Hi,
I have bricked my phone
Before on boot screen it showed SPL 4.xx now it is disappeared and also some other information regarding to SD card is disappeared too.
Here is OS and phone details:
OS version: 7.10.7720
Model: HTC T9295
Varrier: AT&T
Bootloader4.5.2250
Chip SOC: 2.2.5.0
I was about to install HSPL and then windows Phone 8 but stacked. I think my phone have RUU OS as I don`t know how to test it. I have read warning on developer`s site, but never though this is for of my phone :S
Please Help
Regards,
Turkel.
trecords said:
Hi,
I have bricked my phone
Before on boot screen it showed SPL 4.xx now it is disappeared and also some other information regarding to SD card is disappeared too.
Here is OS and phone details:
OS version: 7.10.7720
Model: HTC T9295
Varrier: AT&T
Bootloader4.5.2250
Chip SOC: 2.2.5.0
I was about to install HSPL and then windows Phone 8 but stacked. I think my phone have RUU OS as I don`t know how to test it. I have read warning on developer`s site, but never though this is for of my phone :S
Please Help
Regards,
Turkel.
Click to expand...
Click to collapse
sorry bro your phone is full bricked...no way to recover from this situation... except jetung box.
Related
Hi,
I'm trying to make my Vodafone 1605 VPA SuperCID, but when I run HERM_Unlock_v2a.exe I get a Windows error ...not a valid Win32 application.
I'm guessing this is something to do with my laptop hardware because I've had a problem loading other software due to the Due chip (Dell Latitude D820 - Centrino Duo etc).
Any advice appreciated - but be gentle with me 'cos I'm new to upgrading Windows mobile.
You actually copy that file onto your phone and run it from there, not the computer.
That should do the trick!
Thanks for quick reply - it shows how much I've got to learn!!!
Ran the file from my phone and got the "SUCCESS" message but when I checked using mtty.exe the phone still reports locked to vodafone.
I'll have a play and see what I come up with - hopefully not frying the phone in the process
ach2 said:
Ran the file from my phone and got the "SUCCESS" message but when I checked using mtty.exe the phone still reports locked to vodafone.
Click to expand...
Click to collapse
You _must_ be running the unlocker's patched radio 1.16 on your phone when you run HERM_Unlock_v2a.exe, otherwise it will report "SUCCESS" but do nothing.
Thanks Pof, but I don't know what to do next...
my bootloader screen shows IPL-1.00 and SPL-1.04.
My device info shows:
ROM version: 1.20.161.6
ROM date: 08/02/06
Radio version: 1.03.06.00
Protocol version: 32.34.7010.01W
I've read most of the WIKI (and even understood most of it) and also as many posts to this forum as I could.
Also, the 'available ROMs' page shows that this is the only ROM that Vodafone UK have produced and, bacause another poster has done the same thing with the same hardware and ROM I guessed I shouldn't have too much problem.
I think that as a beginner I must be doing something wrong or misunderstanding some of the lingo but would appreciate any more help which will get me away from the Vodafone ROM - and who knows, as I learn I may even be able to help some others later
Cheers, and thanks for all the informative posts
ach2 said:
my bootloader screen shows IPL-1.00 and SPL-1.04.
Radio version: 1.03.06.00
Click to expand...
Click to collapse
Follow instructions here, after flashing patched rom your radio version should show 1.16, then run HERM_Unlock_v2a.exe on your phone and wait the "success" message. After that you should be SuperCID, if not, read the unlocking thread... it has all been answered before.
OK, finally worked it out - all I had to do was RTFW - ALL of it, not just the parts I think are relevant.
Cheers for the help, I'm sure I'll screw up later and need more lelp but I've learned loads already...
Now trying to work out which ROM to use (except Vodafone) and hoping not to brick the phone in the process )
UnBrick the Bricked Hermes with "SPL 2.03 - IPL 1.04 - NO GSM - KITL Disabled"
There are many people have this kind of brick but still no solution for it.
I want to ask the mods to make this thread sticky so if anyone find a sulotion for this type of brick would post it Here.
Summary :
IPL: 1.04
SPL: 2.03
CID: NO CID (Request timeout on mtty.exe)
NO GSM
KITL Disabled
I have tested all the possible sulotions available in the wiki but none of the could help me unbrick my hermes.
P.S. : Please just post your sulotions here NOT your comments like "you should superCID your device first", "It's your fault to use telstra wm6",....
Has anyone found a sulotion for this???
You Pm-ed me asking what to do and i pointed you in the correct direction so why have you started this thread?!
Hermes Unbricking Thread
and
Wiki page: How to unbrick your bricked hermes
EVERYTHING you need is there, you just have to read.
Maybe You do not read my Pm!
I have read all the wiki and thread concerning my problem several times!
The simple truth is that some phones are unrecoverable and have to be sent off for repair. Yours is one of these situations and I very much doubt that this will change. More and more of the pioneering technical guys will have updated their Hermes to another phone and the much admired POF has not been seen since he was accused of stealing...
The tacit feeling is that there is enough information and utilities to prevent people bricking their phones (i.e HardSPL and Update from MicroSD card) so if you do find yourself in this unfortunate position and can not recover your phone then you have to bite the bullet, and be better informed the next time.
POF accused of stealing !!!!????
What's that all about?
I dunno if I have a the same problem, but a similar issue, and trust me I am "PC guys, AMD fanboy, A+ tech:"whatever you wanna call i, I am expanding my horizons and I got into the mobile PC world. Trust me I am NOT Google lazy, i have read and read and read and researched and cross-checked and tried literally everything. I am stuck, I know what is wrong with my Hermes, I know where it messes up, and I DO see threads in other sites with 99.9% the same problem I have and I see NO soultion or anyone who knows or Really wants to help, I feel for Koorosh we need help, I have come to terms if have to send it away to repair. That bugs me I got it Literally 3 days ago, and ONLY used the OFFICAL AT&T WM6 Rom to upgrade
on my bootloader all I see is this........
IPL: 1.04
SPL: 2.03
I have too see in my display
IPL: 1.04
SPL: 2.03
when i can flash radio 1% and restart device!
try it
i also had the same problem.i have resolved using rom update through memory card.look for it in wike section.all the best.try it with original rom that came with the phone.
this will not work in this site again no solution for bricked spl2.03 cid locked
biswajitghosh said:
i also had the same problem.i have resolved using rom update through memory card.look for it in wike section.all the best.try it with original rom that came with the phone.
Click to expand...
Click to collapse
Do you know to read micro sd flash not work when device is not superCID!!!
I maybe have the same issue.
From the HTC ROM I flashed my device to Shannix Grass rom, a few days later I flashed to Satin Black rom, so far so good. After that I want to flash back to Shannix Grass and my deviced crashed. While booting he stuck at the HTC screen.
I tried to hard reset, flash another rom (stuck and reset at 1%), flash the bootloader (stuck and reset at 7%). After the failed ROM flashing I get error 270 image is corrupted.
In mtty I tried to format the NAND, and tried the erase command, nothing worked.
How can I diagnose the problem further. Is it possible to see why the ROM update failed or why the OS won't boot? I did some monitoring with USB monitor but I didn't get results where I get some conclusions of.
---
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.03
Built at: Jun 16 2007 01:57:22
Copyright (c) 1998-2006 High Tech Computer Corporation
(My device is Herm200)
wow , i have the problem too. i almost live in phoneless .
.
SOLVED !!!!!!!! my phone now works
If your device became inoperable like mine, because i had a failed ROM upgrade,and the device failed to power up i have good news for ya.
MY DEVICE info is as below.
Problem:
Phone does not boot up, and looks like a red brick.
IPL: 1.04
SPL: 2.03
(it always gave an error 206 at 1% of any ROM update i tried)
Solution:
I downloaded the official WM6 ROM from the HTC's website below,
http://www.america.htc.com/support/8525/software-downloads.html
Then reset my device to the bootloader screen.
(holding the 'ok' button and the 'power' button and then using my stylus to push the 'reset' button close to the USB port.
i then disconnect the USB cable from my phone, and the display showed 'serial'.
i then ran the downloaded file, and waited till the collecting information from phone window came up, then i connected the usb cable back to the phone.
it connected, and VOALLA!!!... it started the update.
at least its better to have a working phone(without all the custom stuff), than none.
I hope this was not booring( with all the detail and all), but i hope it will help anyone out there who's device wont bootup.
wow , congraution!
i will take the method. but i wonder should i have to get the "connecting time" in the right point, or the computer can't find my phone??
( hope u know what i mean?)
Um.... i cant say for sure
weyun0513 said:
wow , congraution!
i will take the method. but i wonder should i have to get the "connecting time" in the right point, or the computer can't find my phone??
( hope u know what i mean?)
Click to expand...
Click to collapse
Well.. i can't say you should wait 1 or 2 seconds, but just plug it in as soon as you get that screen. i hope it works for you tooo.
what was ur exact situation beforeu can unbrick ur phone???
IPL?
SPL?
KITL??
NO GSM ERROR?
what was the rom that has bricked ur device??
where did it stuck during the brick phase?
is that 1st splash,2nd splash,...??
This method did not work for me!!!!!
Try the Official Cingular ROM
koorosh_bsboys said:
This method did not work for me!!!!!
Click to expand...
Click to collapse
My Hermes "red hot brick" happened when i tried upgrading to aCRCs_PHKv12r8, from a Schaps_WM6Pro_Hermes_4.31_WWE_Full ROM.
My device is a Cingulat 8525.
The upgrade went to the tricolor screen, and after 1% , my phone magically went off. I tried powering on, but it went to the tricolor screen again showing
IPL 1.04
SPL 2.03
and underneath showed "serial".
me too i'm having the same problem....any experts out there that could help us?
hello! im not so god at English. so it can be hard to understand what im trying to explanie.
my htc stoped to work as phone a few mouht back. so i bought i new phone,
but now i want my htc back. and i have looked everywhere on this forum for a answer, and ever time i find something it dosent work for me.
in the device info it says that my radio version is None. so thats bad i think?
i tried to flash and put in a new SPL and all of that, but when the phone go to bootloader the connection between the computer and phone disperse. my OS on the computer is win7, and i have tried it on a computer whit xp whit the same results.
so what can i do to make the phone work again?
/Dreamcore
pleas, can somebody help me? i tried everting now, usb monitors and changed spl like a milion times now, what do you need to see my problem?
Model:HTC TYTN
ROM Before Flash:shiped wm6?
Radio Before Flash:??
Bootloader Before Flash: 1.04
Flash failed at:no
Flashing ROM:??
Flashing Radio: ??
Bootloader After Failure:??
CID Before Failure Super CID: ??
CID Corrupt: ??
Radio Corrupt: Yes
No GSM Error: Yes
Stuck In Bootloader: No
Stuck On Windows Mobile Splash:no
Can boot into OS: yes
Tried mtty command set 14 0:no, cant connect to it
Tried wiki problem number 5: Yes
mtty info 2 output: CID:??
Current Device Status: phone dead, but the rest works fine
if somebody wants a usbmonitor screener from my, so pleas help me understand how to do it..
been reading treads for 6 ours now. so pleas, help me
Phone needs...
The Phone needs a new system board! Radio hardware failed!
These phones are getting to be about 5 years old?? or more??
They need new boards!
$90 + shipping online. Or whatever method you can come up with to get one.
Good Luck.
i really need urs help im into trouble i had brick my cell now i cant unbrick my mozart wp7 see what i did
i use spl rspl hspl by dft and i use rspl to ospl 1st i had orignal botloader version 1.23 and now i got 1.32 i was using deepshine 2.0 after thet i successfully flash rom i went back to install a new rom its stuck on bootloader rom and sometime HTC logo in green color and vibrate few time no more windows just give me suggestion waiting for urs kind respnce
Regards
Mohsin Raza
Your Bootloader shows "HSPL1.32xxxx" in the first and "CotullaHSPLxxxxx" in the second Raw?
Then you can flash a Custom ROM .
If you has restored the "OSPL"back, then you only can flash Stock ROMS from your Provider.
Make a Hard reset first .
ok here is what i try alrady
i press power+vol up+down for a hard reset and press andykey to reset and 1st i install RSPL i have 1.23 bot loader then after installing rom successfull i got 1.32 what that mean after that i cant install any other rom and my firmwere has been bricked its stucked on HTC logo few imes vibrate
Again: You have HSPL or not ?
yes i have but no luck i guess i need to repair my spl downgrade back to 1.23 orignal spl but how? right now i have 1.32 i did everything
The HSPL Bootloader is 1.32 !
If you want to get back to original Bootloader you can restore it with the same Tool , only select "OSPL" before.
After that you can flash you Stock ROM from your Provider.
After this , you have the actual SPL from Stock ROM on your Phone ...
soory for a late responce but i did that alrady no luck now i had sent my htc to care center for unbrick and install a official rom...after that i will not stop doing exparement on my mozart but i will be careful next time thanx for urs advice thanx
Regards,
Mohsin raza
will you please PM me for how to get official ROM for my phone
OS version:7.10.8783.12
Firmware revision number: 2250.21.51303.401
Hardware revision number: 0004
Radio software version: 5.71.09.02a_22.51.50.21U
Radio hardware version: A.102.0.D4
Bootloader version: 5.13.2250.3(135167)
Chip SOC version: 2.2.5.0
I had a reliable debranded Mozart which has been unlocked by Orange in the UK and was running the ansar rom. It has accepted many updates in the post (post debranding) via Zune.
Unfortunately the 7.10.8112.7 update was problematic with error codes C1010007 and then C101002E.
I am left with a useless phone. I have done a factory reset to no avail.
The phone will boot into wp7.5 and sometimes holds for a few minutes before rebooting. Other times it gets into a loop while booting and ends up vibrating 7 times.
Any ideas anyone?
Is a fresh rom likely to help and if so which one?
I am currently showing:
OS 7.10.8107.79
Firmware 2250.21.51201.401
HW Rev 0004
SPL 5.12.2250.1
Thanks in advance
An Update
I have now dne a successful factory reset. Achieved this by leaving the battery out over night. I have been here before and am pretty sure that I will struggle to apply the above update.
Any suggestions would be appreciated.
desmo992 said:
I had a reliable debranded Mozart which has been unlocked by Orange in the UK and was running the ansar rom. It has accepted many updates in the post (post debranding) via Zune.
Unfortunately the 7.10.8112.7 update was problematic with error codes C1010007 and then C101002E.
I am left with a useless phone. I have done a factory reset to no avail.
The phone will boot into wp7.5 and sometimes holds for a few minutes before rebooting. Other times it gets into a loop while booting and ends up vibrating 7 times.
Any ideas anyone?
Is a fresh rom likely to help and if so which one?
I am currently showing:
OS 7.10.8107.79
Firmware 2250.21.51201.401
HW Rev 0004
SPL 5.12.2250.1
Thanks in advance
Click to expand...
Click to collapse
Like many other Users of that fu**ed Phone !
Iv got 2 of that Mozarts, one with the reboot and second without.
Its a Hardware Problem. Both Phones have the same ROM , changing Batteries ,changing SDCard, no Matter
it stays; the first reboots , the second never...
Update on Rebooting
Here is an update of my rebooting issue:
Following a factory reset (battery left out overnight) the phone is not longer rebooting PROVIDED THAT ID DO NOT CONNECT TO A WIRELESS NETWORK OR ATTEMPT TO APPLY AN UPDATE VAI ZUNE.
I am also able to get into the bootloader (spl5.12.2250.1) and establish a USB connection.
I do not want to mess with rolling back the bootloader as that seems to be a very high risk undertaking.
My suspicion is that a fresh rom installation may sort the problem as it only appeared after applying an update.
So can anyone suggest options for updating to a new reliable rom which will not consume excessive battery life - or at least point me in the right direction for one which is compatible with my current spl.
Thanks in advance.
Mike
desmo992 said:
Here is an update of my rebooting issue:
Following a factory reset (battery left out overnight) the phone is not longer rebooting PROVIDED THAT ID DO NOT CONNECT TO A WIRELESS NETWORK OR ATTEMPT TO APPLY AN UPDATE VAI ZUNE.
I am also able to get into the bootloader (spl5.12.2250.1) and establish a USB connection.
I do not want to mess with rolling back the bootloader as that seems to be a very high risk undertaking.
My suspicion is that a fresh rom installation may sort the problem as it only appeared after applying an update.
So can anyone suggest options for updating to a new reliable rom which will not consume excessive battery life - or at least point me in the right direction for one which is compatible with my current spl.
Thanks in advance.
Mike
Click to expand...
Click to collapse
Dear,
It seems that during update you phone might have low battery or update is interrupted.
You can install offical rom containing 201 search in file factory.
Otherwise go with the below, but you will need to downgrade your spl which is a lengthy process.
http://forum.xda-developers.com/showthread.php?t=1837393
Update to my last update
Thanks for your reply adeebulrehman
1. In your opinion, what are the merits of each of the two roms you suggest?
2. Can you suggest where I download the official rom safely?
3. Can you point me in the right direction for some safe and reliable spl downgrade instructions?
Many thanks
Mike
Karlitos
HI am new to this site and pls i want an advice on what to do on my htc hd7 WM 7.5 (upgraded yesterday)
well since i add the phone had problem with an error msg dat says (couldnt connect with my phone) when ever i sign in into my window live account.
secondly i was able to use same account id to sign in on my computer to download games and application but dnt know how to transfer dem to my phone...............
lastly i wish to switch to install android on my HTC hd7 as i did to my htc hd2..............but seems der is no hack to that.
below is the spec of my phone
name: karlitos
model: HTC HD T9292
software: win 7.5
total storage 14.64gb
available: 13.56gb
os version: 7.10.7740.16
firmware version no.: 2250.21.51004.401
hardware version no.: 0002
radio software version: 5.71.09.02a_22.51.50.21U
radio hardware version: A.102.0.D4
bootloader version: 5.10.2250.0(132968)
chip Soc version: 2.2.5.0
thanks ...................
desmo992 said:
Thanks for your reply adeebulrehman
1. In your opinion, what are the merits of each of the two roms you suggest?
2. Can you suggest where I download the official rom safely?
3. Can you point me in the right direction for some safe and reliable spl downgrade instructions?
Many thanks
Mike
Click to expand...
Click to collapse
Dear,
Just Search Mozart Shipped Rom That matches your firmware revision number last 3 number of third section.
2250.21.40600.061
For downgrading SPL there are details post of our Forum Moderators kindly read. All these are safe method unless you make a mistake