Anybody know if the LCD for a Touch Pro (Raphael 100) is compatible with the one of a AT&T Fuze (Raphael 110)?
I broke my LCD and am looking at parts for repairing it (full service comes at 180$ but you can buy the LCD/Digitizer off ebay for less than 80$) but only the HTC Touch Pro version is advertised.
Thanks in advance for any pointer.
UM
found myself a fix.
Is this as simple as replacing the screen? meaning not technical could do it?
i tried to replace my screen and lcd and i broke a tiny little wire/circuit. so i was out 75 bucks just like that. buy one off ebay, its so much easier. replacing the screen is not a trivial task.
Thanks will consider that.
Hi all,
I'm looking for HTC Hero digitizer touch screen (not LCD replacement) but no luck so far.. the device has a cracked outer screen but besides that everything is fine, touch operations works fine as well.
Any help would be greatly appreciated.
Thanks.
I needed one for a ppc a while back and managed to get a genuine one on ebay. Have a look on ebay and make sure you buy a genuine one. Some seller are selling dismantled parts like the digitizer even though they may be second hand, but still genuine.
good luck
I need one too.
I can't post outside links yet but I found two shops that have touch screen digitizers for HTC Hero.
g-plushk dot com and repairsuniverse dot com
jimmypee said:
I need one too.
I can't post outside links yet but I found two shops that have touch screen digitizers for HTC Hero.
g-plushk dot com and repairsuniverse dot com
Click to expand...
Click to collapse
thanks. i will kee this if sumthing comes up.
kudos
try ebay. the best place to get all essential parts of hero. not only screen digitizers but i got myself complete housing for the phone
digitizers and LCD screens
brijeshg said:
try ebay. the best place to get all essential parts of hero. not only screen digitizers but i got myself complete housing for the phone
Click to expand...
Click to collapse
They're available from a wide number of Amazon sellers as well. My dilemna is since there's no obvious physical damage, just one area that is always dead when I try to hang up a call However, if I switch to landscape mode with keyboard out, I can hang up, but that's kind of a pain.
My dilemna is How do I determine if the problem is caused by the digitizer or the LCD panel OR possibly both?
i repaired my hero just yesterday...had the same problem of you, changed the digitizer and now everything is working...the only reason i tried to repair the phone is because on ebay you can find the digitizer to just 10$, so even if it isn't the main reason of your problem, the cost is very limited and you can have fun disassemblying-reassembling your phone
Not really sure where I should be posting this question. This forum seemed the most appropriate though.
Looking for a replacement for my Evo 3d, yet another phone I have owned where the screen has cracked. I have ordered the parts to replace the Digitizer and LCD as there is currently a fairly high resale value for this phone (compared to how much I paid for it)
So I have been looking for a phone that is a step up hardware wise and one that has a reasonably easy to replace digitizer or where the digitizer and lcd are not stupid money. ie htc one x 55 GBP compared to S3 @ 140 GBP
Ideally I want one where the digitizer can be easily replaced, but having looked it seems that they getting a much stronger bond to the LCD forcing you to get the LCD as well.
At the moment it's the HTC one x, non replaceable battery is making me want to look elsewhere though.
Any thoughts as to what would be suitable?
Guys,
Today I dropped my DX (so much to say about Friday the 13th...)
You can see it in the attached picture. I just wanted to ask, will the following replacement work:
http://www.ebay.de/itm/HTC-Desire-X...AU_MobilePhoneAccessories&hash=item20d2dca972
Thank you in advance!
Few weeks ago, I dropped my DX too, although damage was less. I read about digitizer replacement on HTC devices (in general) and I read it's not that easy as on Samsung devices. One guy tried to replace digitizer and he ended up with broken LCD panel. You can also buy whole module (LCD screen + digitizer) but it's like a roll of a dice - you can get good lcd and you can get bad lcd too. It's a risk. You can send it to local repair centre. I was told it would cost about 100-120€. From then, I knew, I have to live with that broken screen. lol
Found something different:
http://www.parts4repair.com/complete-screen-assembly-with-lgp-for-htc-desire-x-t328e/
Does anybody have experience with that shop? The price is ok, I would even order a new back cover there (because mine is a bit broken, too).
Hard to replace
I've tried to replace the touch screen (only the glass). In eBay it's about 25$ or something like that.
It hard, very hard to replace. I've ended with a broken LCD, because when try to separate the glass from LCD, LCD broke.
For me, it's better to replace the whole screen, not only the glass. I've seen it for 51$ in eBay, but worth it.
Video on how to replace (as you can see, you need a dryer, and big ball, because phone gets VERY hot, and you're the whole time thinking you're going to melt it
.you*tube*.co*m/*watch?v=hzRsLDahWVg
I won't try to replace only the glass, because my lcd is already broken. So I'll replace whole display unit (see link above for shopping details). Video on how to replace just the whole screen assembly can be found here: https://www.youtube.com/watch?v=hzRsLDahWVg
Good news guys... My package arrived in Germany, so soon I will be able to replace my screen and get my DX working again...
I have a Problem
I didnt drop my xtouch but its touchscreen isnt working at the corners HELLLPPPP
WHAT TO DO?
Anybody knows a reliable source for a new lcd + digitizer module for desire X?
kisbatyu75 said:
Anybody knows a reliable source for a new lcd + digitizer module for desire X?
Click to expand...
Click to collapse
Look a few posts above, my post #3 contains a link (that's the shop I used, lcd + digitizer are stil working well).
Firday the 13th... aaaand I dropped my Desire X smack on the corner, leaving me with a nice mosaic of cracks all over.
Thanks for the provided links. Guess I have some tinkering ahead of me....
help
after i replaced removed the digitizer and put it back it not sticking ...
i cleaned it using glass cleaner also ...!!
[email protected] said:
after i replaced removed the digitizer and put it back it not sticking ...
i cleaned it using glass cleaner also ...!!
Click to expand...
Click to collapse
Did you remove the digitizer from the lcd? If yes, I actually don't know what to do; but I used a complete assembly of lcd and digitizer as replacement. It's sticking at the four corners, at least for me.
Its is sticking but slight gap near the ui keys .....
I think there is dust between the screen and the digitizer
Sent from my HTC Desire X
hi help
can i use this
http://www.ebay.in/itm/121348746163?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
or
http://www.ebay.in/itm/151326952917?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
to stick the glass back
which is better to buy
please some one tell fast
I'm looking for whole screen bundle (lcd and digitizer) for my atrix but I couldn't able to find it yet. I found few US websites, but I don't think they ship internationally. Do you know a website who sell a whole package?
Also, I also doubt if it is worth to fix atrix in the first place. My USB input is somewhat broken (cannot connect to PC), lcd has dead pixels and digitizer is almost gone. 2 months ago phone get a little water in it so I suspect that is the problem. What do you guys recommend?
If I were you, I'd just buy a cheap used Atrix (like some bricked one) and scavenge the parts.
Yeah actually I thought that but it will be used like my phone and it can cause problems any minute. Besides, even a broken phone is almost the same price as brand new lcd + digitizers. So, if I have to choose, I'd choose to assembly lcd and digitizer by myself since it would be more solid.