Hello.
I buy this tablet 10.1" Google Android 4.03 Tablet PC 8GB 1GB DDR3 HDMI Bundle 10" Keyboard from e-bay for my son but the tablet is not working. It charges normally, but when I press the "power on" button, it turns on, it appears the word "ANDROID" in a black image and nothing more. I also tried the "reset" key. It turned off but when I turn it on, it does the same again.
Is there anything to do for this problem ?
Can someone help me?
Gorgolemis said:
Hello.
I buy this tablet 10.1" Google Android 4.03 Tablet PC 8GB 1GB DDR3 HDMI Bundle 10" Keyboard from e-bay for my son but the tablet is not working. It charges normally, but when I press the "power on" button, it turns on, it appears the word "ANDROID" in a black image and nothing more. I also tried the "reset" key. It turned off but when I turn it on, it does the same again.
Is there anything to do for this problem ?
Can someone help me?
Click to expand...
Click to collapse
Enyboby for help please?
Try taking the battery out of the tablet, putting it back in and turning it back on. Otherwise I'd take it in.
Related
good afternoon,
I have a coby mid8065 8Gb tablet. When the power button is pressed, it shows the coby screen, and nothing else. I tried holding the vol+ and power keys together, and got the same coby screen (white COBY, black screen). I tried vol- and power, no reaction at all. I tried vol+, vol- and power = COBY screen as before.
I have seen instructions to hold the return key while booting, but those leys on the lower left corner are not illuminated at all.
I hooked it to my computer via USB cable, and the computer won't recognize it. It charges via the usb cable OK.
Is there some SW I can put on the SD card that will help it boot?
I tried OneClickRoot, but it won't run.
I'm out of options here, so can someone please give me some direction. right now, this is a square frisby.
02/28/14 - I pulled the back cover and de-soldered the red battery lead, waited several minutes and re-connected it.
When the power button was pressed, I got a battery icon (as if it was charging), but no COBY in white letters. Holding any combination of buttons did not work.
After several minutes, when the pwr button was pressed, the COBY showed up again.
This tablet has an Amlogic processor, AML 8726-MX
If anyone knows about the guts of this tablet, there are two small contacts close to the battery leads, labeled FT BOOT, Shorting these has no effect on turning the tablet on.
Guys, I,m out of options here. There are a lot of really smart people out there, so someone should be able to come up with a procedure to get this up and running.
I do want to emphasize again, that when the tablet is connected via USB to a PC it is NOT recognized. I have tried Kies and Win XP SP3 SHOULD be able to recognize it.
Many thanks!!
I have an Eken GC10X tablet that runs the Allwinner A20 processor. This tablet has been giving me problems recently where it won't turn on, or when its on, it won't turn the screen on. It used to take 5 times in which i held down the power button to turn on (or the screen saver to turn off). This would often be over the course of an hour. now i can't seem to ever get the thing to turn on. When it does work i have to turn the screen saver off so the display is on all the time (and plugged in to the charger).
The thing isn't completely non-responsive. When its off and i plug it into the charger, the battery icon flashes and shows how full the battery is. When i unplug it the battery icon flashes again and turns off. I also "burnt" an SD card w/ the latest firmware from the Eken website and flashed it. It seems to have taken the firmware and ended the upgrade with "Card OK", but still nothing.
I used to be able to get it to show up as a device in windows when i plugged in the USB cable, but it doesn't seem to be detecting it now. It just charges when plugged in.
I'm kind of running out of ideas. Does anyone have any suggestions?
bump
Hi,
I have a CNM Touchpad 9 dual core 9" Android 4.1 which was working fine before, it use to charge, i've had it for a couple of months and not been used, however when i try and charge it now it seems to be dead. However when you plug in the charger and then keep hold of the power button, the tablet responds and shows the CNM logo on the tablet but as soon as you take your finger off the power button the tablet is non responsive. It's made in China the tablet if that helps. Any ideas what i can do to power it up? It cannot have completely shutdown for good.
Any help/guidance would massively be appreciated.
Thanks
j4v3d
Hello!
I have an Onix TB-512 16g tablet. I is not turning on. When i press power button, only black screen. doesnt turn on. When I connect it with charger the backside of the tablet is warmed up. I dont know whats going on. Please someone help me. Help me in understanding the problem.
Thanks
I have an Acer Iconia A1-811, when I now turn the tablet on it comes up with a picture of the green android with the words Easing underneath and never moves from this screen.
I have tried to reset the tablet volume up and pressing the power button also tried volume down and the power button but I just keep getting the same green android with the words erasing.
When I plug the tablet into a PC you hear the PC detect its there then the tablet powers on but only to have the same words erasing.
Hoping somebody can help me to get the tablet up and going again
Thanks in advance
I got the same issue with my Acer now. pls help us.
I've got same issue with my acer iconia a1-811. Somebody pls help with solution. My tab is barely a year.