I came here after many days trying to fix this phone!
First, I don't know how to work with phones! It was looked due to "Too many tries to unlook it!" and was requesting to connect to one google account to unlook it.
The phone is a generic Spreadtrum SC6820 that has "i9300" writed on the space where the battery goes and its circuit board is marked with the writing L3035_MB_V2.2 and there one stick that reads L3035F-P9600-QUAD-2G-HY-V2.03.B05.
I was unable to find the stock firnware and did not know how to backup it using the ResearchDownload.exe tool available for the Spreadtrum, so I fallowed that very bad tutorial http://forum.xda-developers.com/showthread.php?t=2320640 and I ended with it bricked!
After that, I tried to flash all the roms I could find to see if any would work but all I managed to get is a phone with inverted color scheme, inverted touchscreen, no radio, no BT and no wifi!
If anyone here has the firnware compatible with this phone, please share it, Thanks.
i got the same problam my device has a inverted touchscreen after i flashed its rom using recherche download.please help
Related
Dear All,
I hope someone can help me get out of the situation.
I am using this FEITENG HTM H9001 6 Inches China Phone.
It came rooted by the vendor.
It is a good and nice phone. And I like it alot.
After I install a "font changing" apps,
The phone auto shut off and restart and it stuck at the HTM logo.
So sad Sad.
I know I need to reflash the firmware.
So I did some search on line...............
After finally managed to install the USB's driver which I was not able for quite long....
I follow the instruction on youtube from this site.
Down loaded the flast tool - SP Flash Tool v3.1332.0.sn187
Go to needrom to get a HTM H9001 firmware.
It should be there "right firmware". Someone there on the page where i got the firmware for H9001 said that its stable after he flash it. So proceeded to download it. Safely assume its the correct rom.
Using the flashtool, I followed the flashing steps exactly untill the green sign appeared. I was looking forward to see it start again after the problem mentioned above...........
After pulling out the cables from my PC, I press the power/start button of the phone to check if its ok....BUT It did started but it only shows "whitish color screen"
I can't even see the usual green colour HTM logo when the phone was switched on but I can hear sound of the phone starting... it stays at the whitish screen. And when I touch certain part of the screen the phone seem to response...just that I cannot view the desktop and the icon.. perhaps the video driver was corrupted in some way...or could it be the wrong rom
I proceeded re-flash it again........
same result - white screen.... phone still response to " power switch when press the LCD goes off. and some responsive sounds when the blank screen is touhed...
I am here in hope for some luck in finding ways to recover my phone back to normal...
It all started from installing a font changing apps that corrupted the firmware...than perhaps my action may have complicate the situation further....
Please. Any help would be great.
Thanks so much in advance.
How can I make good back my Feiteng HTM H9001
Or did I got the wrong ROM ?
It did not stae Feiteng just H9001 .
The rom I downloaded for my phone is here for my Feitend HTM H9001.
Is this the correct rom for my phone ?
Appreciate , really needs help to get out from this problem.
I love this phone. I want to make it good again Smile
I will try to upload some image to show its current stae.
many Thanks in advance.
Desmond
So desperate..I uses this MTK Droid tools.
I turn the phone on and it detected the details on my phone.....
Is there any way to use other tools to get my phone back to working like before the "font changing apps" time .... it was working great just before with no problem at all.............
MTK droid can detec the details of my phone...........
BUT i am lost - any way to use Droid tools to save the situation ?
I attached some picture to share what I meant...
Hope some nice great guys can shed some lights so i can try to move ahead..currently really lost... newbies to android phone....
Many Thanks
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Repair HTM H9001
moneycow said:
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Click to expand...
Click to collapse
Hello friend,
if you want to recover your H9001 look this link:
movilesdualsim com htm6582
on the site will explain the steps to solve your problem.
To me it happened to me same thing that has happened to you.
And now I enjoy my H9001 more than ever.
regards
Hello guys,
I have an Star S7189 Phone which I had to return to stock (the owner tried to root but failed and wanted me to get rid of the root), but now that I flashed the stock rom the Display is totally glitchy.
The Device boots fine and I can even flash a custom recovery but even there the screen is glitched. (its basically unusable right now in this state)
I have to return it (working) to the owner.. or he will blame me (understandable)...
I flashed the following rom:
http://www.needrom.com/download/star-s7189s/
because it was the only one I could find that SP-Flashtool would let me flash.. (the other roms are all for MTK6589 but this device seems to be a MTK6582 one - at least thats what SP-Flashtool recognizes it for.
When I ran CPU-Z before all this it said 6589 though.. ?!
---
Usually I manage to fix things, but in this case I'm out of ideas.
When I got the phone it had a newer Firmware Version installed than the one I got now (it was from 2014) but I just cant find any other rom for the MTK6582 model than the one above...
Another weird thing: The sticker under the Battery says Quad 1.6 Ghz - but the MTK6582 is not 1.6 GHz is it?
I really hope anyone can help please !!!!!
I either need another rom or find a way to fix the display... I already thought it might be a hardware issue because even the battery charging screen and the custom recovery screens are affected by the glitches - but it was working alright before.. (with a half assed root which was not working .. or else I wouldnt have tried to flash stock rom anyway...)
HALP!
Additional Infos:
I *think* the rom has the wrong lcd drivers or smth .. because even I can't really "see" them, there seem to be onscreen buttons for menu and back, ALTHOUGH the device has hardware buttons for that - and the old rom didnt have any onscreen buttons showing ....
Please guys, if anyone knows a bit about those MTK china stuff please think of a way how to fix this thing .. I'm really out of ideas..
I have loaded that "MDT Flash Tool" which lets you choose drivers for lcd etc.. but this damn thing does not accept the MTK6582 rom which I need to flash - with MTK6589 roms (which do not work for the device) it opens them fine...
This could be the first soft-brick that I really cant fix ........and its due to lack of files it seems..?
Any way that I could "mod" the rom to get the display working?
bought a phone advertised as ulefone u692.
tried to flash cwm to devive , lost recovery.
tried to flash stock firmware to device in hope of fixing afore mentioned problem.
epic fail phone boots but screen is black.
after many attempts and downloading numerous roms and flashing numerous file....finally get it to boot but with several driver issues! many sensors not detected.
what i have found out is the screen is 1920x1080 as opposed to the ulefone u692 which has 1280x720, hence the black screen issue.
everything else says it is right apart from screen resolution.
i do hear cpu info can be faked, how do i check my real cpu info?
would it be possible to add the screen driver to the stock u692 kernel?
thanks.
Hi bro
Please remember , always backup all partitions first on unknown mtk phones.
i wonder your IMEI isn't lost too,
try this tool -> http://forum.xda-developers.com/showthread.php?t=2160490
Don't buy copycats....
Hello after trying to use SPFLASH TOOL to flash my device because i had logo screen loop i end up formating everything and now my phone doesn't start but if i plug in to my computer i can hear the sound of plug in and out, i can still use spflash tool but i have black screen on my phone so i'm here asking for someone to help me find a way to fix this, do i have to build a new rom or system? Just tell me what to do because after Searching the whole internet after my phone i can't find much stuff.
Any help would be appreciated.
What phone model is it bro?
Sorry for not answering in time bro but i finally fixed my phone i had to reinstall like re-flash the entire phone.
My phone is a Qilive Q4 |7 auchan but i already fixed my problem i had trouble finding the stock rom for it since qilive aparently doesn't have any kind of support page but lucky that i found it.
Thanks anyway.
Hello. Is anyone there has a stock firmware for Jlinksz T906 ZH960. I flashed all the firmware that I can find here on XDA as well as other sites. The reason for this is because I'm finding a TWRP for this device to be flashed using SPFT. After I find one that fits my device, I immediately go to SPFT to flash it. But as I click the Download button, an error appears (something like PMT error) so I fix it by doing a FORMAT (worst thing that I did in my life) without backupping the rom because I am so sure that the firmware on this forum is actually gonna work for my device (which I realized it isn't). After formatting I can't open the device so I flashed T906 stock firmware (from the link above). After I flashed it, a lines on the screen appeared. This is the time that I realized that I'm f****d. So I went to Google and search for some more roms for T906 and I found this one that has a download link for a dump rom I think (the only firmware that I tried so far that has the display working properly). I downloaded it, flashed it and an error appears on the device "boot error!!!!!". After days and days of non-stop searching (went to some Russian and Chinese sites) on how to repair my bricked device it is time to ask for help. I flashed all the roms that I could find but only with this problem: black screen then suddenly turns off, a red or blue lines on the screen.
I recently found out that whenever I flashed the uboot.bin and pro_info of the rom with working display on some of the firmwares that I found, the display is working but the "boot error!!!!!" still haunt me.
Please, I need this device for online classes. If there's someone that can help, please.
See the attached image. That is the board model and the chips and all.
Before the problem (the time that I can fully use the device) I saw that it has an Android 9.0 Pie which is probably fake because I know for sure that it was KitKat.
Info on the back of the board:
ZH960-vEN000P
ZH960 TB-v4.1
B20200430_M116
ZH107ATB V4.1
Near the simcard tray:
ZH906-MB-v4.1
Jlinksz T906 tablet model
All help is appreciated
Thank you!