help! as I can extract the modem.bin file from a custom rom to install another rom?
Bit hard for anyone to help you when you're being vague. It's not rocket surgery; download rom, unzip, use 7Zip/IZarc/whatever to extract modem.bin from rom tar.
danixbox said:
help! as I can extract the modem.bin file from a custom rom to install another rom?
Click to expand...
Click to collapse
Your question isn't clear. For what reason do you want to extract a modem to then install another rom? there is no relation between. So just give us a bit more infos about your wish/problem, so it will be helpful for both sides then.
the problem is that with a rom everything goes very fast and stable but the signal coverage and fail. in the other rom is slow but has good signal coverage, my desire is to pass this modem.bin for fast and stable rom
Okay then.yes this should be possible. Look for the modem you have in the good signal rom. You find it in settings info baseband.
You will find this baseband in the internet somewhere for download. Then flash it with odin as phone over the download mode. If you extract the file you will be also able to only flash the modem.
Gesendet von meinem GT-P5110 mit Tapatalk 4
Related
Hi guys.
Here's a little update what i've done with my phone.
Last night i have flashed ICS KP8 through ODIN.
I have reverted to GB this morning 2.3.5 and now i want to flash my stock firmware 2.3.4 I9100XWKI4 (TWO).
I have downloaded the desired ROM (I9100XWKI4_I9100XXKI1_I9100OXFKE1_HOME.tar.md5) from SAMMMOBILE but when i extracted it it only contains 1 file of size 539MB.
So...this is my question...where am i supposed to put that file in ODIN and do i need something else or just this file?
Tnx in advance
Follow instructions from the firmware provider makes sense .
No idea whats in the file from another forum .
Usual is to flash tar via PDA .
jje
Charlie Wax said:
Hi guys.
Here's a little update what i've done with my phone.
Last night i have flashed ICS KP8 through ODIN.
I have reverted to GB this morning 2.3.5 and now i want to flash my stock firmware 2.3.4 I9100XWKI4 (TWO).
I have downloaded the desired ROM (I9100XWKI4_I9100XXKI1_I9100OXFKE1_HOME.tar.md5) from SAMMMOBILE but when i extracted it it only contains 1 file of size 539MB.
So...this is my question...where am i supposed to put that file in ODIN and do i need something else or just this file?
Tnx in advance
Click to expand...
Click to collapse
Maybe it's a one part .tar file? (Just to put in PDA)
Pls write the name of file here.
But to get sure, download the firmware, u want, from here:
http://forum.xda-developers.com/showthread.php?t=1075278
Flash like instruction says and all should be fine
PS: If u want to be sure what's on with downloaded file, pls complete name...
CHEERS
Tar.md5 "one big file" roms just go in the PDA slot and Odin will work it out.
The md5 bit just means that Odin will do a checksum to make sure the file isn't corrupt, so no need to extract it.
Also make sure you flash the GB bootloaders first, available in the thread linked above
Sent from my GT-I9100 using Tapatalk
Hannibal226 said:
Maybe it's a one part .tar file? (Just to put in PDA)
Pls write the name of file here.
But to get sure, download the firmware, u want, from here:
http://forum.xda-developers.com/showthread.php?t=1075278
Flash like instruction says and all should be fine
PS: If u want to be sure what's on with downloaded file, pls complete name...
CHEERS
Click to expand...
Click to collapse
The name of a zip. file is I9100XWKI4_I9100OXFKE1_TWO.zip. Exctracted file name is writen in OP.
P.S. do i need to tick repartition?
veyka said:
Tar.md5 "one big file" roms just go in the PDA slot and Odin will work it out.
The md5 bit just means that Odin will do a checksum to make sure the file isn't corrupt, so no need to extract it.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Hold on a sec...you want to say that i don't have to extract it all...
Damn...is it possible that Windows recognized it as zip. file
Charlie Wax said:
The name of a zip. file is I9100XWKI4_I9100OXFKE1_TWO.zip. Exctracted file name is writen in OP.
P.S. do i need to tick repartition?
Click to expand...
Click to collapse
You will not need to put a pit in or repartition
Sent from my GT-I9100 using Tapatalk
Charlie Wax said:
Hold on a sec...you want to say that i don't have to extract it all...
Damn...is it possible that Windows recognized it as zip. file
Click to expand...
Click to collapse
I don't know, I would just download a rom from intatechs thread and follow his guide.
Sent from my GT-I9100 using Tapatalk
veyka said:
I don't know, I would just download a rom from intatechs thread and follow his guide.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Can't find it on inratech's pages...
Well...WTH...i'll try it...wish me luck LOL
If I'll delete the modem file from the any ROM's zip file, it will install everything fine except the modem?
Same thing with the kernel file into the zip?
There is no problem to delete the modem file (where is kernel file @ the zip?) and flash it without modem - cuz I want to keep the modem I've got instead of flashing again the modem.....
thanks!
I assume you are talking about stock firmware here.
PsyOr said:
If I'll delete the modem file from the any ROM's zip file, it will install everything fine except the modem?
Same thing with the kernel file into the zip?
There is no problem to delete the modem file (where is kernel file @ the zip?) and flash it without modem - cuz I want to keep the modem I've got instead of flashing again the modem.....
thanks!
Click to expand...
Click to collapse
Not absolutely sure but this should work. However it is probably better or easier to go the other way: flash the entire firmware and then revert to the kernel/modem you prefer. Kernels and modems can be individually downloaded either to be flash with CWM or ODIN.
The kernel of a stock firmware can be found in the corresponding I9100_CODE.... tar file. If you look into this tar you will find a file named zImage, this is the kernel.
Thanks mate, I'm talking about a custom ROM (AOKP based)
if its possible to do this ,,, ?
[VIA CWM]
If you flash a custom rom and you end up with a modem you don't like you can re- flash preferred modem separately after you have installed the ROM. There are several threads here that have many downloadable modems to choose from. All the best.
Sent from my GT-I9100 using xda premium
HANDSY said:
If you flash a custom rom and you end up with a modem you don't like you can re- flash preferred modem separately after you have installed the ROM. There are several threads here that have many downloadable modems to choose from. All the best.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
yeah, i know mate, but just curious to avoid this action (of flashing other modem again, even though its a pice of cake) if i'll delete the modem.bin file from the ROM's zip file // or kernel file .... if it will flash the ROM without any issue (without the modem/kernel file that i've deleted from the zip)
I see, I'm sorry I can't advise you on that as I'm a noob myself and have not started at altering ROMs prior to flashing. Sorry.
Sent from my GT-I9100 using xda premium
And why delete and not replace it?
Odoslané z GT-I9100 cez Tapatalk 2
Stileth said:
And why delete and not replace it?
Odoslané z GT-I9100 cez Tapatalk 2
Click to expand...
Click to collapse
because my current modem is just fine, i see no reason to change it [and the ROM comes with other modem]
PsyOr said:
If I'll delete the modem file from the any ROM's zip file, it will install everything fine except the modem?
Same thing with the kernel file into the zip?
There is no problem to delete the modem file (where is kernel file @ the zip?) and flash it without modem - cuz I want to keep the modem I've got instead of flashing again the modem.....
thanks!
Click to expand...
Click to collapse
Most roms do not include a modem. (Well all the proper roms). And like previously stated, just take note of what modem you have and just reflash it in cwm recovery.
Sent from my Nexus 7 using xda premium
PsyOr said:
If I'll delete the modem file from the any ROM's zip file, it will install everything fine except the modem?
Same thing with the kernel file into the zip?
There is no problem to delete the modem file (where is kernel file @ the zip?) and flash it without modem - cuz I want to keep the modem I've got instead of flashing again the modem.....
thanks!
Click to expand...
Click to collapse
as kilometers4 said most custom roms do not include modem
i just knw 1 aokp based rom that includes a modem ie : Resurrection Remix Rom By Westcrip
...
also if u delete the modem from the zip make sure u remove it from the updater script too
PsyOr said:
because my current modem is just fine, i see no reason to change it [and the ROM comes with other modem]
Click to expand...
Click to collapse
I meant to replace it inside of the ROM package.
Odoslané z GT-I9100 cez Tapatalk 2
hi i need to know if there is a:
1.- cm9.zip that comes without modem for a i9300.
2.- in .zip files where to locate the modem or radio file.
3.- is there any custom ics that comes pda and csc only for zip or odin?
thank you very much indeeed
atv
atv said:
hi i need to know if there is a:
1.- cm9.zip that comes without modem for a i9300.
2.- in .zip files where to locate the modem or radio file.
3.- is there any custom ics that comes pda and csc only for zip or odin?
thank you very much indeeed
atv
Click to expand...
Click to collapse
Actually can i know what are u trying to do?
Arr u trying to flash custom rom?
yes
thanks for your answer
but i don't want the rom as cm9 to flash the modem.
or where can i locate in a rom (custom zip not 1pack tar) the modem.bin
thanks again
atv
Man, cm roms never bring modem. Modem is a Sammy thing.
You should read and search a bit. There is a full thread about modems, csc with all you need inside.
My god this is noob central here isnt it???
Just open the zip and remove the modem.bin. there you go.
Sent from my GT-I9300 using xda premium
Hi guys,
I'm new here, sorry if this isn't the right place...
I'm a GS3 owner and just flashed the ROM I9300XXDLJ5_I9300ODDDLI7_INU.
I would like to flash the SpeedMod kernel but before doing that I need to know how do I install the stock kernel if needed.
Can you point to the right direction?
Thank you
If you make a backup, resorting the backup will also restore the kernel
I did, but I don't want to restore the whole thing... all I want is to restore the kernel if needed.
Tell me, extract boot.img from India ROM and make a new .tar with this single file will work?
Thank you
McBacker said:
I did, but I don't want to restore the whole thing... all I want is to restore the kernel if needed.
Tell me, extract boot.img from India ROM and make a new .tar with this single file will work?
Thank you
Click to expand...
Click to collapse
Try to search forum or Google to find your stock kernels flashable zip or tar . Download it.. it will works. But pay attention to ICS / JB difference.. flash right kernel.
Sent from my GT-I9300 using xda premium
you could also extract it from the ROM's file and flash it I guess.
Thank you guys.
Extracted boot.img from Sammy Indian Rom and made a new .Tar using S3 Toolkit.
Regards
i can get to download mod only with the JIG,
i cant get to RECOVERY.
in download mode i can install kernel, but i have no access to recovery.
when-ever i get to nand r\w it fails.
what can i do ?
can someone help me save my phone ?
http://forum.xda-developers.com/showthread.php?t=1457458
i saw that
boki9999 said:
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
OK i KNOW
but it didn't help me
the files that are there are corrupt.
and the instructions they don't match, i don't know what to do there.
anyone knows how or where
anyone knows how or where can i download new recovery+kernel+pit file ?
or at least point me to the right files for me ?
coz in the mentioned thread the pit file is in the GB section and the recovery pack that i think i need'
are in the ics section and the kernel for the ICS is corrupt so i cant use it.
or is it ok to use syiah kernel instead ?
my problem is when i try to install new ROM it stops when trying to write the nand part.
Yiu going to have to download the whole rom and flash with odin
Sent from my GT-N7100 using xda premium
more details please
[email protected] said:
Yiu going to have to download the whole rom and flash with odin
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
thank you!!
how do i do that ?
what ROM should i download ?
can you please give me more details ?
i can flash with Odin but WHAT i need to flash i don't know ..
Put any firmware stock or custom to pda, dont touch anything else. Firmware must by .tar or .md5.
Here you can find roms http://forum.xda-developers.com/showthread.php?t=1529173 or stock on sammobile.com.
All answers to your questions are here http://forum.xda-developers.com/showthread.php?t=1826497
you dont understand
grisoxxl said:
Put any firmware stock or custom to pda, dont touch anything else. Firmware must by .tar or .md5.
Here you can find roms http://forum.xda-developers.com/showthread.php?t=1529173 or stock on sammobile.com.
All answers to your questions are here http://forum.xda-developers.com/showthread.php?t=1826497
Click to expand...
Click to collapse
thank you for your help but.
i tried this, cant flash a rom trough odin dont know why -something about the nand
If you are stuck at nand write whatever you have tried, i think its corrupted and its time to change your motherboard... This happened to another guy earlier on...
Sent from my potato running a potato.
Have your problem been fixed ?
Sent from my GT-I9100 using xda app-developers app
If you get a nand flashing error, then just use correct pit plus repartition marked... in most cases it is enough to just flash pit area, plus of cause a stock rom
Sendt fra min GT-I9300 med Tapatalk2