Related
After I turn on my Galaxy S II and it hangs for a few seconds and it reboot again and again..
Sometimes stuck on the home screen..
I really don't know why will this happen to my phone. I'm going to trip tomorrow..anyone can help me?
Model : GT-I9100
Android version : 2.3.3 (Stock ROM)
Rooted
garylaw said:
After I turn on my Galaxy S II and it hangs for a few seconds and it reboot again and again..
I really don't know why will this happen to my phone. I'm going to trip tomorrow..anyone can help me?
Model : GT-I9100
Android version : 2.3.3 (Stock ROM)
Rooted
Click to expand...
Click to collapse
boot to recovery,wipe cache and factory reset.
EDIT:Hold "home+volume up+power" all at the same time until recovery menu appears.
reflash with odin some stock firmware if you don't want to wipe, if there is no problem with wiping, just go to recovery and do a factory reset...this has a strong chance of success.
cooza said:
boot to recovery,wipe cache and factory reset.
EDIT:Hold "home+volume up+power" all at the same time until recovery menu appears.
Click to expand...
Click to collapse
borstri said:
reflash with odin some stock firmware if you don't want to wipe, if there is no problem with wiping, just go to recovery and do a factory reset...this has a strong chance of success.
Click to expand...
Click to collapse
After I hard reset and wiped cache..its still reboots..
Someone help me!! :'(
now it looks that only solution is to reflash, go to
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=7#regiona
or
http://forum.xda-developers.com/showthread.php?t=1113928
find something u like and flash it with odin.
http://forum.xda-developers.com/showthread.php?t=1110160&highlight=odin+how+to
dont bother wit finding of exact fw. for you, find something that is for your region....
Is it flash it by using odin?
apsolutley with odin, since I suppose that you don't have cwm packed rom on SD card, because in that case does not matter if you have cwm recovery or not..., dont know if you have done it before...bat after beginners fear, it is actually peace of cake...dont be afraid, just follow instructions to the letter...
borstri said:
apsolutley with odin, since I suppose that you don't have cwm packed rom on SD card, because in that case does not matter if you have cwm recovery or not..., dont know if you have done it before...bat after beginners fear, it is actually peace of cake...dont be afraid, just follow instructions to the letter...
Click to expand...
Click to collapse
After I flashed it, it turns to the CWM screen and install the Multi-csc..something like that..and it reboot..after it reboot..its still turns to CWM and install the multi-csc.
So what should I do now?
you have done something wrong, or taken wrong rom image, since after flashing with ODIN stock rom you WILL ENDUP with stock recovery! Dont know what you flashed, but it was not stock rom.
What rom you took exactly??
"GT-I9100_SIN_I9100DXKI2_I9100OLCKH1_I9100DXKI1"
I flash this..is this a boot loop or other problem?
Hey dude, thanks for helping me so much..
My phone is working now..but I have to download my things again..=(
Alright. Thanks!
no problem, been in that situation. check some custom roms when u have time....you'll be amazed what this device can do.
and in clockwork recovery you have backup and restore, setup phone just how you like it, make a CWM backup and you are always sure that rescue is there....don't need odin or PC for that.
Flash Supercore with odin as PDA or some other kernel that has CWM recovery
The problem occured again just now, its after i dpwnlpad some apps from market..and its still not completely remove the hanging problem..And my laptop died. LOL.
Anyone here?
May i sugest u reflash stock rom and return it to the store.
If u have random reboot after flashing stock rom there is obviouse something wrong with your device.
hi
my gs2 turns on and reboot repeatly when i put micro sd card and install app in sd card .
help me too .
sorry for bad english .
garylaw said:
After I turn on my Galaxy S II and it hangs for a few seconds and it reboot again and again..
Sometimes stuck on the home screen..
I really don't know why will this happen to my phone. I'm going to trip tomorrow..anyone can help me?
Model : GT-I9100
Android version : 2.3.3 (Stock ROM)
Rooted
Click to expand...
Click to collapse
Your kernel is it also stock?
well, i tried to install cyanogen mod 7.2 official with no succes
i downloaded the files needed (gapps and cyanogen) put in sd card and i turn off phone then boot up again while pressing home.
i wipe factory reset + user data
then i went in sd card and install both gapps and cyanogen(first) afterwards i reboot the phone. my phone boot normally, it displays samsung and then it displays android and stuck on it..... and when i try to turn the phone off it turn on by itself again . i have to remove battery so that it wont turn on again... help plz need to know what to do ><
i bet u didnt do a " wipe cache partition" try it and report.....and remember that the first boot takes a bit long( the cm7 boot animation goes on and on )
and is your phone gt s5830 or gt s5830i???? bcoz the cm7 rom is ONLY for gts5830
reply fast...
Are you sure you did that with Cwm 5, and not the stock recovery???
If not, install Cwm 5, wipe everything, install Cm 7.2, reboot.
Then reboot again in recovery, and install Gapps.
Done!
Edit: Don not forget to mount system and data before flashing gapps.
Sent from my GT-S5830 using xda premium
when i enter recovery system (home + power)
in yellow appling multi csc E: failed to mount system invalid argument
and each time i wipe cache partition/ data factory reset : rfs format failed on /dev/st113
and /dev/st114
but i tried to install cyanogem 7.2 then reboot and then my phone boot normally but stuck on android
like it shows a black screen and on the center it shows android(in white)....
MadDoxX_imba said:
when i enter recovery system (home + power)
in yellow appling multi csc E: failed to mount system invalid argument
and each time i wipe cache partition/ data factory reset : rfs format failed on /dev/st113
and /dev/st114
but i tried to install cyanogem 7.2 then reboot and then my phone boot normally but stuck on android
like it shows a black screen and on the center it shows android(in white)....
Click to expand...
Click to collapse
PLZ help me ><
MadDoxX_imba said:
PLZ help me ><
Click to expand...
Click to collapse
u still didnt answer this question from earlier guy who ask
Darvadouille said:
Are you sure you did that with Cwm 5, and not the stock recovery???
Click to expand...
Click to collapse
so let me ask again, on what recovery are u on? stock? cwm 4? cwm 5?
an0nym0us_ said:
u still didnt answer this question from earlier guy who ask
so let me ask again, on what recovery are u on? stock? cwm 4? cwm 5?
Click to expand...
Click to collapse
i dont know what that means, i followed a guide i found on the internet.
i didnt had cwm 4 neither stock or whatever.... i had android and the guide told me to download cwm 7.2 + gapps and report with home+power and wipe user partition and wipe factory reset and then install cwm from sd... now my phone just display android on screen each time it boot and stuck on it zZz
anyone can tell me what to do plz? i just want to get my phone working again TT
Yeah right. Nowadays people never stop to amaze me. U want to flash cm yet u didnt even know what recovery u use. Didnt the tutoriual u followed mention anything about cm roms needs cwm recovery?
Now my advice would be flashing stock rom via odin and stay with it before u do any more damage to the poor phone. look in the sticky thread or in the dev subforum howto flash stock rom via odin.
an0nym0us_ said:
Yeah right. Nowadays people never stop to amaze me. U want to flash cm yet u didnt even know what recovery u use. Didnt the tutoriual u followed mention anything about cm roms needs cwm recovery?
Now my advice would be flashing stock rom via odin and stay with it before u do any more damage to the poor phone. look in the sticky thread or in the dev subforum howto flash stock rom via odin.
Click to expand...
Click to collapse
just a last question, is it possible to flash pphone via sd card? cuz i dont have wires to connect my phone to pc ><
Nope, not possible. U need a working pc with windows and a usb cable if u wanna flash stock rom via odin.
ok thx i gonna give it a try as soon i got a usb cable for my phone.
Im new to site.i m using GALAXY TAB 10.1 P7500..I have stock ICS and rooted.
i tried to install CM 10,It shows error msg while installing.status 7.installation aborted.after that my tablet wont booting.it shows upto samsung Galaxy Tab 750.
I cant able to switch off the tab.if i continuously pressed the power buttons,it is restarting.
now,can i install stock ICS by odin to this tab???
or else there is other method to restore my tab
pls reply
procedure i did.
>transfer the downloaded file to sd card folder
>I entered into recovery mode and wipe data,then wiped cache and format/system folders
>then i clicked install from sd card option
>It shows error status 7-installation aborted.
akardr23 said:
Im new to site.i m using GALAXY TAB 10.1 P7500..I have stock ICS and rooted.
i tried to install CM 10,It shows error msg while installing.status 7.installation aborted.after that my tablet wont booting.it shows upto samsung Galaxy Tab 750.
I cant able to switch off the tab.if i continuously pressed the power buttons,it is restarting.
now,can i install stock ICS by odin to this tab???
or else there is other method to restore my tab
pls reply
procedure i did.
>transfer the downloaded file to sd card folder
>I entered into recovery mode and wipe data,then wiped cache and format/system folders
>then i clicked install from sd card option
>It shows error status 7-installation aborted.
Click to expand...
Click to collapse
What cwm and bootloader do you have installed?? you need the 6.1..... cwm and the ICS bootloader from http://droidbasement.com/db-blog/
And yes you can go back to stock ics by using odin, wipe data/cashe/dalvik and then flash the cwm in odin, the bootloader in odin, kernel isn't needed because it's a build-in kernel and then the ROM
Thanks 4 ur reply sir...i used CWM 5.8. and i didnt installed bootloader.sry i dont know sme technical terms.i updated official ics from samsung .and rooted by odin.
Can u give/post the link for 6.1cwm????whether i install any kernel separately???
and also my tab not booting .It always shows Samsung galaxy Tab p750 neither start nor off
DefQoN_BE said:
What cwm and bootloader do you have installed?? you need the 6.1..... cwm and the ICS bootloader from
And yes you can go back to stock ics by using odin, wipe data/cashe/dalvik and then flash the cwm in odin, the bootloader in odin, kernel isn't needed because it's a build-in kernel and then the ROM
Click to expand...
Click to collapse
Can u give/post the link for 6.1cwm????whether i install any kernel separately???
and also my tab not booting .It always shows Samsung galaxy Tab p750 neither start nor off..
can u tell how i use stock ICS by odin?where i get this?
akardr23 said:
Can u give/post the link for 6.1cwm????whether i install any kernel separately???
and also my tab not booting .It always shows Samsung galaxy Tab p750 neither start nor off..
can u tell how i use stock ICS by odin?where i get this?
Click to expand...
Click to collapse
http://droidbasement.com/galaxy/roms/cm10/p4wifi/
For cwm 6.1, download the recovery.tar and the bootloader4_0_4, flash it on odin on the PDA section, BUT ONLY USE CM10 with THIS!!!! Also download the ROM and also flzdh this under PDA
you can find stock ics firmware on http://www.sammobile.com/firmware/ stock firmware should revert everything, unroot/unbrick
DefQoN_BE said:
For cwm 6.1, download the recovery.tar and the bootloader4_0_4, flash it on odin on the PDA section, BUT ONLY USE CM10 with THIS!!!! Also download the ROM and also flzdh this under PDA
you can find stock ics firmware on stock firmware should revert everything, unroot/unbrick
Click to expand...
Click to collapse
thank you sir.i flashed correctly now.but after reboot the load screen with the Cyanogen Mod 1o boot screen. It will loop the load screen for 20min..whether i should wait or any wrong???
I update my s3 to 4.2 but the human features r not working. Plz suggest what. To do?
Sent from my GT-I9300 using XDA Premium App
akardr23 said:
thank you sir.i flashed correctly now.but after reboot the load screen with the Cyanogen Mod 1o boot screen. It will loop the load screen for 20min..whether i should wait or any wrong???
Click to expand...
Click to collapse
try to wipe data/factory reset and wipe cache after the you flash the CM rom
bearwards said:
try to wipe data/factory reset and wipe cache after the you flash the CM rom
Click to expand...
Click to collapse
thank you so much..it s working...jb s so smooth and quick ,but cant able to make voice call..so restore back to ICS.
I installed cm10 p4 experimental along with bootloader,recovery and modem.If i installed that modem,i cant make voice call in galaxy tab 10.1 3G.
If i followed the procedures in this link http://forum.xda-developers.com/showthread.php?t=1875024 ..they told to install another modem.when i installed that modem,boot loop problem occuring .
what to do???
Whether it is necessary to install modem[given with CM10 rom]?
My Galaxy gio is rooted and is with a clockworkmod recovery. Yesterday, I tried to flash a custom kernel. After flashing successfully (through cwm recovery), i reboot my phone and then it stuck at boot screen.
I did many searches but cannot understand any.
I can go into recovery and download mode which is i think so required by odin.
I wonder if I can flash any stock rom again easily. Can anyone provide me with a zip file with which i can put in sd card and install zip through cwm recovery by which i can unbrick my phone. I tried wipe data and factory reset but nothing worked. Plz help:crying:
usama36 said:
My Galaxy gio is rooted and is with a clockworkmod recovery. Yesterday, I tried to flash a custom kernel. After flashing successfully (through cwm recovery), i reboot my phone and then it stuck at boot screen.
I did many searches but cannot understand any.
I can go into recovery and download mode which is i think so required by odin.
I wonder if I can flash any stock rom again easily. Can anyone provide me with a zip file with which i can put in sd card and install zip through cwm recovery by which i can unbrick my phone. I tried wipe data and factory reset but nothing worked. Plz help:crying:
Click to expand...
Click to collapse
your best chance would be ODIN
but you can download any other rom from gio forum and flash it i think it should work properly
ngoralph said:
your best chance would be ODIN
but you can download any other rom from gio forum and flash it i think it should work properly
Click to expand...
Click to collapse
Well, odin is a lot complicated. Can you please give any gio rom link that would work? I flashed the kernel, not rom so will it work?
anyone help me? Does flashing another rom or kernel help me unbrick my phone? Any kernel's or rom's zip file please for my gio? Reply please
usama36 said:
anyone help me? Does flashing another rom or kernel help me unbrick my phone? Any kernel's or rom's zip file please for my gio? Reply please
Click to expand...
Click to collapse
You can better go to the Gio Q&A/General section
And ask again.
There are more experienced people over there.
Verzonden door mijn GT-I9300 met xda premium
Hi
I have a Samsung Galaxy Pocket Neo GT-S5310...
The sad thing is that, a while ago it stopped working and now it's stuck on the boot screen (Samsung GALAXY POCKET Neo GT-S5310)
I have tried to perform a factory reset through the built-in recovery mode (volume up + home + power), but unfortunately, I couldn't access the recovery mode and the phone goes directly to the boot screen.
And since the only thing I could do was accessing the Download Mode, so I tried to recover it by installing an official firmware with Odin3_v3.07... but it didn't solve the problem...
So what would you guys suggest?
can't delete this reply... could an admin please do it?
Installing cwn recovery and flash rom
D-Moon said:
Hi
I have a Samsung Galaxy Pocket Neo GT-S5310...
The sad thing is that, a while ago it stopped working and now it's stuck on the boot screen (Samsung GALAXY POCKET Neo GT-S5310)
I have tried to perform a factory reset through the built-in recovery mode (volume up + home + power), but unfortunately, I couldn't access the recovery mode and the phone goes directly to the boot screen.
And since the only thing I could do was accessing the Download Mode, so I tried to recover it by installing an official firmware with Odin3_v3.07... but it didn't solve the problem...
So what would you guys suggest?
Click to expand...
Click to collapse
The only way to :cyclops: the problem is to install cwn recovery and flash another rom .
see this thread to install cwn http://forum.xda-developers.com/showthread.php?t=2728655 ::silly:
and try this rom http://forum.xda-developers.com/poc...om-cm-11-0-galaxy-pocket-neo-duos-gt-t2833952
see this thread to find other rom http://forum.xda-developers.com/showthread.php?t=2731774:p
wipe data then flash the original FIRMWARE
Ashish1998 said:
wipe data then flash the original FIRMWARE
Click to expand...
Click to collapse
How can I wipe data if I can't access the recovery mode... :/
D-Moon said:
How can I wipe data if I can't access the recovery mode... :/
Click to expand...
Click to collapse
hey bro..
:silly: installing cwn recovery via download mode is the only way to bring back ur device
sksenthil said:
hey bro..
:silly: installing cwn recovery via download mode is the only way to bring back ur device
Click to expand...
Click to collapse
actually the only way would be flashing the bootloader, unfortunately I couldn't find it anywhere... the official firmware (from sammobile or samsung-updates) does not contain the bootloader flash...
Download stock from sammobile.com and flash it via Odin
Hackerpunk1 said:
Download stock from sammobile.com and flash it via Odin
Click to expand...
Click to collapse
read my previous reply... :/
D-Moon said:
read my previous reply... :/
Click to expand...
Click to collapse
What are the files in the firmware you downloaded?
Hackerpunk1 said:
What are the files in the firmware you downloaded?
Click to expand...
Click to collapse
S5310XXAMK1_S5310OJVAMK3_S5310XXAME1_HOME.tar.md5
and
SS_DL.dll
Which version of Odin are you using?
Hackerpunk1 said:
Which version of Odin are you using?
Click to expand...
Click to collapse
3.09
Sent from my GT-I9300 using XDA Free mobile app
Just load the file "S5310XXAMK1_S5310OJVAMK3_S5310XXAME1_HOME.tar.md5" ONLY in the PDA section. Please make sure you have the right drivers installed.
stuck in bootloop ...
Hi all, i can't find topic for Samsung s5303, and i have a problem with this device.
someone can help me ?
→ the phone stuck in bootloop ←
- i can start in download mode and get connected in odin.
i had flash all the 12 roms that i have found, (including custom roms and stock roms, only one package/ full package using re-partition with .PIT files. and various kernel models)
i made all wipes, (after and before flash a rom)
when the phone try to boot up, don't appear nothing about
errors (like can't mount data reboot or others...)
the phone try to boot up and keep in samsung logo, after 30 seconds i have a full shutdown, are not possible to turn on using power button..
if i take off the battery and reinsert after 1 minute, phone try to turn on and repeat the same thing
(have happened in all firmwares found)
are a hardware problem ?
may be someone have an idea to fix this issue?
since now, thanks.
Cant boot to recovery
Hi sorry for the thread revival but I have run out of ideas. Same problem as OP. Odin flash is successful but stuck on samsung logo when trying to boot to recovery.
S5310i 4.4.2
Any suggestions would be much appreciated. Anyone found a solution to this?
When you use Odin to flash, when it has finished, it always boot to recovery, there you have to wipe data and cache, then it works properly!
Hackerpunk1 said:
When you use Odin to flash, when it has finished, it always boot to recovery, there you have to wipe data and cache, then it works properly!
Click to expand...
Click to collapse
After flashing recovery with odin I am still stuck at the S5310 Neo splash screen unable to boot into recovery. Has this maybe got something to do with a conflict between android versions? As the S3510i comes with 4.4.2 stock, not 4.1.2.
Did you tried using the pit file for re-partitioning?
Hackerpunk1 said:
Did you tried using the pit file for re-partitioning?
Click to expand...
Click to collapse
Thanks for your help. Could you please explain more about this? Where would I find the pit file to flash? Do I tick re-partition in odin? Never flashed pit before. worried about bricking the device.
I am struggling to find the PIT file for my specific device (S5310i). its only on a handful of websites asking for paid subscriptions. Could anybody possible direct me to where I can find:
CORSICAVE3G_EUR_OPEN. Pit
I have downloaded the corsicass.pit and S5310_corsicass.pit but am not sure if this will work on any S5310 variant?