Hi,
By arriving my phone (Lenovo A656) was mostly in Chinese, and since I'm not that good at chinese (sorry guys) I wanted a new ROM installed on this phone (Also because I couldn't install Google Play and stuff). Now the only ROM I had found was one from NeedRom, saying to be an official ROM (with Flash_tool, now deleted from needrom, I still have the files if you're interested). I hoped this would work, but it got bricked instead (at least, that's how you call it when the phone doesn't turn on anymore?). Whenever I try to put on the ROM again, I get a DRAM error. Is there anyone who can help me here?
Thanks a lot in advance!
Related
I came here after many days trying to fix this phone!
First, I don't know how to work with phones! It was looked due to "Too many tries to unlook it!" and was requesting to connect to one google account to unlook it.
The phone is a generic Spreadtrum SC6820 that has "i9300" writed on the space where the battery goes and its circuit board is marked with the writing L3035_MB_V2.2 and there one stick that reads L3035F-P9600-QUAD-2G-HY-V2.03.B05.
I was unable to find the stock firnware and did not know how to backup it using the ResearchDownload.exe tool available for the Spreadtrum, so I fallowed that very bad tutorial http://forum.xda-developers.com/showthread.php?t=2320640 and I ended with it bricked!
After that, I tried to flash all the roms I could find to see if any would work but all I managed to get is a phone with inverted color scheme, inverted touchscreen, no radio, no BT and no wifi!
If anyone here has the firnware compatible with this phone, please share it, Thanks.
i got the same problam my device has a inverted touchscreen after i flashed its rom using recherche download.please help
Hi everyone!
After weeks of searching for a solution to my problem I came here as last resort, because if you can't help me, no one can.
I have a Chinese branded phone, HTM H9001, and I screwed up the phone. At the time he can't boot, freezes on the logo.
What I did was put a different build.prop from a custom rom made for this phone, because I was been messing around trying to put a theme.apk working on my phone.
I have made this because my phone could not be recognized by any computer, there for not allowing me to use any software to flash a custom rom, so i try to mod the rom by copy paste and in the process I lost wifi and bluetooth.
Those any one now how to reset the/or a phone by hardware? or now another way to solve my problem?
Best regards.
(Sorry for new post, a guys ask me to write my ask here)
Hello guys, this is two days I'm looking for how to fix the problem but it's two days that I can not.
There are two days I tried to install firmware on my Jiayu 3s while operating, SP Flash Tool said the root had gone well since that day, impossible to turn on my phone, does not start, but does not load is detected as the "Alcatel DNIS # ** Interface" on my computer, I tried several methods; reinstall the drivers, try to reflash ect .. but nothing happens. I know this method before, I had a Chinese firmware (MOLY.lr9.w1423.md.lwtg.cmcc.mp.v9) , everything had gone well, stages ect ..
But when I tried to flash firmware with Europeans, it was bricked the phone and from that day, I can not do anything.
(Sorry for the bad English but I use Google Translate)
Can you help me solve the problem? I you will be very grateful if someone could help me.
My phone has a non-removable battery.
Regards,
Lackted
I need help please...
I need my phone
Hello,
I've wanted to get back on my tablet to the factory reset state, so I've messed up. I tried first with factory reset/delete cache/data.. But I had deleted some of the system apps (bloatware) so It wasn't factory state.. So I did a research and I found on acer website the original OS for B1 710 so I downloaded it and put it on sd card and from the stock recovery installed it. So now my touch screen doesn't work, so should I call that soft brick? Btw. my tab was rooted with KingRoot
I found plenty of threads on XDA but many of them including unlocking bootloader and installing CWM, the links are down (redirecting to some russian site telling me the site is down). So my question is: How can i restore my tablet to factory state? Flash the original firmware/rom.. I don't have experience with MediaTek chipsets and this kind of devices. So I really don't know what to do to bring my tablet back to working state/factory state..
What can I do?
Please help,
Thank you
- I'm sorry if my thread is in wrong section (I'm new in posting threads in XDA and I despredly need help with my tab)
Same here!
Hi, though it's been a been a few months ago your post was posted but I've got the same problem as you. I rooted my tablet with Kingroot and deleted bloatware apps. I went to recovery mode and tried to hard rest my tablet but same issue. I'll answer within a few days time to let you know any fix. Right now I'm trying to install 3rd party apps to fix my screen but for now I've got some paperweight with me. I'll try my best to fix this issue and hope someone else would help us or what their experiences are like.
Try this: https://forum.xda-developers.com/search.php?searchid=432451738
Hello. Is anyone there has a stock firmware for Jlinksz T906 ZH960. I flashed all the firmware that I can find here on XDA as well as other sites. The reason for this is because I'm finding a TWRP for this device to be flashed using SPFT. After I find one that fits my device, I immediately go to SPFT to flash it. But as I click the Download button, an error appears (something like PMT error) so I fix it by doing a FORMAT (worst thing that I did in my life) without backupping the rom because I am so sure that the firmware on this forum is actually gonna work for my device (which I realized it isn't). After formatting I can't open the device so I flashed T906 stock firmware (from the link above). After I flashed it, a lines on the screen appeared. This is the time that I realized that I'm f****d. So I went to Google and search for some more roms for T906 and I found this one that has a download link for a dump rom I think (the only firmware that I tried so far that has the display working properly). I downloaded it, flashed it and an error appears on the device "boot error!!!!!". After days and days of non-stop searching (went to some Russian and Chinese sites) on how to repair my bricked device it is time to ask for help. I flashed all the roms that I could find but only with this problem: black screen then suddenly turns off, a red or blue lines on the screen.
I recently found out that whenever I flashed the uboot.bin and pro_info of the rom with working display on some of the firmwares that I found, the display is working but the "boot error!!!!!" still haunt me.
Please, I need this device for online classes. If there's someone that can help, please.
See the attached image. That is the board model and the chips and all.
Before the problem (the time that I can fully use the device) I saw that it has an Android 9.0 Pie which is probably fake because I know for sure that it was KitKat.
Info on the back of the board:
ZH960-vEN000P
ZH960 TB-v4.1
B20200430_M116
ZH107ATB V4.1
Near the simcard tray:
ZH906-MB-v4.1
Jlinksz T906 tablet model
All help is appreciated
Thank you!