REPAIR YOUR X 10I
FILES YOU NEED::http://www.mediafire.com/download/tdg4dho2bwq6fg5/X10i_3.0.1.G.0.75_only%20kernel_baseband.ftf
http://www.mediafire.com/download/vy4v24ditk4lsxa/Xperia_X10i_3.0.1.G.0.75_GLOBAL-GGL_GENERIC_1232-9897.rar
http://www.mediafire.com/download/0pgnz7iy2yq4iae/FlashTool_0.2.9.1-GBready_root_xRec.exe
INSTRUCTIONS IS HERE
http://forum.xda-developers.com/showthread.php?t=2570671
PLEASE BEFORE YOU START PUT YOUR PHONE ON CHARGER 3-4 HOURS
PRESS THANX IF HELPED
I tried using your solution but every time I failed to connect my X10 to flash mode. Unplug the USB, take out put back the battery of my phone, press the back button on the phone and plug in USB but nothing comes out and just showing 19/025/2013 04:25:24 - INFO - Searching Xperia....
19/025/2013 04:25:24 - ERROR - Please plug you device in flash mode many many times. My phone battery was fully charge with 5 hours. Any solutions with this?
answer
try this: plug your cable in computer but dont conect your phone,then open flash tools,run flash and chose x 10 i baseband and kernel only ftf,then flash tools will ask you for conect your phone in flash mode.then pull batery of your phone and wait 1 minute,pull batery in,hold back button and conect usb in phone.the phone should be in the flash mode and start flashing.I repared 2 xperia x 10 that were compleatly dead,seus,pc companion and flash tools dont recognize it and only blinking red,no boot up,no bootloop, no power on, nothing helped
noob hacker said:
try this: plug your cable in computer but dont conect your phone,then open flash tools,run flash and chose x 10 i baseband and kernel only ftf,then flash tools will ask you for conect your phone in flash mode.then pull batery of your phone and wait 1 minute,pull batery in,hold back button and conect usb in phone.the phone should be in the flash mode and start flashing.I repared 2 xperia x 10 that were compleatly dead,seus,pc companion and flash tools dont recognize it and only blinking red,no boot up,no bootloop, no power on, nothing helped
Click to expand...
Click to collapse
I tried this before but still can't connect my phone to flash mode.
Hikigaya Hachiman said:
I tried this before but still can't connect my phone to flash mode.
Click to expand...
Click to collapse
send me a phone,I will fix it and sent you back.....write me message pm
noob hacker said:
send me a phone,I will fix it and sent you back.....write me message pm
Click to expand...
Click to collapse
I think i can't send you because im at Malaysia and thats not my phone.
some questions
Hikigaya Hachiman said:
I think i can't send you because im at Malaysia and thats not my phone.
Click to expand...
Click to collapse
Hi,
I have some confirmation questions:
Which ROM ftf do you have, which was the original baseband on the phone? Maybe check in STOCK ROM list for a better suited ROM.
I have better experiences when connecting the other way round: plug the cable into the phone and connect either at the computer or into a short usb-extender cable in convenient reach.
When doing it the other way round, I have often 'timing problems' to fiddle the usb micro into the socket at the phone.
Maybe try another cable and/or carefully press the plug to the phones frontside to prevent connection problems.
Alexej
Related
When i try to connect the phone to a flash mode via usb cable (holding the back boton and conneckting the cable at the same time) the phone just go into offline charging mode? A try other pc over usb cable not helps?
That's the normal condition if you plug the usb cable in while holding the back button, it will go into offline charging mode,
the question is, what are you trying to do ?
Flashing using Flash tool ? if so you have to follow the steps of flashing, 1st use the flash tool and when it says "turn off your phone and then hold you back button while plug the usb cable in" then you are suppose to do it !
zmbutt said:
That's the normal condition if you plug the usb cable in while holding the back button, it will go into offline charging mode,
the question is, what are you trying to do ?
Flashing using Flash tool ? if so you have to follow the steps of flashing, 1st use the flash tool and when it says "turn off your phone and then hold you back button while plug the usb cable in" then you are suppose to do it !
Click to expand...
Click to collapse
Yes dats am trying to do. The drivers is instaled 100% Wen a hold the back boton and connekt the usb cable the green light flashes one time and den noting the pfone goes into offline charging mode. http://www.youtube.com/watch?v=_v3MjErfhug&feature=plcp
the cable is too long :O
use the latest flash version,
turn off the phone, take out the battery for 30 seconds and then try again.
zmbutt said:
the cable is too long :O
use the latest flash version,
turn off the phone, take out the battery for 30 seconds and then try again.
Click to expand...
Click to collapse
1 I'm tray with 3 other seuss original cables nothing changes
2 at the moment i'm with the latest
3 dont helps
it seems like, Flash tool cannot communicate with your phone, and the only thing which need to check is "Driver" you need to recheck the correct drivers for flash tool !
zmbutt said:
it seems like, Flash tool cannot communicate with your phone, and the only thing which need to check is "Driver" you need to recheck the correct drivers for flash tool !
Click to expand...
Click to collapse
On the 3 pc were im trying do to it the drivers are 100% good and the flash tool to. With the original SEUS program seus-update the results are the same? For me this is a hardware problem with the phone ? I'm using the trivers with comes with flash tool.
Turn off your firewall and antivirus
mpiekp said:
Turn off your firewall and antivirus
Click to expand...
Click to collapse
10x but the this don't helps
zmbutt said:
That's the normal condition if you plug the usb cable in while holding the back button, it will go into offline charging mode
Click to expand...
Click to collapse
Actually, no, it's not.
Green led should light and no offline charge should start.
Yes but the green light only 1 time flashes for 1 sek and disappears. Then the phone is going to offline charging mode..
any ideas what to do ?
Hi
I have xperia neo v 11wxx
- performed unlock with test point (paid service) - all went ok
- flashed new soft with CWM - all went ok - flashed kernel in zip ICS_Spacious_Smooth_Light_ODEX_v2
After flashing phone stays at SE logo nothing happens
I Can't enter fastboot and flashboot mode
in fastboot the diode flashes blue for a sec and nothing happens
in flashboot (flashtool or companion or suse or manul) nothing happens
The phone is not detected properly (in flashtool i have to select my model manual) in companion it say "null"
In flashtool after manual selection it says that the phone flash is emty (no files in /system folders etc) no root ........
In s1tool after identify it gives some usb device error and missing file.
Iv also tried 3 diffrent computers (win8 - with driver signing off, 1x xp laptop , 1x win 7 laptop)
Tried diffrent drivers and diffrent cables
It look like kernel problem. Did you flash a kernel from zip package rom?
When you will want enter to fastboot mode turn off you device and put menu button and now connect phone to PC.
----------------------
Sorry for my bad English
tgrobi said:
It look like kernel problem. Did you flash a kernel from zip package rom?
When you will want enter to fastboot mode turn off you device and put menu button and now connect phone to PC.
----------------------
Sorry for my bad English
Click to expand...
Click to collapse
Yes iv flashed kernel from zip
I cannot enter fastboot (like i said blue led diode flashes and notthing happens)
The problem with fastboot started right after unlocking with testpoint.
Can you write what Rom you flashed?
tgrobi said:
Can you write what Rom you flashed?
Click to expand...
Click to collapse
ICS_Spacious_Smooth_Light_ODEX_v2
abaddon6661 said:
ICS_Spacious_Smooth_Light_ODEX_v2
Click to expand...
Click to collapse
It's good.
It seems like drivers problem.
But when you enter to fastboot mode the led blue flashes every time or fleshes on the moment and off.
If blue led off it's mean drivers problem for me.
I dont understand...if you cant enter fastboot mode,so you cant flash any kernel.My question,how you flash kernel from the zip actually?
flashes on the moment and off
iv tried many drivers nothing works
iv flashed zip in CWM
abaddon6661 said:
flashes on the moment and off
iv tried many drivers nothing works
Click to expand...
Click to collapse
Try to do hard reset. Remove the battery for 15 minutes.
Or try connect your phone to the mains without the battery for 15 minutes.
I see...actually you are not flash kernel,because kernel cant flashed through CWM.kernel ONLY can be flash through PC...
Sent from my MT11i using xda app-developers app
Your phone is not bricked. Had you unlocked your bootloader? New kernel can only be installed with unlocked bootloader in fastboot mode.
Open PC companion and select update phone, then remove battery, wait for 30 seconds, reinstall battery and connect phone to PC while pressing the back button, now follow instructions on PC. If this does not work you will need 'Sony_Ericsson_Update_Engine' which is no longer available on Sony website. If your bootloader is unlocked then you can install the stock kernel through fastboot mode and then flash stock ICS ROM through flashtool.
tgrobi said:
Try to do hard reset. Remove the battery for 15 minutes.
Or try connect your phone to the mains without the battery for 15 minutes.
Click to expand...
Click to collapse
Iv removed battery for 24h - no effect
Connecting without batter - no effect
mustang2011 said:
Your phone is not bricked. Had you unlocked your bootloader? New kernel can only be installed with unlocked bootloader in fastboot mode.
Open PC companion and select update phone, then remove battery, wait for 30 seconds, reinstall battery and connect phone to PC while pressing the back button, now follow instructions on PC. If this does not work you will need 'Sony_Ericsson_Update_Engine' which is no longer available on Sony website. If your bootloader is unlocked then you can install the stock kernel through fastboot mode and then flash stock ICS ROM through flashtool.
Click to expand...
Click to collapse
i have unlocked bootloader (test point - paid for this)
Pc companion detecting phone as "null"
Pressing back button - no effect. Phone not entering fastboot or flashmod mode
abaddon6661 said:
i have unlocked bootloader (test point - paid for this)
Pc companion detecting phone as "null"
Pressing back button - no effect. Phone not entering fastboot or flashmod mode
Click to expand...
Click to collapse
When you connect phone to mains does battery is charging?
Maybe microUSB port is damaged.
abaddon6661 has right, your phone isn't bricked.
----------------------------------
Sorry for my bad english
tgrobi said:
When you connect phone to mains does battery is charging?
Maybe microUSB port is damaged.
abaddon6661 has right, your phone isn't bricked.
----------------------------------
Sorry for my bad english
Click to expand...
Click to collapse
Battery is charging.
The problem is that i cannot reflash or enter fastboot.........
abaddon6661 said:
Battery is charging.
The problem is that i cannot reflash or enter fastboot.........
Click to expand...
Click to collapse
Can you enter CWM?
no
abaddon6661 said:
no
Click to expand...
Click to collapse
SUS (not SUSE) not detect phone too? In SUS is repair options.Your phone isn't brick SUS should repair it.
I spoke with a guy who had a similar problem. PC not detect phone and hi can't enter to fastboot mode. His phone has problem to battery. System kept that battery is low (0%). Exchange battery helped.
--------------------------------
Sorry for my bad english
Hi, i'm from Indonesia.
i have hard bricked my Z ultra.
the root of my Zul bricked when i want to flash deodexed.
before i flash the zip , i wipe cache and instal it
after reboot my phone have boot loop , and i use Hard reset.
now my phone cant go to fashboot mode and flashtool
can't detect ADB.
so i can't fix this phone. I charging to wall charge 10+ hours, now i got LED RED not blinking.
i try to connect to PC but still can't flash the tft.
Please Help me if somebody know to Fix, help me guys.
Regards,
Kevin
kevin Hansjaya said:
Hi, i'm from Indonesia.
i have hard bricked my Z ultra.
the root of my Zul bricked when i want to flash deodexed.
before i flash the zip , i wipe cache and instal it
after reboot my phone have boot loop , and i use Hard reset.
now my phone cant go to fashboot mode and flashtool
can't detect ADB.
so i can't fix this phone. I charging to wall charge 10+ hours, now i got LED RED not blinking.
i try to connect to PC but still can't flash the tft.
Please Help me if somebody know to Fix, help me guys.
Regards,
Kevin
Click to expand...
Click to collapse
How have you tried to enter flashmode and fastboot?
blueether said:
How have you tried to enter flashmode and fastboot?
Click to expand...
Click to collapse
I cant enter flashbmode and fastboot right now, i'm tried several times it wont connect, always said usb debuging OFF.
kevin Hansjaya said:
I cant enter flashbmode and fastboot right now, i'm tried several times it wont connect, always said usb debuging OFF.
Click to expand...
Click to collapse
I think he's asking you what steps you took to enter flashmode and fastboot.
kevin Hansjaya said:
I cant enter flashbmode and fastboot right now, i'm tried several times it wont connect, always said usb debuging OFF.
Click to expand...
Click to collapse
what i do is open the flashtool and use old rom , after flashtool ready i try connect my phone to PC , i hold volume up but always says usb debuging OFF.
Can you help me?
try to boot up the phone and hold volume up at the same time with usb plugged in, hopefully a blue led shows.
Hi guys
I have problem with my z2 the thing is my USB port is broken so I have been charging throw the magnetic port so I can't use PC anyway I was on exnsz < i splled that wrong rom then I decided to move to candy ROM 10 mins ago so I got gapps and the ROM 300mb was weird
It's says I have to use twrp and I used phill touch recovery I chosed clean install for new ROM then I installed then I got error I wasn't sure if it was error I saw installation complete I installed gapps then rebooted now my z2 won't work I press power button all I get is vibration no led I tried all the buttons power with volume down didnt work
help please i don't know what to do :crying:
BTW my battery was 25%
Bump
Help
Sal7_one said:
Hi guys
I have problem with my z2 the thing is my USB port is broken so I have been charging throw the magnetic port so I can't use PC anyway I was on exnsz < i splled that wrong rom then I decided to move to candy ROM 10 mins ago so I got gapps and the ROM 300mb was weird
It's says I have to use twrp and I used phill touch recovery I chosed clean install for new ROM then I installed then I got error I wasn't sure if it was error I saw installation complete I installed gapps then rebooted now my z2 won't work I press power button all I get is vibration no led I tried all the buttons power with volume down didnt work
help please i don't know what to do :crying:
Click to expand...
Click to collapse
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
ptmaniac said:
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
Click to expand...
Click to collapse
Thank you si much for replaying I will send it I'm an idiot for not seeing unlocked bootloader
I will fix USB and again thanks bro
ptmaniac said:
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
Click to expand...
Click to collapse
Bro I fixed the usb please it's flashing red what do I do
Sal7_one said:
Bro I fixed the usb please it's flashing red what do I do
Click to expand...
Click to collapse
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
ptmaniac said:
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
Click to expand...
Click to collapse
You're really awesome iknow how to use flash tool but it's says drivers are not installed and they are and what should I choice from the wipe menu
I solved the problem with the drivers when I try to flash ftf it's says preparing then it's says device disconnected should I put it on fastbot or flash mod
ptmaniac said:
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
Click to expand...
Click to collapse
I don't know why but my only problem is the device automatically disconnectes from flash tool after a minute I can't flash !!!! Please help
I downloaded sony companinton and update the phone and now the phone turn on and charge only it dosent work
Sal7_one said:
I downloaded sony companinton and update the phone and now the phone turn on and charge only it dosent work
Click to expand...
Click to collapse
Humm weird, try flashtool once again, maybe with another .ftf or another pc, select all wipes, choose flashmode, make sure your phone is completely powered-off, when flashtool asks to connect just keep pressing volume down and plug the usb cable. flashing should start fine now.
ptmaniac said:
Humm weird, try flashtool once again, maybe with another .ftf or another pc, select all wipes, choose flashmode, make sure your phone is completely powered-off, when flashtool asks to connect just keep pressing volume down and plug the usb cable. flashing should start fine now.
Click to expand...
Click to collapse
Nope after 1 minute flash mode turns off automatically soo now here is what I did
Step 1 downloaded sony c s
Step 2 installed supprot
Step3 press update device without contcing to pc
Step 4 chose repair
Step 5 go with it and put it in flash mode
Step 6 before it finishs it will take a long time
Then it will only charge you can't press the power button for some reason
Step 7 go to flash tool start flash mode and it will reboot automatically
Step8 you will be in safe mode go to settings and format the phone
Step 9 it will reboot and into normal mode
Step 10 root through king root and termanil to make it a real root not temporarliy
Step 11 enable usb debugging and install recovery
Step 12 copy the rom from pc to recovery
Step 13 installed the rom everything is amazing except for one problem
I still can't press the power button I don't think it's hardware help me
That's it thanks for everything tell me if you know anything about the power button
@Sal7_one Wow that was way more complicated than it should but i'm glad your phone is working again :good:
Did you open your phone to fix the usb port? or did you send it somewhere? unfortunately the power button situation does seem like hardware problem...
ptmaniac said:
@Sal7_one Wow that was way more complicated than it should but i'm glad your phone is working again :good:
Did you open your phone to fix the usb port? or did you send it somewhere? unfortunately the power button situation does seem like hardware problem...
Click to expand...
Click to collapse
Wtffffffff it's working again. I don't know how bro !!!! I just tested and it's start working again.
But one more problem sim card does not work yes I went to repir it thanks
@Sal7_one humm pwr button working when it wants and sim card problems... that sounds like a bad repair job they probably left a cable / connector loose inside your phone :| i would take it to the same place and make them check / repair the phone again
Hey, i have a Xiaomi Note 3 Pro Kenzo and one day he just turned off and never went back again. When i plug it on pc, it just shows black screen, flashes the red light multiple times and it's recognized as Qualcomm HS-USB Diagnostics 900E.
I've already searched online and seems that my phone is stuck on EDL mode, so I made it go to the real EDL mode that allows me to flash it a new rom. I managed to make my pc recognize as Qualcomm 9008.
Beeing that, I tried to flash a rom but at the mi flash 20160330 it gets stuck on: "send nop command" forever and at the mi flash 2170425 it gets the error : "<?xml version="1.0" encoding="UTF-8" ?><data><log value="init storage:fail " /></data> "
I've got another redmi note 3 pro, and I can flash it, so I don't there's any problem with my computer, but the info is:
Windows 10 Pro 64x
Safe Drivers Disable
If anyone can help...
gustavoabonare said:
Hey, i have a Xiaomi Note 3 Pro Kenzo and one day he just turned off and never went back again. When i plug it on pc, it just shows black screen, flashes the red light multiple times and it's recognized as Qualcomm HS-USB Diagnostics 900E.
I've already searched online and seems that my phone is stuck on EDL mode, so I made it go to the real EDL mode that allows me to flash it a new rom. I managed to make my pc recognize as Qualcomm 9008.
Beeing that, I tried to flash a rom but at the mi flash 20160330 it gets stuck on: "send nop command" forever and at the mi flash 2170425 it gets the error : "<?xml version="1.0" encoding="UTF-8" ?><data><log value="init storage:fail " /></data> "
I've got another redmi note 3 pro, and I can flash it, so I don't there's any problem with my computer, but the info is:
Windows 10 Pro 64x
Safe Drivers Disable
If anyone can help...
Click to expand...
Click to collapse
Seems like a problem with the emmc chip. Get the device checked to make sure that your emmc is not faulty. If the emmc is safe, contact me and I'll help. Until then good luck.
Archit9169 said:
Seems like a problem with the emmc chip. Get the device checked to make sure that your emmc is not faulty. If the emmc is safe, contact me and I'll help. Until then good luck.
Click to expand...
Click to collapse
Thx for the reply man, the problem is that i live in Brazil, we don't have Xiaomi assistance, so I don't have a place to get it checked ;x.
But yeah, I saw in other forums that this migth be a EMMC problem
gustavoabonare said:
Thx for the reply man, the problem is that i live in Brazil, we don't have Xiaomi assistance, so I don't have a place to get it checked ;x.
But yeah, I saw in other forums that this migth be a EMMC problem
Click to expand...
Click to collapse
Forget about warranty, get it checked at a local store.
I have faced this too ,3 months ago , you just need to open the case and then remove the unplug the battery cable then flash the fastboot ROM ,yes the PC will give give enough power to flash ,you must not replug the battery while flashing ,now when the flash is don't unplug the USB cable and put it in charger by hitting power button for 8 secs it will not charge then immediately replug the the battery cable then again press the power button for 8 sec till it reboots ,boom your system will boot
---------- Post added at 04:27 AM ---------- Previous post was at 04:26 AM ----------
I have faced this too ,3 months ago , you just need to open the case and then unplug the battery cable then flash the fastboot ROM ,yes the PC will give give enough power to flash ,you must not replug the battery while flashing ,now when the flash is don't unplug the USB cable and put it in charger by hitting power button for 8 secs it will not charge then immediately replug the the battery cable then again press the power button for 8 sec till it reboots ,boom your system will boot
Deep flash cable
Try flashing after removing the battery like Aditya said it worked on my friends phone.
[email protected] said:
I have faced this too ,3 months ago , you just need to open the case and then remove the unplug the battery cable then flash the fastboot ROM ,yes the PC will give give enough power to flash ,you must not replug the battery while flashing ,now when the flash is don't unplug the USB cable and put it in charger by hitting power button for 8 secs it will not charge then immediately replug the the battery cable then again press the power button for 8 sec till it reboots ,boom your system will boot
Click to expand...
Click to collapse
Thx man, will try when I get back from work
balazs312 said:
Deep flash cable
Click to expand...
Click to collapse
It's already in EDL 9008 mode, I used the test point. Don't know if the DFC will do anything different, but will try it anyway if the way Aditya told me don't work
I should explain you fully
1)removing battery will keep the phone in edl mode but it will solve your error of mi flash is mi flash will successfully flash the fastboot ROM ,remember you need to first remove the battery cable then insert phone ,no light will blink but it will be recognized as qsp loader port in your PC ,don't worry
2) after successfully completing the first step flash the complete fastboot ROM ,it should go success
3)now don't replug the battery cable now ,do nothing ,just insert cherger and press power button as long as the screen don't turn on ,when it will turn on the battery bar wouldn't go up, then without removing the charger cable from phone ,insert battery, you will see that battery is still not charging, nothing to worry this was just to turn the display on ,now again press the power button for 10 to 14 sec so that the device reboot and boom your phone will start charging and after you can successfully boot into system and use your phone.
4)this is if you still cannot successfully flash using mi flash tool just unplug all a the cable which you see after opening back case don't worry you just have to open the cables which you see ,you don't have to unplug those cables in which you have to open screws etc .
Hope this will help you
[email protected] said:
I should explain you fully
1)removing battery will keep the phone in edl mode but it will solve your error of mi flash is mi flash will successfully flash the fastboot ROM ,remember you need to first remove the battery cable then insert phone ,no light will blink but it will be recognized as qsp loader port in your PC ,don't worry
2) after successfully completing the first step flash the complete fastboot ROM ,it should go success
3)now don't replug the battery cable now ,do nothing ,just insert cherger and press power button as long as the screen don't turn on ,when it will turn on the battery bar wouldn't go up, then without removing the charger cable from phone ,insert battery, you will see that battery is still not charging, nothing to worry this was just to turn the display on ,now again press the power button for 10 to 14 sec so that the device reboot and boom your phone will start charging and after you can successfully boot into system and use your phone.
4)this is if you still cannot successfully flash using mi flash tool just unplug all a the cable which you see after opening back case don't worry you just have to open the cables which you see ,you don't have to unplug those cables in which you have to open screws etc .
Hope this will help you
Click to expand...
Click to collapse
Hey man, didn't work, I disconnected the battery as you said and still got the error when I tried to flash. I downloaded the last rom available from xiaomi site (kenzo_global_images_V9.5.3.0.MHOMIFA_20180405.0000.00_6.0_global_7b6353b764), but still nothing.
I guess it's the EMMC chip alright ;x, but thx anyway
Bro sorry that I couldn't help but can you please try unpluging the cable as shown in the figure and then try to flash using mi flash tool if it still even don't help sorry bro
Unplug the cable given in figure and then try to flash using mi flash , if the device is not detected then replug that cable and and then try to flash if it still don't help sorry bro
[email protected] said:
Bro sorry that I couldn't help but can you please try unpluging the cable as shown in the figure and then try to flash using mi flash tool if it still even don't help sorry bro
Unplug the cable given in figure and then try to flash using mi flash , if the device is not detected then replug that cable and and then try to flash if it still don't help sorry bro
Click to expand...
Click to collapse
Already tried, didn't work, but thx anyways man
Just plug it in to a wall charger. I had the same issue even after edl flash miui rom but charging it fixed my problem. Follow these steps.
1- plug it in
2- ignore the red led blinking
3- wait for 5 min.
4- it will boot.
5- if doesn't, I'm sorry