Hi all, currently im using Cyanogenmod 10.2 (20131231) latest official build for android 4.3 JB (CWM 6.0.4.5) and mind to change to omni official build 4.4 KK. After copy and paste the zip files into my SD (ROM 20140101 & Pa_gapps 20131230), i go to recovery mode and wipe everything (wipe data/factory reset, cache , dalvic). after all done then i install the zip files (ROM & Pa_gapps), then i reboot recovery and then reboot system. All installation smoothly with no problem. The problem come after the omni logo loading is done, it should let us to choose a language , register a google account , set up wifi and etc. The screen become blank (black screen), not shows all that particular. The only appear on the screen are battery indicator, line icon and notification bar (can pull it down and can access to all function button there like setting, gps, mobile data, wifi, brightness). When i push home screen button, it become black screen again. I can lock and unlock it but i will become black screen after i unlock it.
so what are actually the problem im facing ? if there any solution i would be thanked
biscuits01 said:
Hi all, currently im using Cyanogenmod 10.2 (20131231) latest official build for android 4.3 JB (CWM 6.0.4.5) and mind to change to omni official build 4.4 KK. After copy and paste the zip files into my SD (ROM 20140101 & Pa_gapps 20131230), i go to recovery mode and wipe everything (wipe data/factory reset, cache , dalvic). after all done then i install the zip files (ROM & Pa_gapps), then i reboot recovery and then reboot system. All installation smoothly with no problem. The problem come after the omni logo loading is done, it should let us to choose a language , register a google account , set up wifi and etc. The screen become blank (black screen), not shows all that particular. The only appear on the screen are battery indicator, line icon and notification bar (can pull it down and can access to all function button there like setting, gps, mobile data, wifi, brightness). When i push home screen button, it become black screen again. I can lock and unlock it but i will become black screen after i unlock it.
so what are actually the problem im facing ? if there any solution i would be thanked
Click to expand...
Click to collapse
Also format system under mounts and storage
And then install zips
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Also format system under mounts and storage
And then install zips
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
thanks,i will try after finnish downloading 20140102 build
already format the system,wipe data/factory reset,wipe cache,wipe dalvic
but still the same.cant set up google account like we just bought a new phone
biscuits01 said:
already format the system,wipe data/factory reset,wipe cache,wipe dalvic
but still the same.cant set up google account like we just bought a new phone
Click to expand...
Click to collapse
might be gapps problem or even the rom but im assuming its the gapps
use this CORE GAPPS
hope this helps
thuva06 said:
might be gapps problem or even the rom but im assuming its the gapps
use this
hope this helps
Click to expand...
Click to collapse
thanks mate, its works. yeah gapps problem.
can i install additional gapps after on ? like camera for KK, galery for KK
biscuits01 said:
thanks mate, its works. yeah gapps problem.
can i install additional gapps after on ? like camera for KK, galery for KK
Click to expand...
Click to collapse
yes your free to flash anythig
dont thank with words mate
Related
So I installed Paranoid Android 2.9.9 from
http://forum.xda-developers.com/showthread.php?t=1765185
I installed the rom and also
Flash Bluesleep Fix:
Options Chooser
The roms starts withouth gapps , and using the option chooser wont install them ,
I dont know if it s because og my clockwork recovery version, I had a 5.0 something and reading I moved to a 6.0.15
when I run the gapps installation file Options_Chooser_JB_Version_4_Olympus gives me status 0 at the end
somtimes when I reboot the romm I get the signed (updating andrioid ) and the sign counts like its installing the apps, and in fact some of them get installed like the not google ones, but cant get to install the playstore or the gmail one.
the only thing that I want is to be able to get netflix to install it on my lcd, didnt know it was that difficult. any clue ?
did you try wipe dalvik and cache, maybe a factory reset prior flashing gapps, and then clean dalvik and cache would help , somewhere ive read that a X2 flash rom X2 flash gapps X2 wipes could do the trick
sent from the gray stuff inside my skull
demonoid phenomenom said:
did you try wipe dalvik and cache, maybe a factory reset prior flashing gapps, and then clean dalvik and cache would help , somewhere ive read that a X2 flash rom X2 flash gapps X2 wipes could do the trick
sent from the gray stuff inside my skull
Click to expand...
Click to collapse
tried it and didn't work
cherupop said:
So I installed Paranoid Android 2.9.9 from
http://forum.xda-developers.com/showthread.php?t=1765185
I installed the rom and also
Flash Bluesleep Fix:
Options Chooser
The roms starts withouth gapps , and using the option chooser wont install them ,
I dont know if it s because og my clockwork recovery version, I had a 5.0 something and reading I moved to a 6.0.15
when I run the gapps installation file Options_Chooser_JB_Version_4_Olympus gives me status 0 at the end
somtimes when I reboot the romm I get the signed (updating andrioid ) and the sign counts like its installing the apps, and in fact some of them get installed like the not google ones, but cant get to install the playstore or the gmail one.
the only thing that I want is to be able to get netflix to install it on my lcd, didnt know it was that difficult. any clue ?
Click to expand...
Click to collapse
had the exact same issue ! >>>follow those steps and you will have a 100% workin Paranoid<<<
1st : do you try coming from another ROM ? Did you wipe/Fresh, or you are actually updating ?
2nd : th3bill actually are working to make the option chooser smaller since it is too big for our atrix system partition
3rd : just go to paranoid thread and see what ive done if you absolutely want that option chooser to work (NOT RECOMMENDED as it cause issues)
Workaround that really works no problem : go to recovery now that you have a fully working paranoid 2.9.9 that dont have any gapps and flash without wiping everything (that will NOT erase your app.. Just the ROM)
Reboot into Recovery
THEN :
Recovery>wipe CACHE partition
Recovery>advance>wipe dalvik cache (then go back)
Recovery>mounts&storage>format /system
Recovery>mounts&storage>format /preinstall (then go back)
Recovery>instal from sd card (external or internal, as you wish) and isntall Paranoid 2.9.9
>>>DONT REBOOT<<< at the end of aroma installer (uncheck the lil dot) then press finish (that will put you back in recovery)
back to recovery, go to advance again>fix permission
THEN,
Flash blusleep fix
flash Epinter's gapps (that will be FULLY compatible)
Let me know if you made it work
P.s.I had once, some issue with the playstore (i didnt wipe clean since 2.5.2) Force closing at the boot of the ROM and then, was unable to open at all !
If it happens on you, just go to system settings inside the rom>application>google playstore>erase Data>uninstall updates>reboot, it shoud do the trick
Plz, Hit the tanks button if i helped you
sathelate said:
had the exact same issue ! >>>follow those steps and you will have a 100% workin Paranoid<<<
1st : do you try coming from another ROM ? Did you wipe/Fresh, or you are actually updating ?
2nd : th3bill actually are working to make the option chooser smaller since it is too big for our atrix system partition
3rd : just go to paranoid thread and see what ive done if you absolutely want that option chooser to work (NOT RECOMMENDED as it cause issues)
Workaround that really works no problem : go to recovery now that you have a fully working paranoid 2.9.9 that dont have any gapps and flash without wiping everything (that will NOT erase your app.. Just the ROM)
Reboot into Recovery
THEN :
Recovery>wipe CACHE partition
Recovery>advance>wipe dalvik cache (then go back)
Recovery>mounts&storage>format /system
Recovery>mounts&storage>format /preinstall (then go back)
Recovery>instal from sd card (external or internal, as you wish) and isntall Paranoid 2.9.9
>>>DONT REBOOT<<< at the end of aroma installer (uncheck the lil dot) then press finish (that will put you back in recovery)
back to recovery, go to advance again>fix permission
THEN,
Flash blusleep fix
flash Epinter's gapps (that will be FULLY compatible)
Let me know if you made it work
P.s.I had once, some issue with the playstore (i didnt wipe clean since 2.5.2) Force closing at the boot of the ROM and then, was unable to open at all !
If it happens on you, just go to system settings inside the rom>application>google playstore>erase Data>uninstall updates>reboot, it shoud do the trick
Plz, Hit the tanks button if i helped you
Click to expand...
Click to collapse
Thanks sathelate for this tutorial.
I've tried a number of times to install this ROM without success. The last time my power button stopped working.
Do I need to run the Aroma prep before install?
bluegrass55 said:
Thanks sathelate for this tutorial.
I've tried a number of times to install this ROM without success. The last time my power button stopped working.
Do I need to run the Aroma prep before install?
Click to expand...
Click to collapse
nah, you need to flash aroma prep only once if you didn't switch recovery
Ouch :S is your power button ok ?! :S
Flash romracer recovery wich you can use capacituve button (menu:down,Home:up,Back:back,Search:enter) (is you change recovery, you will need to flash aroma prep back, then restart recovery before flashing
Let me know
It worked thanks for your tutorial, now I'm trying to run Netflix, you know off there is any setting to set, cause I open the app and close immediately, I'm not alter to even login or anything, just black screen and I get back to the menu, any clue on this?
Sent from my GT-I9100 using xda app-developers app
cherupop said:
It worked thanks for your tutorial, now I'm trying to run Netflix, you know off there is any setting to set, cause I open the app and close immediately, I'm not alter to even login or anything, just black screen and I get back to the menu, any clue on this?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
i think that root user cant use that app .. or at least JB users because i was having this problem since ive first flash paranoid :S (but i never tried before Cm10 Rom like on cm7/9)
I really want to make this to work, soo, let me know if you find anything on your side, and ill let you know on mine
I had the same problem, just installed gapps frontera Epinter and that's it. Check the post of the Paranoid ROM theres a user that post those gapps.
Hope you can solve it. I just did
Cheers!!!
Enviado desde mi Atrix 4G usando Tapatalk 2
sathelate said:
nah, you need to flash aroma prep only once if you didn't switch recovery
Ouch :S is your power button ok ?! :S
Flash romracer recovery wich you can use capacituve button (menu:down,Home:up,Back:back,Search:enter) (is you change recovery, you will need to flash aroma prep back, then restart recovery before flashing
Let me know
Click to expand...
Click to collapse
The power button behaviour has become very random and strange.
With the successful insatll of this rom I had to install "Button Remap apk" which set the search button to lock screen and longer press brings up the power button menu of reboot etc.
However with this rom the music player and the one I installed did not recognise a whole batch of a particular music file. So I went into recovery to restore a previous CM7 backup and hey presto the power button worked when selecting options. So I did the restore. The power button worked a couple of times then nothing. And the "Button Remap app" dosen't work in CM7.
I think the Aroma prep was the culprit.
Drowned phone, touch screen stopped working, does not react at all. Everything else works. Flashed Cyanogen 7, there when you first start, you should click on the android, but the sensor is not working! What to do? Variants patch was sewn through the CWM, which removes it it, but I can not ... Help please
AleksRushm said:
Drowned phone, touch screen stopped working, does not react at all. Everything else works. Flashed Cyanogen 7, there when you first start, you should click on the android, but the sensor is not working! What to do? Variants patch was sewn through the CWM, which removes it it, but I can not ... Help please
Click to expand...
Click to collapse
So, you want that Welcome screen to not come??
And if it is so, I can help but first of all tell me, can you go to recovery?
bhattbhargav60 said:
So, you want that Welcome screen to not come??
And if it is so, I can help but first of all tell me, can you go to recovery?
Click to expand...
Click to collapse
Yes, I want to when I turned the phone was immediately desktop. Yes recovery can go, have CWM.
AleksRushm said:
Yes, I want to when I turned the phone was immediately desktop. Yes recovery can go, have CWM.
Click to expand...
Click to collapse
So, then follow these steps:-
->Go to cwm.
->Install CM7 rom but no gapps.
->Wipe Data. Wipe dalvik-cache.
->Reboot phone. (There won't be any welcome screen)
->Now, if you need gapps, then just delete the 'Setupwizard.apk' from /system/app folder inside gapps zip file and then flash via cwm without any wipes.
Just a small tip:- Disable lockscreen by going to Settings > Cyanogenmod settings > Tablet tweaks. Check there Disbale lockscreen.
Otherwise, welcome screen issue will be fixed but without a working touch, you won't be able to unlock the device.
bhattbhargav60 said:
So, then follow these steps:-
->Go to cwm.
->Install CM7 rom but no gapps.
->Wipe Data. Wipe dalvik-cache.
->Reboot phone. (There won't be any welcome screen)
->Now, if you need gapps, then just delete the 'Setupwizard.apk' from /system/app folder inside gapps zip file and then flash via cwm without any wipes.
Just a small tip:- Disable lockscreen by going to Settings > Cyanogenmod settings > Tablet tweaks. Check there Disbale lockscreen.
Otherwise, welcome screen issue will be fixed but without a working touch, you won't be able to unlock the device.
Click to expand...
Click to collapse
Thank you very much! Everything works) But not the first time, but the second all super! Rescued, though
Hi,
I was running BeanStalk-4.4.270 03/18/14 by zymphad. Im not sure what the kernel was.
I tried flashing the ROM by ronasimi in this thread.
The ROM that i picked was cm-11-20140817-UNOFFICIAL-geeb & the kernel was gbx-kernel-lights-CM11.0-CAF.zip. Apart from this i picked the Google Stock package of PA GApps from here.
For flashing i did the following :-
1. backed up all my apps using TB from BeanStalk.
2. loaded the ROM, the kernel & GApps zip files into a folder on my sdcard.
3. rebooted into recovery(TWRP 2.6.xx), backed up my original ROM and lined up all the three flashable zips and flashed them. (The flash was successful)
4. Then i rebooted into system. But after reaching the home screen, i was getting errors "Unfortunately, the process com.android.systemui has stopped" & "Unfortunately, the process com.android.phone has stopped". I remembered it might be because i forgot to wipe dalvik & cache.
5. I again rebooted into recovery, wiped dalvik & system cache and tried booting into system. It was still giving the same issues.
6. I tried restoring my old ROM's backup. Surprisingly even that wouldn't solve the issue.
7. So i again flashed the CM11 ROMs. But this time, the boot process is getting stuck at the boot animation.
My Qs are as follows:-
1. Did i miss anything or do something that is not recommended (or maybe even dangerous)?
2. What should be my next step in resolving this issue?
Any help appreciated.
gautam_k said:
Hi,
I was running BeanStalk-4.4.270 03/18/14 by zymphad. Im not sure what the kernel was.
I tried flashing the ROM by ronasimi in this thread.
The ROM that i picked was cm-11-20140817-UNOFFICIAL-geeb & the kernel was gbx-kernel-lights-CM11.0-CAF.zip. Apart from this i picked the Google Stock package of PA GApps from here.
For flashing i did the following :-
1. backed up all my apps using TB from BeanStalk.
2. loaded the ROM, the kernel & GApps zip files into a folder on my sdcard.
3. rebooted into recovery(TWRP 2.6.xx), backed up my original ROM and lined up all the three flashable zips and flashed them. (The flash was successful)
4. Then i rebooted into system. But after reaching the home screen, i was getting errors "Unfortunately, the process com.android.systemui has stopped" & "Unfortunately, the process com.android.phone has stopped". I remembered it might be because i forgot to wipe dalvik & cache.
5. I again rebooted into recovery, wiped dalvik & system cache and tried booting into system. It was still giving the same issues.
6. I tried restoring my old ROM's backup. Surprisingly even that wouldn't solve the issue.
7. So i again flashed the CM11 ROMs. But this time, the boot process is getting stuck at the boot animation.
My Qs are as follows:-
1. Did i miss anything or do something that is not recommended (or maybe even dangerous)?
2. What should be my next step in resolving this issue?
Any help appreciated.
Click to expand...
Click to collapse
Flash TWRP 2.7.1 or Philz's touch CWM
than do a clean install
Wipe data and Format system
Flash any ROM (here CM 11 ) and Gapps
Flash proper kernel ( for CM 11 old Gprij-X kernel or neighborhood kernel)
Wipe cache and delvick cache
reboot profit
For more info :
ShoaibAhmed said:
Flash TWRP 2.7.1 or Philz's touch CWM
than do a clean install
Wipe data and Format system
Flash any ROM (here CM 11 ) and Gapps
Flash proper kernel ( for CM 11 old Gprij-X kernel or neighborhood kernel)
Wipe cache and delvick cache
reboot profit
For more info :
Click to expand...
Click to collapse
I tried flashing using TWRP but the flash failed. then I saw the video and thought of giving philz touch cwm a try. it worked like a charm. Thanks a lot for the help. For kernel I flashed gprojx-kernel-lights-CM11.0-CAF-20140414.zip. Everything seems to be working now. Only thing is that I can't seem to turn off NFC. Every time I deselect the check box, go somewhere else and come back, the NFC check box is already checked.
Any tips on that? It's eating up my battery
gautam_k said:
I tried flashing using TWRP but the flash failed. then I saw the video and thought of giving philz touch cwm a try. it worked like a charm. Thanks a lot for the help. For kernel I flashed gprojx-kernel-lights-CM11.0-CAF-20140414.zip. Everything seems to be working now. Only thing is that I can't seem to turn off NFC. Every time I deselect the check box, go somewhere else and come back, the NFC check box is already checked.
Any tips on that? It's eating up my battery
Click to expand...
Click to collapse
Reboot once and then try to turn off NFC , it will work.
ShoaibAhmed said:
Reboot once and then try to turn off NFC , it will work.
Click to expand...
Click to collapse
Awesome! Thanks a lot man.
One last Q p)- I spent almost 30mins combing through settings but I couldn't find a 3G/2G switch. Is it hidden somewhere or it doesn't exist yet in CM11?
gautam_k said:
Awesome! Thanks a lot man.
One last Q p)- I spent almost 30mins combing through settings but I couldn't find a 3G/2G switch. Is it hidden somewhere or it doesn't exist yet in CM11?
Click to expand...
Click to collapse
Settings--->Mobile networks--->Prefered network type--> change it from "LTE" to 2G/3G
ShoaibAhmed said:
Settings--->Mobile networks--->Prefered network type--> change it from "LTE" to 2G/3G
Click to expand...
Click to collapse
i am actually looking for a shortcut for the same in notification draweer or quick settings pulldown...apologies for not making it clear before.
gautam_k said:
i am actually looking for a shortcut for the same in notification draweer or quick settings pulldown...apologies for not making it clear before.
Click to expand...
Click to collapse
Found the shortcut in Settings> Notification Drawer> Quick settings panel> Tiles & layout> Network mode
For some reason i was thinking that this will lead me to the GSM/WCDMA switch.
Hi all,
I really tried to learn everything about rooting and flashing and custom ROM, and I am already busy all day, but I still can't get out of all the technological abracadabra, and other existing XDA topics I didn't know if they worked for me too, it would be very awful if I brick it because I didn't understand something small.
I may seem a bit lazy, but could someone please help me in not too technological language and provide me with the correct links to install?
So I have an i9100 second hand. The battery is empty really quick and gets very hot sometimes, and I read that this could be changed by installing custom firmware, like cyanogenmod.
I already have installed Siyah. My current version is Android 4.1.2.
I read things about installing custom recovery or something, but there are no important data on my phone yet, so I assume this is not applicable for me?
Can you install GApps after installing cyanogenmod? Except Google play, Maps and Youtube I don't need/want any other applications I think.
So can anybody provide me with a (customized) step plan what to do to install the best fitting version of cyanogen mod?
Thanks a lot in advance!
Joheee said:
Hi all,
I really tried to learn everything about rooting and flashing and custom ROM, and I am already busy all day, but I still can't get out of all the technological abracadabra, and other existing XDA topics I didn't know if they worked for me too, it would be very awful if I brick it because I didn't understand something small.
I may seem a bit lazy, but could someone please help me in not too technological language and provide me with the correct links to install?
So I have an i9100 second hand. The battery is empty really quick and gets very hot sometimes, and I read that this could be changed by installing custom firmware, like cyanogenmod.
I already have installed Siyah. My current version is Android 4.1.2.
I read things about installing custom recovery or something, but there are no important data on my phone yet, so I assume this is not applicable for me?
Can you install GApps after installing cyanogenmod? Except Google play, Maps and Youtube I don't need/want any other applications I think.
So can anybody provide me with a (customized) step plan what to do to install the best fitting version of cyanogen mod?
Thanks a lot in advance!
Click to expand...
Click to collapse
Hi there,
Siyah kernel already comes with custom recovery, however, it is out of date now and will not install kitkat roms. You will need to install a kitkat kernel first before installing the kitkat rom.
Yes, you can install gapps after installing cyanogenmod, have a look in the xda forums for modular gapp packages since you don't want some google bloat ware. However, the latest cyanogenmod 11 has a small system partition and will require you to install small gapp packages such as the 20140105 gapps. Search up gapps package on google and click the cyanogenmod link.
Now to install cyanogenmod (I chose cyanogenmod 11 m9 snapshot):
1. Download cyanogenmod 11 m9 snapshot .zip file (should be at cyanogenmod website)
2. Download modular gapps package, but I strongly recommend to install 20140105 gapps package by cyanogenmod
3. Download kitkat compatible kernel (I recommend downloading Pedestre's apolo kernel)
4. Put them all on your phone
Now reboot into recovery with this button combination, hold: (vol+, power, home)
5. Install .zip --> internal sd card (or sd card 0, or wherever you put the zips in) --> select kernel zip
6. Reboot your phone
7. You will notice your phone will not boot into rom, that's ok since it will automatically boot back into the new recovery
8. In the new recovery: press wipe/clear, and swipe the bar to do the factory reset and wipe caches
9. Install cyanogenmod zip
10. Install gapps zip
11. Reboot your phone
12. If your phone doesn't bootloop or crash, you're all good. Note: first boot will take a while, be patient!
gsstudios said:
Hi there,
Siyah kernel already comes with custom recovery, however, it is out of date now and will not install kitkat roms. You will need to install a kitkat kernel first before installing the kitkat rom.
Yes, you can install gapps after installing cyanogenmod, have a look in the xda forums for modular gapp packages since you don't want some google bloat ware. However, the latest cyanogenmod 11 has a small system partition and will require you to install small gapp packages such as the 20140105 gapps. Search up gapps package on google and click the cyanogenmod link.
Now to install cyanogenmod (I chose cyanogenmod 11 m9 snapshot):
1. Download cyanogenmod 11 m9 snapshot .zip file (should be at cyanogenmod website)
2. Download modular gapps package, but I strongly recommend to install 20140105 gapps package by cyanogenmod
3. Download kitkat compatible kernel (I recommend downloading Pedestre's apolo kernel)
4. Put them all on your phone
Now reboot into recovery with this button combination, hold: (vol+, power, home)
5. Install .zip --> internal sd card (or sd card 0, or wherever you put the zips in) --> select kernel zip
6. Reboot your phone
7. You will notice your phone will not boot into rom, that's ok since it will automatically boot back into the new recovery
8. In the new recovery: press wipe/clear, and swipe the bar to do the factory reset and wipe caches
9. Install cyanogenmod zip
10. Install gapps zip
11. Reboot your phone
12. If your phone doesn't bootloop or crash, you're all good. Note: first boot will take a while, be patient!
Click to expand...
Click to collapse
Many many thanks!
Only 2 questions; which pedestre apolo kernel do I have to download? There are a lot of version circulating it seems to me. And it doesn't matter that I already don't have a genuine kernel anymore?
And what do you mean with step 4? To me this step seems that I have to put CM, gapps and a new kernel in once (via reboot/download modus > Odin I guess?), but in later steps you say that I have to do those step by step.
Joheee said:
Many many thanks!
Only 2 questions; which pedestre apolo kernel do I have to download? There are a lot of version circulating it seems to me. And it doesn't matter that I already don't have a genuine kernel anymore?
And what do you mean with step 4? To me this step seems that I have to put CM, gapps and a new kernel in once (via reboot/download modus > Odin I guess?), but in later steps you say that I have to do those step by step.
Click to expand...
Click to collapse
Just follow This simple steps.
You are done
First download all the necessary zips(ROM,gapps, recovery) and copy them on your phone's external SD card and follow the procedure.
Sent from my Nexus 5 using Tapatalk 2
Joheee said:
Many many thanks!
Only 2 questions; which pedestre apolo kernel do I have to download? There are a lot of version circulating it seems to me. And it doesn't matter that I already don't have a genuine kernel anymore?
And what do you mean with step 4? To me this step seems that I have to put CM, gapps and a new kernel in once (via reboot/download modus > Odin I guess?), but in later steps you say that I have to do those step by step.
Click to expand...
Click to collapse
The apolo kernel you need to download is v7.1 for kitkat. It doesn't matter that you won't have the genuine kernel as it won't really affect your phone except improving battery life and performance.
What I meant with step 4 is to put the files onto your phone usng your computer (using windows explorer, like how you transfer files to other USB devices) while your phone is still on the operating system. After that (the following steps), you must install them in the particular order that I explained it in using your phones recovery software.
Hope this answers your questions, gsstudios
Hi, thanks for replying, but I am stuck on point 4/5
I finally found some time to work on it, so I downloaded the KitKat compatible kernel, the gapps and de CM 11m9.
They were in my download folder on the computer, and then I just copied those three .zip files to the internal memory.
Then I connected my phone to the computer with a USB cable, and I put the phone into recovery mode. But when I did that, the computer stopped to recognize the phone as an external disk, so I couldn't enter it anymore.
So what did I do wrong? (putting the files on my external SD didn't help either) And how do I install those zips, just unpack them if I solved the problem mentioned above?
K.r. Joheee
Joheee said:
Hi, thanks for replying, but I am stuck on point 4/5
I finally found some time to work on it, so I downloaded the KitKat compatible kernel, the gapps and de CM 11m9.
They were in my download folder on the computer, and then I just copied those three .zip files to the internal memory.
Then I connected my phone to the computer with a USB cable, and I put the phone into recovery mode. But when I did that, the computer stopped to recognize the phone as an external disk, so I couldn't enter it anymore.
So what did I do wrong? (putting the files on my external SD didn't help either) And how do I install those zips, just unpack them if I solved the problem mentioned above?
K.r. Joheee
Click to expand...
Click to collapse
Once you put everything on your internal storage you don't need your computer anymore.
In recovery you must tap on "install zip". Navigate to your location where you put everything.
First you install the kitkat kernel.
Afterwards you go back and tap on advanced, there you have to tap "reboot recovery"
You should see another recovery now.
Now you install your custom rom using "install zip", afterwards you install the gapps package.
When you are done with installing everything it's a good idea to wipe data and dalvik cache, in case you didn't do before.
At last you simply tap reboot.
Don't be afraid if booting takes more time than usual, it'll take longer the first time you boot.
Sent from my GT-I9100 using XDA Free mobile app
Muthzer the One said:
Once you put everything on your internal storage you don't need your computer anymore.
In recovery you must tap on "install zip". Navigate to your location where you put everything.
First you install the kitkat kernel.
Afterwards you go back and tap on advanced, there you have to tap "reboot recovery"
You should see another recovery now.
Now you install your custom rom using "install zip", afterwards you install the gapps package.
When you are done with installing everything it's a good idea to wipe data and dalvik cache, in case you didn't do before.
At last you simply tap reboot.
Don't be afraid if booting takes more time than usual, it'll take longer the first time you boot.
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
How long is long (for after the kitkat kernel reboot)? I have a black screen now for more than 2 hours after I hit 'reboot', and after 5 minutes I tried to put it on again with just hitting the power button for 2 seconds (I didn't read that it could take a while) but nothing changed.
It had 90% battery when I started. Because I was afraid it was running out of battery I plugged it to the power grid. My phone was and is warm, so I assume it was stil working on something.
Joheee said:
How long is long (for after the kitkat kernel reboot)? I have a black screen now for more than 2 hours after I hit 'reboot', and after 5 minutes I tried to put it on again with just hitting the power button for 2 seconds (I didn't read that it could take a while) but nothing changed.
It had 90% battery when I started. Because I was afraid it was running out of battery I plugged it to the power grid. My phone was and is warm, so I assume it was stil working on something.
Click to expand...
Click to collapse
Okay sry I should have specified myself when saying it takes a while.
That's Max 5 minutes. So your phone seems to be stuck in Boot loop.
Cause for this is either you didn't wipe everything before flashing - try wiping again and reboot, or you flashed the wrong file for your phone.
I'll make it easy, assuming your phone model is gt-i9100.
Go here :
http://galaxys2root.com/galaxy-s2-roms/cm11-android-4-4-3-for-galaxy-s2-gt-i9100sgh-i777/
Download cm11 and micro gapps from this site.
Afterwards download cwm kitkat compatible from here:
http://forum.xda-developers.com/galaxy-s2/general/cwm-kit-kat-compatible-t2546597
When you downloaded everything and put it onto internal storage go into recovery.
1. Wipe data and dalvik cache.
2. Install zip: cwm kitkat compatible
3. Reboot recovery in sections "advance"
4. Now you are in a new recovery again.
5. Install zip: cm11
6.install zip : micro gapps
7. Wipe data and dalvik
8. Reboot phone
Sent from my GT-I9100 using XDA Free mobile app
---------- Post added at 03:56 PM ---------- Previous post was at 03:44 PM ----------
Muthzer the One said:
Okay sry I should have specified myself when saying it takes a while.
That's Max 5 minutes. So your phone seems to be stuck in Boot loop.
Cause for this is either you didn't wipe everything before flashing - try wiping again and reboot, or you flashed the wrong file for your phone.
I'll make it easy, assuming your phone model is gt-i9100.
Go here :
http://galaxys2root.com/galaxy-s2-roms/cm11-android-4-4-3-for-galaxy-s2-gt-i9100sgh-i777/
Download cm11 and micro gapps from this site.
Afterwards download this :
https://docs.google.com/file/d/0B0jf4POLvWtTRHRGbzR4bFl1UlE/edit?usp=docslist_api
When you downloaded everything and put it onto internal storage go into recovery.
1. Wipe data and dalvik cache.
2. Install zip: cwm kitkat compatible
3. Reboot recovery in sections "advance"
4. Now you are in a new recovery again.
5. Install zip: cm11
6.install zip : micro gapps
7. Wipe data and dalvik
8. Reboot phone
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
Sec, my cwm download file is crap, I'll get another one
Edit:
I've changed the cwm kitkat link in my previous post
Sent from my GT-I9100 using XDA Free mobile app
Muthzer the One said:
Okay sry I should have specified myself when saying it takes a while.
That's Max 5 minutes. So your phone seems to be stuck in Boot loop.
Cause for this is either you didn't wipe everything before flashing - try wiping again and reboot, or you flashed the wrong file for your phone.
I'll make it easy, assuming your phone model is gt-i9100.
Go here :
http://galaxys2root.com/galaxy-s2-roms/cm11-android-4-4-3-for-galaxy-s2-gt-i9100sgh-i777/
Download cm11 and micro gapps from this site.
Afterwards download cwm kitkat compatible from here:
http://forum.xda-developers.com/galaxy-s2/general/cwm-kit-kat-compatible-t2546597
When you downloaded everything and put it onto internal storage go into recovery.
1. Wipe data and dalvik cache.
2. Install zip: cwm kitkat compatible
3. Reboot recovery in sections "advance"
4. Now you are in a new recovery again.
5. Install zip: cm11
6.install zip : micro gapps
7. Wipe data and dalvik
8. Reboot phone
Sent from my GT-I9100 using XDA Free mobile app
---------- Post added at 03:56 PM ---------- Previous post was at 03:44 PM ----------
Sec, my cwm download file is crap, I'll get another one
Edit:
I've changed the cwm kitkat link in my previous post
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
So I did the kitkat install after wiping all user data and dalvik cache (and accidentally the normal cache too).
I rebooted it via advanced > reboot recovery. It rebooted within 10 seconds.
Then I installed the zips (CM and Gapps. To be honest: I installed the gapps the first replyer to this thread mentioned: 20140105)
And I wiped all user data and dalvik cache.
Should I now do:
1: advanced > reboot recovery
or 2: reboot system now (on the first screen you see when you're in recovery)
And then it should start up until I see the screen with apps, time and those things I think?
Joheee said:
So I did the kitkat install after wiping all user data and dalvik cache (and accidentally the normal cache too).
I rebooted it via advanced > reboot recovery. It rebooted within 10 seconds.
Then I installed the zips (CM and Gapps).
And I wiped all user data and dalvik cache.
Should I now do:
1: advanced > reboot recovery
or 2: reboot system now (on the first screen you see when you're in recovery)
And then it should start up until I see the screen with apps, time and those things I think?
Click to expand...
Click to collapse
Reboot system
Yes it should start now
Sent from my GT-I9100 using XDA Free mobile app
Muthzer the One said:
Reboot system
Yes it should start now
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
Wow, thanks, it works! Thank you verrry much everyone!
This thread can be closed.
Joheee said:
Wow, thanks, it works! Thank you verrry much everyone!
This thread can be closed.
Click to expand...
Click to collapse
If you were successful i highly recommend to make a nandroid backup in recovery.
If you ever have problems booting your phone, you can restore this backup via recovery.
With titanium backup you can backup your apps and their data.
Sent from my GT-I9100 using XDA Free mobile app
Thanks for the advise, I was successful
every time I install lollipop, have same issue, my phone gets reboot after lock the screen, i try 4 different rom and the problem is persist,
1. full wipe
2. install rom, gapps, supersu
3. boot normally
4. sign in to google
5. lock the screen off
6. turn screen on
7. reboot
i have google for solution and get nothing
i'm sorry if i post to wrong section, seems it should be on help and troubleshoothing
eevoenc said:
every time I install lollipop, have same issue, my phone gets reboot after lock the screen, i try 4 different rom and the problem is persist,
1. full wipe
2. install rom, gapps, supersu
3. boot normally
4. sign in to google
5. lock the screen off
6. turn screen on
7. reboot
i have google for solution and get nothing
Click to expand...
Click to collapse
Try just installing the rom, no gapps and no supersu. Just wondering if its something to do with running out of memory/space. You could try repartitioning as well. I'm assuming you have no problems with kitkat roms?
noppy22 said:
Try just installing the rom, no gapps and no supersu. Just wondering if its something to do with running out of memory/space. You could try repartitioning as well. I'm assuming you have no problems with kitkat roms?
Click to expand...
Click to collapse
yes i did that, same issue, i have repartitioned my internal to 4,5gb/6,3gb
eevoenc said:
yes i did that, same issue, i have repartitioned my internal to 4,5gb/6,3gb
Click to expand...
Click to collapse
When you did this full wipe, did you also wipe the system partition?
gsstudios said:
When you did this full wipe, did you also wipe the system partition?
Click to expand...
Click to collapse
yes i did, wipe system, cache, data, dalvik, and android secure using twrp
also wipe internal storage too but still the same
same case here https://productforums.google.com/forum/m/#!topic/nexus/X6ZjAAauATc
but it happens on my sgs2 and there is no solution