Hello,
I just recently rooted my Galaxy Player and flashed CM 10.1 on to it. Everything worked fine except it's buttons were not working. I then used Odin and flashed a kernal on to it to get the buttons working again ( I have done this before when I flashed CWM on to my device and it worked fine ). However the device never booted back up. The device ran out of battery and whenever I turn it on i get an error which is shown in the picture bellow. Can someone please help?
SoBlessed said:
Hello,
I just recently rooted my Galaxy Player and flashed CM 10.1 on to it. Everything worked fine except it's buttons were not working. I then used Odin and flashed a kernal on to it to get the buttons working again ( I have done this before when I flashed CWM on to my device and it worked fine ). However the device never booted back up. The device ran out of battery and whenever I turn it on i get an error which is shown in the picture bellow. Can someone please help?
Click to expand...
Click to collapse
That's forced download mode, Just flash a stock ROM via Odin and you're good to go.
I'm assuming you flashed a pre 4.0 kernel, which is why this happened.
TheKryptonite said:
That's forced download mode, Just flash a stock ROM via Odin and you're good to go.
I'm assuming you flashed a pre 4.0 kernel, which is why this happened.
Click to expand...
Click to collapse
Do you mind giving me a link to where I cant find a stock ROM, which I can flash using Odin and maybe a kernal that works with 4.0?
SoBlessed said:
Do you mind giving me a link to where I cant find a stock ROM, which I can flash using Odin and maybe a kernal that works with 4.0?
Click to expand...
Click to collapse
Stock ROM: http://forum.xda-developers.com/showthread.php?t=1465144
Kernel that works for 4.0: http://forum.xda-developers.com/showthread.php?t=2252851 or http://forum.xda-developers.com/showthread.php?t=2266743
TheKryptonite said:
Stock ROM: http://forum.xda-developers.com/showthread.php?t=1465144
Kernel that works for 4.0: http://forum.xda-developers.com/showthread.php?t=2252851 or http://forum.xda-developers.com/showthread.php?t=2266743
Click to expand...
Click to collapse
Thanks man, you're a life saver
No prob.
TheKryptonite said:
No prob.
Click to expand...
Click to collapse
I just flashed the stock ROM onto my device and now it just keeps on replaying the boot loader, once again I do not know what to do
SoBlessed said:
I just flashed the stock ROM onto my device and now it just keeps on replaying the boot loader, once again I do not know what to do
Click to expand...
Click to collapse
Did you try it more than once?
Anyway, flash this: http://forum.xda-developers.com/showthread.php?t=1445840
After you flash that, go into CMW, wipe data/cache, and flash CM 10.1.
Related
Hey guys,
So i have my S2 for like 6 months now and never had any issue with flashing custom roms/kernels till yesterday. i installed XXKI4 and everything went perfect.
Few hours later i decided to flash CM7( wiped system,data,cache dalvik etc and flashed the zip 2x) so after this i rebooted my phone and it gave a bootloop. I was not able to boot in recovery mode so i had to reflash with odin to a stock rom. Well i did that and i was on stock rom again. i decided to flash the latest speedmod kernel, i flashed it and bam phone not booting, shows the Samsung Galaxy S II GT-i9100 text with the yellow triangle and its stuck at this screen for an hour now. i just cant use ANY custom kernel/rom on my phone because they all give bootloops and i want CM7 so bad. Any idea's and suggestions will be truly welcome.
Stock Samsung Roms are working great, but dont want that ;p
thx!
Coentje44 said:
Hey guys,
So i have my S2 for like 6 months now and never had any issue with flashing custom roms/kernels till yesterday. i installed XXKI4 and everything went perfect.
Few hours later i decided to flash CM7( wiped system,data,cache dalvik etc and flashed the zip 2x) so after this i rebooted my phone and it gave a bootloop. I was not able to boot in recovery mode so i had to reflash with odin to a stock rom. Well i did that and i was on stock rom again. i decided to flash the latest speedmod kernel, i flashed it and bam phone not booting, shows the Samsung Galaxy S II GT-i9100 text with the yellow triangle and its stuck at this screen for an hour now. i just cant use ANY custom kernel/rom on my phone because they all give bootloops and i want CM7 so bad. Any idea's and suggestions will be truly welcome.
Stock Samsung Roms are working great, but dont want that ;p
thx!
Click to expand...
Click to collapse
Have you done 2x flash in a row of CM7? its a know bug (but unknown reasons) it just dosnt start until you flash it 2x in a row.
Suggested method:
1. Enter ClockWorkMod recovery
2. Wipe data/cache factory reset
3. Wipe cache
4. From mount and storage menu, use Format System
5. From advanced menu, use the Wipe dalvik cache
6. Flash CM7 latest nightly
7. Reflash CM7 latest nightly
8. Reboot the phone
Not sure if this can help you, since you experience a problem that is not exactly the one i saw some times on forum (you cant even enter recovery mode after the flash) but this is how usually ppl makes CM7 work
Oh on a side note, i suggest to not use rom manager, it's confirmed (at least, from various posts here on xda) to not be really 100% working on our SGS2 and can cause problems.
If all this isnt working, it may be worth downgrade to KI3 or KH3 stock one, root again and then do the above system.
I can assure you 100% this system works over KI3 and KH3
yep you need to flash 2 x CM7.
First time it will flash very fast.
Go back to the stock rom and then install CM7 again
can you boot in CWM or are you getting some errors ?
Cangir said:
yep you need to flash 2 x CM7.
First time it will flash very fast.
Go back to the stock rom and then install CM7 again
can you boot in CWM or are you getting some errors ?
Click to expand...
Click to collapse
nah, this won't do it, believe me! coz i have exactly same issue with mine. I've done this countless number of times and nothing works... i just came to accept the fact that my phone doesn't support custom anything whether kernel or ROMs, until someone finds out the solution.
meanwhile you can try siyah kernel 1.7.8 or so, it worked with mine, see if it works with yours.
cheers!
henrychukx said:
nah, this won't do it, believe me! coz i have exactly same issue with mine. I've done this countless number of times and nothing works... i just came to accept the fact that my phone doesn't support custom anything whether kernel or ROMs, until someone finds out the solution.
meanwhile you can try siyah kernel 1.7.8 or so, it worked with mine, see if it works with yours.
cheers!
Click to expand...
Click to collapse
i know this problem, my phone was stuck at boot too but i flashed back to stock rom and i fixed my phone. my problem was i can't use cwm its was dead.
i already tried to flash cm7 like 10 times and it doesnt work i can only boot stock roms with the speedmod kernel other kernels give bootloop.
Ugh this is pretty frustrating, will try to downgrade to xxki3.
Btw, after i flashed Cm7 twice my phone bootloops, then when i flash a CWM kernel to boot in recovery mode i get Can't mount /cache/blabla. really weird, i have never seen this on a phone ! =)
Yay its working!! downgraded to XWKI4 and flashed the cwm kernel! now im running CM7! thx peeps! =)
For the other people that had problems, you have to flash the codeworkx kernel because cf root kernel has a modified CWM that is not compatible withCM7
i have almost the same problem,but me i can flash any rom,but the problem is with the kernel my phone refuses to boot on any other kernel else than cf-root and the speedmod,it freezes in the kernel loading so i must turn it off and reflash via odin cf-root or speedmod to get it works again.
teknoman17 said:
i have almost the same problem,but me i can flash any rom,but the problem is with the kernel my phone refuses to boot on any other kernel else than cf-root and the speedmod,it freezes in the kernel loading so i must turn it off and reflash via odin cf-root or speedmod to get it works again.
Click to expand...
Click to collapse
+1, i have the same problem.
Please Help
teknoman17 said:
i have almost the same problem,but me i can flash any rom,but the problem is with the kernel my phone refuses to boot on any other kernel else than cf-root and the speedmod,it freezes in the kernel loading so i must turn it off and reflash via odin cf-root or speedmod to get it works again.
Click to expand...
Click to collapse
Yes, its all the same problem, flashing a rom with a diff kernel won't boot up, will just be stuck on boot logo...
---------- Post added at 12:24 PM ---------- Previous post was at 12:24 PM ----------
Phew! NOW I HAVE CM7 RUNNING ON MY PHONE!!
I'm gonna try to explain how i fixed my issue, as clear and explanatory as i can..
lucky i didn't brick my phone during all this, because I tried so many things and none worked.I unsuccessfully tried downgrading to XWkI4, ZCKI4, and alot others via Odin... after flashing all i get is tons of error messages(on 3e recorvery) E: can't open/cache or E:failed blah bla bla to load /efs... i thought OMG! my phone is bricked! then i recalled reading somewhere that flashing the 3 tar (PDA,MODEM,CSC) files usually should work(maybe better than flashing a 1 tar file), so i found a 3 files xxKI3 rom, flashed it and BAM! it booted up this time without any error. so now i went ahead and rooted it since the tar files came unrooted, then went into CWM to flash cm7 ROM, flashed it twice and ofc i got stuck on boot logo.....i didn't panic much, i pulled out the battery, and restarted to CWM where i cleared cache/ dalvik/ and did wipe/factory reset, then i reflashed CM7 again (twice) and it worked!!!! YES, CM7 is fiannly working on my SG2!
thanks for everyone for helping, and i hope this can help others in same boat as me..
abhigupta7 said:
+1, i have the same problem.
Please Help
Click to expand...
Click to collapse
+1 here also can only get the CF kernel to work. Any rom seems to work but only if the kernel is replaced with CF
andybarron said:
+1 here also can only get the CF kernel to work. Any rom seems to work but only if the kernel is replaced with CF
Click to expand...
Click to collapse
Try what i said and see if it works.
try the siyah 2.1.1 kernel,it solved my problem
Hello, first of all a didn't find similar post.
I have installed cwmr 5.5.0.4. on my i9100, rebooted the phone and the first S2 logo appeaired and than the screen went black, and didn't response. Download mode and recovery mode are working.
Any suggestion?
robin961 said:
Hello, first of all a didn't find similar post.
I have installed cwmr 5.5.0.4. on my i9100, rebooted the phone and the first S2 logo appeaired and than the screen went black, and didn't response. Download mode and recovery mode are working.
Any suggestion?
Click to expand...
Click to collapse
Then you have obviously flashed a incompatible version or kernel. You will need to be more specific about how you flashed and what you flashed.
If download/recovery are working simply flash a compatible kernel. Kernels come with cwm.
TheATHEiST said:
Then you have obviously flashed a incompatible version or kernel. You will need to be more specific about how you flashed and what you flashed.
If download/recovery are working simply flash a compatible kernel. Kernels come with cwm.
Click to expand...
Click to collapse
I'm a noobie, the only thing I did is simply put the phone in download mode and installed clockworkmode recovery 5.5.0.4.
How can I check which kernel is compatible with my phone?
robin961 said:
I'm a noobie, the only thing I did is simply put the phone in download mode and installed clockworkmode recovery 5.5.0.4.
How can I check which kernel is compatible with my phone?
Click to expand...
Click to collapse
I'd like to flash CM 10 but the problem is since i cant turn on the phone i can't sync with the computer.
What should i do?
robin961 said:
I'd like to flash CM 10 but the problem is since i cant turn on the phone i can't sync with the computer.
What should i do?
Click to expand...
Click to collapse
Boot into download mode and then flash Siyah kernel v4 or v5 should be fine, then after flashing kernel reboot into recovery and flash the rom zip of your choice.
TheATHEiST said:
Boot into download mode and then flash Siyah kernel v4 or v5 should be fine, then after flashing kernel reboot into recovery and flash the rom zip of your choice.
Click to expand...
Click to collapse
+1 Siyah will do the job.
Be careful to flash the right version of rom for your phone :fingers-crossed:
Hi guys!
I've a big problem because I modified the hands free and bluetooth mic settings and people can't heard me. I tried to update the rom to stock rom but the problem follow. Now I had installed Cyanogenmod 10.1 and I can't enter in the service mode, please, could you help me how can I enter in to service mode and restore the original mic configuration?
Thanks in advance.
Help please!
jfs_176 said:
Help please!
Click to expand...
Click to collapse
flash a stock rom and see
pasanjay said:
flash a stock rom and see
Click to expand...
Click to collapse
Hi,
I just tried to install a stock rom but the phone didn't start, only works with cyanogenmod 10.1.
BR.
jfs_176 said:
Hi,
I just tried to install a stock rom but the phone didn't start, only works with cyanogenmod 10.1.
BR.
Click to expand...
Click to collapse
then flash a stock based rom like neat rom lite after a full wipe
Yes, I flashed with odin the last stock rom of samfirware, I've done wipe data and wipe cache, and marked repartition, but the phone started and was jammed in the samsung screen, I waited 10 minutes and the phone turned off, then I installed siyah kernel and cyanogenmod 10.1 and the phone was started at the first.
jfs_176 said:
Yes, I flashed with odin the last stock rom of samfirware, I've done wipe data and wipe cache, and marked repartition, but the phone started and was jammed in the samsung screen, I waited 10 minutes and the phone turned off, then I installed siyah kernel and cyanogenmod 10.1 and the phone was started at the first.
Click to expand...
Click to collapse
no i meant flash a stock based custom rom like Neat rom. Not with odin flash it on siyah recovery
OK, I am going to try.
I rooted my SGS2 yesterday and today when I woke up I say the app "SuperSU" with a new icon.
I "clicked" on it and it said something about ... that it will boot into CWM and do something.
It restarted and since then my phone has been unable to boot.
The phone is using "Jeboo" kernel.
Any ideas about how to fix this? Flashing a new kernel?
I am able to get into download mode, but not CWM.
flash the stock firmware by sammy and you will be good to go
converse5 said:
flash the stock firmware by sammy and you will be good to go
Click to expand...
Click to collapse
So, which one?
http://forum.xda-developers.com/showthread.php?t=1075278
Kernel or ROM or both?
From sammobile mate. Lsw is ok
Goliath-2142 said:
I rooted my SGS2 yesterday and today when I woke up I say the app "SuperSU" with a new icon.
I "clicked" on it and it said something about ... that it will boot into CWM and do something.
It restarted and since then my phone has been unable to boot.
The phone is using "Jeboo" kernel.
Any ideas about how to fix this? Flashing a new kernel?
I am able to get into download mode, but not CWM.
Click to expand...
Click to collapse
Exactly the same thing (word by word) just happen to me! have you found a solution?
Flash stock firmware with Odin. About all you can do as phone wont boot into cwm
boot recovery
After flash stock firmware with Odin everything go back to normal.
Installed SuperSu again but when it ask for update the binarys choose the NORMAL option not the CWM one
Are you looking for root? What firmware are you on now?
i have an unrooted unlocked samsung galaxy mega 6.3 gt i9200 from china i tried to flash an arabic rom using odin but it didnt work and now the phone is not working how can i fix it
dexzizo said:
i have an unrooted unlocked samsung galaxy mega 6.3 gt i9200 from china i tried to flash an arabic rom using odin but it didnt work and now the phone is not working how can i fix it
Click to expand...
Click to collapse
What isn't working? Did it flash successfully but not boot? Just do a factory reset. If it didn't flash completely, then you have to let us know what happened before it failed.
es0tericcha0s said:
What isn't working? Did it flash successfully but not boot? Just do a factory reset. If it didn't flash completely, then you have to let us know what happened before it failed.
Click to expand...
Click to collapse
i tried to flash a rom but failed now it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again
dexzizo said:
i tried to flash a rom but failed now it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again
Click to expand...
Click to collapse
Ok, so typically when people say they flashed a rom, that means a custom version through a custom recovery. But you said earlier you tried to install through Odin. This is an important distinction. If you tried to flash a custom rom and it didn't work, then flashing the correct stock firmware through Odin will resolve. If you flashed through Odin and it gave you that warning, then you need to find the right one and re-try.
es0tericcha0s said:
Ok, so typically when people say they flashed a rom, that means a custom version through a custom recovery. But you said earlier you tried to install through Odin. This is an important distinction. If you tried to flash a custom rom and it didn't work, then flashing the correct stock firmware through Odin will resolve. If you flashed through Odin and it gave you that warning, then you need to find the right one and re-try.
Click to expand...
Click to collapse
Yup what i tried to do is flash an arabic rom instead the Chinese stock one but if failed on the phone it said invalid at the end so if i flashed the Chinese stock one back from odin will it work or not
Yes, flashing the original firmware via Odin should get you working again.
es0tericcha0s said:
Yes, flashing the original firmware via Odin should get you working again.
Click to expand...
Click to collapse
will it work if i used samsung kies recovery
Possibly, but if the system had already been modified, I find Odin to be a more reliable fix.
es0tericcha0s said:
Possibly, but if the system had already been modified, I find Odin to be a more reliable fix.
Click to expand...
Click to collapse
well i flashed back the old rom and it worked but now i have no signal and there is no sound what can i go and there is 2 red lines on the top when i open the phone even the wifi doesnt work