Now devlopment of wave1 and 2 is almost complete.
My request to @Rebellos , @mijoma , @volk204 ,@ b.kubica , @adfree , @oleg_k , @Tigrouzen and others
plz plz look at the FOTA and bootloader of wave3 to make dual boot .
Hardware of S8600 is 100% same as I9001 Galaxy s plus.
I can speak only for me...
For S8600 research I have bought SECOND S8600...
So I have now 2 half damaged S8600... broken Display...
1.
I'm trying to increase my solder skills to be able to solder wires to S8600...
http://forum.xda-developers.com/showpost.php?p=48983648&postcount=123
2.
I am trying to make UART cable for S8600 and others...
http://forum.xda-developers.com/showthread.php?t=919569
I need resistors... all other parts I've bought.
3.
I am trying to find this f. file or similar content...
S8600_JTAG_120125.zip
http://forum.xda-developers.com/showpost.php?p=48771793&postcount=43
So question to you...
What exactly you have contribute meanwhile for S8600 support?
Thank you...
Best Regards
Hardware of S8600 is 100% same as I9001 Galaxy s plus.
Click to expand...
Click to collapse
Maybe usefull info...
Short checked RIFF Resurrector DLLs...
Now I will download Firmware for investigation...
Later more...
Best Regards
Edit 1.
Attempt downloading FW... I've found this...
I9001XXKQM-DBT-1TEIL.zip
Edit 2.
Meanwhile...
OPS file... looks nice...
Taken from AriesVE.ops
Code:
0,partition
1,dbl
2,osbl
3,amss
4,emmcboot
5,adsp
6,boot
7,system
8,cache
9,userdata
10,recovery
11,persist
12,preload
Edit 3.
Few files from TAR seems encrypted...
For instance:
boot.img
adfree said:
Maybe usefull info...
Short checked RIFF Resurrector DLLs...
Now I will download Firmware for investigation...
Later more...
Best Regards
Edit 1.
Attempt downloading FW... I've found this...
I9001XXKQM-DBT-1TEIL.zip
Edit 2.
Meanwhile...
OPS file... looks nice...
Taken from AriesVE.ops
Code:
0,partition
1,dbl
2,osbl
3,amss
4,emmcboot
5,adsp
6,boot
7,system
8,cache
9,userdata
10,recovery
11,persist
12,preload
Edit 3.
Few files from TAR seems encrypted...
For instance:
boot.img
Click to expand...
Click to collapse
Thank u so much for ur reply.
I m noob about all this devlopment .
if you can get adress 's for wave 3 we can make fota but fota must have security hole same as wave 1-2
Searching for JTAG dump of I9001... no luck yet...
Found this Video...
http://www.youtube.com/watch?v=yWo835XP8xg
Few addresses visible...
Oh, mabye found something for study...
i9001_Riff_unlocked_cm_JB 4.1.2 JZO54K ..bin
http://dfiles.eu/files/lhbxaidpn
Will try to download...
Best Regards
Edit 1.
Lost connection after 4000 MB ...
Short tested to compress... result is around 2500 MB...
Will try few Compression ratio...
Maybe someone is able to download full 7000 MB and tell us about compression... or better, someone saw Link to packed Version of I9001 dump...
I need more then 10 hours to download 7 GB +...
Maybe I will try 1 day again...
adfree said:
Searching for JTAG dump of I9001... no luck yet...
Found this Video...
http://www.youtube.com/watch?v=yWo835XP8xg
Few addresses visible...
Oh, mabye found something for study...
i9001_Riff_unlocked_cm_JB 4.1.2 JZO54K ..bin
http://dfiles.eu/files/lhbxaidpn
Will try to download...
Best Regards
Edit 1.
Lost connection after 4000 MB ...
Short tested to compress... result is around 2500 MB...
Will try few Compression ratio...
Maybe someone is able to download full 7000 MB and tell us about compression... or better, someone saw Link to packed Version of I9001 dump...
I need more then 10 hours to download 7 GB +...
Maybe I will try 1 day again...
Click to expand...
Click to collapse
Thanks , why other devlopers didn't helped or replied yet ?
1.
I have progress with my UART cable.
http://forum.xda-developers.com/showpost.php?p=49180986&postcount=18
But no luck with S8600...
2.
I have also tried to download again JTAG dump from other PC with faster Internet...
But more then 200 KB not possible...
So over 10 hours for Download...
Best Regards
No luck with S8600 and UART output...
No idea why...
Will try to investigate more...
I have only luck with 620 KOHM resistor, S8600 starts in Factory Production Mode...
blue green... but here also no UART output...
I have also no idea, why this is...
I can not find any changes in WinComm log nor UART...
Booting Log
Any ideas...
Maybe in Debug folder...
Best Regards
P.S.:
I need this file :angel:
S8600_JTAG_120125.zip
adfree said:
No luck with S8600 and UART output...
No idea why...
Will try to investigate more...
I have only luck with 620 KOHM resistor, S8600 starts in Factory Production Mode...
blue green... but here also no UART output...
I have also no idea, why this is...
I can not find any changes in WinComm log nor UART...
Booting Log
Any ideas...
Maybe in Debug folder...
Best Regards
P.S.:
I need this file :angel:
S8600_JTAG_120125.zip
Click to expand...
Click to collapse
i remember someting like you need to open uart output first )
you can with maybe play with bootloader
or make a test fota for open uart output
Long time ago mijoma gave me 1 test FOTA... for S8600
attached file is DEcrypted file, NOT ready for flashing via ML...
Thanx mijoma.
But I failed...
Before I have encrypted and added 1024 Bytes etc... blabla...
He wrote about osbl.bin...
S8600+XX+KJA bootloader
Click to expand...
Click to collapse
First I thought I am tooo stupid...
But I made few easier tests... also FAILED...
http://forum.xda-developers.com/showthread.php?p=42954130&highlight=s8600#post42954130
i remember someting like you need to open uart output first
Click to expand...
Click to collapse
Hmmm...
My cable and or soldered wires to UART work with:
Code:
[B]S8500
S8530
S8000 Jet
I9000[/B]
Soon I can test S5250
Tested self by me:
http://forum.xda-developers.com/showthread.php?t=919569
So why I should be too dumb to use it with S8600 ?
If I search in osbl.bin and 4000 MB JTAG dump or 1000 MB JTAG dump...
I can not find such text strings like:
LCD initialize Finished
Poweron status
Click to expand...
Click to collapse
Maybe Samsung removed/disabled text output...
This is the reason why I'm asking for this f. file content...
S8600_JTAG_120125.zip
Maybe here ELF files included or more/better documented files inside...
Who knows...
Alternate ways are here described...
http://forum.xda-developers.com/showthread.php?t=2116846&highlight=s8600
My problem is to solder tiny little wires to tiny tiny little little testpoints...
Otherwise I could try few more things, to understnad how f. S8600 work...
@ all
You are welcome to find solution, give usefull hints.
Best Regards
adfree said:
Long time ago mijoma gave me 1 test FOTA... for S8600
attached file is DEcrypted file, NOT ready for flashing via ML...
Thanx mijoma.
But I failed...
Before I have encrypted and added 1024 Bytes etc... blabla...
He wrote about osbl.bin...
First I thought I am tooo stupid...
But I made few easier tests... also FAILED...
http://forum.xda-developers.com/showthread.php?p=42954130&highlight=s8600#post42954130
Hmmm...
My cable and or soldered wires to UART work with:
Code:
[B]S8500
S8530
S8000 Jet
I9000[/B]
Soon I can test S5250
Tested self by me:
http://forum.xda-developers.com/showthread.php?t=919569
So why I should be too dumb to use it with S8600 ?
If I search in osbl.bin and 4000 MB JTAG dump or 1000 MB JTAG dump...
I can not find such text strings like:
Maybe Samsung removed/disabled text output...
This is the reason why I'm asking for this f. file content...
S8600_JTAG_120125.zip
Maybe here ELF files included or more/better documented files inside...
Who knows...
Alternate ways are here described...
http://forum.xda-developers.com/showthread.php?t=2116846&highlight=s8600
My problem is to solder tiny little wires to tiny tiny little little testpoints...
Otherwise I could try few more things, to understnad how f. S8600 work...
@ all
You are welcome to find solution, give usefull hints.
Best Regards
Click to expand...
Click to collapse
Thanks for ur all effort ,
S8600_JTAG_120125.zip is paid download in all sites
http://gsmfiledownload.com/download.aspx?get=17001
and i don't have credit card to buy it :crying:
http://gsmfiledownload.com/download.aspx?get=17001
http://www.dlgsm.com/index.php?dir=/FLASH-FILES/Samsung-Flashfiles/Samsung_Jtag_Program/S8600
Google search...
http://www.gsmindia.in/forum/gpgort/115448-s8600-file-needed.html
Can someone check please, if Download Link attached maybe?
Best Regards
adfree said:
http://gsmfiledownload.com/download.aspx?get=17001
http://www.dlgsm.com/index.php?dir=/FLASH-FILES/Samsung-Flashfiles/Samsung_Jtag_Program/S8600
Google search...
http://www.gsmindia.in/forum/gpgort/115448-s8600-file-needed.html
Can someone check please, if Download Link attached maybe?
Best Regards
Click to expand...
Click to collapse
gsmindia replied link also goes to gsmfiledownload .
no use.
Code:
[B]HOWTO__WAVE3_eMMC_EraseAndDown.ppt[/B]
[B]jsdcc.zip[/B]
jsdcc\bin
jsdcc\bsp
jsdcc\eMMCDown.cmm
jsdcc\eMMCDown_ERASE.cmm
jsdcc\eMMCEraseAndDown.cmm
jsdcc\eMMCEraseAndDown.cmm.bak
jsdcc\jnand_msg.h
jsdcc\jnand_printf.c
jsdcc\jsdcc.bin
jsdcc\jsdcc.elf
jsdcc\jsdcc.mak
jsdcc\jsdcc_addr_init.cmm
jsdcc\jsdcc_bsp.h
jsdcc\jsdcc_defines.h
jsdcc\jsdcc_hwio.cmm
jsdcc\jsdcc_id.c
jsdcc\jsdcc_imem_init.c
jsdcc\jsdcc_in.scl
jsdcc\jsdcc_main.c
jsdcc\jsdcc_msm.c
jsdcc\jsdcc_msm.h
jsdcc\jsdcc_param.c
jsdcc\jsdcc_param.cmm
jsdcc\jsdcc_param.h
jsdcc\jsdcc_start.s
jsdcc\mjsdload.cmm
jsdcc\partition_load_pt
jsdcc\bin\adsp.mbn
jsdcc\bin\amss.mbn
jsdcc\bin\apps.mbn
jsdcc\bin\appsboot.mbn
jsdcc\bin\dbl.mbn
jsdcc\bin\EBR0.bin
jsdcc\bin\emmc_lock_regions.xml
jsdcc\bin\emptysector.bin
jsdcc\bin\ENPRG7x30.hex
jsdcc\bin\fsbl.mbn
jsdcc\bin\MBR0.bin
jsdcc\bin\msp.py
jsdcc\bin\NPRG7x30.hex
jsdcc\bin\osbl.mbn
jsdcc\bin\partition.bin
jsdcc\bin\partition.mbn
jsdcc\bin\partition.xml
jsdcc\bin\partition0.bin
jsdcc\bin\patch0.xml
jsdcc\bin\ptool.py
jsdcc\bin\rawprogram0.xml
jsdcc\bsp\jinit.cmm
jsdcc\bsp\jinit_7600.cmm
jsdcc\bsp\jinit_7x30.cmm
jsdcc\bsp\jinit_8960.cmm
jsdcc\bsp\jsdcc_bsp.min
jsdcc\bsp\jsdcc_bsp_7x30.c
jsdcc\partition_load_pt\EBR0.bin
jsdcc\partition_load_pt\emmc_lock_regions.xml
jsdcc\partition_load_pt\emptysector.bin
jsdcc\partition_load_pt\flash_partition.xml
jsdcc\partition_load_pt\gen_script.c
jsdcc\partition_load_pt\gpt_partition.xml
jsdcc\partition_load_pt\loadpt.cmm
jsdcc\partition_load_pt\loadpt_parser.c
jsdcc\partition_load_pt\Makefile
jsdcc\partition_load_pt\MBR0.bin
jsdcc\partition_load_pt\mpp.pl
jsdcc\partition_load_pt\msp.exe
jsdcc\partition_load_pt\msp.py
jsdcc\partition_load_pt\msp_orig.exe
jsdcc\partition_load_pt\ms_program_card.c
jsdcc\partition_load_pt\ms_program_card.o
jsdcc\partition_load_pt\new_partition.xml
jsdcc\partition_load_pt\ParseBinaryPartitionFile.pl
jsdcc\partition_load_pt\parseGPT.pl
jsdcc\partition_load_pt\partition.bin
jsdcc\partition_load_pt\partition.xml
jsdcc\partition_load_pt\partition0.bin
jsdcc\partition_load_pt\PartitioningTool.py
jsdcc\partition_load_pt\partition_2p_example.xml
jsdcc\partition_load_pt\partition_example.xml
jsdcc\partition_load_pt\partition_extract_mbr.pl
jsdcc\partition_load_pt\patch0.xml
jsdcc\partition_load_pt\ptool.py
jsdcc\partition_load_pt\rawprogram0.xml
jsdcc\partition_load_pt\singleimage_partition.xml
jsdcc\partition_load_pt\singleimage_partition_7x27.xml
jsdcc\partition_load_pt\singleimage_partition_7x30.xml
This is inside S8600_JTAG_120125...
Big thanx AnycallMongolia :good:
Best Regards
Is this true?
Hey everybody !
Like I'm saying in the title, the Kernel for Wave 3 is ready !
But now we are trying to boot a android galaxy s2 custom rom on ...
Problems appear and we will correct it ...
I will next make a page whith all the information I get on !
Believe in !
Click to expand...
Click to collapse
Any further information?
Source: http://badadroid.fr.nf/
Thanx for info.
No idea.
I see something from february... but no details...
Best Regards
1.
This time I was able to download whole I9001 dump... 7 GB.
2.
Now I know modifying of S8600 Bootloader OSBL is possible.
See Screenshot.
At the moment the hard way...
Solderd wires ...
Used RIFF JTAG
READ 0 - 0x500000, modify some stupid text in OSBL...
OSBL starts at:
Code:
0x7D200
Tested with XXKI5 Bootloader, because it is not signed...
Will test with XXKI9...
Then later tests also with Retail stuff like XXKJC will follow...
Best Regards
Edit 1.
Second test with XXKJ1 or KJ9... not sure which one exactly, but taken from RIFF Ressurection package...
Modifying is possible.
Now I'm flashing XXKJC full... and try again.
If this is working, maybe I am able to create osbl.mbn file compatible for use in Multiloader...
It seems ""we"" have to concentrate on appsboot.mbn:
http://forum.xda-developers.com/showpost.php?p=51596851&postcount=67
Will check if I can find it from I9001 or dump or...
But I will continue.
Best Regards
Maybe someone can help me... to find correct files + settings for QPST eMMC App...
http://forum.xda-developers.com/showpost.php?p=51881668&postcount=73
Here is "PBL" dump inside... QHSUSB ...
Code:
\pbl\qhsusb\src\dci\qhsusb_dci.c
PBL_DownloaderVER1.0
Thanx in advance...
Best Regards
Edit 1.
Maybe usefull later...
http://forum.xda-developers.com/showpost.php?p=30121298&postcount=291
Related
I have the Cingular 3125 running WinMo 5. Can I install Linux on this phone? What non-Windows OS would run on this phone? Thanks.
I think this is possible. Qtek have is OMAP CPU.
KitSover said:
I think this is possible. Qtek have is OMAP CPU.
Click to expand...
Click to collapse
That would be great. Has anyone done it?
Can anyone suggest how I could do it?
Thanks
some linux projects like Xanadux ports on some htc families like typhoon , Hurricane and Tornado ( i.mate sp5 )
you can see , learn , and download all what you need in here .
who know ... maybe one of you guys can run linux on startrek
ceramic said:
some linux projects like Xanadux ports on some htc families like typhoon , Hurricane and Tornado ( i.mate sp5 )
you can see , learn , and download all what you need in here .
who know ... maybe one of you guys can run linux on startrek
Click to expand...
Click to collapse
That's a great link. Thanks.
If I can't get Linux running on the StarTrek myself, I will give my phone to one of the developers working on the Linux for phones project(s). I have 2 wall chargers, a car charger and a bunch of other accessories for my phone. The phone is like new.
Linwizard on StarTrek
See: http://vimeo.com/2114567
Beyond what's shown in the video, I was later able to get an interactive shell over USB and start X. I started working on some very, *very* rudimentary steps to support the phone's buttons, but I lost interest fairly quickly due to the limitations of working with the phone and my own inexperience with lower-level Linux stuff.
The patches I made for the keymaps are on GitHub.
If anyone else sees this thread and has the time/expertise to work on it some more, check out #htc-linux on irc.freenode.net.
Mounts ago i have tested android but was too slower for this device...
BHSPitMonkey said:
See: http://vimeo.com/2114567
Beyond what's shown in the video, I was later able to get an interactive shell over USB and start X. I started working on some very, *very* rudimentary steps to support the phone's buttons, but I lost interest fairly quickly due to the limitations of working with the phone and my own inexperience with lower-level Linux stuff.
The patches I made for the keymaps are on GitHub.
If anyone else sees this thread and has the time/expertise to work on it some more, check out #htc-linux on irc.freenode.net.
Click to expand...
Click to collapse
Hi man
what about phone services like bluetooth , radion , camera ....?
what can you use your device with linwizard ? 50% ?
what can i do for progress ?
where i must begin ?
MountainX said:
I have the Cingular 3125 running WinMo 5. Can I install Linux on this phone? What non-Windows OS would run on this phone? Thanks.
Click to expand...
Click to collapse
You can try android from the guys at wing-linux, heres my post on the tornado section, use the files i used on my tornado and android "should" boot up since the strtk has the same omap850 cpu, follow the instructions i provided, good luck.
heres my post
Note: the keys will be messup as theres no keyconfig for the startk.
Hi rafyvitto . i have some basic questions :
1. In download page I found some cabs for other devices ( like prophet , wizard .... ) . can you make a special cab for startrek ?
2. when this project would be in final release ?
sorry for my bad english
ceramic said:
Hi rafyvitto . i have some basic questions :
1. In download page I found some cabs for other devices ( like prophet , wizard .... ) . can you make a special cab for startrek ?
2. when this project would be in final release ?
sorry for my bad english
Click to expand...
Click to collapse
Go to my post and read the instructions...it says:
Files that need to be Downloaded:
wing-linux-0.4pre4.zip
After your done downloading this installed only these 2 cabs in your storage card:
1.wing-linux-0.4pre4-rootfs.cab
2.wing-linux-0.4pre4-excalibur.cab
Click to expand...
Click to collapse
Android and Startrek
I've been working with the awesome guys over at wing-linux for the past few days, and we now have a working configuration for the Startrek. Expect to see it in their source tree sometime this week.
I'll start a new thread in this forum with details soon, but at the moment all I can offer is this bit of enticement:
Hello everybody and regards to masters of HTC and clones. I'm from Chile, some days ago i bought a T4242+ from China, as many people here I was fooled too. Device is cool for the price, but i need to upgrade ROM to see if some features can improove general performance. I've searched a lot of forums, here and others and i haven't found solution, this is my situation:
1.- I have this Software:
WM 6.1 Professional
SO CE 5.2.20758 (Compilación 20758.1.4.1)
PDA versión : V03.06.00
PDA Construir : S0908051825(1.33)_BV
Stack Versión : V02.42
Stack Construir: May 16 2009 07:05:05
Radio Versión : 1.3
Radio Package : 2.2
2.- And this Hardware:
CPU Marvell PXA300
Rate 624 MHz
ROM 256MB
RAM 128MB
3.- Hard Reset buttons are:
Green+ Red + Power
No options screen pop's up, just do the Hard Reset at first button combination pressing.
4.- USB Mode Buttons
Volume Down + Power
White screen pops up with this message: "USB Update Mode!" (I don`t know what can i do from this screen)
5.- I don't know if i can flash my ROM with this specifications, neither if there is a spanish ROM to update. I've red a lot of flashing formulas and i'm a little confused , so i need someone to explain step by step (including some software i may need) what to do with this if i find the ROM.
Thank you so much, hope you can help me.
Jorge
PD: Sorry about my poor english, i swear i'll sharp it.
Unfortunately, there is no rom here that will work on your device...
Clones have a very different hardware, compared to the original phone.
You best shot is to dig in the chineese forum i found here, assuming you use google to translate, or understanding chineese, but there is little hope you will find a spanish rom there...
If you are courageous enough, you can try to cook yourself one based on the information you may gather there, but i don't think what you will find on xda is usefull for that, as the tools here are made with HTC in mind, and clones are like devices from other manufacturer (motorola, palm...), regarding the cooking of rom.
But don't try to flash a rom from here to your device, as it will most likely result in a bricking of your phone!
t4242+ ROM
Everything is working very well.
http://www.imprinthk.com/download/T4242+/T4242+_WM6.5_EN.zip <----English
http://www.imprinthk.com/download/T4242+/T4242+_WM6.5_SP.zip <----Spanish
http://www.imprinthk.com/download/T4242+/T4242+_WM6.5_IT.zip <----Italian? (I didnt download it.)
Edited: Links are down.
For 42424 (not +): http://rs121.rapidshare.com/files/350601133/T4242_WM6.5_Eng.zip
ranahan said:
t4242+ ROM
Everything is working very well.
http://www.imprinthk.com/download/T4...+_WM6.5_EN.zip <----English
http://www.imprinthk.com/download/T4...+_WM6.5_SP.zip <----Spanish? I didnt download it.
http://www.imprinthk.com/download/T4...+_WM6.5_IT.zip <----Italian?
Click to expand...
Click to collapse
Thank you my friend. Can you post the whole link please? This links are not found.
Thank you!
Hi ranahan,
For the english link there is no respond It says: page not found!
Could You please help me?
Thanks a lot
same for the spanish can someone please post the link for the spanish rom
t4242+ HTC Clon
Traukoman said:
Thank you my friend. Can you post the whole link please? This links are not found.
Thank you!
Click to expand...
Click to collapse
Hi, do anyone here know some software that works with HTC clon t4242 (marvell pxa300 processor) motion sensor?
I'm looking for some games but all tha games I tried doesn't work with the g-sensor....
thank's
Hi, i manage to extract the htcsensorsdk.dll from paiura's rom, which i learned that allowed to use htc g-sensor software on t4242+ and some other clone phones.
I tested on my phone and worked OK!
Now i can use my phone like mx-air (logitech mouse...)
Here the link to the file, for those that don't want to flash a new rom...
http://www.mediafire.com/?xb4z79oo66e9b4z
Thank's and good bye!
Hydis HVA37WV1
http://www.hydis.com/eng/03_product...=Mobile&openBox=0&subBox=null&openSubBox=null
DATASHEET :
https://rapidshare.com/files/4178364448/hva37wv1-m01_preliminary_product_spec__20110218.pdf
HOPE NOW WE HAVE ANDROID ON S8530!!!
Thanks, now I see that its IC display driver is
LG4573
http://www.trulydisplays.com/tft/driveric/Driver IC LG4573.pdf
not NT35510 like in Hydis panels in Galaxy series, so we must change some code.
Can you try to find NT35510 datasheet? It's not mandatory, but I would like to take a look into it also.
NT35510 Datasheet
Hi @Rebellos.
I think I found the
Sorry my bad English
rebellos said:
thanks, now i see that its ic display driver is
lg4573
http://www.trulydisplays.com/tft/driveric/driver ic lg4573.pdf
not nt35510 like in hydis panels in galaxy series, so we must change some code.
can you try to find nt35510 datasheet? It's not mandatory, but i would like to take a look into it also.
Click to expand...
Click to collapse
geme difficult job !!!
But find some thing !!
You can find kernel and driver on Huawei Ideos X5 U8800 mobile last version
http://pastebin.com/zQ6uAbm2
Kernel Source :
http://www.huaweidevice.com/worldwi...=toDownloadFile&flay=software&softid=Mzg2OTQ=
@Up:
This one I found already, but thx.
byercanx said:
Hi @Rebellos.
I think I found the
Sorry my bad English
Click to expand...
Click to collapse
Hey, thanks, but it isn't datasheet of NT35510, but only short schema of some LCD mounted with NT35510.
Maybe, the LCD of the Samsung I9003 (European version) is the same. The source code with drivers for it, it is here... h t t p s ://opensource.samsung.com/
There is various sources codes with drivers that if we mix it, we can install Android to the S8530.
Sorry for my english.
http://forum.xda-developers.com/showpost.php?p=18522481&postcount=41
Maybe usefull.
But at the moment I can't see this...
Need more details, then I could compare S8500 and S8530.
Best Regards
I've already got datasheet for LCD controller (thanks to Tigrouzen), that's all we need. Now I need some time to get straight with more important jobs and this will be done for sure.
There's Galaxy Nexus Dump but not kernel
porting android on s8530
hi, i'm not a dev but i think about something... Instead of porting a galaxy s rom, why not porting a nexus s rom? The nexus s has the same hardware as the wave 2 , the nexus s sold in europe have SCLCD screens like the wave 2 unlike they have 4".
Foxhynter said:
hi, i'm not a dev but i think about something... Instead of porting a galaxy s rom, why not porting a nexus s rom? The nexus s has the same hardware as the wave 2 , the nexus s sold in europe have SCLCD screens like the wave 2 unlike they have 4".
Click to expand...
Click to collapse
We are taking SCLCD driver from Nexus S, that it has got similiar panel, but different controller, so it still need alot of work on control sequences anyway.
please helpppp how to install android on samsung s8530?
hossamnasser said:
please helpppp how to install android on samsung s8530?
Click to expand...
Click to collapse
There is currently no way to get android on the s8530. Hence why this topic is here. Please use the search function before posting.
Posted from android on wave.
Someone is able to find S8600 related documents?
Or all in wait position...
Can someone search for more infos...
Google for instance.
How hard it is to integrate Display Driver?
Are changes "few Bytes" or few MB ?
No idea.
Bootloader contains Display Driver...
Maybe someone can please explain few parameters in ELF files... DDLC2 India INU Version have these additional Bootloader ELF files...
Now less differences in adresses... so maybe now more chance to identify some Display related...
Best Regards
How hard is it to integrate display driver?
All depends what's already done. In I9000->S8500 driver port it's actually matter of changing few lines to get LCD working (with initialization by SBL, haven't bypassed this yet)
Though for S8530 Oleg had to write it basing on driver for similiar lcd but for TI OMAP CPU. So it was bunchload of work, but it's done and working. So nothing's impossible, it's always matter of time and will or money (yea, one of the 2 last).
http://forum.xda-developers.com/showpost.php?p=24872058&postcount=159
Can someone please try and report?
Thanx.
Please caution. NOT tested!
Btw...
http://code.google.com/p/badadroid-kernel/source/detail?r=ba495cc7bae67794add1387e94a580bd35101f06
Thank you very much nbates66
Best Regards
There is progress to LCD Driver's? : Прохладно:
About Screenlock...
Someone knows M210S Display data?
Because on my S8500 M210S Firmware runs correct... I can see all and Screen awake after pressing Lock key...
Thanks, but it's unnecessary - difference is obvious - S8500 is waking up AMOLED screen based on TL2796 chip, for which we've got complete driver from I9000. S8530 is waking up SCLCD screen based on damned LG4573, and only reference driver we've got for it is some old omap phone. There's trouble with configuring the screen after putting it out of the reset, causing it not power on properly.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=39210275&postcount=1200
Best Regards
---------- Post added at 07:08 PM ---------- Previous post was at 06:23 PM ----------
This I can find in S8500 AND S8530 AND M210S Firmware + Boot... ELF...
Code:
LDI_TL2796
lcd/LDI_TL2796_Lismore.c
LDI_TL2796_Lismore.o
LDI_TL2796_Lismore.h
LCD_Driver.h
LDI_TL2796_Power_On
LDI_TL2796_Power_Off
I can not find "LG4573" as test String in Boot ELF nor in apps_compressed.bin...
For Wave 2 (S8530) Samsung used very smart this:
Code:
lcd/LDI_TL2796_[B]WAVE37[/B].h
Anyway...
Maybe deeper investigation in ELF files from INU... indian Firmware, because S8530 + S8500 ELF files available... for compare...
Now I will try to find these Chips... if visible in schematics or Pics...
Best Regards
JVLC2 TUR Both S8500 and S8530 also has ELF files
and BTW if you google "LDI_TL2796" this then you can find thishttp://pastebin.com/ux191gyQ
LDI_TL2796 : LDI_S6E63M0_Power_On [hwrev > S8200_UNIV_B7]
LDI_TL2796 : LDI_S6E63M0_Power_On [hwrev >= S8200_REV03]
Click to expand...
Click to collapse
Edit : Seems these strings from S8500 XXJB6
any progress
Any progress on the s8530 lockscreen wake up problem its the only thing that stopping us from using android on my wave 2, 24 X 7
Developers really appreciate all your work
Hello!
I have just make a simple Remote controll app for lg p500
This allow you to Remote controll your LG P500 from Windows over USB
so if someone want to try it or use it be my gest
Hope i can become usefull for someone
--------------------------------------------------------------------------------------------------
Verson 1.1
Manual installation
No shortcut
Have LG P500 usb driver
Verson 1.2
Automatic installation
Creates shortcut on dekstop
Uses driver from verson 1.1
Fixex "record future" Makes .mov file
Verson 1.3
Fixed smal installation thing
Fixed installation Directory
Removed .bat shortcut`s
i recomend to update to verson 1.3
---------------------------------------------------------------------------------------------------
Please give me feed about what you think about it : )
im also going to make a verson for mac os x if posibile and a verson that work With any andorid phone : )
Best Regards
OPJ
Smal fix
Putting up new download file v.1.1 for fix for smal problem. juse this new verson for getting it working.
Works very well (O1, Miks 6.5.7)
One thing I found: When clicking "Record" but then canceling the file selection window, the record button stays pressed. When clicking it again, you get a java.lang.NullPointerException
I can PM you the whole error, but I guess it's pretty easy to reproduce.
Wowwwww great program.Although lags and gives less fps,but a very good start.Am impressed.
seems to be an interesting 1
vansens: hmm, strange.. it is working fine on 5 computers for me.
What is Your java verson?
Are you running Windows xp/Windows 7?
To All :
Tanks for the feedback
---
OPJ
Update to 1.2
The program is now updated to verson 1.2
Read the first thread for info and download
---
OPJ
It's working great for me! Nice job!!
I'm wondering if u can add a function that will either turn the screen orientation based on the accelerometer or by adding a button that will change it?
spellspark said:
It's working great for me! Nice job!!
I'm wondering if u can add a function that will either turn the screen orientation based on the accelerometer or by adding a button that will change it?
Click to expand...
Click to collapse
hi,
dosent Your screen turn ? mine dos :S but if you right click in the Remote session the Picture shuld tur : )
it is verson 1.2 you have tried?
was the installation going well?
---
OPJ
olepj1992 said:
hi,
dosent Your screen turn ? mine dos :S but if you right click in the Remote session the Picture shuld tur : )
it is verson 1.2 you have tried?
was the installation going well?
---
OPJ
Click to expand...
Click to collapse
You didn't provide any readme/help file in the zip ( ), so I didn't know about right clicking... It works Video recording works
This could be very useful for someone who makes an app and wants to show it off on YT or some other video hosting provider... or make tutorials on how to use/flash sth
spellspark said:
You didn't provide any readme/help file in the zip ( ), so I didn't know about right clicking... It works Video recording works
This could be very useful for someone who makes an app and wants to show it off on YT or some other video hosting provider...
Click to expand...
Click to collapse
Good : ) sorry, im going to make a readmr/help file to Morrow : )
thanks gor trying it out : )
im happy for tips to get it smuuder : )
Found a bug?? Not sure... I get a popup with an "ArrayIndexOutOfBoundsException: Coordinate out of bounds!" error when I right click when in portrait/landscape position to change the orientation... What I mean is I get the error when I don't turn the phone to another position (I stay on the original one) and then right click... Also, the remote client freezes on the last frame before the error (it keeps displaying the last frame after closing the error window). The weird part is u can still control the phone by clicking inside the client...
Full string of the error:
java.lang.ArrayIndexOutOfBoundsException: Coordinate out of bounds!
at sun.awt.image.IntegerInterleavedRaster.setDataElements(Unknown Source)
at java.awt.image.BufferedImage.setRGB(Unknown Source)
at net.srcz.android.screencast.api.injector.ScreenCaptureThread.display(ScreenCaptureThread.java:145)
at net.srcz.android.screencast.api.injector.ScreenCaptureThread.fetchImage(ScreenCaptureThread.java:106)
at net.srcz.android.screencast.api.injector.ScreenCaptureThread.run(ScreenCaptureThread.java:51)
Click to expand...
Click to collapse
spellspark said:
You didn't provide any readme/help file in the zip ( ), so I didn't know about right clicking... It works Video recording works
This could be very useful for someone who makes an app and wants to show it off on YT or some other video hosting provider... or make tutorials on how to use/flash sth
Click to expand...
Click to collapse
Yepp good thinking : )
i did make it do use for making video torurials on our andorid Devices were i work, and i think many other users can use it too : )
i will try yo get rid of the lagg but i do think it laggs becouse the Communication is over usb
tnx for all good feedback, its make my day
spellspark said:
Found a bug?? Not sure... I get a popup with an "ArrayIndexOutOfBoundsException: Coordinate out of bounds!" error when I right click when in portrait/landscape position to change the orientation... What I mean is I get the error when I don't turn the phone to another position (I stay on the original one) and then right click... Also, the remote client freezes on the last frame before the error (it keeps displaying the last frame after closing the error window). The weird part is u can still control the phone by clicking inside the client...
Full string of the error:
Click to expand...
Click to collapse
hmm strange, im going to try to reproduce the error tomorrow and try to fix it
tnx for the report
Update v 1.3
Se the first post for info and download : )
Mac version is maybe ready to morrow .
What do you want?
Hi,
Do you want more out off this software?
or are the enything you want different?
do you think this software is usefull?
if so please contact me,
And please give me feedback.
Best Reguards
OPJ
This software`s maker : )
http://forum.xda-developers.com/tags.php?tag=mpe
does a similar thing. it's great to get off the screen-keyboard, back to the real thing ...
this is a copy of screencast, isn't it?
Greets!
Delete post
Any way to change installation folder? There is no 'Change...' button as of now and the folder path is greyed out.
Hello guys i have managed to get iGO primo 2.0 or v9.6.7.2(something like that) on P500. I have installed it and it works superb, the only problem is that the resolution file which is a sys.txt is not properly optimised for our phone it is just a millimeter off it is 455X320 instead of 480x320.
Can someone help me optimize it and share it with you guys? I guess everyone is interested in upgrading to iGO primo 2.0 which i can tell you from 5 min of play with it that is way way better and more fun HA.
can you pm me, where did you get that? i've found a version, which starts to load, but after it displays basemap, and closes, like an fc, without warning.
ok so i got it working, i found a sys.txt for 320x480 and it works great the only problem is that i can't post here any file cause i gusess that is against forum rules and illegal... any suggestions ?
gafaysto said:
ok so i got it working, i found a sys.txt for 320x480 and it works great the only problem is that i can't post here any file cause i gusess that is against forum rules and illegal... any suggestions ?
Click to expand...
Click to collapse
I sent you pm
pm from me also
gafaysto said:
ok so i got it working, i found a sys.txt for 320x480 and it works great the only problem is that i can't post here any file cause i gusess that is against forum rules and illegal... any suggestions ?
Click to expand...
Click to collapse
I think it's not illegal as it is modified by u to work on p500.
Upload it to a sharing site and post the link.Give full credit to original owners and those who deserve it.
Post it in Apps and themes section :good:
Sent from my LG-P500 running Ginger Snap
plz upload the sys.txt here, i foud something and i will test it in a few seconds..
http://amtelefon.com/en/download-ig...hd-mini-windows-mobile/mobile-apps/#more-3353
the rezolution is the same..
Modding tools
Hello guys,
I've attached the tools necessary for modding iGO Amigo.
There are already working mods for HVGA resolution, but they aren't the best (e.g. text being displayed on top of each other, bad icon crop, etc). Otherwise these versions do work but they just aren't that good as the previous iGO 8 was for HVGA.
One thing is for sure: you have to get the iGOprimo_v9.6.7.235654_thin-v1.0.apk for our resolution (other version will hang with error message).
The files we can edit to make it smooth for our resolution are:
- sys.txt
- data.zip
-- uiandroid
--- multimode.ini
--- 800_480 --> contains encrypted bmp files which can be decrypted (and vice versa) with the enclosed tool.
Good luck!
iGO primo just from the phone
hello,
is there a way to make iGo primo to run ONLY from the phone?
to be precise. i need acces to my SD card in order to play music stored on the phones' SD card in my cars' stereo.
so i connect my phone to my stereo (phone is set as disk drive) so the SD card is unmounted from the android.
this means that iGo cannot access the maps and content from the SD card.
is there a way to move the content on my phone (i can create a sd-ext of 2 gb - enough for 3-4 maps i use)?
is there a way to alter sys.txt in order not to search for content on my SD card?
thanks.
D.
@gafaysto I sent you a PM.
thatnextdoorboy said:
pm from me also
Click to expand...
Click to collapse
Can you send me it, too?
I have the same problem as described in first page: iGO Primo closes after loading bar goes to 70%. I tried
iGOprimo_v9.6.7.235654_thin-v1.0.apk
iGO_Primo_thin-v11_custom-v10.apk
and
iGOprimo_v9.6.7.235654_thin-v1.2.apk
I have the same problem with all apk's
I have ROM cm-7-20121125-NIGHTLY-p500.zip which is working great.
How you solve that problem with iGO Primo.
Send me pls a PM with a working version if you have one.
Thanks
Later edit: - I managed to combine some files from different versions and now i have a working version for my optimus one. I uploaded the basic files and apk here if someone needs them. I think this link will expire after 30 days.