[Q] Neat ROM Latest and Bluetooth Comms Problems - Galaxy S II Q&A, Help & Troubleshooting

Hi, recently ive updated to the very latest version of NEAT ROM, very good at that. Found WiFi Comms is more reliable and faster, just a bit.
I use an app called "Torque Pro" for diagnostics via Bluetooth on my Galaxy Sii i9100 (United Kingdom)
When I used to use the Lite version of NEAT ROM and a previous version the app worked great, but now with the new version of NEAT ROM im having issues talking/communicating with ECU`s on the car. I know the bluetooth dongle that plugs into the ECU Port on the car is working and communicating with the phone, but the communication link that is being esablished via particular car protocols being sent from the app via the dongle to the ECU dont work anymore.
This sounds like an APP problem, but its definitely not, and the dongle works when using it on another friend of mines Galaxy S2.
This is my configuration of my phone, can someone tell me if there is any problems with it:
Model Number : GT-i9100
Android Version: 4.1.2
Baseband: i9100XXMS4
Kernel Version:
3.0.31-1484249
[email protected] #3
SMP PREEMPT Tue Dec 3 20:24:29
KST 2013
Build Number:
XWMS2 NeatROM V5.6
Have i got the corret Modem, Kernel, Baseband?
Phone is fully connected to O2 UK, I also know the Kernel that was flashed is insecure too which i would like to change for a secure one and still be rooted.
Thanks for any help on this, its much appreciated.

Related

[Q] Whether to ROM?

Hi...
I recently got myself one of these bad boys:
Model Number: YP-G70CB/SSA
Firmware version: 2.2.2
Kernel version: 2.6.32.9 [email protected] #1
Build number: FROYO.XXKF1
- It does have the mechanical Home Key - purchased in South Africa.
I'd like to upgrade it to GB or higher Kies just tells me my device is not upgradable??!! Why would that be?
Anyway I have read solidly for two days on this forum and I am inclined to attempt the following ROM: International 5.0 (Rest of World) Eryiğit Custom Rom Default Release 3.0
I just don't know enough whether it's compatible or that it would work or brick?
One thing I really would like out of it which it hasn't at the moment, is to have an ad-Hoc hotspot running on it for others to connect to a small web server... is that possible with the ROM above or am I going to have to wait or try something else?
Any advice much appreciated - Shot dot Com...
See above
Sigh...

Back to repair - battery blinking - camera not working

Hi everyone,
after getting my phone from repair (battery was blinking). I have successfully rooted my phone with CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5 and discovered the INSANE CHIP and SW:
Vers: 4.0.4
baseband: I9100BULP8
Kernel version 3.0.15-I9100XXLPQ-CL223505 [email protected] #3 SMP PREEMPT Fri Mar 9 02:19:25 KST 2012
Build: IMM76D.BULPG
As the device was upgraded to that version, I cannot send it rooted to repairs again because the camera doesn`t work. So and because f the Insane chip a cannot upgrade it to 4.0.4. What to do? Any ideas?
Thanks
pkmacola said:
Hi everyone,
after getting my phone from repair (battery was blinking). I have successfully rooted my phone with CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5 and discovered the INSANE CHIP and SW:
Vers: 4.0.4
baseband: I9100BULP8
Kernel version 3.0.15-I9100XXLPQ-CL223505 [email protected] #3 SMP PREEMPT Fri Mar 9 02:19:25 KST 2012
Build: IMM76D.BULPG
As the device was upgraded to that version, I cannot send it rooted to repairs again because the camera doesn`t work. So and because f the Insane chip a cannot upgrade it to 4.0.4. What to do? Any ideas?
Thanks
Click to expand...
Click to collapse
Well the first of all, try flashing a different kernel, I've experienced the camera problem before, but after flashing Siyah kernel the problem was fixed for me, you can also try any other kernel and see what works for you. If it doesn't work, let me know and we can try other ways of fixing the problem.
I did what you sugested, but because of the INSANE chip i really don`t want to mess around a lot. So I flashed Siyah kernel and the SII doesn`t start up, but i can still come to Volume Up or Volume Down screen. All I know, that I cannot flash with original rom 4.0.4 because than will destroy the phone - wipe everything of it.
will that do the trick? LINK searching for XXLPQ
iflashed with original kernel, and the S2 woke up, but the problem still exists.
How can i find the same rom on sammobile? I did searched my operator but it is not listed there. I listed also the french ones and spanish ones and none of them is the same as mine.
pkmacola said:
iflashed with original kernel, and the S2 woke up, but the problem still exists.
How can i find the same rom on sammobile? I did searched my operator but it is not listed there. I listed also the french ones and spanish ones and none of them is the same as mine.
Click to expand...
Click to collapse
If muppets like you want help include your country/or the original software version that came with the phone/the carrier you use etc.How can you expect anyone to link you up with software when you post what your on now.
Samsung can quite easily knock back your warranty if they find a rom that is not meant for the phone your sending them.They can look for signs of tinkering etc.
theunderling said:
If muppets like you want help include your country/or the original software version that came with the phone/the carrier you use etc.How can you expect anyone to link you up with software when you post what your on now.
Samsung can quite easily knock back your warranty if they find a rom that is not meant for the phone your sending them.They can look for signs of tinkering etc.
Click to expand...
Click to collapse
As I wrote in the first post
Vers: 4.0.4
baseband: I9100BULP8
Kernel version 3.0.15-I9100XXLPQ-CL223505 [email protected] #3 SMP PREEMPT Fri Mar 9 02:19:25 KST 2012
Build: IMM76D.BULPG
and I don`t find that specific one for my country.
COUNTRY: Slovenia
CARRIER: Vodafon (Si.mobil)
Before i have send it to warranty repair of usb connector, it had 4.0.3 (I9100BULPG_I9100SIMLP6_SIM) as it was updated via Kies. So it was updated at service, with something I cannot find.
If any more information is needed, PLEASE write it down, I will look after.
Thank you
pkmacola said:
Hi everyone,
after getting my phone from repair (battery was blinking). I have successfully rooted my phone with CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5 and discovered the INSANE CHIP and SW:
Vers: 4.0.4
baseband: I9100BULP8
Kernel version 3.0.15-I9100XXLPQ-CL223505 [email protected] #3 SMP PREEMPT Fri Mar 9 02:19:25 KST 2012
Build: IMM76D.BULPG
As the device was upgraded to that version, I cannot send it rooted to repairs again because the camera doesn`t work. So and because f the Insane chip a cannot upgrade it to 4.0.4. What to do? Any ideas?
Thanks
Click to expand...
Click to collapse
Ok, you know what, just flash stock firmware...anyone will do. Then root your device and install triangle away, wipe your binary counter and the re-flash stock firmware and delete any root files/apps you might have. That deletes all evidence that you might have rooted your device and then send it for repairs. If you don't want to, just hard brick it and they will replace it for you, providing you still have warranty?

Mute Calls on Galaxy S III (I9300)

Hi,
I have a very weird problem on my Galaxy S3.
I bought my phone out of my country. It came with a ROM of Optus (brand of Australia).
I have changed the ROM by one ZTO (no brand) of Brazil.
Since before the change of the ROM, I saw a problem on this phone: the mute calls.
I had done everything, I don't know how solve. What was done:
- Changed the ROM to the original;
- Changed the MODEM for many others from Brazil, Australia, and other countries;
- Changed the ROM to a custom ROM (CyanogenMod, etc.);
- Changed the Kernel to many others, as Siyah, etc.);
Important Info:
- Skype and Viber calls works 100%;
- Videos have sound normally;
- 3G connection (Browser, Facebook, WhatsApp) works 100%;
- I receive and make calls, but without hearing and without being heard;
- If I open the link for the virtual keyboard and type in one of the numbers on the keyboard, it makes a noise keyboard, both for me as for the other people in line.
Current info of my phone:
Model: I9300
Android Version: 4.1.2
Baseband Version: I9300UBELL1
Kernel Version: 3.0.31-Siyah-1.8.9+ [email protected] #7 SMP PREEMPT Tue Jan 15 07:39:27 PST 2013
Compilation Number: JZO54K.I9300UBEMA1
Sorry for my poor english, I'm from Brazil.
Thanks!

[Q] Samsung GS2 WiFi problem

Dear friends
I got a WiFi problem since few days,, My phone can not detect WiFi, it will give the message (WiFi turning on ) then no WiFi connected.
I changed the ROM twice but it showed the same problem again.
my other devices can detect the WiFi easily ( It is not a network problem).
My phone is GS2 I9100 GT,, Android 4.1.2
Baseband I9100XXMS2
Kernel 3.0.31- 1069234 [email protected] #3 SMP PREEMPT
Build XWLSN V4.0
Turkbey Rom V4.0 S4 Edition
I appreciate any help
Thank you
Does your phone get hot when you turn on Wi-Fi?
Your Wi-Fi turns on? Or stay in an intermediate state?
Sent from my GT-I9100 using Tapatalk 2
Check this BAT500 and other Wifi related failures:
http://forum.xda-developers.com/showthread.php?t=1935338
http://forum.xda-developers.com/showthread.php?t=2299615
http://forum.xda-developers.com/showthread.php?t=2342139
smd0806 said:
Check this BAT500 and other Wifi related failures:
http://forum.xda-developers.com/showthread.php?t=1935338
http://forum.xda-developers.com/showthread.php?t=2299615
http://forum.xda-developers.com/showthread.php?t=2342139
Click to expand...
Click to collapse
I had flashed the official ICS
I9100XWLSW Download (Thanks To SamMobile!)
Base Firmware: I9100XWLSW (4.1.2)
Region: Europe
Country United Kingdom
Carrier: Unbranded
Build Date: 15 May 2013
Modem: XXMS2
CSC: XEULS5
Change List: 1211311
I need to install official Modem to overcome this problem,, so, what modem i will choose ? and from where can i download it?

[Q] Phone will not register on mobile network

Hi!
So my S2 wont register on network anymore, It sometimes find a network but only if i have ROAMING enabled but it still not help.
the phone works fine on Wireless n such but not with a SIM-Card in it.
I have done these steps so bare with me:
Fully updated my Android versions
Restore to fabricated settings
Tried the APN settings, No luck
Tried the SIM in other phones, Work flawless.
Now my last hope is that maybe the problem lies in the phone's room, or something in that direction.
Btw this is a phone that has been sold and bought here in Norway but after a friend took it to thailand and got back from there the phone has'nt been working as intended.
Any thoughts?
Relevant Information:
Model: GT-I9100
Android: 4.1.2
Band; I9100XXMS2
Kernel: 3.0.11-1156082, [email protected]#3 SMP PREEMPT Mon Apr 22 16:13:38 KST 2013
Try different modems
http://forum.xda-developers.com/showthread.php?t=1881304

Categories

Resources