mark,
I have messed up my device. It has phil recovery on in and beans b7 version in there. I can boot into recovery but every time after beansintall it kicks me back into download mode. I have done a twrp like backup using phil recovery but I get and error ( is prob corrupted),
Any ideas how to bring this back to life? I have an MI1 version on it. with a Y it was.
Maybe there is an aroma setting in which I can flash and boot.
Any odin tar images?
I have tried the tar below but it cannot get the aboot.
thanks
http://forum.xda-developers.com/showthread.php?t=2483619
abe_cedar said:
mark,
I have messed up my device. It has phil recovery on in and beans b7 version in there. I can boot into recovery but every time after beansintall it kicks me back into download mode. I have done a twrp like backup using phil recovery but I get and error ( is prob corrupted),
Any ideas how to bring this back to life? I have an MI1 version on it. with a Y it was.
Maybe there is an aroma setting in which I can flash and boot.
Any odin tar images?
I have tried the tar below but it cannot get the aboot.
thanks
http://forum.xda-developers.com/showthread.php?t=2483619
Click to expand...
Click to collapse
Do you have a developers edition S4? Did you flash any other odin tars? Whats the odin failure message?
Sent from my SCH-I545 using XDA Premium 4 mobile app
dev edition
Surge1223 said:
Do you have a developers edition S4? Did you flash any other odin tars? Whats the odin failure message?
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes it is a developer. I have tried only the tar in the link above. it did not get pass aboot.bin and some other file.
the recovery is intact and I have beans b7 rom in a zip on the phone. I was hoping that maybe there is an aroma combination I can use.
Also in Phil's cwm there is the option to disable the loki at the dev ed does not need this.
I was wondering if there are any factory tars out there for the dev edition
thanks
abe_cedar said:
Yes it is a developer. I have tried only the tar in the link above. it did not get pass aboot.bin and some other file.
the recovery is intact and I have beans b7 rom in a zip on the phone. I was hoping that maybe there is an aroma combination I can use.
Also in Phil's cwm there is the option to disable the loki at the dev ed does not need this.
I was wondering if there are any factory tars out there for the dev edition
thanks
Click to expand...
Click to collapse
No there isn't. What was the error message on aboot? Try flashing another rom in recovery.
Surge1223 said:
No there isn't. What was the error message on aboot? Try flashing another rom in recovery.
Click to expand...
Click to collapse
How do I push the zip in there. There is no adb for samsung devices
which rom do you recommend?
thanks
Put it on your micro sdcard. Any rom. I dont use roms so I cant recommend one.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Related
I installed twrp2 on my I717 Galaxy Note and want to return back to CWM. Does anyone know how to do this? I have all my backups in CWM and want to go back.
Please Help
Just put CWM.zip on ur sd card and flash it.
Twrp should be replaced with CWM.
Sent from my SGH-I717M using xda app-developers app
or just flash through rom manger...its the lastest crw recovery..it will work..I just installed twrp and can still go back to crw thru rom manager
wish777 said:
or just flash through rom manger...its the lastest crw recovery..it will work..I just installed twrp and can still go back to crw thru rom manager
Click to expand...
Click to collapse
Just did exactly this ^^^^^^ last night after playing around with CM10. Scary to say the least but I did it!
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
dakleenupman said:
Just did exactly this ^^^^^^ last night after playing around with CM10. Scary to say the least but I did it!
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
I found cwm sketchy with backups and switched back to braways. I had cwm touch installed and ROM manager(finally supported) but the issues were too many.
I found using "flash touch recovery" from my tools in aospxxx works nicely.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
id_mew said:
Just put CWM.zip on ur sd card and flash it.
Twrp should be replaced with CWM.
Sent from my SGH-I717M using xda app-developers app
Click to expand...
Click to collapse
How is this done? I have it on my SD card, but get an error if I tap to install...
An error you say?
That's specific...
What....error?
studacris said:
An error you say?
That's specific...
What....error?
Click to expand...
Click to collapse
You are right! I should have been more specific! I know better! The error is: "No applications can perform this action."
Are you sure that's a recovery flashable zip, and not just a zipped up .tar package for Odin?
studacris said:
Are you sure that's a recovery flashable zip, and not just a zipped up .tar package for Odin?
Click to expand...
Click to collapse
The file contains a directory called META-INF and recovery.img...
That's for recovery, the Mets-inf folder is the script to write the recovery.img
That's weird, You may try downloading the zip fresh, or if ask else fails grab the Odin flashable tar and use that.
studacris said:
That's for recovery, the Mets-inf folder is the script to write the recovery.img
That's weird, You may try downloading the zip fresh, or if ask else fails grab the Odin flashable tar and use that.
Click to expand...
Click to collapse
Now, I can run TWRP and run it from there without any ill effects (meaning, a bricked phone!), yes?
Yup.
Given you download the correct file for this device.
If that still fails, which I dunno why I would, it should go without saying The Odin file, will need Odin a pc and a Usb cable
studacris said:
Yup.
Given you download the correct file for this device.
If that still fails, which I dunno why I would, it should go without saying The Odin file, will need Odin a pc and a Usb cable
Click to expand...
Click to collapse
Thanks for all of your help so far! Please forgive the noob question, but where do I find the file you're referring to? I have Odin and the proper cable...
http://forum.xda-developers.com/showthread.php?t=1584576
That has the Odin flashable cwm touch file... that version is outdated so after flashing that, you'll have cwm, but flashing a newer Rom zip might end up with a "status 7 error" in recovery.
At that point I'd personally use goo manager go grab the latest version of a cwm zip, that'll be usable in the version of cwm I posted above.
studacris said:
http://forum.xda-developers.com/showthread.php?t=1584576
That has the Odin flashable cwm touch file... that version is outdated so after flashing that, you'll have cwm, but flashing a newer Rom zip might end up with a "status 7 error" in recovery.
At that point I'd personally use goo manager go grab the latest version of a cwm zip, that'll be usable in the version of cwm I posted above.
Click to expand...
Click to collapse
Are you saying I should _not_ use TWRP to put CWM on?
No, it should work, just saying if it still gives you the proverbial finger, Odin is your friend and that version is just the latest with an Odin .tar
So to have your cake (cwm) and eat it too (flash new roms) you'll need to update your recovery from that older version of cwm
So you said you get an error when you tap to install? You should be flashing that zip in recovery like you would a ROM or mod. Is that what you did? After it installs just reboot recovery within twrp and bam!!! You'll have cwm.
Thanks so much for your help...my problem remains, so I may go back to a stock ROM for T-Mobile, since that is my provider, and see if I can solve it... Before I installed CWM, I could sms/mms to my e-mail address...I can't any longer.
Soooooo, let me tell you whats going on I rooted my phone (Worked fine)..... Then I went to install Hotspot (Failed) And my phone was stuck on the Sprint screen. So I tried to throw a rom on it and it (failed). Now I'm trying to use Odin to go back to Stock and I'm getting "MD5 hash value is invalid" I need HELP!!!!! lol
Check the MD5 of whatever tar you are trying to flash. Josh's MI5 has a MD5 posted so you can check to make sure the d/l went through properly. Alternatively, you might want to flash the latest version of TWRP in Odin and immediately boot into recovery before the phone reboots
Sent from my SM-N900P using XDA Premium 4 mobile app
SantinoInc said:
Check the MD5 of whatever tar you are trying to flash. Josh's MI5 has a MD5 posted so you can check to make sure the d/l went through properly. Alternatively, you might want to flash the latest version of TWRP in Odin and immediately boot into recovery before the phone reboots
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have TWRP on there and I've tried Josh's Rom it didn't work and I've tried several Tar files
You can get into TWRP w/o a problem? If so, what happens when you try to flash a rom or restore a backup?
Sent from my SM-N900P using XDA Premium 4 mobile app
SantinoInc said:
You can get into TWRP w/o a problem? If so, what happens when you try to flash a rom or restore a backup?
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
When I try to flash a rom it fails
So you can get into download mode and you can get into TWRP but when you try to flash a MI3/MI5 tar in Odin it will not go through...and you are sure that the tar files are not corrupt?
And the rom zips are definitely not corrupt that you are flashing in TWRP?
I would say that if you can access TWRP and still get into Download mode you are not bricked. I would PM Josh or Freeza and ask them for advice.
Sent from my SM-N900P using XDA Premium 4 mobile app
SantinoInc said:
So you can get into download mode and you can get into TWRP but when you try to flash a MI3/MI5 tar in Odin it will not go through...and you are sure that the tar files are not corrupt?
And the rom zips are definitely not corrupt that you are flashing in TWRP?
I would say that if you can access TWRP and still get into Download mode you are not bricked. I would PM Josh or Freeza and ask them for advice.
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well apparently I can't get into twrp anymore not sure whats going on
averymlewis said:
Well apparently I can't get into twrp anymore not sure whats going on
Click to expand...
Click to collapse
I would ODIN TWRP again and uncheck auto reboot. Then manually boot into twrp and try flashing a rom again or restoring a backup.
You need to have a rom or a nand on your internal or external storage. Flash twrp via Odin and immediately go into recovery and flash the new rom or nand. That will get you back and running. Remember, after you flash twrp you need to hold the vol up/power/home buttons as soon as you hear the disconnect sound on your pc. Good Luck!
Friends, now I had hit a simple issue. Downloaded PA ROM 4.45 from official site itself(for my I9300 itself). Tried to install it using CWM(v 6.0.3.2), but there comes 'status 7' error.
1. What should I do now?
2. Actually, does this PA ROM comes with GAPPS or should I download it again?
Thanks in advance.
@Sarun said:
Friends, now I had hit a simple issue. Downloaded PA ROM 4.45 from official site itself(for my I9300 itself). Tried to install it using CWM(v 6.0.3.2), but there comes 'status 7' error.
1. What should I do now?
2. Actually, does this PA ROM comes with GAPPS or should I download it again?
Thanks in advance.
Click to expand...
Click to collapse
You need gapps and you need to update recovery,it's outdated.(that is error 7)
Sent from my GT-I9300 using XDA Free mobile app
Stevica Smederevac said:
You need gapps and you need to update recovery,it's outdated.(that is error 7)
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Updating CWM, how should it be done. Is it through ROM manager or anything else?
Thanks for your reply.
@Sarun said:
Updating CWM, how should it be done. Is it through ROM manager or anything else?
Thanks for your reply.
Click to expand...
Click to collapse
https://www.clockworkmod.com/rommanager
Download from here and flash via recovery(if it's zip) or Odin if it's in .tar format.
Sent from my GT-I9300 using XDA Free mobile app
@Sarun said:
Updating CWM, how should it be done. Is it through ROM manager or anything else?
Thanks for your reply.
Click to expand...
Click to collapse
You can either flash via odin/heimdall (.tar) or flash the .zip in recovery. You just need the latest version of the recovery of your liking in either form.
Thanks friends. I will try it
By the way when you mean flash through recovery means. How? By using app like Flasher? Is it .tar or .tar.md5 for Odin? And also what it actually does is overwriting the old recovery. Right?
@Sarun said:
By the way when you mean flash through recovery means. How? By using app like Flasher? Is it .tar or .tar.md5 for Odin? And also what it actually does is overwriting the old recovery. Right?
Click to expand...
Click to collapse
1) Just boot into recovery and choose "install zip" (or similar depending on the recovery you use), choose the zip file and confirm
2) Both .tar and .tar.md5 are fine
3) Yes it does overwrite the old one
I hope when flashing through Odin, auto reboot and f.reset time is to be checked.
ODIN didn't work, Can I use ROM Manager
Hawaiihemd said:
1) Just boot into recovery and choose "install zip" (or similar depending on the recovery you use), choose the zip file and confirm
2) Both .tar and .tar.md5 are fine
3) Yes it does overwrite the old one
Click to expand...
Click to collapse
Flashing through ODIN didn't replace the older CWM . What should I do now? Can I just use ROM Manager to update it?
@Sarun said:
Flashing through ODIN didn't replace the older CWM . What should I do now? Can I just use ROM Manager to update it?
Click to expand...
Click to collapse
Download Rashr from the PS and try to flash TWRP or Philz Recovery with that.
Galaxy S3 International
efeXTREME Lite Rom v5.1
Arter97 Kernel v4.0 beta 3
just thought id put this up since i haven't seen it posted.
this is the full OD3 stock Rom tar.MD5 file
it is odin Flashable.
I will warn you alot of people are saying once they upgraded to this bootloader they couldnt get OA6 roms to flash so beware.
any download mirrors would be appreciated
Here is another link but this one you have to unzip then use Odin to flash the tar file inside thanks
http://forum.xda-developers.com/showthread.php?p=61215093
download
use odin 3.10.6 but i believe 3.10.0 will work also
put the file in the AP slot and flash
you will most likely lose root but here it is any way
https://onedrive.live.com/redir?resid=cd08ce789eb6b040!141
It should be noted that if anyone flashes this firmware they will NOT be able to flash back to a previous firmware.
i will also note that some people could gain root with chainfire and flash custom recovery through odin then restore backups of OA6 but again beware
http://forum.xda-developers.com/showpost.php?p=60960196&postcount=19
Robalboa said:
i will also note that some people could gain root with chainfire and flash custom recovery through odin then restore backups of OA6 but again beware
http://forum.xda-developers.com/showpost.php?p=60960196&postcount=19
Click to expand...
Click to collapse
Wasn't sure about chainfire's root method on this version since I'm not running it, so hopefully it still works. @Ramer has uploaded this as well to a file hosting site so if he doesn't see this, ask him for a link for his download link so you can add a mirror site to the OP as an alternate if you like.
tdunham said:
Wasn't sure about chainfire's root method on this version since I'm not running it, so hopefully it still works. @Ramer has uploaded this as well to a file hosting site so if he doesn't see this, ask him for a link for his download link so you can add a mirror site to the OP as an alternate if you like.
Click to expand...
Click to collapse
Here the file I put up on AFH: https://www.androidfilehost.com/?fid=23991606952615017
I have to question the title of this thread though. This is NOT flashable in recovery. It's the zip file that must be unzipped on a PC and then Odin the tar file. It's the original one from Sammobile.
The OP gives correct instructions, I just think the word flashable is bound to confuse someone.
Ramer said:
Here the file I put up on AFH: https://www.androidfilehost.com/?fid=23991606952615017
I have to question the title of this thread though. This is NOT flashable in recovery. It's the zip file that must be unzipped on a PC and then Odin the tar file. It's the original one from Sammobile.
The OP gives correct instructions, I just think the word flashable is bound to confuse someone.
Click to expand...
Click to collapse
thanks for the mirror it says right in the OP "Odin" flashable
also in the instructions it says to open odin use the ap slot etc
plus if anyone tried to recovery flash it would just fail, no damage done
thanks
Robalboa said:
thanks for the mirror it says right in the OP "Odin" flashable
also in the instructions it says to open odin use the ap slot etc
plus if anyone tried to recovery flash it would just fail, no damage done
thanks
Click to expand...
Click to collapse
You are correct. It's probably just my hesitation to using the word flashable and odin at the same time. I've lost count of how many users see a zip and think "I'll flash this"
Tried this and I still show BOA6 software and baseband ? Also after I installed it on odin I didnt like it much so I was able to flash MOAR after I flashed OD3. weird
Can we please get screenshoots??
Sent from my SM-G900P using XDA Free mobile app
Already installed MOAR 6.2 .
Son Rise said:
Can we please get screenshoots??
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
Looks exactly like BOA6. They just added some extra security features like activation lock to the security settings.
Sent from my SM-G900P using xda premium
Son Rise said:
Can we please get screenshoots??
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
its pure stock OD3 . virtually the same as Oa6 with a few slight changes
philiptibbs said:
Tried this and I still show BOA6 software and baseband ? Also after I installed it on odin I didnt like it much so I was able to flash MOAR after I flashed OD3. weird
Click to expand...
Click to collapse
Pull your battery out. wait a few seconds. put battery back and boot into odin/download mode. vol down+home+power
then odin the tar
it will work
Had the same problem, wasn't able to flash back to BOA6 using odin had to flash OD3 to get the phone back and running
not sure about rooting, but my hotspot is still enabled from previous root that i loss when updating to OD3
You can still flash OA6 roms as.long.as.you have a custom recovery and.root
Sprint GS5 Moars 6.2
link is dead?
Try the first link
Sprint GS5 Moars 6.2
Is there a root method for this? chainfire didn't work for me and it wont let me install TWRP? keep saying fail
thanks in advance
eric303 said:
Is there a root method for this? chainfire didn't work for me and it wont let me install TWRP? keep saying fail
thanks in advance
Click to expand...
Click to collapse
Yes. Once flashed don't reboot. Pull the battery and go back into download mode and flash twrp. Img in the ap slot
You can find the file at Moars op under recovery and odin
After you flash the custom recovery image pull battery boot into recovery from recovery hit reboot. It will then prompt you that there's no root and would you like to root. Choose yes. Tada
Sprint GS5 Moars 6.2
I did as instructed, but the TWRP that i loaded did not ask for a root option, it did some updates, then it automatically reboots the phone, I pull the battery, then reboot it back into recovery again, and reboot it back into recovery from the recovery screen, it ask me to install super user, i say yes, then reboot back into system now it has a icon that says Superuser installer, I click on it and choose TWRP, gives me error
I am having Android System Recovery 3e, on my Samsung Galaxy S3. Do you to this I am not able to flash any ROMs. Can someone advice?
Ratish K said:
I am having Android System Recovery 3e, on my Samsung Galaxy S3. Do you to this I am not able to flash any ROMs. Can someone advice?
Click to expand...
Click to collapse
Use Odin to flash a custom recovery such as twrp. Then use twrp recovery to install custom ROMs.
Sent from my XT1609 using Tapatalk
I tried using Odin 3.10.7 to flash the twrp, but, it is not working, any further suggestions. I read something about an MD5 file....what is it....do I need that
Rraayy8 said:
I tried using Odin 3.10.7 to flash the twrp, but, it is not working, any further suggestions. I read something about an MD5 file....what is it....do I need that
Click to expand...
Click to collapse
What error did you get? If you could, post screenshots so that I can see the process and errors.
Sent from my XT1609 using Tapatalk
RealWelder said:
What error did you get? If you could, post screenshots so that I can see the process and errors.
Click to expand...
Click to collapse
There are no errors, as such, I flashed the twrp recovery 6.0.2 . Then it rebooted, i tried to get into recovery, but, it didnt work.
Earlier I had used odin 1.85 . This time I used odin 3.10.7 .