Hey guys i'm just a beginner in roms and cyanogenmod , I have a samsung galaxy SIII with android 4.0.4 and i want to install the new cyanogenmod 10.2 which is based on android 4.3 <<
my question is
1) do i have to update my android version 4.0.4 to 4.3 using software update then install cyanogenmod 10.2 ..
2) OR just flashing cyanogenmod 10.2 will replace the 4.0.4 with jelly bean 4.3 software ???
I know it's an easy question for you .. thanks
Ibrahim_F said:
Hey guys i'm just a beginner in roms and cyanogenmod , I have a samsung galaxy SIII with android 4.0.4 and i want to install the new cyanogenmod 10.2 which is based on android 4.3 <<
my question is
1) do i have to update my android version 4.0.4 to 4.3 using software update then install cyanogenmod 10.2 ..
2) OR just flashing cyanogenmod 10.2 will replace the 4.0.4 with jelly bean 4.3 software ???
I know it's an easy question for you .. thanks
Click to expand...
Click to collapse
You need only to flash ROM and Google apps (if you want them.)
First flash recovery ☺.
Gesendet von meinem GT-I9305 mit Tapatalk
Ibrahim_F said:
Hey guys i'm just a beginner in roms and cyanogenmod , I have a samsung galaxy SIII with android 4.0.4 and i want to install the new cyanogenmod 10.2 which is based on android 4.3 <<
my question is
1) do i have to update my android version 4.0.4 to 4.3 using software update then install cyanogenmod 10.2 ..
2) OR just flashing cyanogenmod 10.2 will replace the 4.0.4 with jelly bean 4.3 software ???
I know it's an easy question for you .. thanks
Click to expand...
Click to collapse
-you must install an advanced CWM recovery either, Philz, TWRP via odin, there are tutorials on that.
-when you have it, you should leave the CM zip and gapps this in the internal or external sd.
-when you have them, you must get into recovery mode by pressing power button, volume up and home button.
-in recovery, you must do wipe data factory reset., wipe cache, and dalvik cache (you find it in this advanced)
-wipes once done, you go denes install from sdcard, you want the zip file of the rom and gapps, whether you left in the internal or external sd. and install first the rom, then gapps.
-once installed, back again, and give it to reboot sistem now.
Now enjoy your new rom :good:
Ibrahim_F said:
Hey guys i'm just a beginner in roms and cyanogenmod , I have a samsung galaxy SIII with android 4.0.4 and i want to install the new cyanogenmod 10.2 which is based on android 4.3 <<
my question is
1) do i have to update my android version 4.0.4 to 4.3 using software update then install cyanogenmod 10.2 ..
2) OR just flashing cyanogenmod 10.2 will replace the 4.0.4 with jelly bean 4.3 software ???
I know it's an easy question for you .. thanks
Click to expand...
Click to collapse
Use the cyanogenmod installer if u wan to be safe.
Sent from my GT-I9300 using xda app-developers app
thankss
!crazy said:
You need only to flash ROM and Google apps (if you want them.)
First flash recovery ☺.
Gesendet von meinem GT-I9305 mit Tapatalk
Click to expand...
Click to collapse
Thanks alot :laugh:
ThQ
Thanss guys for your help :good:
Related
hi there guys i am really new to all this rooting, i rooted my phone on the verison 4.1.1 and i know for my network the 4.1.2 has come out but it wont let me update it to that, is there anyway i can update it to 4.1.2 and keeping root
Cheers
Go to SamMobile and download the latest firmware for your network and flash it
yes there is. Go as decribed to http://www.sammobile.com/firmware/ and look for i9300 with ur network. Then flash via Odin. Keep in mind u will loose ur root and u will have to repeat the rooting process... at least if u want to gain root again,
cheers
If you have the app, you can use mobile odin and flash the firmware with it, you will keep root.
Sent from my GT-I9300 using xda app-developers app
thank you guys,
what if i want to update to another rom but has the version 4.1.2, would i first have to update my rooted s3 to 4.1.2 then root it then put the 4.1.2 rom e.g wanamlite 4.1.2 or can i just install the rom from clockwork recovery ??
usyda1 said:
thank you guys,
what if i want to update to another rom but has the version 4.1.2, would i first have to update my rooted s3 to 4.1.2 then root it then put the 4.1.2 rom e.g wanamlite 4.1.2 or can i just install the rom from clockwork recovery ??
Click to expand...
Click to collapse
If you have a rooted device, you can directly go from 4.1.1 to (any 4.1.2) custom rom. You may have to wipe your device, follow the instructions in the specific ROM thread.
If you are a newbie to rooting / flashing spend more time in reading + choose correct rom for your S3 or else your phone would turn out-to-be a costly paper weight!
ysrini said:
If you have a rooted device, you can directly go from 4.1.1 to (any 4.1.2) custom rom. You may have to wipe your device, follow the instructions in the specific ROM thread.
If you are a newbie to rooting / flashing spend more time in reading + choose correct rom for your S3 or else your phone would turn out-to-be a costly paper weight!
Click to expand...
Click to collapse
Thank you very much exactally what i needed to know
Hi, I have updated and rooted my phone a while ago so I have forgotten a few things... I have CyanogenMod 9.1.0 and android version is 4.0.4... And now I came here and saw that there is android 4.2 and CM 10.1.... But I didn't found any information for updating between those two, there is only for coming from stock firmware. Can I just download 10.1 and install it from Clockwork mod or should I first update to 4.2 and how to do it?
Wipe data/factory reset after flashing the kernel for the new version and install the rom in cwm. All your data will be lost, but your phone should boot
Btw please ask questions in the Q&A forum
Sent from my Nexus 4 running Android 4.2.2
mihahn said:
Wipe data/factory reset after flashing the kernel for the new version and install the rom in cwm. All your data will be lost, but your phone should boot
Btw please ask questions in the Q&A forum
Sent from my Nexus 4 running Android 4.2.2
Click to expand...
Click to collapse
Sorry for the wrong forum...
And tnx for the reply... So no need to update to 4.2 manually, just kernel for rom and then rom?? Will it be like that for any onther custom rom?
filipbg said:
Sorry for the wrong forum...
And tnx for the reply... So no need to update to 4.2 manually, just kernel for rom and then rom?? Will it be like that for any onther custom rom?
Click to expand...
Click to collapse
Yes it's the same for all custom roms. Flash the kernel, boot in cwm and do the wipes, then flash the rom
Btw you could read my guide on how to install a custom rom/kernel to get more information. The link is in the "Roll up sticky thread" in the stickies in general forum :good:
Sent from my Nexus 4 running Android 4.2.2
filipbg said:
Sorry for the wrong forum...
And tnx for the reply... So no need to update to 4.2 manually, just kernel for rom and then rom?? Will it be like that for any onther custom rom?
Click to expand...
Click to collapse
this is the manual way (automatic is SEUS ).. but to ur question yes, it so:
before installing rom, check which kernel needed for this (or if its inside zip, to flash BEFORE install; via fastboot..)
if u switch between stock ics & cm builds OR between cm9 and cm10(.1) FULL WIPE IS recommended!!
if u do only a upgrade like install newest version of smae rom on ur phone u can WIPE NOTHING! (only if u get problem )
yes 1st kernel (recovery (CWM) built in) then ROM ; maybe some addons/gapps (google apps), dun
peace
hello
i have rooted galaxy S2, I9100 with CWM by Philz, the current firmware is the official 4.1.2
the question is : can i install cyanogen 10.1.3 on my 4.1.2 official firmware ??
because how can release 10.1.3 for 4.2.2 and in fact the last official firmware is 4.1.2
iam confusing !
what i need ?
alaa2003 said:
hello
i have rooted galaxy S2, I9100 with CWM by Philz, the current firmware is the official 4.1.2
the question is : can i install cyanogen 10.1.3 on my 4.1.2 official firmware ??
because how can release 10.1.3 for 4.2.2 and in fact the last official firmware is 4.1.2
iam confusing !
what i need ?
Click to expand...
Click to collapse
dont worry about those mate
Cm 10.1.3 will work just fine
No confusions on the android versions
Be sure that u flash the stable build of cm 10.1.3
Gud luck and dont forget to do a nandroid backup
thx for reply
machokingjim said:
dont worry about those mate
Cm 10.1.3 will work just fine
No confusions on the android versions
Be sure that u flash the stable build of cm 10.1.3
Gud luck and dont forget to do a nandroid backup
Click to expand...
Click to collapse
iam afraid after read bellow links because i think they put compatible versions in table view
forum.cyanogenmod.com/topic/74512-where-is-my-google-account-stuff-why-does-play-store-crash/%22%5DWhere
table:
goo.im/gapps
wiki.rootzwiki.com/Google_Apps
advice me
alaa2003 said:
iam afraid after read bellow links because i think they put compatible versions in table view
forum.cyanogenmod.com/topic/74512-where-is-my-google-account-stuff-why-does-play-store-crash/%22%5DWhere
table:
goo.im/gapps
wiki.rootzwiki.com/Google_Apps
advice me
Click to expand...
Click to collapse
choose the gapps package that is compatible with the cm10.1.3 which is the gapps file dated 20130812 and flash it once after you have flashed the rom
Hope i helped
re
machokingjim said:
choose the gapps package that is compatible with the cm10.1.3 which is the gapps file dated 20130812 and flash it once after you have flashed the rom
Hope i helped
Click to expand...
Click to collapse
yep very good
the point which make me conflict is installing CM 10.1.3 on official firmware 4.1.2 ( as table i sent you from CM official site it shows firmware 4.2.2 beside CM 10.1.x) because CyanogenMod not change firmware number i think
could you please clear this for me
alaa2003 said:
yep very good
the point which make me conflict is installing CM 10.1.3 on official firmware 4.1.2 ( as table i sent you from CM official site it shows firmware 4.2.2 beside CM 10.1.x) because CyanogenMod not change firmware number i think
could you please clear this for me
Click to expand...
Click to collapse
u need not worry about those version and firmware details
The statement in those cm sites are about installing the correct gapps package for the correct version of cm
It has nothing to do with incompatibility of latest version for our phones
Be rest assured i run android 4.3.1 in my gs2 gt i9100
---------- Post added at 01:00 AM ---------- Previous post was at 12:56 AM ----------
alaa2003 said:
yep very good
the point which make me conflict is installing CM 10.1.3 on official firmware 4.1.2 ( as table i sent you from CM official site it shows firmware 4.2.2 beside CM 10.1.x) because CyanogenMod not change firmware number i think
could you please clear this for me
Click to expand...
Click to collapse
if you are rooted and know the procedures of rooting, dont be confused and flash cm 10.1.3
You will love it
reply
heheh iam sorry for not press (thanks button) i did laisk eye operation since month
1- this means i can install CM 10.2 direct from recovery mode ( my device is rooted CWM by philz) ??
2- what is the room you are using as you say your android is 4.3.1 ?? :cyclops: ( your device is I9100 or I9100g)
alaa2003 said:
heheh iam sorry for not press (thanks button) i did laisk eye operation since month
1- this means i can install CM 10.2 direct from recovery mode ( my device is rooted CWM by philz) ??
2- what is the room you are using as you say your android is 4.3.1 ?? :cyclops: ( your device is I9100 or I9100g)
Click to expand...
Click to collapse
HI buddy .. U are confusing just the numbers .. actually CM 10x are variant of Jelly beans .. your firmware is official samsung jelly beans for S2 (4.1.2) .. yeah U can install CM 10x through recovery .. just make sure .. u know ..what U are doing .. I mean the proper guide to tackle these things .. nd One thing .. U CANNOT install CM over ur original firmware .. but u will install CM in PLACE of ur original firmware ..
alaa2003 said:
heheh iam sorry for not press (thanks button) i did laisk eye operation since month
1- this means i can install CM 10.2 direct from recovery mode ( my device is rooted CWM by philz) ??
2- what is the room you are using as you say your android is 4.3.1 ?? :cyclops: ( your device is I9100 or I9100g)
Click to expand...
Click to collapse
yes u can directly flash cm through recovery if you are rooted and have a recovery installed
I am running cm10.2 which is the android version 4.3.1
Probably will get the latest 4.4 kitkat soon
Trust me mate u can flash the rom you asked for without worries
thx
machokingjim said:
yes u can directly flash cm through recovery if you are rooted and have a recovery installed
I am running cm10.2 which is the android version 4.3.1
Probably will get the latest 4.4 kitkat soon
Trust me mate u can flash the rom you asked for without worries
Click to expand...
Click to collapse
thanks alot dear
its working perfect now
thanks alot for help
also i can use CM updates over OTA lol
alaa2003 said:
thanks alot dear
its working perfect now
thanks alot for help
also i can use CM updates over OTA lol
Click to expand...
Click to collapse
Anytime mate
alaa2003 said:
hello
i have rooted galaxy S2, I9100 with CWM by Philz, the current firmware is the official 4.1.2
the question is : can i install cyanogen 10.1.3 on my 4.1.2 official firmware ??
because how can release 10.1.3 for 4.2.2 and in fact the last official firmware is 4.1.2
iam confusing !
what i need ?
Click to expand...
Click to collapse
OP, how did you get your phone rooted with Philz kernel? I remember flashing its tar file, but it didn't give me suoeruser
Sent from my GT-I9100 using XDA Premium 4 mobile app
I need best ROMs for my phone gt-s5380i please ..
I am using Kitkat 4.4.3 ROM now,, must I back to stock ROM to use new custom ROM??
MHM0136466 said:
I need best ROMs for my phone gt-s5380i please ..
I am using Kitkat 4.4.3 ROM now,, must I back to stock ROM to use new custom ROM??
Click to expand...
Click to collapse
You can try Latest CM 11 Nightly for s5830i
And yes it is recommended to have stock ROM installed before flashing ROM as Different ROMs use Different File systems .
Link for CM 11 Nightly 4.4.4 s5830i : http://forum.xda-developers.com/galaxy-ace/s5830i-develop/rom-cyanogenmod-11-0-androidarmv6-t2805309
Press TX if i helped you
RahulTech said:
You can try Latest CM 11 Nightly for s5830i
And yes it is recommended to have stock ROM installed before flashing ROM as Different ROMs use Different File systems .
Link for CM 11 Nightly 4.4.4 s5830i : http://forum.xda-developers.com/galaxy-ace/s5830i-develop/rom-cyanogenmod-11-0-androidarmv6-t2805309
Press TX if i helped you
Click to expand...
Click to collapse
I would like a lollipop rom, which I recommended??I pissed the revolution rom 4.1.2 and kernel apolo 4.12. What should I do to install the new rom? I only need to update the recovery?
SkyLine9926 said:
I would like a lollipop rom, which I recommended??I pissed the revolution rom 4.1.2 and kernel apolo 4.12. What should I do to install the new rom? I only need to update the recovery?
Click to expand...
Click to collapse
I had resurrection rom for my S2, personally i liked but the stock camera didn't work so i downgraded my phone to android 4.4.4 NeatROM BETA2.
If you want to download the rom then here's a link If you want to download the rom then here's a link http://forum.xda-developers.com/gal...ives/rom-resurrection-remix-lp-5-2-5-t2987338
jasondutch said:
I had resurrection rom for my S2, personally i liked but the stock camera didn't work so i downgraded my phone to android 4.4.4 NeatROM BETA2.
If you want to download the rom then here's a link If you want to download the rom then here's a link http://forum.xda-developers.com/gal...ives/rom-resurrection-remix-lp-5-2-5-t2987338
Click to expand...
Click to collapse
how do I install NeatROM? Can you tell me all the steps to do, if possible I would like to install the kernel apolo
SkyLine9926 said:
how do I install NeatROM? Can you tell me all the steps to do, if possible I would like to install the kernel apolo
Click to expand...
Click to collapse
Pre-requisites
1. Alright, First make sure that your mobile is the I9100 version.
You can find this in settings -> about phone
2. Make a backup in CWM or TWRP ( what version you have)
3. download Samsung USB drivers
Download
https://goo.im/devs/aospa_legacy/i9100/pa_i9100-4.3-BETA2-20140501.zip/ ROM
https://www.androidfilehost.com/?w=files&flid=15801 GApps package
download the 2 packages and place them in the root of your SD or Internal sd card
Go in to recovery mode
make a backup DONT IGNORE/SKIP THIS STEP IF ANYTHING GOES WRONG YOU CAN BACKUP
do a factory reset , wipe cache, wipe dalvik cache
Install the rom first and then the gapps,
then reboot and then wait enjoy