Reodex your KitKat from CWM
Script work only for S3 mini
Unpack zip to PC
Reboot to CWM
Plug in USB to PC
Go to Mounts and Storage
- mount /system
- mount /data
Start odex.cmd from PC
Wait it finish
Reboot your phone
What is Reodex? Thanks in advance.
Gesendet von meinem GT-I8190 mit Tapatalk
Reodexing
Reodexing is creating *.odex files on deodex'ed ROM
About differences between odex'ed and deodex'ed roms you can read for example here
http://www.addictivetips.com/mobile/what-is-odex-and-deodex-in-android-complete-guide/
Great. Thanks again.
Gesendet von meinem GT-I8190 mit Tapatalk
---------- Post added at 05:37 PM ---------- Previous post was at 05:10 PM ----------
That means that the odex.zip only use for devs. I have an deodexed ROM, also I don't need this.
Gesendet von meinem GT-I8190 mit Tapatalk
Another explanation is this:
If you odex the rom, you'll have also more space in data (this is important because if you don't have partition ext4 in sdcard, you won't have too free space), increase battery life, more stability and increase perfomance( the Rom is more faster to load system and app) but you can't modifie apk after odex (you can't mod program with classes.dex).
Infact ODEX is an OPTIMIZED-DEX and Android load system and app faster than deodexed (DEOPTIMIZED-DEX) app and system.
When you have a deodex file (a lot of roms are deodexed) you have File.apk in system/app and in data/dalvik-cache/[email protected]@[email protected], but with odex file you have File.apk in system/app and File.odex in system/app
With these explanation you can understand that:
Odexed Rom = +fast -difficult_customization +more_battery_life +better_stability +less_ram_utilization
Deodexed Rom = -slow +customization -less_battery_life -less_stability -worse_ram_manager
does it only work for 4.4 or for stock 4.1.2 too?
for stock use this http://forum.xda-developers.com/showthread.php?t=2527268
I'm at Maclaws Carbon 4.4.2... so it should work.
What will be with my theme (cobalt) and with black carbon? Will that be kept?
Gesendet von meinem MD_LIFETAB_P9516 mit Tapatalk
I tried this with maclaws carbon 4.4.2 and TWPR. But when execute .cmd there is errors "device not found". So how to make mounts?
S3miniFin said:
I tried this with maclaws carbon 4.4.2 and TWPR. But when execute .cmd there is errors "device not found". So how to make mounts?
Click to expand...
Click to collapse
I did not try yet... scared a little - and looking for a way to make my theme.apk to theme.zip to flash. Anyway, did you boot your device into recovery befor conecting? As written in OP you should mount system and data from there.
The drivers needed you should have, cause you are alresdy at carbon...
Gesendet von meinem MD_LIFETAB_P9516 mit Tapatalk
grinder777 said:
I did not try yet... scared a little - and looking for a way to make my theme.apk to theme.zip to flash. Anyway, did you boot your device into recovery befor conecting? As written in OP you should mount system and data from there.
The drivers needed you should have, cause you are alresdy at carbon...
Gesendet von meinem MD_LIFETAB_P9516 mit Tapatalk
Click to expand...
Click to collapse
Yes, rebooting to recovery and mounting system and data(click both)
And yes, i installing drivers also.
S3miniFin said:
Yes, rebooting to recovery and mounting system and data(click both)
And yes, i installing drivers also.
Click to expand...
Click to collapse
Perhaps because of Maclaws TWRP... Try with CWM, I'm pretty sure it is to find at google...
Edit: You need to install Rom Manager to download cwm...
Gesendet von meinem MD_LIFETAB_P9516 mit Tapatalk
Related
Hello
I have compiled miui with the xxkpq stock rom as base. I used the MiuiPatchRom on github. It boots but there are a lot of FC's and then it crashed. I will release a beta soon. So please be patient. I think i have enaught time to release the beta in one or two days.
Sry for my bad english.
Sent from my YP-G1 using XDA
-----------------------------------------------------------------------------
MIUI XXKPQ 2.3.6 by ChaOS.ChriS
Changelog:
v.B0: (Current Release)
- Initial Release
v.B01
- added MIUI Bootanimation
- try to fix some fc´s and SystemUI by adding code from Noisyfox (seems not work :/ ... boots but all apps are fc and android.core crash´s every second)
v.B02
- rebase on v.b0
- try to merge code from i9000 patchrom and noisyfox´s patchrom (ypgb70)
- add progress step in installer script
- add new text output for "flashing"
Here is the first beta!
It Boots! but the most apps like kalender lockscreen settings etc are stock :/ dont know why and there is no statusbar. Uploading my Source tomorow
ROM ist broken ( not complete but boots )
Download ROM v.B0
Download Source Code
Flash instructions:
Flash in CWM
Dont worry that when you flash it Stucks a little time at "Mount and clean up system" i forget to add a New Text output in next build i fix that
I maked few changes and the the result was a bootloop :/ then i undo the changes and i got a bootloop so i think i need more time.
Edit: I think i know where the Problem is. I need a cwm flashable zip of the stockfirmware. I merge the content of the cm7 zip for the sgp4.0 and the factory.rfs from the xxkpq release but i think there is the Problem. I compile now the miuipatchrom with the cm7 as Base and try it. I tell you the result.
Edit2: I got a lot of erros while compiling the rom. I fixed the most of the errors but i cant compile the settings apk. I get many string warnings errors from aapt i try a clean build ....
Edit3: I fixed the erros in the Settings apk i know now where the problem is. I fix now the rest apks and compile it again
Sry for my bad english
Sent from my Nexus S using XDA
I compiled it few times without any error but i got everytime a bootloop. I dont know why. Somebody with more know how can continue this project. I can upload my work later.
Sent from my Nexus S using XDA
ChaosChris said:
I compiled it few times without any error but i got everytime a bootloop. I dont know why. Somebody with more know how can continue this project. I can upload my work later.
Sent from my Nexus S using XDA
Click to expand...
Click to collapse
Noisyfox (in another thread) has booted MIUI I think. Maybe he will help you?
Rapydax said:
Noisyfox (in another thread) has booted MIUI I think. Maybe he will help you?
Click to expand...
Click to collapse
Yes i know i ported his gb MIUI from yp-gb70 to the yp-g1 and it boots but its not complete but i can upload the Rom when i get noisyfox's permission.
I working on a new MIUI build again from stock xxkpq and the new patchrom release i will post the progress here but i have not so much time. So i dont know when i can release something
Sry for my bad english
Gesendet von meinem Nexus S mit Tapatalk 2
ChaosChris said:
Yes i know i ported his gb MIUI from yp-gb70 to the yp-g1 and it boots but its not complete but i can upload the Rom when i get noisyfox's permission.
I working on a new MIUI build again from stock xxkpq and the new patchrom release i will post the progress here but i have not so much time. So i dont know when i can release something
Sry for my bad english
Gesendet von meinem Nexus S mit Tapatalk 2
Click to expand...
Click to collapse
How about modifying error factors by replacing it with galaxy s2's file?
Neodymium said:
How about modifying error factors by replacing it with galaxy s2's file?
Click to expand...
Click to collapse
sorry but what do yxou mean?
ChaosChris said:
sorry but what do yxou mean?
Click to expand...
Click to collapse
In guide they say replace some errors with galaxy s2's one because it's most stable.
Sent from my YP-GB1 using xda app-developers app
Neodymium said:
In guide they say replace some errors with galaxy s2's one because it's most stable.
Sent from my YP-GB1 using xda app-developers app
Click to expand...
Click to collapse
Yes i know but i dont have erros it boots but there is no status bar and the most of the apps (settings kalneder lockscreen etc) are the stock ones :/
Did you ever end up ultimately using my patch in your release, or did you find another method? Either way, awesome job, we now have another rom for the 4.0.
Good job! I think, that you will fix everything and it will be one of the most incredible rom! good luck in your future work
sorry for my english
hanthesolo said:
Did you ever end up ultimately using my patch in your release, or did you find another method? Either way, awesome job, we now have another rom for the 4.0.
Click to expand...
Click to collapse
Sorry but what patch?
In my first port i used the MIUI from ypgb70 from noisyfox that was compiled with the patchrom too i used neodyniums patch pack ( http://forum.xda-developers.com/showthread.php?t=1719976 ) but its was not complete so i decide to Start my own port.
In that release i used the stock samung Rom xxkpq 2.3.6 and the official MIUI GB patchrom. There was some errors on compiling the settings.apk in the strings.xml but it was easy to fix that.
By the way i figured out the cwm Problem :/ its every time i Format /system With it. When i make a cleaning script that formats the system all is okay but when i manuelly Format it with cwm there are a lot of mounts problems and i must use a pit To restore
Edit: ah you mean your patch to comvert from SGS Tod SGP ? Yeah i used hat but that build dosent Boot and in this release i dont use that becoause i Start with the xxkpq from sgp
Gesendet von meinem Nexus S mit Tapatalk 2
Oh and i think i know where the problems are that the mist of the apps are stock samsung ones ... i will look in it tomorrow
And for the systemui Problem i think i can fix it ... i can look At the source from noisyfoxs MIUI
Gesendet von meinem Nexus S mit Tapatalk 2
You can use any code from my Github because it's a fully open-sourced project~
And if you successfully port some other MIUI apps (like MIUI settings) please let me known.
Let's collect any kind of mods that are working on aosp- based roms.
Therefore I need you to tell me what mods you tried, which rom you are running and of course what your results have been.
Even better if you could give some directions on how to make something work.
I'll try to get some kind of list for testing, make a compatibility list for different ROMs and maintain this thread.
Disclaimer:
These pieces of information are given as is. There is no guaranty that any of these modifications do really work on any of your roms. Neither I, nor the developer of your rom, nor anybody who is providing information and giving advices is responsible for what you do with your devices. Furthermore make sure not to report any bug regarding your rom without making sure it's not caused by any mod you might have installed.
To start off:
ACID Audio Engine V7.0 by TEAM AC!D:
(confirmed working on AOKP 4.2.2)
http://forum.xda-developers.com/showthread.php?t=1923630
How To:
Spoiler
1)First as always make a backup
2)Download and flash [AOSP3]AC!D_Audio_Engine_v7build_2802.zip then [AOSP3]AC!D_Audio_Engine_v7build_2805.zip and then ClearAudio+TEAM AC!D.zip
3)Wipe dalvik cache and cache
4)Fix permissions in recovery and reboot to system
5)In terminal emulator type:
Code:
su
mount -o remount,rw /system
aaengine
7)Reboot and if after 2 mins your system might crash in bootloop force reboot
8)Uninstall MusicFX using an root uninstaller or titanium backup or delete MusicFX.apk from /system/app
9)Reboot
10)Install SRSPanel
New MegaBass [audio booster] [upd. 19th March 2013]
http://forum.xda-developers.com/showthread.php?t=2074977
Credits go out to:
Lloir
maxwen
Ranomez
Gesendet von meinem HTC One X+ mit Tapatalk 2
Reserved
Gesendet von meinem HTC One X+ mit Tapatalk 2
And this one too( just in case)
Gesendet von meinem HTC One X+ mit Tapatalk 2
im sure i speak for Maxwen as well as myself here, but if people flash these then they are responsible for "issues" that may arise and not myself or max
Sure will of course add this
Gesendet von meinem HTC One X+ mit Tapatalk 2
You should put the title and then the link not the link and then the title cause its kinda confuseing and also the qcae one is not working on one x+ on aokp (or was not in an older aokp release) and i think it wont work on non xperia phones, also you put raccoon audio and that is not really much of a sound mod, and also you should have put the great ones like the xperia walkmans and megabass: http://forum.xda-developers.com/showthread.php?t=2074977 will test all things i can as long as i dont need to test sound mods cause acid v7 is working good enought for me.
EDIT: Also as far as I can tell that is not the latest BRAVIA ENGINE 2 zip out there, and also that one is specificall to the galaxy mini as far as I can tell so it won't work on the hox+
EDIT2: The lockscreen thing is not AOSP but for the xperia z only stock rom
I must admit right now it's just a result of some skimming I did. Will surely take a closer look at the links and tidy everything up a good bit as soon as I have time for that
Gesendet von meinem HTC One X+ mit Tapatalk 2
nchantmnt said:
I must admit right now it's just a result of some skimming I did. Will surely take a closer look at the links and tidy everything up a good bit as soon as I have time for that
Gesendet von meinem HTC One X+ mit Tapatalk 2
Click to expand...
Click to collapse
Yah, I just want to be helpfull, and so I'l post lots of links here to all the things I use on my rom (my allmostly 1gb of mods, lol)
Surely appreciated
Gesendet von meinem HTC One X+ mit Tapatalk 2
nchantmnt said:
Surely appreciated
Gesendet von meinem HTC One X+ mit Tapatalk 2
Click to expand...
Click to collapse
Here are cool things i use:
http://forum.xda-developers.com/showthread.php?t=1574401 Xposed Framework
http://www.villainrom.co.uk/forum/forums/xposed_framework_mods/ Xposed Modules (i use lots of them, and i love the per app settings)
http://forum.xda-developers.com/showthread.php?t=2240180 Xposed theme engine (may not seem usefull on roms with theme choser, but as multiuser theme choser is not working in aokp is usefull to set a theme to work on second user without force close also
http://forum.xda-developers.com/showthread.php?t=1629653 Xposed Tweackbox
EDIT: Acid v7 steps are totally wrong....
Here are the right ones:
1)First as always make a backup
2)Download and flash [AOSP3]AC!D_Audio_Engine_v7build_2802.zip then [AOSP3]AC!D_Audio_Engine_v7build_2805.zip and then ClearAudio+TEAM AC!D.zip
3)Wipe dalvik cache and cache
4)Fix permissions in recovery and reboot to system
5)In terminal emulator type:
Code:
su
aaengine
If this worked skip to step 7 If it gave an error continue:
6)Exit terminal and rerun it and write in it:
Code:
su
mount -o remount,rw /system
aaengine
7)Reboot and if after 2 mins your system crashes in bootloop force reboot
8)Uninstall MusicFX using an root uninstaller or titanium backup or delete MusicFX.apk from /system/app
9)Reboot
10)Install SRSPanel
11)Enjoy
OK I forgot read/write access but that's it. No need for the first run of aaenging on a read only system partition so why not directly remount rw and do it right?
And as you said the bootloop and freezes might be special to your setup, I didn't get them.
Gesendet von meinem HTC One X+ mit Tapatalk 2
nchantmnt said:
OK I forgot read/write access but that's it. No need for the first run of aaenging on a read only system partition so why not directly remount rw and do it right?
And as you said the bootloop and freezes might be special to your setup, I didn't get them.
Gesendet von meinem HTC One X+ mit Tapatalk 2
Click to expand...
Click to collapse
For me the system is automatically mounted as rw somehow, i think, or that script mounts it, didn't yet read it, so I'm not sure the mount command is needed.
As far as system is already rw its not needed but it doesn't hurt either. And it makes the giude easier to follow. Will take a look this evening at the theming engine and mega bass.
Gesendet von meinem HTC One X+ mit Tapatalk 2
Still testing in acid, xposed, and others. For now it seems like acid needs a fresh install as a base to run without hiccups. Did you flash it in fresh install or "dirty flash"?
Gesendet von meinem HTC One X+ mit Tapatalk 2
nchantmnt said:
Still testing in acid, xposed, and others. For now it seems like acid needs a fresh install as a base to run without hiccups. Did you flash it in fresh install or "dirty flash"?
Gesendet von meinem HTC One X+ mit Tapatalk 2
Click to expand...
Click to collapse
I did a dirty flash and also was having installed lots of mods (samsung galaxy s3 launcher, camera with photosphere, etc) and it works perfectly for me, perhaps you have some apps or mods that can't go good with acid, it happened to me also, try not to use any sound boosters or other equalizers.
Any more to go to the list?? If this gets nice and full I'll link it in my AOSP thread
Sent from my HTC One X+ using Tapatalk 2
Hey guys,
I'm searching for a solution to swap external sd to internal. I had to break the internal storage to make a I9003 working again.
Now, it boots the ROM from the external (but that's an other story).
Camera needs storage0 (internal storage) to work properly for DCIM. But I have only storage1 (inserted microsd).
In 2.3.6 swap sd was possible by editing vold.fstab. In Kitkat the opportunity has been denied.
I search for a way to make storage1 to storage0 in CM11. Does anyone have an idea? Do you know whether CyanogenMod is working on it?
Thanks ^^
Still no idea?
Gesendet von meinem GT-I9001 mit Tapatalk
Might wanna see how these guys did it for their phones:
http://forum.xda-developers.com/showthread.php?t=2599496
rboy28 said:
Hey guys,
I'm searching for a solution to swap external sd to internal. I had to break the internal storage to make a I9003 working again.
Now, it boots the ROM from the external (but that's an other story).
Camera needs storage0 (internal storage) to work properly for DCIM. But I have only storage1 (inserted microsd).
In 2.3.6 swap sd was possible by editing vold.fstab. In Kitkat the opportunity has been denied.
I search for a way to make storage1 to storage0 in CM11. Does anyone have an idea? Do you know whether CyanogenMod is working on it?
Thanks ^^
Click to expand...
Click to collapse
Since android 4.3 there no longer exist "vold.fstab"
U need to modify build.prop
go to /system/build.prop (via root explorer for instance)
and change
persist.sys.vold.switchexternal=0
to
persist.sys.vold.switchexternal=1
save it and reboot the device it may help
dc239 said:
Since android 4.3 there no longer exist "vold.fstab"
U need to modify build.prop
go to /system/build.prop (via root explorer for instance)
and change
persist.sys.vold.switchexternal=0
to
persist.sys.vold.switchexternal=1
save it and reboot the device it may help
Click to expand...
Click to collapse
It didn't work on my i9001.
I thought about that option but I read before that this isn't possible anymore since kitkat
Gesendet von meinem GT-I9001 mit Tapatalk
rboy28 said:
It didn't work on my i9001.
I thought about that option but I read before that this isn't possible anymore since kitkat
Gesendet von meinem GT-I9001 mit Tapatalk
Click to expand...
Click to collapse
If i remember,on my tablet with cm 11 it doesn't work too but if i updated to newer buid it worked like a charm
r u using cyanogenmod rom or other based on kitkat (like slimkat etc.....) ?
dc239 said:
If i remember,on my tablet with cm 11 it doesn't work too but if i updated to newer buid it worked like a charm
r u using cyanogenmod rom or other based on kitkat (like slimkat etc.....) ?
Click to expand...
Click to collapse
My i9001 has still a build from 21.03. synced. It's unofficial. The steps are big, not like nightlies, and that's great ^^
The i9003 of the friend is in his apartment. The build for the i9003 has some bugs, so I'll wait.
But the others here can share their results with the newest builds
The i9003 has cm working on (the only available one for this device) and I have PA 4.3.
So cm-related infos are welcomed
Gesendet von meinem GT-I9001 mit Tapatalk
Hi @rboy28, I'm facing pretty much the same issue as you on a Samsung Galaxy Tab GT-P1000 with damaged internal SD card.
I'm managed to install and run CyanogenMod 11 after physically taking the faulty chip out of the device, but I now need to make it use the external SD card as the internal one.
Have you had any luck ?
rboy28 said:
It didn't work on my i9001.
I thought about that option but I read before that this isn't possible anymore since kitkat
Gesendet von meinem GT-I9001 mit Tapatalk
Click to expand...
Click to collapse
man why they have to keep changing stuff. i spent days on this issue.
this is why android is having difficulty capturing the market from iphones.
2017, and i also getting this same problem with GT-P1000..
remove damaged internal storage, installed KK resurrection remix ROM on external storage..
-camera error "no external storage"
-browser error "can't download, no external storage"
-UMS no response (it worked on gingerbread before)
tinkerin' for 6 days, slept only at 7AM..
my eyes hurt (almost cryin' desperately too) from searching n tryin' n so on..
if only there's an angel with master linux degree, kindly enough to ease our 'fellow-pity-ship' misery..
You're not the only one…
Hi,
I tried for month to resurrect a tablet having the same problem.
My latest findings pointed to modifying the equivalent of the /etc/fstab file in the boot partition/image, but no tool I could find was able to open/modify the ROM image…
I eventually gave up and returned the tablet to its owner.
Hey,
since Android 5 i've missed the NFC ScreenOff Xposed Module. Looks like the developer doesn't work on this anymore. Nevertheless XlAfbk created a little workaround to use NFC while the screen is off. So thank him for his nice work I've only created the apk for our Z3C.
The apk is created for the FW 23.1.A.1.28. Maybe other FW will work too. Feel free to test and report your results here back.
Installation:
Make a nandroid backup! If you dont and something bad happens, your phone will be nearly unuseable because NfcNci.apk will FC continuously. So be sure you've made a backup.
Copy the file NfcNci.apk to /system/app/NfcNci/ and overwrite the existing file
Delete also the "arm" folder in /system/app/NfcNci/. Do not just rename it.
Reboot
Regards
hasenbolle
Moved from Apps & Games
A lot of thanks to you and XlAfbk!
Works as expected on Z3C [23.1.A.1.28].
One thing here. I was trying it yesterday, when there was no installation instruction. So I was trying so hard installing it, as the result I've got broken system
And only then I figured out to use XlAfbk's original post as reference...
Many thanks for your XlAfbk's mastermind and your hard work! :good:
Rights
Used ES File Explorer to replace the NfcNci.apk and deleted the arm folder. Unfortunately, ES File Explorer did not give execution rights to the NfcNci.apk and my phone did not start properly. Giving execution rights to Owner, Group and Other solved the problem after a reboot.
Thanks for the apk!
working! even without deleting the arm folder
N00b
Ok so I'm totally new to this way of interacting with my phone.
I installed ADB and the proper drivers. I can get "on" my device. I could copy the NfcNci file from the phone to my pc.
But when trying to copy (push) the modded file it says "Read-only file system".
I tried to find out how to change that but I read about a lot of commands like mount, so I'm not sure if that's correct and safe.
Can anyone help me out here?
And BTW does the device need to be rooted (is that what you call it?) to copy this new modded file to it?
Thanks already!
Thanks for this, works like a charm
Hey everybody,
is there any chance to create this awesome Mod for the new Xperia Firmware 23.4.A.0.546?
With the current update it won't work anymore.
I have tried to modify the apk but without success.
Thanks' a lot.
Hans_Werner
Heres a modified NfcNci.apk I compiled with the NFC screen off polling enabled. Its based on the NfcNci.apk I pulled from the .546 Xperia Z3 rom, which I think is the same as the compact. Tested with moonbreakers custom rom and stock, and it works.
https://www.mediafire.com/?s8dx4dtrd8vsu2t
just rename it to "NfcNci.apk" and copy into /system/app/NfcNci, then fix permissions to 644 (-rw-r--r--)
of course, goes without saying, backup your rom using recovery first
If it doesn't work, if someone sends me an NfcNci.apk from a z3 compact rom, I can recompile it with the mods also
Thank you very much 'tonysunshine'
The mod works like a charm with firmware .546 Xperia Z2. :good:
Great work and best regards
Hans_Werner
Is it also for z3c with lollipop 5.1.1 5803? Thanks
wishing this mod with the NfcNci.apk from Lollipop 5.1.1 build .546
Post #9 work with current firmware. Just delete arm folder and set permission of nfc.apk to 644. Restart, done.
Best
Gesendet von meinem D6503 mit Tapatalk
Hans_Werner said:
Post #9 work with current firmware. Just delete arm folder and set permission of nfc.apk to 644. Restart, done.
Best
Gesendet von meinem D6503 mit Tapatalk
Click to expand...
Click to collapse
Thanks a lot. Didnt read it
---------- Post added at 06:28 PM ---------- Previous post was at 06:20 PM ----------
tonysunshine said:
Heres a modified NfcNci.apk I compiled with the NFC screen off polling enabled. Its based on the NfcNci.apk I pulled from the .546 Xperia Z3 rom, which I think is the same as the compact. Tested with moonbreakers custom rom and stock, and it works.
https://www.mediafire.com/?s8dx4dtrd8vsu2t
just rename it to "NfcNci.apk" and copy into /system/app/NfcNci, then fix permissions to 644 (-rw-r--r--)
of course, goes without saying, backup your rom using recovery first
If it doesn't work, if someone sends me an NfcNci.apk from a z3 compact rom, I can recompile it with the mods also
Click to expand...
Click to collapse
Hans_Werner said:
Thank you very much 'tonysunshine'
The mod works like a charm with firmware .546 Xperia Z2. :good:
Great work and best regards
Hans_Werner
Click to expand...
Click to collapse
Works also for me... THANKS :fingers-crossed::fingers-crossed::good:
Hi
Thanks for the modd, it work great on mine too.
I would like to know if it's possible to have this kind of modd but only for a detection on the screenlock and not always when screen is off ?
Thanks
Tonysunshine, I confirm modified NfcNci.apk works fine on the .546 Xperia Z3c.
Anyone has this mod for .232 fw?
Thanks
No special apk is needed. Post #9 works well with fw. 232
Gesendet von meinem D6503 mit Tapatalk
Hans_Werner said:
No special apk is needed. Post #9 works well with fw. 232
Gesendet von meinem D6503 mit Tapatalk
Click to expand...
Click to collapse
It's only for deodoxed rom?
Thank you!
NFCLock Screen only
I've just managed to make a modified apk that give only NFC detection on screenlock and no more on screen off
Tested on my stock .232 rom
File attached to this post.
can anyone share untouched /system/apps and /system/priv-apps
i had after root deleted any apps and now small issue with small things. Now i want see if i can fix it after add the removed apps
Gesendet von meinem LG-H850
No offence intended, bit that'll teach you to delete apps . I would highly suggest freezing or disabling apps before completely removing them. Unfortunately, I don't have that model, but you can probably get them from a stock zip.
MetaIIica said:
can anyone share untouched /system/apps and /system/priv-apps
i had after root deleted any apps and now small issue with small things. Now i want see if i can fix it after add the removed apps
Gesendet von meinem LG-H850
Click to expand...
Click to collapse
Here you can find a zip with untouched system