yup apn's are saved as usual
Click to expand...
Click to collapse
Uninstall your SIM CARD, and reinstall it again.
Sorry for my bad English
tried Not working Now even more strange thing happend NO SERVICE on Stock also but phone is reading sim card. I can see contacts & sms saved in sim card...
3n3rg1c said:
tried Not working Now even more strange thing happend NO SERVICE on Stock also but phone is reading sim card. I can see contacts & sms saved in sim card...
Click to expand...
Click to collapse
Reboot
Sorry for my bad English
Nothing is helping me dude I also tried flashing stock rom via rsd also.,.
3n3rg1c said:
Nothing is helping me dude I also tried flashing stock rom via rsd also.,.
Click to expand...
Click to collapse
Can you make a call? Did you have paid the SIM card cost?
Sorry for my bad English
Yup my SIM is in contract and working on other phones I can make and receive calls but not on razr I get NO SERVICE message
Open the phone (or dialer, whatever you would like to call it) and Dial *#*#4636#*#* and go to Phone Information and tell us what the preferred network is.
--
Also:
What ROM did you get LTE Only on?
I learned that sometimes ROMs can mess up NV's. The only way of fixing this is to wipe everything and start fresh. And when you are flashing you cannot downgrade, it will fail every time. You may already know what I am telling you but just in case.
And what carrier are you with?
Sent from my XT912 using Tapatalk
In my case in testing I am on GSM auto prl. I tried Flashing JB stock moto BUT it also did not solved my problem. I have erased my cid and checked with different region stock also but no progress
happened with my friend's xt912
turned out sim jacket problem
Hooray I fixed the network mess It was bad radio which did this all I flashed ICS radio and now network works fine in all roms (Stock and Custom) BuT bo mobile data on any of them
3n3rg1c said:
Hooray I fixed the network mess It was bad radio which did this all I flashed ICS radio and now network works fine in all roms (Stock and Custom) BuT bo mobile data on any of them
Click to expand...
Click to collapse
I m having same mobile phone xt910 with idea sim ... already pissed with moto and google for not releasing JB in entire asia &
Now Same problem here but differnence i having this problem a sudden out of nowhere
its just been 13th month for my razr
never rooted or flashed ...
just updated to ICS from stock GB via usb data cable as update was in my country
I purchase a new microSIM & also did a data / factory rest from phone boot option ( u know from tht recovery option comes after rebooting in boot seq mode) to solve the problem but no positive result ... though i found one thing if u go to settings -> more -> mobile networks-> select network ... there you'll find 3 option
1) 2G only
2) 3G only
3) automatic default
well by 1st option works it given me range ... doesn't show no service or emergency calls but 2nd & 3rd option gives me same problem " NO SERVICE " or " EMERGENCY CALL "
sys version -
673.943.328.XT910.AsiaRetail.en.03
firmware version -
GAS_ASIA_USASPDRICSIRD_P021
i m worried if its really sim card jacket problem ...
hey faheemakbar18 how much time & money it took to fix that problem
I dont think its the problem of sim jack. Just go to dialer then *#*#4636*#*# then to phone info then hit menu key select radio band & choose option to automatic.. Hope this helps you.. I had same issue when I chose US BAND
XT910
3n3rg1c said:
I dont think its the problem of sim jack. Just go to dialer then *#*#4636*#*# then to phone info then hit menu key select radio band & choose option to automatic.. Hope this helps you.. I had same issue when I chose US BAND
Click to expand...
Click to collapse
Hi. I have XT910 for more than two years. After brought the phone from Australia to Hong Kong (use Hong Kong SIM card) and back to Australia (replace SIM card with Aus one), I have the same problem as you. Phone can make voice call, but no mobile data connection (3G, 2G).
Want to know if your problem is fixed or not?
I once had an issue like this on my xt910 gsm and I found a way to fix it
Murphyung said:
I once had an issue like this on my xt910 gsm and I found a way to fix it
Click to expand...
Click to collapse
Hi. Can you tell me how to fix the issue: no mobile data, and phone saying "Syncing SIM card contacts"? Thanks.

Categories

Resources