Need Proper MJ7 or MK2 odin tar file - Verizon Samsung Galaxy S 4

i need an MJ7 or an MK2 odin flashable file. I know there is another thread with the link but whenever i try to download it i get an error, could someone please upload it somewhere else, my phone is currently a paper weight .
Thanks!!!

http://forum.xda-developers.com/showthread.php?t=2507217

fillyo said:
http://forum.xda-developers.com/showthread.php?t=2507217
Click to expand...
Click to collapse
whenever i try to download it i get a network error message.

Michaelmansour1997 said:
whenever i try to download it i get a network error message.
Click to expand...
Click to collapse
Link works for me in Chrome

rsalas187 said:
Link works for me in Chrome
Click to expand...
Click to collapse
Could You please mirror it, or upload it to a torrent website!
thanks

Michaelmansour1997 said:
whenever i try to download it i get a network error message.
Click to expand...
Click to collapse
areyou trying to direct load to your computer or phone? I also hesitate to download to the phone as this usually the start of problems when its files of this size. Always better ot dl to computer and just copy it over....always check MD5 checsum

decaturbob said:
areyou trying to direct load to your computer or phone? I also hesitate to download to the phone as this usually the start of problems when its files of this size. Always better ot dl to computer and just copy it over....always check MD5 checsum
Click to expand...
Click to collapse
Im trying to download it on my computer.

Related

[Q] ICS

Can someone please give a detailed post on how I install this on my phone. I have the files downloaded on my computer and just need to upload or flash them on my phone. thanks for the help
corey_r said:
Can someone please give a detailed post on how I install this on my phone. I have the files downloaded on my computer and just need to upload or flash them on my phone. thanks for the help
Click to expand...
Click to collapse
Which ICS did you download? The one from Rootzwiki or DAGr8's from here?
rootwitzki
corey_r said:
rootwitzki
Click to expand...
Click to collapse
It's a Odin one-click file. I'm really not sure how you can mess this up. Just put your phone into download mode, connect it to USB, run the .exe file and click the button.
I'm not sure if you should really be flashing yet. You should read up more on flashing, bootloaders and odin before hand. It'll save you and everyone else lots of time, in case something goes wrong. Just saying.
Plus, the flashing procedures have been posted countless times. Just search and read.

bootloop/soft brick galaxy player 4.0 us help!!

after i rooted my player i went into google play and downloaded this root tools app to change things and i may have changed a boot up animation and it required a reboot and as it went to the samsung logo it went into a bootloop. i did lots of research and i download odin which wouldnt work and heimdall which refused to open. so is there any way to get my 2 week old player working agian?
thanks in advance,
Isaac
galaxydude said:
after i rooted my player i went into google play and downloaded this root tools app to change things and i may have changed a boot up animation and it required a reboot and as it went to the samsung logo it went into a bootloop. i did lots of research and i download odin which wouldnt work and heimdall which refused to open. so is there any way to get my 2 week old player working agian?
thanks in advance,
Isaac
Click to expand...
Click to collapse
Lol you have the same name as me . But for heimdall did you install the c++ redristribuables?
Haha cool. Yes I downloaded the 2010 version after downloading heimdall. Should I redownload heimdall?
galaxydude said:
Haha cool. Yes I downloaded the 2010 version after downloading heimdall. Should I redownload heimdall?
Click to expand...
Click to collapse
You can try but what error it gives you when you try to run it?
zaclimon said:
You can try but what error it gives you when you try to run it?
Click to expand...
Click to collapse
It says a .dll file is missing
Well this is what I'd do: Open Odin3, put your player in download mode,(VolUp+Pwr) and download Entropy512's Kernal(the .tar) or if youre on a 4.0 then rumirands kernal and flash that to your player. Then flash a stock rom via CWM. If you have nothing important on your player then you can just wipe user data and you'd be done.
EcHoFiiVe said:
Well this is what I'd do: Open Odin3, put your player in download mode,(VolUp+Pwr) and download Entropy512's Kernal(the .tar) or if youre on a 4.0 then rumirands kernal and flash that to your player. Then flash a stock rom via CWM. If you have nothing important on your player then you can just wipe user data and you'd be done.
Click to expand...
Click to collapse
The thing is the package made for US players are supposed to be flashed using heimdall. and rumirand is for 5.0 INTL not for 4.0
But did you installed this?
https://www.microsoft.com/en-us/download/details.aspx?id=5555
EDIT: Oops it seems that you already downloaded it but i'll keep the link in case.
EcHoFiiVe said:
Well this is what I'd do: Open Odin3, put your player in download mode,(VolUp+Pwr) and download Entropy512's Kernal(the .tar) or if youre on a 4.0 then rumirands kernal and flash that to your player. Then flash a stock rom via CWM. If you have nothing important on your player then you can just wipe user data and you'd be done.
Click to expand...
Click to collapse
Is there a certain place to get the file? Btw I have the 4.0 and I can access download mode. And what is cwm?
zaclimon said:
The thing is the package made for US players are supposed to be flashed using heimdall. and rumirand is for 5.0 INTL not for 4.0
But did you installed this?
EDIT: Oops it seems that you already downloaded it but i'll keep the link in case.
Click to expand...
Click to collapse
Yup it's installed but heimdall frontend still won't open.
galaxydude said:
Yup it's installed but heimdall frontend still won't open.
Click to expand...
Click to collapse
Redownload heimdall and C++ redistribuable. I saw the same error with other people and this is the only cause of it. Did you reboot your computer too?
Just to be sure the dll is MSVCP100.dll right?
zaclimon said:
Redownload heimdall and C++ redistribuable. I saw the same error with other people and this is the only cause of it. Did you reboot your computer too?
Just to be sure the dll is MSVCP100.dll right?
Click to expand...
Click to collapse
I believe I did reboot my computer and I just redownloaded c++ program but I did download multiple heimdall programs none of them worked. Yes that is the error I am getting.
galaxydude said:
I believe I did reboot my computer and I just redownloaded c++ program but I did download multiple heimdall programs none of them worked. Yes that is the error I am getting.
Click to expand...
Click to collapse
Try this solution from the heimdall's creator:
I have been trying to run this for a while now to downgrade from JM6 on my tab, i keep on getting the attached error, I have installed VC++ runtime, i am on Win7 Ultimate, 32 bit OS
Hmm, that error looks like the kind of error you would receive when the VC++ runtimes aren't installed, or not properly installed, on your system. Do a search in your Windows\system32 directory for the DLL that is giving the error to make sure it's there. This certainly shouldn't be required, but try copying that DLL to the same directory as the Heimdall executables.
Click to expand...
Click to collapse
zaclimon said:
Try this solution from the heimdall's creator:
Click to expand...
Click to collapse
I'll try this when my laptop is charged up. So is my player recoverable?
galaxydude said:
I'll try this when my laptop is charged up. So is my player recoverable?
Click to expand...
Click to collapse
Yes if you can acess download mode and recovery mode, it is recoverable. If it don't work with your laptop, try with your desktop though.
zaclimon said:
Yes if you can acess download mode and recovery mode, it is recoverable. If it don't work with your laptop, try with your desktop though.
Click to expand...
Click to collapse
what is recovery mode? im about to try it right now ill tell you if it works.
thanks for the help
zaclimon said:
Try this solution from the heimdall's creator:
Click to expand...
Click to collapse
now that i look at it its very complicated. i dont know how to get to the windows/system32 directory and btw i have window vista
ok screw it im doing the unbricking on my desktop. so can i have the procedures and links to unbrick my galaxy player 4 U.S. verison.
thanks for the help
galaxydude said:
now that i look at it its very complicated. i dont know how to get to the windows/system32 directory and btw i have window vista
ok screw it im doing the unbricking on my desktop. so can i have the procedures and links to unbrick my galaxy player 4 U.S. verison.
thanks for the help
Click to expand...
Click to collapse
Yes sure the link is here:
http://forum.xda-developers.com/showthread.php?t=1531850
zaclimon said:
Yes sure the link is here:
http://forum.xda-developers.com/showthread.php?t=1531850
Click to expand...
Click to collapse
thanks for all your help i appreciate it. thanks button pressed
galaxydude said:
thanks for all your help i appreciate it. thanks button pressed
Click to expand...
Click to collapse
It's solidarity for isaac's . So how well did the recovery goes?
zaclimon said:
It's solidarity for isaac's . So how well did the recovery goes?
Click to expand...
Click to collapse
haha yup! and im in heimdall frontend but i dont understand how to add the partitions were do i need to browse to get the files?

[Q] killing the system update

I recently purchased an S4 and managed to get an MDK version. I haven't had a chance to root it yet, so I used to keep canceling out of the system update prompt. Unfortunately, today while I was typing an email the prompt came up and I accidentally hit the install prompt, which led to an immediate reboot of my system and it initiated the installation of the system update. I managed to take the battery out immediately and prevented the update from completing. Every time I reboot the phone now, it goes through the "installing system update" cycle and I have to remove the battery to prevent it from completing.
Do I have any chance of killing the update process and retaining the MDK version?
the_jaguar said:
I recently purchased an S4 and managed to get an MDK version. I haven't had a chance to root it yet, so I used to keep canceling out of the system update prompt. Unfortunately, today while I was typing an email the prompt came up and I accidentally hit the install prompt, which led to an immediate reboot of my system and it initiated the installation of the system update. I managed to take the battery out immediately and prevented the update from completing. Every time I reboot the phone now, it goes through the "installing system update" cycle and I have to remove the battery to prevent it from completing.
Do I have any chance of killing the update process and retaining the MDK version?
Click to expand...
Click to collapse
Try booting it into download mode and then cancelling to see if it would boot normally. Root then freeze/rename/delete sdm.apk. if not I would download the mdk stock image and flash through odin to remove the update files. After getting it to boot enable airplane mode and root itm
Sent from my SCH-I545 using Tapatalk 2
hexitnow said:
Try booting it into download mode and then cancelling to see if it would boot normally. Root then freeze/rename/delete sdm.apk. if not I would download the mdk stock image and flash through odin to remove the update files. After getting it to boot enable airplane mode and root itm
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the suggestion. I just booted into "Download Mode", but didn't connect my phone to the computer. I powered down the device and rebooted. It went into recovery mode and tried to install the system update again... any other suggestions to kill the update from taking?
the_jaguar said:
Thanks for the suggestion. I just booted into "Download Mode", but didn't connect my phone to the computer. I powered down the device and rebooted. It went into recovery mode and tried to install the system update again... any other suggestions to kill the update from taking?
Click to expand...
Click to collapse
I have an idea. Someone may need to confirm this will work. Actually im pretty sure it will work. Flash the MDK pit file in odin. If you need the file let me know.
I second that idea.
Surge1223 said:
I have an idea. Someone may need to confirm this will work. Actually im pretty sure it will work. Flash the MDK pit file in odin. If you need the file let me know.
Click to expand...
Click to collapse
I am absolutely willing to try it. I would really appreciate it if you could provide me the file and also point me in the right direction.
Thanks much,
Jag
Here is a link to a ODEX or DEODEX stock rom. Just download your preference and flash with Odin. If you need help with that, just post and we'll give the steps.
Heatshiver said:
Here is a link to a ODEX or DEODEX stock rom. Just download your preference and flash with Odin. If you need help with that, just post and we'll give the steps.
Click to expand...
Click to collapse
Thanks much. Can't I just use the ODIN and flash the pit file? Do I have to flash the full rom?
Sorry about that, misread the post. Here's the pit file.
the_jaguar said:
Thanks much. Can't I just use the ODIN and flash the pit file? Do I have to flash the full rom?
Click to expand...
Click to collapse
Report back on how it goes or if you more help. Good luck.
Sent from my SCH-I545 using xda app-developers app
Heatshiver said:
Sorry about that, misread the post. Here's the pit file.
Click to expand...
Click to collapse
Surge1223 said:
Report back on how it goes or if you more help. Good luck.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Thanks guys - I will try to do this tomorrow and report back.
the_jaguar said:
Thanks guys - I will try to do this tomorrow and report back.
Click to expand...
Click to collapse
Thanks so much. I went ahead and flashed the pit file. I was able to retain the MDK version - yay!

Sense 6 OTA

I captured the OTAPkg.zip, but I can't upload it...... Any suggestions where I should upload it for everyone??
xangel9626 said:
I captured the OTAPkg.zip, but I can't upload it...... Any suggestions where I should upload it for everyone??
Click to expand...
Click to collapse
Send a tip to the moderators at xda-developers.com or alert androidpolice.com, I can see them helping you.
xangel9626 said:
I captured the OTAPkg.zip, but I can't upload it...... Any suggestions where I should upload it for everyone??
Click to expand...
Click to collapse
Very, very nice! Thanks for capturing the OTA! I'd be glad to help you in the uploading process. Perhaps a good place to upload it would be DevHost or Google Drive? Feel free to let me know if you need help doing so. Once it's uploaded, I'll be sure to update the story I put out earlier on this update: http://www.xda-developers.com/andro...6-update-finally-rolls-out-to-att-htc-one-m7/
google drive or any file host really
willverduzco said:
Very, very nice! Thanks for capturing the OTA! I'd be glad to help you in the uploading process. Perhaps a good place to upload it would be DevHost or Google Drive? Feel free to let me know if you need help doing so. Once it's uploaded, I'll be sure to update the story I put out earlier on this update: http://www.xda-developers.com/andro...6-update-finally-rolls-out-to-att-htc-one-m7/
Click to expand...
Click to collapse
Wonders_Never_Cease said:
google drive or any file host really
Click to expand...
Click to collapse
Here you go guys Enjoy ...
http://www.androidfilehost.com/?fid=23501681358542441
MD5: 317bae285618b070279b3a58b2e308e5
Cool thanks sir
clsA said:
I'll post the link here at about 10:15 EST (around 10 min to go)
Click to expand...
Click to collapse
xangel9626 said:
I captured the OTAPkg.zip, but I can't upload it...... Any suggestions where I should upload it for everyone??
Click to expand...
Click to collapse
I got you covered .. thanks for the heads up
clsA said:
Here you go guys Enjoy ...
http://www.androidfilehost.com/?fid=23501681358542441
MD5: 317bae285618b070279b3a58b2e308e5
Click to expand...
Click to collapse
Many thanks, good sir. Article updated and credit given.
clsA said:
I got you covered .. thanks for the heads up
Click to expand...
Click to collapse
Thanks clsA. I tried to post a link and I wasn't even allowed to do that......
xangel9626 said:
Thanks clsA. I tried to post a link and I wasn't even allowed to do that......
Click to expand...
Click to collapse
it's ok ... Welcome to XDA
Flashable w/ stock recovery?
xandr115 said:
Flashable w/ stock recovery?
Click to expand...
Click to collapse
It's supposed to be. I got the update from my wife's phone which was able to update, but when I tried to apply it to my phone (which won't download the update) with recovery, I get a Check CID Failed and my phone reboots. All you can do is try and see if it works.
xangel9626 said:
It's supposed to be. I got the update from my wife's phone which was able to update, but when I tried to apply it to my phone (which won't download the update) with recovery, I get a Check CID Failed and my phone reboots. All you can do is try and see if it works.
Click to expand...
Click to collapse
So is this the Sense 6 update only? Will I lose any data, apps, or settings?
xpurtwitness said:
So is this the Sense 6 update only? Will I lose any data, apps, or settings?
Click to expand...
Click to collapse
Nope, it's just the Sense 6 update, everything on your phone is safe.
xpurtwitness said:
So is this the Sense 6 update only? Will I lose any data, apps, or settings?
Click to expand...
Click to collapse
OTApkg does not wipe the phone like a RUU... your sdcard and data are safe
If you do have to RUU back to stock be sure and backup everything as it will wipe the phone.
clsA said:
OTApkg does not wipe the phone like a RUU... your sdcard and data are safe
If you do have to RUU back to stock be sure and backup everything as it will wipe the phone.
Click to expand...
Click to collapse
Ok, I thought so. Unfortunately, I'm getting errors. The OTA just fails on its own, and flashing this zip in recovery does too. It says there is a data error in the file or that there is a problem with buil.prop.
I've tried the latest CWM touch, CWM standard, Recovery_Cingular_US_3.17.502.3.img, andrecovery_m7_att_stock_1.26.502.12.img. I've tried clearing cache and dalvik first, mounting system, and even toggling signature verifcation.
Was going to try temp un-rooting (via SuperSU) next. Hoping I don't have to flash the RUU and start from zero. Any other suggestions?
I'm s-off, htc-dev unlocked.
Added screenshots of install after new download of zip and temp un-rooted, install after mounting system, install after toggling verification. build.prop is definitely in system.
xpurtwitness said:
Ok, I thought so. Unfortunately, I'm getting errors. The OTA just fails on its own, and flashing this zip in recovery does too. It says there is a data error in the file or that there is a problem with buil.prop.
I've tried the latest CWM touch, CWM standard, Recovery_Cingular_US_3.17.502.3.img, andrecovery_m7_att_stock_1.26.502.12.img. I've tried clearing cache and dalvik first, mounting system, and even toggling signature verifcation.
Was going to try temp un-rooting (via SuperSU) next. Hoping I don't have to flash the RUU and start from zero. Any other suggestions?
I'm s-off, htc-dev unlocked.
Added screenshots of install after new download of zip and temp un-rooted, install after mounting system, install after toggling verification. build.prop is definitely in system.
Click to expand...
Click to collapse
you have to RUU back to stock to use OTA update you don't flash it like a rom
read my post here >> http://forum.xda-developers.com/showthread.php?t=2659374
clsA said:
you have to RUU back to stock to use OTA update you don't flash it like a rom
read my post here >> http://forum.xda-developers.com/showthread.php?t=2659374
Click to expand...
Click to collapse
Got it. So in what case would flashing the zip actually work without having to RUU and get the OTA?
xpurtwitness said:
Got it. So in what case would flashing the zip actually work without having to RUU and get the OTA?
Click to expand...
Click to collapse
on a totally stock phone and flashed from stock recovery
clsA said:
on a totally stock phone and flashed from stock recovery
Click to expand...
Click to collapse
This OTA Update Works with ATT-4.18.502.7-Stock-Rooted-ODEX ROM?
Thanks!

Official PD3 Full Stock Firmware Tar

Can't believe I haven't seen any links (for anything for Sprint S7 and S7 Edge) yet....
Gonna try to get older versions too.
https://www.androidfilehost.com/?fid=24533100289591104
(Load all 4 files appropriately. Choose either CSC file. This will wipe data)
Why would we need this since there is no root for this phone yet?
Sent from my SM-G930P using XDA-Developers mobile app
jpet11580 said:
Why would we need this since there is no root for this phone yet?
Sent from my SM-G930P using XDA-Developers mobile app
Click to expand...
Click to collapse
A stock firmware file has many uses other than simply unrooting....
jpet11580 said:
Why would we need this since there is no root for this phone yet?
Sent from my SM-G930P using XDA-Developers mobile app
Click to expand...
Click to collapse
I'm working on a custom port rom for the sprint N4 and I've been waiting for an official tar for a while. This will definitely come in handy!
iBowToAndroid said:
A stock firmware file has many uses other than simply unrooting....
Click to expand...
Click to collapse
Yes it does. Thanks for sharing the link! :highfive:
Is there a guide how to use this in Odin?
Doens't work, you get a eMMC write fail
edit: now my S7 refuses to boot. I can still acesss the download mode, but odin cant seem to flash anything on it.
So my S7 is now useless :\
edit 3: these files are old, thats why they dont work if you've recently updated your phone.
MrBigWaffles said:
Doens't work, you get a eMMC write fail
edit: now my S7 refuses to boot. I can still acesss the download mode, but odin cant seem to flash anything on it.
So my S7 is now useless :\
edit 3: these files are old, thats why they dont work if you've recently updated your phone.
Click to expand...
Click to collapse
Lol. No, PD3 is still BL v2 - you can flash it no matter what current version you're running. And the files are official - they don't harm or corrupt the phone.
eMMC write fail has nothing to do with the files themselves. That's a board-level issue
can we get a re-up
Any chance anyone has these files? I am stuck in boot loop and trying to work around it.
gullymcbillam said:
Any chance anyone has these files? I am stuck in boot loop and trying to work around it.
Click to expand...
Click to collapse
Post a picture of all the info that shows in Download mode and i'll point you in the right direction
https://forum.xda-developers.com/picture.php?albumid=15371&pictureid=58599
This is the link to that photo... thanks for the quick reply!
https://forum.xda-developers.com/picture.php?albumid=15371&pictureid=58600
heres a better copy of that
gullymcbillam said:
https://forum.xda-developers.com/picture.php?albumid=15371&pictureid=58599
This is the link to that photo... thanks for the quick reply!
https://forum.xda-developers.com/picture.php?albumid=15371&pictureid=58600
heres a better copy of that
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=745425885120724020
Use HOME CSC if you don't want to wipe, but a wipe might be needed anyways. So use non HOME CSC if you can afford the wipe

Categories

Resources