hi all
i have samsung s7562 mtk6572
the problem when i press # after three number or above disappear all the numbers i pressed in the dial pad
for example:
press *22# its ok
press *222# not ok disappear all the numbers i pressed in the dial pad
press *22222# olso not ok disappear all the numbers i pressed in the dial pad
that mean phone canot do any ussd or code
which file can cause this problem in system?????
my phone full root access and installed root explore
this info for mtk driod tool
Hardware : MT6572
Model : GT-S7562
Build number : IMM761.S7562ZCALK2
Build date UTC : 20131203-081739
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1, 2013/07/09 18:02
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Tue Dec 3 16:15:01 CST 2013
sorry for my bad english
Related
Hello guys.
I have problem in my phone's IMEI. It is no IMEI, I try to set but he arrow. I am not able to route it. I tried several ways:MTK Droid Root & Tools, eroot, with the process that uses the file run.bat.
Any soul could give me an idea?
Below device data according to MTK Droid Root & Tools:
Hardware : MT6589
Model : GT-I9500
Build number : JDQ39.I9500XXUAMDE
Build date UTC : 20130827-150744
Android v : 4.2.2
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Tue Aug 27 23:05:47 CST 2013
Thank you very much!
jjbairros said:
Hello guys.
I have problem in my phone's IMEI. It is no IMEI, I try to set but he arrow. I am not able to route it. I tried several ways:MTK Droid Root & Tools, eroot, with the process that uses the file run.bat.
Any soul could give me an idea?
Below device data according to MTK Droid Root & Tools:
Hardware : MT6589
Model : GT-I9500
Build number : JDQ39.I9500XXUAMDE
Build date UTC : 20130827-150744
Android v : 4.2.2
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Tue Aug 27 23:05:47 CST 2013
Thank you very much!
Click to expand...
Click to collapse
1. Open phone dialer
2. Dial *#*#3646633#*#*
3. It will launch engineer mode
4.Under Connectivity Tab select CDS Information
5.Now select Radio Information
6. Select Phone 1
7.Type AT+EGMR=1,7,"ENTER YOUR IMEI HERE"
8.Click send AT command
9. Repeat this procedure and this time selec Phone 2
10. Type AT+EGMR=1,10,"ENTER 2nd IMEI NUMBER HERE"
11. Reboot phone
There you go
FOLLOW STEPS PROPERLY AND SLOWLY
Hit THANKS if problem is solved
Hi ! I have a problem with my phone (mt6572 clone s4 , 1:1)
Touch screen don't work after flash phone with this rom : www.mediafire.com/download/nsi0tb9rqznabg9/I7628.H31B.02.05.A.B-V07.0-1114.rar
Specs of my phone :
Hardware: MT6572
Model: GT-I9500
Build number: ALPS.JB3.MP.V1
Build date UTC: 20130920-102559
Android v : 4.2.2
Baseband v. : MOLY.WRB.W13.15.MD.WG.MP.V1.P1,2013/09/04 00.01
Kernel v. :3.4.5 ([email protected]) (gcc version 4.6.x-google 20120105 (prerelease) (GCC) #1 SMP Fri Nov 15 11:34:07 CST 2013
Uboot build v. :----- should be root shell
LCD Driver IC :----- should be root shell
IMEI 1 : 356845051159182
IMEI 2 : 356845051159182
When started the device, screen is up button home is volume "+", buton "+" don't work, buton "-" and "power" work , Baterry don't charge.
Touch screen don't work.
Plssss help me ! Sorry for my bad english.
phone info
Hardware : MT6575
Model : iPhone5
Build number : ALPS.GB2.MP.V2.42
Build date UTC : 20130428-094756
Android v : 2.3.6
Baseband v: MAUI.11AMD.W11.50.SP.V51, 2013/04/13 12:08
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Sun Apr 28 17:45:11 CST 2013
Uboot build v : MAIN2.2.ubt.3611
LCD Driver IC : 1-nt35510
+ i need test point ... my phone is dead after flash no recovrey mode no power no meta mode
sorry for my bad english
photos
Hi all,
i buy this phone and after 2-3 days i make root and then i update recovery CWM with mobileuncle mtk tools.
when i restart the phone the recovery don't start, so i start the phone normally but the touchscreen have this problem
h t t p s : / / mega.co.nz/#!0BtVkDjC!YAylaA2R3wjPPctHa_sEQ1WJYoQ_5tDmuUnEOzvj6Ko
after that i change a lot of firmware and rom but the problem remain...
this is the original information of the phone:
Hardware : MT6589T
Model : N3
Build number : N3_V1.0_V01_2014-03-01_15:58:03
Build date UTC : 20140301-075837
Android v : 4.3.0
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V7.P11, 2013/05/28 20:28
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Sat Mar 1 15:56:02 CST 2014
Uboot build v : -----
LCD Driver IC : 1-otm1283a_dsi_lcm_drv
someone can help me?
Hardware : UNIVERSAL5420(exynos5)
Model : SM-G900
Build number : KOT49H.G900SKSU1ANCE
Build date UTC : 20140509-100400
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V15, 2014/02/18 02:04
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Fri May 9 18:01:40 CST 2014
Uboot build v : -----
LCD Driver IC : 1-otm1283a_hd720_dsi
I lost IMEI n network service (cannot detect network showed FORBIDDEN ) after cwm format
Anyone can help me? SO FRUSTRATED....:crying::crying::crying:
xqloevera said:
Hardware : UNIVERSAL5420(exynos5)
Model : SM-G900
Build number : KOT49H.G900SKSU1ANCE
Build date UTC : 20140509-100400
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V15, 2014/02/18 02:04
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Fri May 9 18:01:40 CST 2014
Uboot build v : -----
LCD Driver IC : 1-otm1283a_hd720_dsi
I lost IMEI n network service (cannot detect network showed FORBIDDEN ) after cwm format
Anyone can help me? SO FRUSTRATED....:crying::crying::crying:
Click to expand...
Click to collapse
Hi bro.i have a phone galaxy s5 clone,too.but i lost this rom and now my device was die ( .can you back up this rom and share me ? TKs you so much.i need help !
Same prolem here...
Does anyone have recovery image for this phone?
I can't connect it to pc...
xqloevera said:
Hardware : UNIVERSAL5420(exynos5)
Model : SM-G900
Build number : KOT49H.G900SKSU1ANCE
Build date UTC : 20140509-100400
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V15, 2014/02/18 02:04
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Fri May 9 18:01:40 CST 2014
Uboot build v : -----
LCD Driver IC : 1-otm1283a_hd720_dsi
I lost IMEI n network service (cannot detect network showed FORBIDDEN ) after cwm format
Anyone can help me? SO FRUSTRATED....:crying::crying::crying:
Click to expand...
Click to collapse
george46ko said:
Same prolem here...
Does anyone have recovery image for this phone?
I can't connect it to pc...
Click to expand...
Click to collapse
you can try this
enter to engineering mode by press on phone dial *#*#7646633#*#*, then choose connectivity, choose CDS information, choose Radio Information, choose sim 1, at column type AT+EMGR=1,7" Your IMEI NUMBER", than click Send AT Command. than restart.
abrunx said:
you can try this
enter to engineering mode by press on phone dial *#*#7646633#*#*, then choose connectivity, choose CDS information, choose Radio Information, choose sim 1, at column type AT+EMGR=1,7" Your IMEI NUMBER", than click Send AT Command. than restart.
Click to expand...
Click to collapse
"This command is not allowed in UserBuild"