Related
Hello everyone,
I've just bricked my S2.
It won't start at all.
I've flashed I9100XXLP1_I9100OXALP1_OXA and tried to root it with cf-root-sgs2_xx_oxa_ki3-v4.1-cwm4
After the root it won't start up, it was showing SAMSUNG and the yellow triangle with a ! in it.
I've tried to re flash the XXLP1 and it won't start flashing, so I pulled the data cable.
And now it won't start.
PLS HEEEELP!!!
I'm from Romania, maybe someone from Bucharest can help me.
It is not mine, and the owner is anxious to see it, I just wanted to help her unlock it, and..... (
pls help!!
thx a lot!!!
try a usb jig but seems like its a complete brick if it will not turn, needs jtagging by the sounds of it,
can you go into download mod? flash stock firmware in download mod via odin by press volume down +home button + power.
humaila said:
Hello everyone,
I've just bricked my S2.
It won't start at all.
I've flashed I9100XXLP1_I9100OXALP1_OXA and tried to root it with cf-root-sgs2_xx_oxa_ki3-v4.1-cwm4
After the root it won't start up, it was showing SAMSUNG and the yellow triangle with a ! in it.
I've tried to re flash the XXLP1 and it won't start flashing, so I pulled the data cable.
And now it won't start.
PLS HEEEELP!!!
I'm from Romania, maybe someone from Bucharest can help me.
It is not mine, and the owner is anxious to see it, I just wanted to help her unlock it, and..... (
pls help!!
thx a lot!!!
Click to expand...
Click to collapse
1) You didn't read instructions... Why would you try to root a XXLP1 >> ICS << Rom with a KI3 >> Gingerbread << CF-Root ? It states in Chainfire's thread to find the matching letters and root it with the corresponding kernel... You DIDN'T bother to read.
2) Like the poster above said, try entering download mode, and flashing stock ROM again... If you can't, read >> 4)
3) You can try with a USB Jig, though i doubt it will help...
4) Seems like it's completely bricked, probably will need jtag repair, or maybe you can get lucky with warranty + samsung repair service
5) Learn to read...
E_Goldstein said:
try a usb jig but seems like its a complete brick if it will not turn, needs jtagging by the sounds of it,
Click to expand...
Click to collapse
this is what I want to do next
thx
sopheaknhek said:
can you go into download mod? flash stock firmware in download mod via odin by press volume down +home button + power.
Click to expand...
Click to collapse
nope, it's completely dead
@gr4ndm4st3r_bl4ck
yes, my bad
do you think that if I send it back from where I bought it and lie them that it didn't start at all, and that I didn't do anything they will replace it?
it is worth it to try or they will figure it out?
thanks
You could send it into your carrier/Samsung for repair & they might repair it anyway, but there's a much greater chance they'll charge you for it.
A jig is very unlikely to work, but for the sake of a few dollars is worth a try.
Do a search for JTAG repair on here/Google (here's one to get you started). This will probably be cheaper than having it repaired by Samsung/whomever does their repairs in your country.
Which option you choose is obviously up to you.
As MistahBungle said, you could try taking it to samsung and they might repair it under warranty,no questions asked...then again,they could charge you more likely than not... If that happened to me I would take the phone to samsung as i don't trust those shady guys doing jtag repairs... they fu** something up, you lose warranty, you get left without a phone...my 2 cents
Sent from my GT-I9100 using XDA App
gr4ndm4st3r_bl4ck said:
As MistahBungle said, you could try taking it to samsung and they might repair it under warranty,no questions asked...then again,they could charge you more likely than not... If that happened to me I would take the phone to samsung as i don't trust those shady guys doing jtag repairs... they fu** something up, you lose warranty, you get left without a phone...my 2 cents
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I sent it back to them.
Reason: I tried to update via Kies and it went black.
They said it will be replaced -> YEEEEY!!!
Thanks a lot for you concern.
humaila said:
I sent it back to them.
Reason: I tried to update via Kies and it went black.
They said it will be replaced -> YEEEEY!!!
Thanks a lot for you concern.
Click to expand...
Click to collapse
No problem dude, glad you managed to get it under warranty Just make sure you read the instructions carefully next time
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to ICS STOCK LPQ.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
EDIT:
Ok.
So usb jig arrived this morning. Ripped it open. Popped my sgsII from charger (fully charged I think!) took battery out - 15 secs
placed battery back in.
Inserted USBJIG. . .
. . .
. . . . BLACK SCREEN OF DEATH
Nothing....Still the same. No screen activity...sad...
only way is either JTAG or Samsung service center right?
I used to have yellow exclamation mark + 4 counts....but they can't see anything so they won't know right?
or did the usbJig work but just the fact that I can't see anything on the screen??
...sad I hated seeing noobs flashing phones improperly and crying when it got softbricked....well even though mine is a straight hardbrick i still feel sad....noob
update.
I've taken it to SSCentre on tuesday. I called them yesterday and they said they couldn't fix it over there and had it shipped somewhere else...is that bad?
it could take upto 2 weeks!!!!!!
I rememeber the engineers working on my friends Galaxy S last year and they didn't have to send it to somewhere else. (he had the soft brick 3 yellow logo icons) and didn't have the version where the download/recovery mode didn't work) The engineer just flashed it with latest stock sgs firmware (ignoring that csc was orange lol)
Maybe my flash was so impeccable I fried the motherboard? I'm one kick ass bricker....
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
I'm assuming download mode and recovery also don't work when the device is powered off?
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
Hmm have you tried getting into download mode to see if the device shows up in odin?
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
If you can get into download mode then there is still hope. If you can't then your only option is either warranty repair of Jtag service. If download mode then works then just reflash using Odin.
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
hiepgia said:
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
Click to expand...
Click to collapse
Didn't even notice that XXJVU was an i9000 firmware.
To OP: Yup nothing to do, but send it in for repairs.
yeah sorry not JVU LPQ (I was getting mixed up with firmwares)
Yeah phone not going into download or recovery mode.
I think when I press the power button the phone does turn on but I get nothing but black screen....(the phone warms up)
So shall I order a JTAG to flash? or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment..... so worried!
dk206 said:
yeah sorry not JVU LPQ (I was getting mixed up with firmwares)
Yeah phone not going into download or recovery mode.
I think when I press the power button the phone does turn on but I get nothing but black screen....(the phone warms up)
So shall I order a JTAG to flash? or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment..... so worried!
Click to expand...
Click to collapse
Are u sure?
vol down+power+home button is download mode
Check it once again if it doesn't work...
maybe u can try some usb-jigg ?!
so you can come in to download-mode and then flash with odin =(
dk206 said:
ye
So shall I order a JTAG to flash?
JTag is not Samsung warranty its a paid for service .
or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment....
.
Warranty is void with custom rom root or rom counter above zero .
Will they know yes counter is on 4 .
Will they ignore it and put it through as warranty they may but dont count on it .
USB jig would be the starting point .
That fails you could go to warranty repair if thats rejected then pay for JTag repair .
jjue
Click to expand...
Click to collapse
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
dk206 said:
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
Click to expand...
Click to collapse
eBay. Or Google.
first charge it. Then try to enter download mode again. I have exp. 1 time battery low and phone just warm up and black screen. After Charge, it's ok till now!
dk206 said:
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
Click to expand...
Click to collapse
Read the post USB jigs to loan out
http://forum.xda-developers.com/showthread.php?t=1495867
jje
if you have adb maybe you could try:
1. Connecting your device to PC while turned off,
2. CMD > adb devices
* If you see your device connected, proceed with:
adb reboot recovery or adb reboot bootloader
* If you don't see any device connected, try googling for qhsusb_dload driver for your device, and after you install them (and maybe a couple of PC restarts) repeat step 2
3. if you manage to get to recovery, i hope you have your nandroid backup so you could restore them.
my HTC sensation 4G had this situation few days ago, couldn't go to recovery/bootloader, blanked out when turned on and had fever
i fixed it using those steps, i wish i could remember where i got the qhsusb driver thingy from.. i'll let you know when i remember.
edit: it might work on S2, or might not.. i don't know this will help or not, but you could read adb/fastboot/bootloader/android 101, maybe you could get something from there
hiepgia said:
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
Click to expand...
Click to collapse
The bootloader death thing is not 100% true. When I first got my phone, (when there wasn't any rom for it) I tried flashing a I9000 rom. I was so stupid and luckily it didn't break my phone. After the flashing it turned on and stayed on bootlogo.
It was a miracle for me!
Ok.
So usb jig arrived this morning. Ripped it open. Popped my sgsII from charger (fully charged I think!) took battery out - 15 secs
placed battery back in.
Inserted USBJIG. . .
. . .
. . . . BLACK SCREEN OF DEATH
Nothing....Still the same. No screen activity...sad...
only way is either JTAG or Samsung service center right?
I used to have yellow exclamation mark + 4 counts....but they can't see anything so they won't know right?
or did the usbJig work but just the fact that I can't see anything on the screen??
...sad I hated seeing noobs flashing phones improperly and crying when it got softbricked....well even though mine is a straight hardbrick i still feel sad....noob
You just got to hope for the guy that repairs it not to see or not to care about custom roms etc .
jje
JJEgan said:
You just got to hope for the guy that repairs it not to see or not to care about custom roms etc .
jje
Click to expand...
Click to collapse
Ok update.
I've taken it to SSCentre on tuesday. I called them yesterday and they said they couldn't fix it over there and had it shipped somewhere else...is that bad?
it could take upto 2 weeks!!!!!!
I rememeber the engineers working on my friends Galaxy S last year and they didn't have to send it to somewhere else. (he had the soft brick 3 yellow logo icons) and didn't have the version where the download/recovery mode didn't work) The engineer just flashed it with latest stock sgs firmware (ignoring that csc was orange lol)
Maybe my flash was so impeccable I fried the motherboard? I'm one kick ass bricker....
you should have tried download mode blindly first. as i have flashed once blindly and it fixed my all dead screen.
Hi,
While i was trying to reset flash/binary counter, i click reset counter n after some process, phone switched off.. i waited a little while to reboot but it didn't. then, i switched on by myself but when samsung galaxy logo appears, it died.. i tried many times but couldn't go after that.. then i tried to boot in recovery mode but it also didn't worked. thankfully i could boot in download mode and had root with odin [CMW 6.4] to run recovery mode n it worked. but after rooting my s3, i switched on n see pin code screen.. then, i realized the main issue "my touchscreen is not working" !! i don't know how it happen but phone looks fine, rom is working well but touchscreen is not working.
At first, i boot in recovery mode n wipe all data (factory reset), cache n dalvik cache and with a great hope, restarted my s3 but still had same issue. then, i remember i had a nandroid backup n i boot in recovery mode again. i restored it n restarted. but even i get back my previous settings, touchscreen still doesn't work. i can see wallpaper n then pin code screen but i can't do anything. it doesn't respond my touch n screen goes black. only vol. up/down, home n power buttons working. i guess
don't know to solve this mess. my s3 is a SHV-E210K n i got 4.1.1 JB. There're much people who use this device so that i couldn't find any solution. if somebody can help me to get out from this trouble, gonna be appreciated.
waiting your help guys, thanks in advance.
i think we already have 4 with identical case, all you can do now is to go to samsung service center for warranty, i think the touchscreen panel or digitizer had been damage. check the triangleaway thread in gs2 forum they report their problem and solution there.
Have u tried to flash the param.tar with odin?
Sendt fra min GT-I9300 med Tapatalk2
chris151722 said:
i think we already have 4 with identical case, all you can do now is to go to samsung service center for warranty, i think the touchscreen panel or digitizer had been damage. check the triangleaway thread in gs2 forum they report their problem and solution there.
Click to expand...
Click to collapse
i would do that but i bought this from Korea and in my country, company doesn't support warranty unfortunately. but i don't understand how a software can damage my touchscreen in seconds?!.
qassamy88 said:
Have u tried to flash the param.tar with odin?
Sendt fra min GT-I9300 med Tapatalk2
Click to expand...
Click to collapse
i've seen it but no, i didn't. what's param? i'll try right now.
It's under chains post.
It will maybe help.
Sendt fra min GT-I9300 med Tapatalk2
---------- Post added at 12:23 PM ---------- Previous post was at 12:14 PM ----------
I can't find right now.
If you have a e-mail I can send it.
I have it on my phone.
Or else you have to wait till I come home.
Sendt fra min GT-I9300 med Tapatalk2
i've tried flashing with param.tar but nothing changed..
qassamy88 said:
It's under chains post.
It will maybe help.
Sendt fra min GT-I9300 med Tapatalk2
---------- Post added at 12:23 PM ---------- Previous post was at 12:14 PM ----------
I can't find right now.
If you have a e-mail I can send it.
I have it on my phone.
Or else you have to wait till I come home.
Sendt fra min GT-I9300 med Tapatalk2
Click to expand...
Click to collapse
i wrote my email to u on PM.. i need fast solution, if u send earlier, would be better..
egolgeli said:
i would do that but i bought this from Korea and in my country, company doesn't support warranty unfortunately. but i don't understand how a software can damage my touchscreen in seconds?!.
my mistake as i did not see where you live, i think not the actual touch panel was damaged but some other electronic parts in panel assembly has been damaged, i also waiting and hoping for possible software fix before i go to service center for warranty. but i think it is possible, do you know the emmc brick problem caused by flashing firmware that is a hardware damaged by software.
other guy with e210k in another thread already went to samsung service center for repair and they replaced the touchscreen.
Click to expand...
Click to collapse
I have just sent it.
---------------------
By Izzob
yowillu exclusive
qassamy88 said:
I have just sent it.
---------------------
By Izzob
Click to expand...
Click to collapse
thank you. i tried with the param.tar which u sent me but nothing changed i left my phone to a phone technician who i know, waiting to hear from him. then i gonna write the result here..
egolgeli said:
thank you. i tried with the param.tar which u sent me but nothing changed i left my phone to a phone technician who i know, waiting to hear from him. then i gonna write the result here..
Click to expand...
Click to collapse
hi, is your phone repaired? mine not repaired yet i will go tomorrow to samsung a/s for warranty.
chris151722 said:
hi, is your phone repaired? mine not repaired yet i will go tomorrow to samsung a/s for warranty.
Click to expand...
Click to collapse
hi,
today, i get my phone back n didn't repaired cos they offered to change led screen + touch screen n it costs around 400$.. so that, i didn't but there's no way to fix it with a software.. i'm looking for a cheaper solution
do u think they will samsung gonna accept to repair your phone with warranty? cos if they see that u rooted your device, it's out of warranty..
i think you have no other choice then, you can't revive dead electronic parts by software, just take your chance maybe they will not notice it, just tell them that your touchscreen is not functioning. just went to samsung service center this morning for my s3 e210k repair and they replaced my front cover and display assembly to a new one and it is running smoothly again. lucky me my counter is 0 and status is official that why didn't pay any charge.
chris151722 said:
i think you have no other choice then, you can't revive dead electronic parts by software, just take your chance maybe they will not notice it, just tell them that your touchscreen is not functioning. just went to samsung service center this morning for my s3 e210k repair and they replaced my front cover and display assembly to a new one and it is running smoothly again. lucky me my counter is 0 and status is official that why didn't pay any charge.
Click to expand...
Click to collapse
yeah, you are really lucky n im convinced that i can't revive it with any software. i will send my device to warranty but still couldn't reset my counter. everything is official on odin mode but just counter says yes (9 counts). i connect usb mouse to my device via on the go usb cable n control all functions with mouse. i tried to use triangle away again but when it needs to reboot the device, samsung logo goes dead or goes crazy with different colours. everytime, i install CWM again to get back my device.
pls, someone tell me how to reset counter with triangle away! i created a folder in sdcard directory which named "triangleaway" n put there triangleaway v2.3.6 apk n param.tar then run the application. but it doesn't reboot the device, goes dead. don't know how to use param.tar file. what should i do for a proper reset? i need to reset countern then i will flash official firmware to send my device to warranty.
egolgeli said:
yeah, you are really lucky n im convinced that i can't revive it with any software. i will send my device to warranty but still couldn't reset my counter. everything is official on odin mode but just counter says yes (9 counts). i connect usb mouse to my device via on the go usb cable n control all functions with mouse. i tried to use triangle away again but when it needs to reboot the device, samsung logo goes dead or goes crazy with different colours. everytime, i install CWM again to get back my device.
pls, someone tell me how to reset counter with triangle away! i created a folder in sdcard directory which named "triangleaway" n put there triangleaway v2.3.6 apk n param.tar then run the application. but it doesn't reboot the device, goes dead. don't know how to use param.tar file. what should i do for a proper reset? i need to reset countern then i will flash official firmware to send my device to warranty.
Click to expand...
Click to collapse
i think you cannot reset counter now as your touchscreen is not working, you need to use triangleaway apk to reset counter. try your luck if you have usb jig to reset it maybe it will work for you.
i think the best you can do now is to flash stock rom and send it to a/s and pray that they will not check the counter.
Don't try your like. It can be done. Has every one of you forgot that sgs3 supports a wired mouse? Just get a USB adaptor and conect a mouse to your phone. Than you can start triangle away.
Sent from my GT-I9300 using Tapatalk 2
chris151722 said:
i think you cannot reset counter now as your touchscreen is not working, you need to use triangleaway apk to reset counter. try your luck if you have usb jig to reset it maybe it will work for you.
i think the best you can do now is to flash stock rom and send it to a/s and pray that they will not check the counter.
Click to expand...
Click to collapse
touchscreen isn't working but i can use all features with usb mouse. i flashed stock rom then rooted. n ran triangle away again but when it reboots, samsung logo appears n then goes dead.. don't know how to reset with usb jig. i guess i'll try my luck n send to warranty.
catanzaro27 said:
Don't try your like. It can be done. Has every one of you forgot that sgs3 supports a wired mouse? Just get a USB adaptor and conect a mouse to your phone. Than you can start triangle away.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
i tried this way many times but result is same always. i need another solution.
egolgeli said:
touchscreen isn't working but i can use all features with usb mouse. i flashed stock rom then rooted. n ran triangle away again but when it reboots, samsung logo appears n then goes dead.. don't know how to reset with usb jig. i guess i'll try my luck n send to warranty.
i tried this way many times but result is same always. i need another solution.
Click to expand...
Click to collapse
No you still have chance of resetting counter as you can use usb otg, dont use triangleaway 2.36 again after flashing stock rom and root instead use triangleaway 2.2 to 2.30 it will work im sure as i use 2.2 without softbrick.
chris151722 said:
No you still have chance of resetting counter as you can use usb otg, dont use triangleaway 2.36 again after flashing stock rom and root instead use triangleaway 2.2 to 2.30 it will work im sure as i use 2.2 without softbrick.
Click to expand...
Click to collapse
thx chris, i tried with TA v2.20 and it worked. now, my phone's firmware is same as first day but touchscreen still not responding.. but, i gonna send it to warranty.
btw, i don't know how i did but i checked my imei (*#06#) and it shows just fifteen 0 (zero).. i don't know how i delete it, i tried many ways to flash counter n i did it somehow. do u think that this's a certain problem? n is it problem for warranty or they gonna fix it?
egolgeli said:
thx chris, i tried with TA v2.20 and it worked. now, my phone's firmware is same as first day but touchscreen still not responding.. but, i gonna send it to warranty.
btw, i don't know how i did but i checked my imei (*#06#) and it shows just fifteen 0 (zero).. i don't know how i delete it, i tried many ways to flash counter n i did it somehow. do u think that this's a certain problem? n is it problem for warranty or they gonna fix it?
Click to expand...
Click to collapse
Did u do an efs backup ???
If yes check the forums for a way to restore it
Sent from my GT-I9300 using xda premium
egolgeli said:
thx chris, i tried with TA v2.20 and it worked. now, my phone's firmware is same as first day but touchscreen still not responding.. but, i gonna send it to warranty.
btw, i don't know how i did but i checked my imei (*#06#) and it shows just fifteen 0 (zero).. i don't know how i delete it, i tried many ways to flash counter n i did it somehow. do u think that this's a certain problem? n is it problem for warranty or they gonna fix it?
Click to expand...
Click to collapse
that good! i dont think they will check it but to be sure you have to restore your imei before sending to warranty, there are many ways to fix it here in xda just search it.
i bought my samsung galaxy s2 this week. i tried to install jally beans to it....
using Odin i tried to install cmw recovery mode.
after restert i got a huge problem. my phone is not working. stuck with a black screen...
but still getting heat,
nothin happens i tried to connect to computer.... no result
hold power+vol up+home button.... no result,
please help me... its a new mobile i used it only for two days
many thanks in advance...
Download any stock ICS rom, hold VOL DOWN, home and THEN power and flash rom via odin
Nazwan ali said:
i bought my samsung galaxy s2 this week. i tried to install jally beans to it....
using Odin i tried to install cmw recovery mode.
after restert i got a huge problem. my phone is not working. stuck with a black screen...
but still getting heat,
nothin happens i tried to connect to computer.... no result
hold power+vol up+home button.... no result,
please help me... its a new mobile i used it only for two days
many thanks in advance...
Click to expand...
Click to collapse
Bro please watch this then give us some more info..
PS: Did you install CWM through Odin? Why on earth would you do that! Also if you wiped your device on ICS using CWM you may be up sh%t creek without a paddle, because your device might be permanently hard bricked
Nazwan ali said:
i bought my samsung galaxy s2 this week. i tried to install jally beans to it....
using Odin i tried to install cmw recovery mode.
after restert i got a huge problem. my phone is not working. stuck with a black screen...
but still getting heat,
nothin happens i tried to connect to computer.... no result
hold power+vol up+home button.... no result,
please help me... its a new mobile i used it only for two days
many thanks in advance...
Click to expand...
Click to collapse
Like said here before, if you installed CWM on an unsafe Kernel (usually Stock Kernel present on 4.0.4 and 4.1.2 Stock Firmware) and after that wiped your data/cache etc. there is a good probability that you hard-bricked your device. Not even JTAG will help, if it`s the eMMC hardbrick.
Try to get into download mode and flash a Stock 4.0.3 Firmware and if you can`t then try a USB Jig to get into download mode and if that doesn`t work you probably hardbricked your device as described above
Read this on more info about eMMC superbrick:
http://forum.xda-developers.com/showthread.php?t=1756242
details
Yes!!! I do believe that I know don't much about android. because I am very new at android... that's why I am bagging for u guys help.
I hope u Guys will teach me how to fix this situation.
I Used Odin 3 1.85 to install CMW. While the installation process taking place an error occur. and automatically shut down. show up an message
"firmware upgrade encountered an issue. try to connect kies...." after 10-15 mins showing this message
display gets black and stuck. i tried everything that is possible to me. press and holding power+VOL up+home together, leave it for charge etc.
but nothing works
COULD ANYONE HELP ME ON THIS SITUATION. :crying:
As said before, Try power + volume Down + home and flash a stock firmware through Odin
And is there still any life at all? What about when charging. Is there the charging animation?
Also maybe read through this? https://t-mobile.jive-mobile.com/#jive-discussion?content=/api/core/v1/discussions/27132
Sent from my Galaxy SII
re
No charging animation, nothing happens when when i press those buttons....
no download mode, recovery mode.
i think it is HARD BRICKED...
Nazwan ali said:
No charging animation, nothing happens when when i press those buttons....
no download mode, recovery mode.
i think it is HARD BRICKED...
Click to expand...
Click to collapse
hardbrick in less than a week? blamesamsung PP
you can try smashing the phone at a samsung repair service manager
Unexist6969 said:
hardbrick in less than a week? blamesamsung PP
you can try smashing the phone at a samsung repair service manager
Click to expand...
Click to collapse
Why is it Samsungs fault.. You have to take the risks of flashing stuff on your device. This guy obviously did not do his research...
Sent from my GT-I9100 using xda premium
Exactly. Hardly Samsung's fault when 'tards don't RTFM (which seems to be happening a lot more than it used to around here).
kilometers4 said:
Why is it Samsungs fault.. You have to take the risks of flashing stuff on your device. This guy obviously did not do his research...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
re
So, there is no hope to repair my phone.
Android sucks......... if it is an iphone I can handle it my self
Oh yes. Android obviously sucks given you didn't have the cerebral matter to do your research before you started doing things that could potentially trash your phone
Only one thing is to blame in this instance. And that's you.
thnkx
Thank you guys, I appreciate your help...
it helps me a lot. I will never ever forget about this helpful forum.... i AM LEAVING THIS FORUM WITH A HAPPY FACE. :laugh:
Remember to switch off the lights on your way out....
Nazwan ali said:
So, there is no hope to repair my phone.
Android sucks......... if it is an iphone I can handle it my self
Click to expand...
Click to collapse
I love comments like this. Well if you don`t read properly how and what to flash at what time to your device and just do as you think is right then you are going to end up with a hardbrick. That`s nobodies fault but yours. Why did you buy an Android phone in the first place if you can handle an IPhone better?
Nazwan ali said:
Thank you guys, I appreciate your help...
it helps me a lot. I will never ever forget about this helpful forum.... i AM LEAVING THIS FORUM WITH A HAPPY FACE. :laugh:
Click to expand...
Click to collapse
If you have an hardbrick and you can`t even get into download mode, what do you expect people to do? We are normal human beings here, there are no miracles here. If you have an hardbrick, you can try to repair it via Jtag or send it to a Samsung service center if you are still on warranty but if you complain about Android and how much it sucks you won`t be making many friends here, since this is an Android community.
Hello!
I have big problem . I try to flash this http://forum.xda-developers.com/showthread.php?t=1573392 and root phone , but then odin stuck at the set partition i pull off the battery but now phone wont turn on.
Help me please because this is not my phone
Thank you
What phone has your boyfriend got.Your either flashing wrong rom or your in the wrong forum.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
theunderling said:
What phone has your boyfriend got.Your either flashing wrong rom or your in the wrong forum.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
Click to expand...
Click to collapse
He have i9100 2.3.3 . I flash it correctly because i do this many times on my i9000
I just wanna come back to download mode but i cant because phone does not respond on nothing :S
Its phone " broken " now ?
Nemivsek said:
He have i9100 2.3.3 . I flash it correctly because i do this many times on my i9000
Click to expand...
Click to collapse
Are you trying to be funny,or are you too stupid to understand what I said.
Why are you flashing a i9000 rom on a i9100 phone.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
theunderling said:
Are you trying to be funny,or are you too stupid to understand what I said.
Why are you flashing a i9000 rom on a i9100 phone.
-------------------------------------------
maybe your an iphone expert
------------------------------------------[/QUOT
Oh no :S All the time i was thinking that this " http://forum.xda-developers.com/showthread.php?t=1573392 " is for 9100 but now i look again and i see that is for i9000
How i was so stupid : / I just wanna do this fast and i dont looked good what i downloaded :S I screw all
Click to expand...
Click to collapse
"It's an I9100 and I know I'm flashing the right ROM as I'm always flashing my I9000".
No need to call her stupid.
@ OP tell us what have you tried to flash?
Edit: So you followed an I9000 thread and you flashed another device's ROM onto your bf's device.
You also pulled the battery while it was flashing.
Can you at least get to download mode?
Second Edit: no, you can't, get a usb jig and get ready to have it jtagged.
No need to post again what she said,I read it the 1st time around.
Maybe edit no.3 could maybe hint/ advise at possible warranty.
Maybe include a lame pic too.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
Now I can't edit thanks to you...
No memes...it doesn't call for it...
So...you're calling her stupid just for kicks? That's better than being slow I guess....
Be my guest, elaborate on the warranty, it's gonna be fun.
Go ahead
I think the only hope is to make home made USB Jig....
As long as there's hope...
You can buy it, you can make it, you can tell your bf what you did and ask him if his warranty is still good.
You still got options.
Sent from my GT-I9100 using xda app-developers app
gastonw said:
As long as there's hope...
You can buy it, you can make it, you can tell your bf what you did and ask him if his warranty is still good.
You still got options.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
He know already because he is with me right now... He will give phone to someone else who know alot about phones..
Btw my home made usb Jig dont work maybe i make it wrong but i looked all steps how to make it and im pretty sure i do it right
3 100K resistors on pin 4 and 5...
http://shrani.si/f/2Y/I/3tCN5aD3/fotografija0193.jpg
I dunno the specifics of the jig, I assume you followed the thread.
Try this:
One of you must hold the battery (it's almost a 2 man job) while the other presses the download combo (Vol Down + home + power ).
While pressing those buttons the person holding the battery must insert it (at the same time the combo is being hit).
See if it boot into download mode.
If not, start thinking jtag.
Warranty, not an option I presume.
Sent from...this is not even my S2
gastonw said:
I dunno the specifics of the jig, I assume you followed the thread.
Try this:
One of you must hold the battery (it's almost a 2 man job) while the other presses the download combo (Vol Down + home + power ).
While pressing those buttons the person holding the battery must insert it (at the same time the combo is being hit).
See if it boot into download mode.
If not, start thinking jtag.
Warranty, not an option I presume.
Sent from...this is not even my S2
Click to expand...
Click to collapse
Ok my USB Jig work on my mothers phone , but not on S2 this is now big problem :S I think phone is ruined :S
I will try this metod with battery ..
I will try this metod with battery ..[/QUOTE said:
It doesnt work :S
Click to expand...
Click to collapse
Jtag.
Sent from...this is not even my S2
Yeah , no other option here :/
Can you give me link for some cheap jtag programmer ? Or its better to give phone someone who have jtag box and i pay him ?
Yeap, you need to find someone who does jtagging.
A couple of guys started a thread about this info, it was based in India; I don't know if they expanded the grid.
Sent from...this is not even my S2