Lockscreen/Keyguard Disabler
What is lockscreen disabler and what do I need it for?
Sometimes you may face the problem that you are forced to setup a device pin or password everytime you want to unlock your phone.
There may be different reasons: some companies require such protections when you want to receive emails onto your mobile device.
Another public reason is: you want to use VPN on your Android smartphone. To setup a VPN you are forced by the system to setup some kind of security.
This module is for all the users who don't want to be forced to use a protection, although using the services descriped above.
Disclaimer: I am not responsible for any damages to you or your device, nor for any consequences that result from using this mod.
This mod is intended for testing purposes and not for bypassing security policies or guidelines in your everyday (work-)life.
Long story short: here it is now: A module that simply hooks into the lockscreen's callback, wether there is a password required and mocks, that there is no password needed for unlocking the device. As the password is still active in the background, other apps (especially the apps that enforce such password policies) will never notice this little hack.
There are no app-permissions required.
Installation
Install the Xposed Framework, install the APK and enable "Keyguard Disabler" from the module overview in the Xposed App. After a restart you can start using the standard Android "Slide-to-Unlock" again.
Download
Link to this mod in the Xposed Module Repository
Source code
Find the source code on github!
New Settings-Interface V1.3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supported Devices
The module should work with the following Android versions
Any pure AOSP android version (Stock, ParanoidAndroid, Cyanogenmod, etc.)
HTC devices or devices running a ROM with Sense 5 or Sense 6
Samsung Touchwiz devices are reported to work
Credits
Thanks to:
@sirlatrom and @gsamtan for their very good support with this module, because it wouldn't be what it is now without their help!
XDA:DevDB Information
Lockscreen Disabler, App for all devices (see above for details)
Contributors
LucasR93, Sirlatrom, gsamtan
Source Code: https://github.com/LucasR93/android-lockscreen-disabler
Version Information
Status: Stable
Current Beta Version: 1.4.2
Beta Release Date: 2014-08-24
Created 2013-12-27
Last Updated 2015-03-10
Nice, worked on my Nexus 5 with stock 4.4.2. Do you think it would be possible to enable/disable lockscreen keyguard without the need of a reboot? That combined with Tasker integration would be awesome (no idea if that is even possible), as the option with Secure Settings isn't always working..
But as the module is now it worked perfect for its purpose.
I think we are working for the same company . Anyway, did not yet install you. But any idea what to install on top of this to have some sort of security? Like a second pattern unlock. Had it like that on iPhone.
Exchange password hacked and installed android pattern.
Sent from my LG-D802 using Tapatalk
skifyr123 said:
Nice, worked on my Nexus 5 with stock 4.4.2. Do you think it would be possible to enable/disable lockscreen keyguard without the need of a reboot? That combined with Tasker integration would be awesome (no idea if that is even possible), as the option with Secure Settings isn't always working..
But as the module is now it worked perfect for its purpose.
Click to expand...
Click to collapse
I'm glad it is working for you. The next update will have the possibility to quickly enable/disable the "hack" without the need for a reboot.
A little 1x1 widget would be nice, too, just like a quick toggle on the homescreen, time based automatic enabling/disabling,.... there are a lot of thing that could be implemented
PAGOT said:
I think we are working for the same company . Anyway, did not yet install you. But any idea what to install on top of this to have some sort of security? Like a second pattern unlock. Had it like that on iPhone.
Exchange password hacked and installed android pattern.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Maybe you can use some 3rd party apps like LockIt to add some security to your company's email account? I don't know how secure it is. Adding a second lock might be possible, but it would also be 3rd party, as the native lockscreen is still running with you password protection.
If you have any other ideas to make it useable for you, just leave me a message here
@LucasR93 doesn't work on my galaxy y duos,stock gb 2.3.6. i've attached debug log for your ease.
Great work dev:good:
killoid said:
@LucasR93 doesn't work on my galaxy y duos,stock gb 2.3.6. i've attached debug log for your ease.
Click to expand...
Click to collapse
Thanks for your log - it seems to be 4.3+ exclusive at the moment, as in earlier versions of Android the keyguard worked different. I need to read through the sources of Gingerbread and ICS to find points to place a hook for the older Android versions.
LucasR93 said:
Thanks for your log - it seems to be 4.3+ exclusive at the moment, as in earlier versions of Android the keyguard worked different. I need to read through the sources of Gingerbread and ICS to find points to place a hook for the older Android versions.
Click to expand...
Click to collapse
thanks dev.will be looking forward to it.
Not working on my note 2 with probam 4.2.2 Rom.
I get can't sign in in the email app and the certificate is gone from the email setting.
Thanks.
myakove said:
Not working on my note 2 with probam 4.2.2 Rom.
I get can't sign in in the email app and the certificate is gone from the email setting.
Thanks.
Click to expand...
Click to collapse
That's interesting, because this mod doesn't even touch your email app, passwords, certificates or anything else.
I will try again after clean ROM installation.
After clean install I have the same problem, can't login in email app if this mod is active. Disable the mood and the email work again.
I am totally a fan of your efforts- I too am in this boat and it annoys the crap out of me.
We use IBM Lotus Notes (unfortunately) cuz our upper-mgt is stuck in the 1980's when it comes to tech-mentality.
The IBM Lotus Traveler app had device admin control to enforce a lock screen password.
I have researched and tried so many patches, fixes, work-arounds, etc., and NOTHING has worked thus far.
I think I can create something in Tasker to accomplish what I want, but I'm new to Tasker and don't quite know how to build the right setup yet.
But I am fully motivated to ultimately find something that will work.
I was excited to see this Xposed Module. Unfortunately...it didn't work for me.
Maybe I am doing something wrong, but I will keep an eye on this post for any updates/fixes.
Thanks again for the effort on this front.
AddamsonFlint said:
I am totally a fan of your efforts- I too am in this boat and it annoys the crap out of me.
We use IBM Lotus Notes (unfortunately) cuz our upper-mgt is stuck in the 1980's when it comes to tech-mentality.
The IBM Lotus Traveler app had device admin control to enforce a lock screen password.
I have researched and tried so many patches, fixes, work-arounds, etc., and NOTHING has worked thus far.
I think I can create something in Tasker to accomplish what I want, but I'm new to Tasker and don't quite know how to build the right setup yet.
But I am fully motivated to ultimately find something that will work.
I was excited to see this Xposed Module. Unfortunately...it didn't work for me.
Maybe I am doing something wrong, but I will keep an eye on this post for any updates/fixes.
Thanks again for the effort on this front.
Click to expand...
Click to collapse
In a similar situation here. I might have to add that I tried in 4.3.
AddamsonFlint said:
I am totally a fan of your efforts- I too am in this boat and it annoys the crap out of me.
We use IBM Lotus Notes (unfortunately) cuz our upper-mgt is stuck in the 1980's when it comes to tech-mentality.
The IBM Lotus Traveler app had device admin control to enforce a lock screen password.
I have researched and tried so many patches, fixes, work-arounds, etc., and NOTHING has worked thus far.
I think I can create something in Tasker to accomplish what I want, but I'm new to Tasker and don't quite know how to build the right setup yet.
But I am fully motivated to ultimately find something that will work.
I was excited to see this Xposed Module. Unfortunately...it didn't work for me.
Maybe I am doing something wrong, but I will keep an eye on this post for any updates/fixes.
Thanks again for the effort on this front.
Click to expand...
Click to collapse
@AddamsonFlint
Hi, thanks for your feedback. We also use Lotus Traveler and it is horrible to have these passwords. I'm sorry that it is not working for you. What device and Android Version do you use? Can you provide the log that you can find in the xposed app under menupoint log? Would be very helpful for further investigation in our enemy
sirlatrom said:
In a similar situation here. I might have to add that I tried in 4.3.
Click to expand...
Click to collapse
@sirlatrom
Okay that is really interesting, because you are the first 4.3 tester who gives feedback here. If you could provide me with your device name and the log files from inside the xposed app I can start troubleshooting. Thank you!
Galaxy S3 stock 4.3 not working for me either. How do I get the log for you sir?
Could you include an option for disabling the lockscreen altogether? I want to use this in combination with NFCSecure, and it's better now without the password, but it's still not quite perfect.
Again, as is it's amazing.
@sirlatrom
Okay that is really interesting, because you are the first 4.3 tester who gives feedback here. If you could provide me with your device name and the log files from inside the xposed app I can start troubleshooting. Thank you!
Click to expand...
Click to collapse
I disabled all other modules, restarted my HTC one Sense edition running Maximus HD 21.0 (Android 4.3) and still I had to type my pin. I tried changing to password instead of pin, but no luck.
Here's the scarce log output. Obviously I'm using version 1.1 of your module.
-----------------
Dec 31, 2013 11:22:36 AM UTC
Loading Xposed v42 (for Zygote)...
Loading modules from /data/app/com.lr.keyguarddisabler-1.apk
Loading class com.lr.keyguarddisabler.Lockscreen
Sent from my HTC One using Tapatalk
LucasR93 said:
@AddamsonFlint
Hi, thanks for your feedback. We also use Lotus Traveler and it is horrible to have these passwords. I'm sorry that it is not working for you. What device and Android Version do you use? Can you provide the log that you can find in the xposed app under menupoint log? Would be very helpful for further investigation in our enemy
I am on Stock MJ4 for the Sprint Note 3, which is 4.3
Like I mentioned in my original post, I think a Tasker setup in place might do the trick, I just don't know Tasker very well yet, in order to create what I want. I found posts describing how to disable screen lock, but they were all about how to create a setup to do it when on your home (or another secure) wifi access point. However, I think the task would be the same, just needing a different profile.
The task would be for screen lock which you would set to "off." For the profile, instead of creating something to look for and verify a secure wifi point, you would create a profile to simply be when the device is in an "on" status, which...as long as your phone is powered up, the Tasker setup would make sure you never went into lock and had to enter your pin. You can setup (at least on my phone) to have pin AND swipe at the same time, and it was the same on my E4GT. So then you would have some sort of cover to make sure you weren't pressing buttons in your pocket, but just have to swipe to open, instead of the additional security BS.
Your thoughts on this avenue?
Also, I'd be interested to know what you were making program-wise to fool or fake the system. Whatever it is, I'm guessing maybe that Lotus Traveler either doesn't recognize it or see it.
There is that one Xposed Module, "app control" I think, that lets you go down the entire list of an app's permissions and uncheck whichever ones you want. The next thing I was going to do was go through a process of elimination, and see A. which permissions I can uncheck where the app will still run. And B, out of these permissions I can disable without crashing the app, which of them very well may be linked to some sort of lock-screen status checker. If both you found the permission that controlled it, and could disable it without disabling the entire app, I think that would work.
Thoughts here as well?
Click to expand...
Click to collapse
Could this module disable VPN requirement for secure unlock pattern?
Related
This project has been put on hold indefinitely. You will NOT be able to connect to the service.
Hi.
Shake2Send is an application I made that allows two devices to pair and send contacts over the air.
To pair, the two devices shake at the same time (Similar to Bump for the iPhone). No bluetooth needed!
You can send contacts, as well as files.
Pictures will be displayed automatically, and CABs will auto install.
Version 1.0.1 released!
Instructions
Download the CAB.
Install.
Enter a name (Be unique for each device!)
Press Connect, and then shake both devices at the same time (Or within ~1 second).
When paired, Press Send and select a contact or file.
Known Issues
1. File sending is slow, try not to send big files (yet.)
2. Possible connection problem... still not sure on the details.
...More when I get more feedback
Changes
Latest version: 1.0.1
Better Auto connection
Bug fixes.
Better error messages
Some new artwork (not that different...)
Some internal code changes (Dynamic DNS, etc)
Better CAB File.
--0.61 Bug fix. Not an actual release.
0.6 Changes:
-Bug fixes, including the sending error.
-Some UI fixes and improvements
-Instructions picture
-File sending!
-Support for displaying pictures, and for auto-installing CABs.
Upcoming Features
1. Advanced options
2. Better looking UI
3. Auto-connect
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Video: http://www.youtube.com/watch?v=gFJtbIXp7cs
Notes
1. You CAN use this app on non-gsensor devices. You will need to press Pair instead, and uncheck Use G-Sensor on the connect screen.
2. You will need .NET Compact Framework 3.5 in order to use this app.
3. If you want to host a private server for yourself (or prehaps a group of people), you still can download the server here:
http://windowsphonehacker.jaxbot.com/files/shake2send_server.php
But you will not receive automatic updates.
Download
Version 1.0.1 CAB: http://windowsphonehacker.com/shake2send/
Enjoy, and give me feedback!
If you like this, and want to see more changes, please Donate!
Neat app. Hope this helps you to get some more testers and keep development going http://www.fuzemobility.com/shake2send-bump-like-app-for-windows-mobile/
bugsykoosh said:
Neat app. Hope this helps you to get some more testers and keep development going http://www.fuzemobility.com/shake2send-bump-like-app-for-windows-mobile/
Click to expand...
Click to collapse
Thanks for the mention! As for that bug you mentioned, I'll check it out.
very cool
downloaded the .cab. only problem- none of my friends have have smartphones. so when i get to test i will let you know. watched your video though- very cool.
thanks for your hard work.
I am guessing both the device has to be on the same WiFi .. is that true ?
UPDATE : Guess not, if using the public server
Another Question : How will the app handle if there are 2 different people with the same name using the public server @ the same time ?
Great stuff none the less have given it some press on 1800PocketPC
the0ne said:
I am guessing both the device has to be on the same WiFi .. is that true ?
UPDATE : Guess not, if using the public server
Another Question : How will the app handle if there are 2 different people with the same name using the public server @ the same time ?
Great stuff none the less have given it some press on 1800PocketPC
Click to expand...
Click to collapse
If you WANT (paranoid I suppose), you can connect to a private server, but otherwise, the public server runs fine.
If there are two people with the same name on the public server at the same time... Hm, I actually think this might cause an issue, because the names are important in identifying devices. I'll have the server make sure no one chooses a taken name and patch it on my end
Thanks for the listing!
Duplicate names should be fixed now!
The server simply changes the internal name of a conflicting client and adds a _1 to it.
The "Me" label will display the same name (until next build), but when pairing it will include the _1.
All the technical stuff aside, the problem is fixed serverside.
New Version Soon!
Almost done with Photo/file sending, but before I release the new version, I need some more feedback.
You can probably expect it sometime next week
does everyone find this cool app to work easily or are you guys having some issues?? My question is how do you exactly go about using this properly when say you wanna share a contact with someone thats isnt near you and say there at there house and your at yours?? please a little help would be greatly appreciated!!! I'm really excited about this app and the possibilities it posses like sharing photos and files etc!!!!! great work keep it up as im sure with time itll look better an better!!!! WM FOREVER!!
looks great. Cant wait to try this out, as it will make it easier to send contacts/photos/etc back and forth between phones without emailing or MMSing.
Greatly appreciated.
mhrc4 said:
looks great. Cant wait to try this out, as it will make it easier to send contacts/photos/etc back and forth between phones without emailing or MMSing.
Greatly appreciated.
Click to expand...
Click to collapse
so after installing this on 2 phones and testing, here is what I have encountered.
- the application does not save the username/devicename that you give within the application when signing into the server. Would be awesome to have it auto-connect to your server and save the username/device name
- on first try, works exactly as expected
- on second try, when sending a contact from phone 1 to phone 2, if phone 2 IGNORES the contact, and subsequent contact sent from phone 1 to phone 2 comes across as that initial contact that was ignored. (basically, if you send the wrong contact, and phone 2 ignores it, you cannot send any other contacts to that phone, otherwise it comes across as that initial ignored contact
Best of luck, hope this all helps!!
mhrc4 said:
so after installing this on 2 phones and testing, here is what I have encountered.
- the application does not save the username/devicename that you give within the application when signing into the server. Would be awesome to have it auto-connect to your server and save the username/device name
- on first try, works exactly as expected
- on second try, when sending a contact from phone 1 to phone 2, if phone 2 IGNORES the contact, and subsequent contact sent from phone 1 to phone 2 comes across as that initial contact that was ignored. (basically, if you send the wrong contact, and phone 2 ignores it, you cannot send any other contacts to that phone, otherwise it comes across as that initial ignored contact
Best of luck, hope this all helps!!
Click to expand...
Click to collapse
About the device names, I'm thinking about something along that line, as well as allowing users to manually pair with another user, by entering their name (For long distance transfer).
About that contact thing, strange. I'll look into it and hopefully put it in the next release (which will be soon )
Edit: found the problem. What's really happening is, after you send a contact, the dialog is still returning the same contact (Instead of the selected one). So this bug should happen even if you accept the contact, right?
very good, possible a german version ???
ppkoeller said:
very good, possible a german version ???
Click to expand...
Click to collapse
I don't speak German, so I can't translate it (without Google Translate, which would probably translate poorly), but if someone wants to translate for me, I'll be happy to make a build.
If someone's interested, PM me and I'll send you the strings that need translating.
Also, the English app should work overseas, if I'm not mistaken.
0.6 Released! See first thread for download and details.
I can help you to translate, if is possible
Jaxbot said:
0.6 Released! See first thread for download and details.
Click to expand...
Click to collapse
Glad to hear that you released a new version, I've already installed it lol and also that it's got improvements but when you said to be careful about what size cabs to send to each other or it'll crash what size is allowed and in the future will there be a no size limit b/c that would be the right approach KEEP UP THE GREAT WORK AND TY FOR THIS APP!! Question though, so now w/this latest version we can send stuff to other people that are at far distances and it'll work just fine?? And if so do we have to use it with the server on our PC'S to do so or is it easier to do then that if say were not at our houses???
MRFERRARI23 said:
Glad to hear that you released a new version, I've already installed it lol and also that it's got improvements but when you said to be careful about what size cabs to send to each other or it'll crash what size is allowed and in the future will there be a no size limit b/c that would be the right approach KEEP UP THE GREAT WORK AND TY FOR THIS APP!! Question though, so now w/this latest version we can send stuff to other people that are at far distances and it'll work just fine?? And if so do we have to use it with the server on our PC'S to do so or is it easier to do then that if say were not at our houses???
Click to expand...
Click to collapse
About the file size: The current limit is 10mb. I probably won't set it any higher, because when the file limit is 10mb, the application is literally taking up 10mb of RAM, which is a lot for a handheld device.
You will not need the private server, unless you do not want a third party server handling connections (The server does not store anything, not even connection logs), but some people are paranoid, which is fine.
To send far distances, just click Pair->Manual Pair, and enter your friends username. Then have you friend do the same, but for you username. The two devices will pair OTA and allow file/contact sending.
Jaxbot said:
About the file size: The current limit is 10mb. I probably won't set it any higher, because when the file limit is 10mb, the application is literally taking up 10mb of RAM, which is a lot for a handheld device.
You will not need the private server, unless you do not want a third party server handling connections (The server does not store anything, not even connection logs), but some people are paranoid, which is fine.
To send far distances, just click Pair->Manual Pair, and enter your friends username. Then have you friend do the same, but for you username. The two devices will pair OTA and allow file/contact sending.
Click to expand...
Click to collapse
Thank You so much for getting back to me, your awesome lol...and Thank You very much for the info/instructions!!! I've already told many people about this app. and posted about it numerous times on twitter!!!
Is there anything your looking to add to this app in the future feature wise? when will it be finalized as a final version? Also when we enter a user name will it stick or do we have to always re-enter it every time we use the app?
MRFERRARI23 said:
Is there anything your looking to add to this app in the future feature wise? when will it be finalized as a final version? Also when we enter a user name will it stick or do we have to always re-enter it every time we use the app?
Click to expand...
Click to collapse
If people have suggestions, I'll look into adding them, but for now, bug fixes and improvements are the main concern.
The user name you choose is not permenent, which is why it is random each time. It's just a useful identifier, that at one point will probably be 100% automatic and simply tell the user his/her ID.
Hi all,
My work Exchange account enforces security on my SGS2 which requires password protection. Only PIN and password is allowed, I cannot choose swipe gesture (annoying btw, is there a hack for that??).
I have a four-digit PIN set as it is the quickest to enter. It is still a bit irritating however to have to enter it and hit OK every time I check my phone, regardless of whether I locked it 10 seconds ago or 10 hours ago.
On my iPhone I could set the autolock not to engage until after 20 minutes of no interaction. I haven't found this setting on my SGS2 but I'd really like to have it.
Is there a way to accomplish this?
Thanks for all help!
Me too!
Exactly the same here. Annoyingly, some colleagues using IPhones also sync with exchange and don't appear to have the same problem with enforced security.
I'd love to hear the responses to this thread, but in the meantime, this is all I have to offer:
Talk to your sysadmin and see if the permissions can be changed at the exchange-end
You can occasionally "switch off" exchange security in Settings - maybe in your "off-peak" times. Don't have the phone to hand, but in Settings - Security - Device administrators, delete exchange and then set your swipe security. Exchange will then stop working and will nag you with security messages when you try to access it. When you want it back, just click on the notification and rekey your PIN - exchange will "own" your phone again.
Seriously, whoever thought this was a sensible implementation of security must be an Android-hater.
arabbitte said:
Exactly the same here. Annoyingly, some colleagues using IPhones also sync with exchange and don't appear to have the same problem with enforced security.
I'd love to hear the responses to this thread, but in the meantime, this is all I have to offer:
Talk to your sysadmin and see if the permissions can be changed at the exchange-end
You can occasionally "switch off" exchange security in Settings - maybe in your "off-peak" times. Don't have the phone to hand, but in Settings - Security - Device administrators, delete exchange and then set your swipe security. Exchange will then stop working and will nag you with security messages when you try to access it. When you want it back, just click on the notification and rekey your PIN - exchange will "own" your phone again.
Seriously, whoever thought this was a sensible implementation of security must be an Android-hater.
Click to expand...
Click to collapse
For the second option, phone will take time to decrypt and encrypt which is even more annoying if the storage is almost full. I don't know whether its the encryption/decryption or something else that spoilt my Micro SD card but strangely it got corrupted after a bit of tinkering like this and firmware change.
See if Moxier mail app (trial version) as it encrypts within the app than at a device level. If it works, worth spending money later if it works. Touchdown or other mail apps haven't worked for me so can't really comment about them. I guess they also have encryption at an app level that will address exchange server security policies. Give it a try. See what happens!
not sure if this is what yer looking for but "juice defender" has an option to set different time out lengths for screen off and screen lock, it also an extra option to set the lock to never come on when in range of home wifi etc.
i use juice defender ultimate not sure if the "lesser" versions have this feature.
@hari: I read somewhere that Touchdown does a similar thing, enforcing things on a application level. Actually, I think it was on the touchdown website (which seemed a little odd that they'd avertise it)..
How does Moxier Mail go with integration? I.e. is the sync'd schedule available to other applications?
Thanks for the tips guys.
I do not really like the idea of completely disabling my work Exchange sync, I am dependent on it.
Furthermore, I don't think Moxier will do it for me as I need fully integrated calendar sync as well.
Juice Defender might do it for me actually if it lets me delay the lock engagement. I'll try it out and post back.
Doesn't look like JuiceDefender is able to override the PIN lock timeout enforced by Exchange security, unfortunately.
Aaahh, I'd kill to have that lock time out/wifi dependent lock functionality JD offers!
Stupid Exchange security..
Kaibosh said:
@hari: I read somewhere that Touchdown does a similar thing, enforcing things on a application level. Actually, I think it was on the touchdown website (which seemed a little odd that they'd avertise it)..
How does Moxier Mail go with integration? I.e. is the sync'd schedule available to other applications?
Click to expand...
Click to collapse
Not exactly sure what you mean by "sync'd schedule available to other applications?". If I understood correctly, Moxier has calendar, contacts and tasks sync. And it appears in "Accounts and Sync" option like other synced accounts like Gmail etc. with a flexibility to chose push/pull as per time of the day.
Only downside with all these apps is (one can live with this limitation though!), they have their own inbox, calendar within the app (instead of unified inbox, calendar etc..). Anyway, as such we're used to Gmail within its own app.
CrackaBoi said:
Doesn't look like JuiceDefender is able to override the PIN lock timeout enforced by Exchange security, unfortunately.
Aaahh, I'd kill to have that lock time out/wifi dependent lock functionality JD offers!
Stupid Exchange security..
Click to expand...
Click to collapse
Did you talk to your exchange admins? This might be the easiest option.
On the subject of my 2nd suggestion: Yes, it's a kludge but it really doesn't take much to switch it on/off. I didn't have any problems as discussed above with encryption/decryption and/or filling storage; it just worked. And switching it off and on in the manner I described doesn't cause a delay.
But the best option is to talk to your admins. Show them this Dilbert if they offer resistance:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
arabbitte said:
Did you talk to your exchange admins? This might be the easiest option.
On the subject of my 2nd suggestion: Yes, it's a kludge but it really doesn't take much to switch it on/off. I didn't have any problems as discussed above with encryption/decryption and/or filling storage; it just worked. And switching it off and on in the manner I described doesn't cause a delay.
But the best option is to talk to your admins. Show them this Dilbert if they offer resistance:
Click to expand...
Click to collapse
Hahaha, fantastic.
Unfortunately, talking to mu Exchange admin isn't really an option. I work for a very large consulting firm.
CrackaBoi said:
Hahaha, fantastic.
Unfortunately, talking to mu Exchange admin isn't really an option. I work for a very large consulting firm.
Click to expand...
Click to collapse
Same here..
Somewhere I also read, you can patch up your email application on the phone to disable the security..
For me thats not an viable option. I have to use Lotus Connect, which install its own version of mail application.
My Desire HD had an option of delaying the password lock based on the inactivity.
So I guess its somewhere there..
Athar Mansoor said:
Same here..
Somewhere I also read, you can patch up your email application on the phone to disable the security..
For me thats not an viable option. I have to use Lotus Connect, which install its own version of mail application.
My Desire HD had an option of delaying the password lock based on the inactivity.
So I guess its somewhere there..
Click to expand...
Click to collapse
Interesting.. What do you mean "patch up"? I use the standard emial client..
CrackaBoi said:
Interesting.. What do you mean "patch up"? I use the standard emial client..
Click to expand...
Click to collapse
look up this one
http://forum.xda-developers.com/showthread.php?t=1117452
Why don't we ever hear of such usability issues in the many glowing reviews that are out there? I'm not winging, but its such a PITA to have to constantly reenter a 4-digit PIN that is directly impacts on your ability to use the phone. What about driving for example? You can't get past this screen to make a call, even with a bluetooth handsfree kit.
Not clever Android. What we need (in the absence of admins who are not BOFH) is exactly what is suggested in the thread title. BTW, When I mentioned above that IOS doesn't have the problem I think that's not quite true - the difference is that it splits the 2 functions: Screen Off & "logged out". I understand you can configure the 2 values seperately.
Now if my phone had that and would stop rebooting when it felt like it, it would be perfect!
arabbitte said:
Why don't we ever hear of such usability issues in the many glowing reviews that are out there? I'm not winging, but its such a PITA to have to constantly reenter a 4-digit PIN that is directly impacts on your ability to use the phone. What about driving for example? You can't get past this screen to make a call, even with a bluetooth handsfree kit.
Not clever Android. What we need (in the absence of admins who are not BOFH) is exactly what is suggested in the thread title. BTW, When I mentioned above that IOS doesn't have the problem I think that's not quite true - the difference is that it splits the 2 functions: Screen Off & "logged out". I understand you can configure the 2 values seperately.
Now if my phone had that and would stop rebooting when it felt like it, it would be perfect!
Click to expand...
Click to collapse
I hear you bro.. Feel like tricked into buying the phone lol?
Athar Mansoor said:
I hear you bro.. Feel like tricked into buying the phone lol?
Click to expand...
Click to collapse
I don't want to start an <ANYTHING> Vs Android argument but my 4 year old HC TYTN II did the "boring"* stuff better than my SGGS2:
Office document editing - has anybody looked at Excel in Polaris? A fag-box and a blunt pencil could offer a stiff challenge.
Access to exchange data (as above)
Handsfree support for making phone calls. I'm talking voice recognition, phone security and bluetooth here.
I'm not ranting - I knew what I was doing when I bought the phone and, yes, I much prefer it to my prehistoric WM device. Having said that, I'd just wish it was a little better at some of the boring stuff above. Yes, 1080p video recording, Dual-core HD games, etc, etc are wonderfull, but probably wasted on me!
* As in business activities.
Bumping for support - have tried numerous ROMs with no luck (Lighting, Cognition, Darky 2.0 and Oxygen), I to am forced by my company to have a 6 Digit Pin Code and gets quite frustrating.
elite_gamer04 said:
Bumping for support - have tried numerous ROMs with no luck (Lighting, Cognition, Darky 2.0 and Oxygen), I to am forced by my company to have a 6 Digit Pin Code and gets quite frustrating.
Click to expand...
Click to collapse
replying on account of the bump
same phone same problem...so i did a little search and found an app called delayedlock. it is awesome...i usually dont buy apps but this is one thing my mobile cant be used without...try it it will give you what you are looking for by delaying the lock
<a click on thanks is most welcome>
capaxdoli said:
replying on account of the bump
same phone same problem...so i did a little search and found an app called delayedlock. it is awesome...i usually dont buy apps but this is one thing my mobile cant be used without...try it it will give you what you are looking for by delaying the lock
<a click on thanks is most welcome>
Click to expand...
Click to collapse
On the market page it says "DOES NOT WORK IF EXCHANGE REQUIRES A PIN!".
The Exchange-enforced security is exactly what I wanted to circumvent in the first place.
@elite_gamer04
I use the hack from this thread on my SGS2 with Litening ROM 6.1, and it works perfectly, I've used it for months.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread is for a custom ROM for the FAVI Smartstick.
DISCLAIMER
I am not responsible for bricked devices, dead SD cards,
Please do some research of your own, if you have any concerns about features included in this ROM before flashing it!
YOU are choosing to make these modifications, and do know that I am not asking you to make the decision to flash this ROM.
If you choose to flash this ROM, do so but that's entirely your decision.
Click to expand...
Click to collapse
Having said that, I am here to help and will do my best to help you if you run into trouble. All I ask is, in case of problems, kindly post as many details on the problem as you can. This will help me narrow down the problem.
About JASS -
Just Another SS Rom is my own customized rom. It uses the same ICS 4.0.4 codebase as the stock. Due to the ingrained AMLOGIC's Library, I am reluctant to modify the Kernel significantly. Rest of the Rom however has been worked on considerably. It has been oriented towards gaining maximum performance out of the single Processor on board. It also unlocks the true potential of the Mali GPU.
We all would love to see Jellybean on the Favi Smartstick. But such is not the case. The blame squarely lies at the doorstep of Amlogic the maker of the A9 processor inside. Until such time they release source for Jellybean, we will have to wait. Just so you are aware, you are not alone. The whole community of Ainol NOVO Tablet, which is based on same Processor, rebelled at this. Given they are considerably larger than the one for this stick, they had pressured Ainol into releasing JB. Ainol pointed to AMLOGIC so a petition has already been created to Amlogic. If they succeed, we shall benefit.
So is all lost till then ? Oh not at all!! Why would you want JB ? I guess for Project Butter? Or perhaps Google Now ? If so read on the Change Log.
Release 2.0 Change Log -
Say Hello to Google Now!
Welcome Project Butter! Google's Grass Roots effort geared towards smoothness and Performance. Watch this video for more.
Introducing Themed Google Apps, Say Thanks for Team Blackout for the amazing Inverted Google Apps.
Welcome the Xposed Framework. This opens the door wide for all kinds of mods tweaks and other goodies!
Gamer Oriented Performance. Quicker Disk I/O. Other Non-Gaming users should experience grass Roots performance improvement.
I am not a Graphics artist. But I have dabbled a little bit on theaming the Rom. Let me know your thoughts.
Zoom partly works. The Lens button on the lower right corner of the Mini Wireless keyboard will zoom out of any scenario. Afraid I don't have a zoom in yet.
Side note to introduction of Black GApps, From this release on, the Google apps are separately flashable zip. I will include only Google Play and Calendar in the Rom. Rest you can flash separately. You will notice a Team Black Updater app included.
This release is powered by SuperSU. So do please stop by and say thanks to its developer @Chainfire.
Please use Titanium Backup or any Root Uninstaller to remove the "Update 1.0" app. It does not play well with my code and keeps nagging about an update.
Release 1.0 Features -
Here are some of the Salient features of this Rom
Tablet UI instead of stock tabbed UI.
Numerous performance tweaks. Better memory management.
Better Wi Fi connection speed. In my case the recorded speed over WiFi jumped from 4 to 5 MBPS to 9.5 MBPS.
Better Streaming buffer. So less likelihood of Buffering while watching online video.
Dolby Digital Surround Sound with Beats Audio from this thread. Only applicable if your source file is Dolby or Netflix/hulu streams Dolby. If you like this, please thank nikhilonlive.
Adaway is included and programmed out of box. So even if you don't use the app, ads will be limited.
CIFs Manager is included in case you need to map to some windows share or a NAS.
Download & Installation -
This release will reset your SmartStick to Factory Default and remove all existing apps. So better take a Titanium Backup if you wish to conserve.
NOTE - AMLOGIC has updated Recovery. So there will be Verification failure errors if you don't follow the instructions carefully.
There are two separate sets of instructions depending on your Current firmware on the Smartstick.
Look under Settings > About > Build.
Firmware Version 1.1.2.1 & JASS 1.0 -
If you see 1.1.2.1 as the Stock firmware, then you need to download the Full Flash firmware of Smartstick.
If you have previous version of JASS Rom, you still need to update your Recovery.
Download Link here.
Unzip the contents of the downloaded Zip file completely to the Root of your Micro SD Card or a USB Flash Drive. You will notice another zip file called update.zip. Please do not unzip it. Make sure it resides on the Root of your microsd card or USB Drive then proceed to installation.
Firmware Version 1.1.2.5 -
Your Recovery is already updated. You can go ahead and use only the Update version. Download Link here.
Do not Unzip the downloaded file. Place it on the Root of your MicroSD Card or USB Flash Drive and then proceed to installation.
Google Apps -
These are completely optional. I have included essential apps into the Rom. These are the Play Store and the Calendar.
Irrespective of either case, you can use same Google Apps zip. Download Link here. Place the Zip file
Installation -
Plug in the above flash ROM device to the MicroSD slot or USB port.
Reboot into Recovery by either using Quick Boot App or by using a push pin.
Choose apply update from the SD Card or USB Stick.
For those who are coming from 1.1.2.1 version, you may see automatic update process without your input. If so, then let it complete.
For everyone else, first choose the Rom Zip. Either the update.zip or the separately downloaded JASSROMv2.0 off 1.1.2.5 zip.
Once the Rom has been flashed, you will be come back to the Recovery Screen. Now optionally choose the Gapps zip file. Proceed to flash
Reboot & Profit !!
NOTE -
Welcome Wizard does not include Logging into your Google Account. So you will have to choose Google Play Store so it will prompt you to log on the first time.
First time Boot will take considerable time as Dalvik Builds for the first time. Subsequent boots will be faster.
That's it! Enjoy & have fun. Let me know if you have any issues or feedback.
Prior Release Download -
Download Link
Correct XBMC Build for Smartstick -
If your XBMC Setup is working perfectly, do not read further.
The Official Release you see on XBMC's website is compiled for Allwinner ARM Processor based devices. Our Smartstick DOES NOT HAVE that processor. That is the primary reason of some of the issues you may be facing.
Here's a short detail on one of the reason for the problems.
The Smartstick, either the 8 GB or 16 GB is powered by AMLOGIC Cortex-A9 Processor. Now the part that typically throws people off is the ARM part. Both Allwinner Technologies as well as AMLOGIC manufacture Mobile Processor that are based on ARM Architecture. Smartstick has AMLOGIC's implementation of ARM Cortex A9. The version of XBMC you can download as of 01-10-14 is for Allwinner ARM Cortex A12.
So you need to get a build of XBMC that has the AMPLYER built for the AMLOGIC's implementation of the ARM Architecture. The PIVOS XIOS device does have the same processor as the Smartstick. So XBMC build by users of PIVOS will be suited for you. You can visit their forum for the latest builds. Here's a build that has been tested and found successful. So go ahead and give this a try. It has the AMPLAYER compiled inside. As you are aware, you are welcome to use an external player as well.
Thanks for this! Been waiting for a custom rom
Sent from my Evo 3D CDMA using xda app-developers app
Two features
Droid VNC ! Please. I can get a view-only VNC connection to work. But I always get "Cannot create virtual input device".
I am running the 1.1.2.1 rooted build from SmartStick.info
And Google TV remote works, but most of the buttons do not work obviously. What I really need from it is a button to open the onscreen keyboard and also, to be able to type Caps (I cannot currently). App shortcuts would be nice too.
Let me know if this could be done. Thanks.
Joeviocoe said:
Two features
Droid VNC ! Please. I can get a view-only VNC connection to work. But I always get "Cannot create virtual input device".
I am running the 1.1.2.1 rooted build from SmartStick.info
And Google TV remote works, but most of the buttons do not work obviously. What I really need from it is a button to open the onscreen keyboard and also, to be able to type Caps (I cannot currently). App shortcuts would be nice too.
Let me know if this could be done. Thanks.
Click to expand...
Click to collapse
As far as VNC is concerned, the IP tables are turned off partially. So making VNC or VPN work is bit of a challenge. I will see what I can do.
Google Remote's been buggy a bit. Primary reason is the TV Remote app and hardware don't integrate well. (AMLogic Kernel). I will need to include some keyboard drivers. Again will see what I can do.
Would you be kind and test out the current build ? I'd love to know first impressions...
Thanks for requests. Gives me an idea of what the users are looking for,
Yes, I would be happy to test what you've got so far
In every attempt to either get VNC user input working... or to install any functional remote... I always seem to have similar errors which I understand to be a lack of "uinput module loaded in the kernel"
Joeviocoe said:
In every attempt to either get VNC user input working... or to install any functional remote... I always seem to have similar errors which I understand to be a lack of "uinput module loaded in the kernel"
Click to expand...
Click to collapse
Do please understand I did not modify the Kernel from Stock version 1.1.2.1. So these are carry forward issues from there.
I am presently working on fixing loading external modules at start. This is work in progress as listed in the Op.
Even the 1.1.2.1 stock and rooted versions don't work well with the Google TV keyboard.
It is most apparent when starting up xbmc.
I think that would be a great feature to work on.
Sent from my SCH-I535 using xda app-developers app
fritzboyle said:
Even the 1.1.2.1 stock and rooted versions don't work well with the Google TV keyboard.
It is most apparent when starting up xbmc.
I think that would be a great feature to work on.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
There are .Ko files missing in the current rom for Google Keyboard. I will have to procure the ICS compatible version in order to support. Will definitely go after it.
Thanks for the feedback.
Will you be kind enough to test how Wireless connectivity is working out ? Especially buffering when playing online content ?
So how has this rom been working? Just bought a Favi stick off of groupon and will wanna root as soon as I get it. Big thing for me will be adaway. Plan on using TSF Shell Launcher with it. Pretty excited.
Sent from my SPH-L720 using xda premium
TheClsr420 said:
So how has this rom been working? Just bought a Favi stick off of groupon and will wanna root as soon as I get it. Big thing for me will be adaway. Plan on using TSF Shell Launcher with it. Pretty excited.
Click to expand...
Click to collapse
This rom is Rooted. So if you flash this, you don't need to separately root. AD-Away is included in the ROM..
I'm just gonna say thank you in advance!! 1 more question for you, how is the streaming over wifi?
Sent from my SPH-L720 using xda premium
TheClsr420 said:
I'm just gonna say thank you in advance!! 1 more question for you, how is the streaming over wifi?
Click to expand...
Click to collapse
What if I say try it and find out ? (Amazed maybe ? :laugh
I have particularly coded for better Wi-Fi Performance. :silly:
Looking forward to it! Now let's just see how long it takes groupon to send it to me! But last question, any chance of jellybean? If not I'm totally fine with ICS and a launcher.
Sent from my SPH-L720 using xda premium
TheClsr420 said:
Looking forward to it! Now let's just see how long it takes groupon to send it to me! But last question, any chance of jellybean? If not I'm totally fine with ICS and a launcher.
Click to expand...
Click to collapse
Short answer. No JB right now. Besides some of the JB features require real touch screen. So not really a difference between ICS & JB.
Now that 1.1.2.5 RC is out, will you be integrating the update in this rom?
fritzboyle said:
Now that 1.1.2.5 RC is out, will you be integrating the update in this rom?
Click to expand...
Click to collapse
Yes that's on cards. Especially considering the Navbar is back, I am considering skinning it and/or porting some tablet themes as well.
However, as you see, It doesn't look like Popularity peak. I had a grand total of 17 Downloads total. Given that I didn't have even as many posts here or on Favi's Forums, it doesn't seem like people even want this.
Perseus71 said:
Yes that's on cards. Especially considering the Navbar is back, I am considering skinning it and/or porting some tablet themes as well.
However, as you see, It doesn't look like Popularity peak. I had a grand total of 17 Downloads total. Given that I didn't have even as many posts here or on Favi's Forums, it doesn't seem like people even want this.
Click to expand...
Click to collapse
I totally understand. I guess you would only work on it for your own interest (but you can count on me to be a beta tester)
Sent from my SCH-I535 using xda app-developers app
fritzboyle said:
I totally understand. I guess you would only work on it for your own interest (but you can count on me to be a beta tester)
Click to expand...
Click to collapse
Its not that I'd do it for my own interest. I do it for "People's" Interest. This does not seem to be present. Does make one loose interest in the work. I am not saying I will stop doing it, I am just saying what I feel.
Thanks for the offer. I will certainly reach out.
Count me in.
I think the brand favi is not popular yet and uet does noy have enought developers
If you can improve it memory and update
To latest version and if it can do all the nice things like
Xbmc
Maybe preload xbmc ? Hardware player ..etc then people really interest
Hello XDA, I am updating this post to now reflect that this thread is a development thread versus a general thread.
What is OpenFit?
OpenFit is aimed to be an open source alternative to the Gear Fit Manager (which cannot be run natively on non-samsung devices), with hopes that it will provide most/all of the features provided by the Gear Fit Manager app and possibly even more. That being said, this application is in early development and lacks a lot of features.
What can it do?
Connect to the Gear Fit
Auto Connect
Sync time with the Gear Fit
Toggle 12-Hour/24-Hour clock
Media Controller
Alarm notifications (stock android clock app, cannot dismiss alarm from Gear Fit)
SMS notifications
MMS notifications (does not show mms content)
Weather notifications (currently only english support)
Weather clock style
Phone calls notifications
Reject phone calls (quick reply doesnt work yet)
Find device
Email notifications (does not grab the contents of email, that data is protected)
3rd party apps notifications
Pedometer data
Google Fit Sync
This app was developed using firmware: R350XXU0BOA2
Download from Google Play: Open Fit
How to install:
Download from google play
Run OpenFit application
How to upgrade/downgrade firmware:
Tutorial provided by user: @LilLowEK
Tutorial here
How to debug:
Install and Open CatLog app (Free on google play)
Press Menu key on you phone to bring up the record button
Press record and when prompted for file name, add filter with text 'OpenFit'
Press okay, it will begin to record logs for OpenFit.
Perform the action you are trying to debug (try doing it a few times, this helps me figure out the cause of bug)
When completed, stop the recording by tapping on the CatLog notification.
Email or pm me the logs so I can try fixing the bug
Github: https://github.com/jareddlc/OpenFit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How did I make OpenFit
The first thing i decided to do, was to try to research on how the phone and watch communicated. For this I enabled Bluetooth HCI snoop log in the developer options in the CM rom. This would log all traffic from bluetooth. I factory reset my watch and then connected it with the Gear Fit Manager app. I sent/received a test messages, using custom apps and text messages. I then stopped logging bluetooth traffic, and began inspecting the logs using wireshark. For each new connection after a factory reset of the watch, the Gear Fit Manager checks to see if a Firmware update is available and then sends most of the data to the watch; updated texts, images, predefined text etc. Then shortly after I began seeing the logs for the text messages and custom messages. For text messages, nothing was needed, but for custom messages, the app will send to the watch the image of the app along with some metadata, such that the watch can now receive the custom type message (think facebook messenger). So now that I had a nice data set to work with I tried connecting to the watch using androids BLE connections, but I could not connect successfully with it, and so I tried using the BT RFcomm and that worked (I can try to revisit BLE, now that I have more knowledge). Now that I can connect, I tried sending messages (messages from the BT snoop log), however I didnt have any success with this. I realized on each connection, the watch will require a message as a handshake and to my surprise the message was "ODIN" (Samsung's software to flash firmware). After I sent the "ODIN" message, that watch now acknowledge OpenFit and would accept incoming messages. Shortly after I was able to figure out the protocol for sending messages to the watch specifically, setting time and sending a general message. For each type of message, the packet that is sent is different, which is why it time consuming to figure out how to send a particular message. This is where I currently am in the development, I was only able to get this far by using the BT snoop log in conjunction with a decompiled Gear Fit Manager app which I used as a reference. If you have any specific questions feel free to ask.
Hi!
The idea is good, but with this thread:
http://forum.xda-developers.com/gear-fit/general/diy-gear-fit-samsung-devices-lollipop-t3004234
I've been able to make it work on my Nexus 5 on Lollipop.
Maybe the real need is a open community that work on official gear fit manager and patch it, or develop a script to auto patch the last release of the apk!
I think that a open source project is a good idea. The original gear fit manager has too many problems and limitations (with non Samsung device).
garsim said:
I think that a open source project is a good idea. The original gear fit manager has too many problems and limitations (with non Samsung device).
Click to expand...
Click to collapse
yes ! i think like this .... make a new app for managing and make connection to non samsung devices please .... think this is a good way ....
hope for the release soon
will follow the thread !!!
This is not a development thread yet, so it's good to keep it here to get some attention.
Once you start to develop something, you should post it in the development section, otherwise it'll be overrun by "general" posts and threads.
Good initiative though!
I would use it, especially if alarms could work. I bought it knowing its limitations with non samsung devices, but nothing has happened so I'm not using the thing as much as I could
Thanks, @NeoS I'll only post in Dev if I can get a connection with the gear working.
Get fitness sensors data from GF
It would be great to have data extracted from the device. For example it would be a good idea to import data into Google Fit application or just store it to an Excel file.
So I vote "yes" for this reverse engineering project. :good:
MagXDA said:
It would be great to have data extracted from the device. For example it would be a good idea to import data into Google Fit application or just store it to an Excel file.
So I vote "yes" for this reverse engineering project. :good:
Click to expand...
Click to collapse
:good:It would be definitely good for the non-samsung users like me. Hope we can get GT to work with other fitness app as well.
i would to try this app but i need an apk to install it on my device
would love an open source app!!!
Very good idea, I would like to test your .APK in the future.
I would love to see this happen, getting this to do more and open it up and getting more out of it that samsung never planned would be awesome!!:good:
Sorry guys, I'll try to resume working on this.
Hey guys, thanks for all the positive feedback. sorry I havent worked on the app for a long time, I stopped at when trying to learn how to connect to the device, and then got very busy as I am working on multiple projects and work. I'll try to figure out how to connect to the device via this app. I'll also try to update to the latest firmware to see if anything has changed or become easier. I would be more than willing to accept anyone who would like to help out. :good:
I am also using strava app alot, and google fit, and would love to see if i can get metrics from the device and use it to sync with google fit
Galaxy Tab tester
This is a great idea!
I would love to sync my Gear Fit with my Galaxy Tab 4 using an app that works. Gear Fit pairs with the Tab, but the data won't sync, even though Samsung apparently included the Tab as a compatible device...
I've had limited success with the EndoMondo app, but EndoMondo doesn't seem to pull any data from Gear Fit's native software. I also saw a Youtube video that mentioned the 'Lose It' app worked with Gear Fit, but I did not have any success there either...
Looking forward to seeing where this goes.
Cheers,
jareddlc said:
Hey guys, thanks for all the positive feedback. sorry I havent worked on the app for a long time, I stopped at when trying to learn how to connect to the device, and then got very busy as I am working on multiple projects and work. I'll try to figure out how to connect to the device via this app. I'll also try to update to the latest firmware to see if anything has changed or become easier. I would be more than willing to accept anyone who would like to help out. :good:
I am also using strava app alot, and google fit, and would love to see if i can get metrics from the device and use it to sync with google fit
Click to expand...
Click to collapse
I'd like to help in anyway I can. I use a Nexus 5 and a Gear Fit. and have access to a Stock Galaxy S3. Unfortunately I don't know Java, but I do know some C++, and QML. Are you only planning on re-implementing the Gear Fit Manager? Or are you thinking about maybe working on more the fitness features side? Or both? PM me if you want to work together on this, I'm generally pretty good at figuring things out. I remember I looked into the Fitness with Gear side more than the Gear Fit Manager Side, rather than the Gear Fit Manager side. It might be interesting to look at libpebble, since Hexxeh basically did what we need to do except for a different device. I think it'd be nice to try to write an app in such a way it's easily portable to other platforms. (I personally really like sailfish...)
Unfortunately I also work, and am generally pretty tired by the end of the day.
Thanks, Core2idiot
thanks @Core2idiot, I left off on actually trying to make a connection with the device. Like you said, Its hard getting started once you've gotten stuck. But i'll try my best to get back on it
Sorry
jareddlc said:
thanks @Core2idiot, I left off on actually trying to make a connection with the device. Like you said, Its hard getting started once you've gotten stuck. But i'll try my best to get back on it
Click to expand...
Click to collapse
Sorry I'm new... but just to be sure... is possible use Aerlink: Wear Connect for iOS on Gear Fit with any pc program. Or use Ble Utility for connect it on iPhone? Because when I try the App always disconnects.
@becket As far as my testings, you cannot connect to the Gear Fit, using any of the tools on the market such as BLE testers. I think I am "near" getting the connection paired. When you first connect your device, is shows your a security pin, both on phone and on watch. I am what I think close to figuring out how to do that. I have a bunch of decompiled files Im looking trough so its not fun. But hopefully I can figure it out.
I think I successfully connected(paired) with the device. I was trying to do it with Bluetooth low energy, but turns out, The first time needs to be done with the old Bluetooth protocol! I have yet to still find out how to convince the gear fit that i am gear fit manager so it can begin operating.
Hi, I really need some advice and help, please!
Someone hacked my galaxy note 8 (latest update of OS) using Bluetooth. Thereafter when I had Bluetooth turned off all the time I would sometimes found it had turned on again and at times a pic would randomly appear in my camera roll folder. I was targeted by a group of people and having recalled looking back I was encouraged to message through WhatsApp and I believe that chrome and Andoid webview extension were involved. They also got into my gmail and tried to delete my contacts and wipe my phone and whatsapp history. Aftert this I saw that a Linux device had been attached to my gmail account.
I then went to an iphone and received a whatsapp from someone and a pic appeared again in my camera roll. I believe they were trying to do the same again and not sure how effective it is on iOS.
But now I have a new galaxy note 8 and someone has sent me a pic and video. I don't know that they are involved and I think I'm being overly cautious, but I need to understand what they did before and what I can do to check if they have hacked my new phone and doing the same thing again, and what I can do now to ensure they don't do it. I'm worried now that if they have got into my new phone and WhatsApp, will they have been able to get my IMEI and is my new phone now permanently susceptible to attack?
If I wipe my phone back to factory settings and reinstall everything again and start a new whatsapp with a new number, will that work?
My MS surface has also been acting up and I'd like to know if there's an easy sign to check on there too.
Thanks so much in advance!
phoenix79802 said:
Hi, I really need some advice and help, please!
Someone hacked my galaxy note 8 (latest update of OS) using Bluetooth. Thereafter when I had Bluetooth turned off all the time I would sometimes found it had turned on again and at times a pic would randomly appear in my camera roll folder. I was targeted by a group of people and having recalled looking back I was encouraged to message through WhatsApp and I believe that chrome and Andoid webview extension were involved. They also got into my gmail and tried to delete my contacts and wipe my phone and whatsapp history. Aftert this I saw that a Linux device had been attached to my gmail account.
I then went to an iphone and received a whatsapp from someone and a pic appeared again in my camera roll. I believe they were trying to do the same again and not sure how effective it is on iOS.
But now I have a new galaxy note 8 and someone has sent me a pic and video. I don't know that they are involved and I think I'm being overly cautious, but I need to understand what they did before and what I can do to check if they have hacked my new phone and doing the same thing again, and what I can do now to ensure they don't do it. I'm worried now that if they have got into my new phone and WhatsApp, will they have been able to get my IMEI and is my new phone now permanently susceptible to attack?
If I wipe my phone back to factory settings and reinstall everything again and start a new whatsapp with a new number, will that work?
My MS surface has also been acting up and I'd like to know if there's an easy sign to check on there too.
Thanks so much in advance!
Click to expand...
Click to collapse
I do strongly advice you to do a full factory reset or go to the nearest technician if you don't know how to do it, to flash the phone from scratch inmediatly. Also try the best security app for android once you setup your device again. That's enough.
Enviado desde mi SM-G550T1 mediante Tapatalk
---------- Post added at 12:58 PM ---------- Previous post was at 12:52 PM ----------
I would also report the issue to the tech support of WhatsApp, if there's any. Also, change every passwords on your Google devices with more secure passwords, Google, banking, social. And do place a secure password to block your device. Good luck.
Enviado desde mi SM-G550T1 mediante Tapatalk
This is why I dislike Touchwiz, it's so outdated and vulnerable.
Just reflash your whole system, you can find guides on YouTube on how to flash a new firmware.
I would also recommend changing to a custom ROM with up to date security patches.
Edit: You should also change all your passwords to something very difficult like 'nJfi8t%Nc178c'
If you have difficulties remembering there's a lot of apps out there that can help, I personally use last pass, you should check it out.
davidzam said:
I would also report the issue to the tech support of WhatsApp, if there's any. Also, change every passwords on your Google devices with more secure passwords, Google, banking, social. And do place a secure password to block your device. Good luck.
Click to expand...
Click to collapse
If you were conned into downloading a webextension then this has nothing to do with whatsapp it has to do with the user. Conntact google security to change your account. In general if they hacked a phone the phone only is the problem but if they have access to all your info then it can always be a problem. About bluetooth always have at least a code between the devices (some BT keyboards do not even have this). Also look at the security update on the device if it is not the latest then swith to one of the custom roms here which are always secure.
As for passwords think of a sentence and use the first letters of each word incorperate numbers capital letters and a symbol this helps you to remember it.
For example
I Have A Dog Who Name Is Henry And I Love Him=IHADWNIHAILH
now change A for the & symbol one I for 1 and A for 4=1H4DWNIH&ILH
mix it up with some upper case and lower case (names)=1h4dwniH&Ilh
you can now add in other symbols or spell words such as [email protected] (too big so we will use only part @m )add ! after Henry and [] around &Ilh [email protected]![&ILH]
now you have a random easy to remember password. This password is the basis for all the security on android (at the current time) so even if you use a code it still unlocks with this and encrypts.
Applied Protocol said:
If you were conned into downloading a webextension then this has nothing to do with whatsapp it has to do with the user. Conntact google security to change your account. In general if they hacked a phone the phone only is the problem but if they have access to all your info then it can always be a problem. About bluetooth always have at least a code between the devices (some BT keyboards do not even have this). Also look at the security update on the device if it is not the latest then swith to one of the custom roms here which are always secure. As for passwords think of a sentence and use the first letters of each word incorperate numbers capital letters and a symbol this helps you to remember it. For example I Have A Dog Who Name Is Henry And I Love Him=IHADWNIHAILH now change A for the & symbol one I for 1 and A for 4=1H4DWNIH&ILH mix it up with some upper case and lower case (names)=1h4dwniH&Ilh you can now add in other symbols or spell words such as [email protected] (too big so we will use only part @m )add ! after Henry and [] around &Ilh [email protected]![&ILH] now you have a random easy to remember password.
Click to expand...
Click to collapse
Thanks for clarifying that fact for me.
Thanks so much! Would a custom firmware allow me to keep the use of knox? I'm thinking to flash it back to factory and only install and use everything from within knox.
Zep0th said:
This is why I dislike Touchwiz, it's so outdated and vulnerable.
Just reflash your whole system, you can find guides on YouTube on how to flash a new firmware.
I would also recommend changing to a custom ROM with up to date security patches.
Edit: You should also change all your passwords to something very difficult like 'nJfi8t%Nc178c'
If you have difficulties remembering there's a lot of apps out there that can help, I personally use last pass, you should check it out.
Click to expand...
Click to collapse
Applied Protocol said:
If you were conned into downloading a webextension then this has nothing to do with whatsapp it has to do with the user. Conntact google security to change your account. In general if they hacked a phone the phone only is the problem but if they have access to all your info then it can always be a problem. About bluetooth always have at least a code between the devices (some BT keyboards do not even have this). Also look at the security update on the device if it is not the latest then swith to one of the custom roms here which are always secure. As for passwords think of a sentence and use the first letters of each word incorperate numbers capital letters and a symbol this helps you to remember it. For example I Have A Dog Who Name Is Henry And I Love Him=IHADWNIHAILH now change A for the & symbol one I for 1 and A for 4=1H4DWNIH&ILH mix it up with some upper case and lower case (names)=1h4dwniH&Ilh you can now add in other symbols or spell words such as [email protected] (too big so we will use only part @m )add ! after Henry and [] around &Ilh [email protected]![&ILH] now you have a random easy to remember password.
Click to expand...
Click to collapse
Just another question regarding Knox Secure Folder.
If I were to install and run everything through the secure folder and I were to be compromised again through a web extension, would that then all hackers to view everything on my phone again regardless of whether it's in the knox environment or outside? Would a backdoor like that work into the secure environment as it did in my normal android system?
Thanks again!
phoenix79802 said:
Just another question regarding Knox Secure Folder.
If I were to install and run everything through the secure folder and I were to be compromised again through a web extension, would that then all hackers to view everything on my phone again regardless of whether it's in the knox environment or outside? Would a backdoor like that work into the secure environment as it did in my normal android system?
Thanks again!
Click to expand...
Click to collapse
If your knox is still working and not tripped then that would be a good idea. However understand that the way to get in and out of knox still relies on encryption methods see CVE-2016-1919 as well as the kernel level security CVE-2016-6584 see also https://googleprojectzero.blogspot.com/2017/02/lifting-hyper-visor-bypassing-samsungs.html, this means that if the key or encryption method is faulty you can get around it and the kernel is more complicated but will also do the same thing. The last way is to access a shared resource such as a clipboard that has access to both places a example of this is CVE-2016-3996. And CVE-2018-9142. Granted most of these are 2017 and 2018 and a quick look at the samsung CVA at https://www.cvedetails.com/vulnerability-list/vendor_id-822/Samsung.html does not have anything for Oreo this can be since until recently only the 9s' had it. But their is a recurring theme that the CVAs' are repeated out of the last 5 4 are repeated and some are simple mistakes (look at Googles project zero above in KALSAR). The question is is this enough and the answer is probably but a security orientated Rom might be a better bet. (I know this is not fair since they do not have CVAs). But a full wipe and fresh install should be enough. Add in a firewall too if you did not have that already.
phoenix79802 said:
Thanks so much! Would a custom firmware allow me to keep the use of knox? I'm thinking to flash it back to factory and only install and use everything from within knox.
Click to expand...
Click to collapse
Sorry for the late reply, but Knox, in my opinion is super vulnerable, new android versions are safe enough.
And no, using a custom ROM would not have Touchwiz integrated nor Knox. Why? Because it will most likely be running stock android vanilla.
More secure than Samsung's Touchwiz, recommend something like LineageOS.
Zep0th said:
Sorry for the late reply, but Knox, in my opinion is super vulnerable, new android versions are safe enough.
And no, using a custom ROM would not have Touchwiz integrated nor Knox. Why? Because it will most likely be running stock android vanilla.
More secure than Samsung's Touchwiz, recommend something like LineageOS.
Click to expand...
Click to collapse
Look this depends on your perspective
FACT: knox is a hardware based security system which is unique to Samsung
FACT: Samsung phones are the most sold
FACT: The maker of the hardware has the resources to secure it better
Therefore Samsung knox is more secure and yes more users using the phone make it more advantageous to crack it. However Samsung to their credit does try to increase security in other ways such as using the TrustZone more and SEAndroid policy strengthening. Lineage is a great choice however knox which will be tripped and ever if not it needs custom software to run AFAIK. Also samsung is DoD approved see DoD list and news article. This is not necessarily a good indication of overall security but it dos put things in a good perspective (DoD do not patch themselves rather rely on the developers and stay on top of things) Really high security Android OS such as copperhead also have such improvements as Knox (way better if you look carefully) but they are limited on what phones it will work on. Also Android 8 is a lot more secure but fact of the matter is the best party that can secure a Samsung phone is Samsung but I am not saying they do. I would recommend Stock Samsung but if you need a custom rom lineage is a good choice this is true also in terms of power (used to be snapdragon charging on a rooted phone is only up to 80% but I think there is a fix) but in versatility a custom rom always wins and power saver settings can be better than the original.