i keep getting a continuous error message stating , Unfortunately, Nfc service has stopped. this started after i tried installing the wallet workaround.
my galaxy is on version 4.3 vruemk2, any help would be appreciated.
Wresrex said:
i keep getting a continuous error message stating , Unfortunately, Nfc service has stopped. this started after i tried installing the wallet workaround.
my galaxy is on version 4.3 vruemk2, any help would be appreciated.
Click to expand...
Click to collapse
There are no working wallet workarounds for the factory stock MK2 ROM that I am aware of.
However, if you'll let us know what workaround you tried to use we may be able to help recover.
I had the same issue.
Vzw s4 mk2 safestrap hyperdrive rls12. I had to recreate slot 1. Haven't tried the update again.
Sent from my XT1060 using xda app-developers app
---------- Post added at 10:13 PM ---------- Previous post was at 09:46 PM ----------
http://forum.xda-developers.com/showthread.php?t=2540196
This is the Google Wallet NFC fix ( tap to pay functionality ) method that I tried unsuccessfully. I used kies to reinstall mk2. Rooted, installed safestrap, installed hyperdrive RLS 12. Setup HD12 as active in ss and setup the ROM letting the phone sit 10+ minutes before reboot after configuration as described in the original post. Next up, booted into recovery, installed the NFC zip, fixed permissions and rebooted the phone. Instant NFC force close on startup... Over and over. factory reset and reinstall of the ROM didn't fix the problem, I had to recreate slot1 in ss.
The above steps happened after the same NFC force close issue occurred after trying this same fix on my original rooted, safestrapped mk2 operating system. Hence the reason Kies was used to factory restore the device in the first place. So basically I tried twice and was unsuccessful both times.
The zip file from the original post was removed and the thread was locked before I could post this information. I had to reset my phone twice but wasn't upset because the author never stated that the hack would specifically work on the mk2 bootloader with safestrap.
I hope that helps. If anyone can point me in the right direction to get Google Wallet tap to pay working on the vzw s4 mk2 bootloader , please do let me know by responding to this post.
Sent from my XT1060 using xda app-developers app
bqw371 said:
I had the same issue.
Vzw s4 mk2 safestrap hyperdrive rls12. I had to recreate slot 1. Haven't tried the update again.
Sent from my XT1060 using xda app-developers app
---------- Post added at 10:13 PM ---------- Previous post was at 09:46 PM ----------
http://forum.xda-developers.com/showthread.php?t=2540196
This is the Google Wallet NFC fix ( tap to pay functionality ) method that I tried unsuccessfully. I used kies to reinstall mk2. Rooted, installed safestrap, installed hyperdrive RLS 12. Setup HD12 as active in ss and setup the ROM letting the phone sit 10+ minutes before reboot after configuration as described in the original post. Next up, booted into recovery, installed the NFC zip, fixed permissions and rebooted the phone. Instant NFC force close on startup... Over and over. factory reset and reinstall of the ROM didn't fix the problem, I had to recreate slot1 in ss.
The above steps happened after the same NFC force close issue occurred after trying this same fix on my original rooted, safestrapped mk2 operating system. Hence the reason Kies was used to factory restore the device in the first place. So basically I tried twice and was unsuccessful both times.
The zip file from the original post was removed and the thread was locked before I could post this information. I had to reset my phone twice but wasn't upset because the author never stated that the hack would specifically work on the mk2 bootloader with safestrap.
I hope that helps. If anyone can point me in the right direction to get Google Wallet tap to pay working on the vzw s4 mk2 bootloader , please do let me know by responding to this post.
Sent from my XT1060 using xda app-developers app
Click to expand...
Click to collapse
Every time I tried to point out to the author of that "fix" that it didn't work he got upset. However, it's been reported by some that they got it to work on Hyperdrive. I wasn't ever able to get it to work, and it always killed wifi. I'd suggest not using it on an i545.
https://www.dropbox.com/s/bm6r5nnah3hjz0u/dbSGS4_GE43_R141Wallet.zip
Here is the fix your looking for.
Before you flash this:
Remove any remnants of google wallet from your phone. That includes uninstalling the apk and removing its data from /data/data.
1. Flash in safestrap recovery
2. Fix permissions.
3. Reboot
4. Enjoy tap and pay
Sent from my SCH-I545 using xda app-developers app
---------- Post added at 09:59 AM ---------- Previous post was at 09:40 AM ----------
The fix i posted above works flawless on my vzv sgs4 mk2 stock rom.
Sent from my SCH-I545 using xda app-developers app
---------- Post added at 10:11 AM ---------- Previous post was at 09:59 AM ----------
If this NFC fix kills your wifi as it has mine you must edit the following line in your build.prop to read "false"
Ro.securestorage.support=false
Sent from my SCH-I545 using xda app-developers app
Related
Hi Guys first off let me say thank you in Advance for you help.
My problem is I'm helping a guy I work with root his Verizon Galaxy S4 the ME7 Version. What I helped him do is Install Root on his Device so were definatly rooted. Then he installed safe strap and downloaded the Hyper-Drive 9. The problem is that the rom installs fine but when we reboot we keep getting the boot-loop black screen. Every time I try to do a full system wipe it Fails so I'm not sure what the issiue is, obviously I'm missing something. I created a data partition fine with no problems I followed Zedo Max Instructions to the letter but there is something getting me hung up. Please guys guide me in the right direction to get this issiue resolved thanks again guys
chickmagnet_25 said:
hi guys first off let me say thank you in advance for you help.
My problem is i'm helping a guy i work with root his verizon galaxy s4 the me7 version. What i helped him do is install root on his device so were definatly rooted. Then he installed safe strap and downloaded the hyper-drive 9. The problem is that the rom installs fine but when we reboot we keep getting the boot-loop black screen. Every time i try to do a full system wipe it fails so i'm not sure what the issiue is, obviously i'm missing something. I created a data partition fine with no problems i followed zedo max instructions to the letter but there is something getting me hung up. Please guys guide me in the right direction to get this issiue resolved thanks again guys
Click to expand...
Click to collapse
any help guys would be appreciated
I'm not on safe strap, but, from what I've read, after installing your Rom of choice, you have to install another safe strap link (can't remember/know what it is) on top of the rom, before rebooting. Have you done that? If not, go to the xda safe strap site for the info. Sorry, I can't link it.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 08:47 AM ---------- Previous post was at 08:44 AM ----------
After installing your Rom of choice, and before rebooting, you need to install another safe strap folder or link. Can't remember exactly what it is, since I'm not on SS. Have you done this? If not, it may well be your problem. Sorry,I have no link to it but it should be on xda.
Sent from my SCH-I545 using Tapatalk
gimpy1 said:
I'm not on safe strap, but, from what I've read, after installing your Rom of choice, you have to install another safe strap link (can't remember/know what it is) on top of the rom, before rebooting. Have you done that? If not, go to the xda safe strap site for the info. Sorry, I can't link it.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 08:47 AM ---------- Previous post was at 08:44 AM ----------
After installing your Rom of choice, and before rebooting, you need to install another safe strap folder or link. Can't remember exactly what it is, since I'm not on SS. Have you done this? If not, it may well be your problem. Sorry,I have no link to it but it should be on xda.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
tried that but still didn't work. What I did was root the phone, then I crated a rom slot gave that slot a nickname then activated that slot proceeded to wipe then advance to wipe dalvic, cash and system I think. At that stage when I slide my finger to wipe it says Failed.. please someone help me with this
Hmm possibly a bad download of the rom. Try to re download and install.. Also in the past some roms had to be installed on a specific rom slot... Just a thought
No questions to why I'm doing this just answers please.
MK2. was rooted and safestrap 3.71
Uninstalled SS recovery then went to SU and did full unroot.
Now I feel like I missed a step and I can't for the life of me figure it out.
I got this far and the 4.4.2 update keeps failing and I still have a "custom" boot screen when it powers on.
I'm on a really tight schedule to get it back to 4.4.2 please send me some links or tips. I'm too close to a hammer.
Do I need triangle away?? need SU to install and run triangle away?
Do I need to DL odin and flash an MK2 rom thingamajigger in download mode?
I'M IN A GLASS CASE OF EMOTION!
To take any ota you need to be 100% stock...nothing frozen nothing uninstalled.
Sent from my SCH-I545 using XDA Premium 4 mobile app
You are going to need Odin at this point to clear the custom screen. There is not a root method yet for 4.4.2. If you have already removed Safestrap and SU then you are pretty much stuck until and Odin image is release for 4.4.2.
Sent from my SCH-I545 using Tapatalk
First you should Odin to stock mk2 using surges no-wipe tar
Then take the ota
---------- Post added at 08:27 AM ---------- Previous post was at 08:22 AM ----------
http://forum.xda-developers.com/showthread.php?t=2578209
Thank you all.
Mod please close thread. Answered and completed.
Thank you!
I tried updating my rom and my phone will not boot. I cannot get past the samsung splash screen showing me the unlock icon. I have tried installing a different recovery, wiping everything, restoring from a backup from my SD card... no luck. I have been reading on here, http://forum.xda-developers.com/showthread.php?p=30386309 and it kind of sounds like my issue. sometimes when I try wiping and installing a rom, the phone reboots when it has to write data, eg. installing gapps. no matter the gapps package im installing, kit kat or jellybean, the phone will reboot in the middle of the install. it is almost like the R/W is now corrupt. Anyone have any idea?
We need more info than that etc build you are on, and what build you were trying to update to.
Sent from my SCH-I545 using XDA Premium 4 mobile app
same problem !!PLEASE HELP!!
I have the same problem. I upgraded my S4 to kikat a week ago using this method http://forum.xda-developers.com/showthread.php?t=2726868 worked fine. then i lost my phone at the park after about a couple hours trying to call it and find it a kid answered the phone. he wouldn't help me get it back and said he was gonna keep it and wipe it. i filed a police report and a few days later they got my phon back. but now its stuck in a boot loop on the unlock custom splash screen. the kid that took had my phone was only 8 years old. is there anything i can do to get my phone working again?
Blaymon said:
I have the same problem. I upgraded my S4 to kikat a week ago using this method http://forum.xda-developers.com/showthread.php?t=2726868 worked fine. then i lost my phone at the park after about a couple hours trying to call it and find it a kid answered the phone. he wouldn't help me get it back and said he was gonna keep it and wipe it. i filed a police report and a few days later they got my phon back. but now its stuck in a boot loop on the unlock custom splash screen. the kid that took had my phone was only 8 years old. is there anything i can do to get my phone working again?
Click to expand...
Click to collapse
Your best bet is to just Odin the NC5 stock firmware back on there then. You can try the no wipe first.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 11:55 AM ---------- Previous post was at 11:53 AM ----------
Here
http://forum.xda-developers.com/showthread.php?t=2735172
Sent from my SCH-I545 using Tapatalk
thanks
Mistertac said:
Your best bet is to just Odin the NC5 stock firmware back on there then. You can try the no wipe first.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 11:55 AM ---------- Previous post was at 11:53 AM ----------
Here
http://forum.xda-developers.com/showthread.php?t=2735172
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Thank you so much my phone works again. By any chance do you know if there is a way i can get rooted again if not that's OK i am happy my phone works
Blaymon said:
Thank you so much my phone works again. By any chance do you know if there is a way i can get rooted again if not that's OK i am happy my phone works
Click to expand...
Click to collapse
Well there are some partial downgrade methods on here which require a few files and Odin again. I haven't done it myself and I've seen some have no issues at all with it and some have had nothing but issues.
Sent from my SCH-I545 using Tapatalk
ugh. im having the same issue. Installed NC5 today from a clean install on my MK7 phone that was running NC2.
It installed and booted up fine. I installed some apps and rebooted. Now stuck on the Samsung logo with blinking blue led light. Can't get into recovery.
So I was just trying to use the towelroot, but I'm guessing because I had the fnk1 build it wouldnt let me, I found a guide to downgrade to build nc5 with Odin 3.0.9. I successfully did that but now when the phone turns on, I get a constant string of errors that wont allow me to do anything else.
Unfortunately the process android.process.acore has stopped.
Unfortunately the process android.process.media has stopped.
Unofrtunately Gmail has stopped.
Anyway to get rid of this? maybe something I can flash over it?
krimd00t said:
So I was just trying to use the towelroot, but I'm guessing because I had the fnk1 build it wouldnt let me, I found a guide to downgrade to build nc5 with Odin 3.0.9. I successfully did that but now when the phone turns on, I get a constant string of errors that wont allow me to do anything else.
Unfortunately the process android.process.acore has stopped.
Unfortunately the process android.process.media has stopped.
Unofrtunately Gmail has stopped.
Anyway to get rid of this? maybe something I can flash over it?
Click to expand...
Click to collapse
EDIT: Fixed, factory wipe through recovery boot.
Was gonna say I wiped data in stock recovery at that point to fix it.
Travisdroidx2 said:
Was gonna say I wiped data in stock recovery at that point to fix it.
Click to expand...
Click to collapse
Thank you Travis. Now If I could just get a custom recovery to load.
krimd00t said:
Thank you Travis. Now If I could just get a custom recovery to load.
Click to expand...
Click to collapse
I flashed nc5 and then used safestrap to run eclipse. Wife is happy again. It was sad her mdk s4 had hardware problems. Had to get another one and it came on nk1
Travisdroidx2 said:
I flashed nc5 and then used safestrap to run eclipse. Wife is happy again. It was sad her mdk s4 had hardware problems. Had to get another one and it came on nk1
Click to expand...
Click to collapse
Is she happy with eclipse? I just need something simple, was gonna try to 4.4.2 stock/cleaned
krimd00t said:
Is she happy with eclipse? I just need something simple, was gonna try to 4.4.2 stock/cleaned
Click to expand...
Click to collapse
Eclipse is a stock based ROM so everything works and more. My wife hates stock but loves eclipse.
Does it get rid of all the bloat?
Sent from my SCH-I545 using XDA Free mobile app
krimd00t said:
Does it get rid of all the bloat?
Sent from my SCH-I545 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, it is fully debloated. And all stock features still work. If you have never gave it a try I would highly recommend trying it!
---------- Post added at 04:50 AM ---------- Previous post was at 04:49 AM ----------
I Odin nc5, rooted with towelroot, installed safestrap. Used the app in Eclipse OP to make phone permissive and flashed eclipse. Profit.
I used the safestrap recovery from here.
http://forum.xda-developers.com/gal...ated-safestrap-i545-kitkat-v3-75-rom-t2905885
---------- Post added at 04:57 AM ---------- Previous post was at 04:50 AM ----------
@sd_shadow, I rooted my droid razr T912 using the iRoot method. I have bootstrap 3.72 installed and I had made a back up of the image prior to installing CM 11. I'm running into errors installing anything on my razr now. I tried to go back to my old image copy but I erased system along with dalvic, data so now it won't boot up. I still have access to bootstrap, can you help me please? Do I need to restore the factory image or since I have bootstrap is there a way to get a new image on without the system files?
villian1998 said:
@sd_shadow, I rooted my droid razr T912 using the iRoot method. I have bootstrap 3.72 installed and I had made a back up of the image prior to installing CM 11. I'm running into errors installing anything on my razr now. I tried to go back to my old image copy but I erased system along with dalvic, data so now it won't boot up. I still have access to bootstrap, can you help me please? Do I need to restore the factory image or since I have bootstrap is there a way to get a new image on without the system files?
Click to expand...
Click to collapse
All Questions are to be posted to Q & A forum, I have requested that this thread be moved to Q&A.
---------- Post added at 12:23 PM ---------- Previous post was at 12:21 PM ----------
Which model number is on back cover of phone?
What are the full file names used? safestrap? rom? gapps?...
sd_shadow said:
All Questions are to be posted to Q & A forum, I have requested that this thread be moved to Q&A.
---------- Post added at 12:23 PM ---------- Previous post was at 12:21 PM ----------
Which model number is on back cover of phone? XT912
What are the full file names used? safestrap? rom? gapps?...
Click to expand...
Click to collapse
I used Rootmaster.apk to root the phone. I used stargo's 3.75 Safestrap 31-Jan-2015 for the recovery.
I used cm-12.1-20150519-NIGHTLY-spyder.zip and
gapps-lp-20150314.zip
but like I said these fail, which is fine but I can't get my old image back because it fails at the system install. I think it's because I initially wiped system?
In op you wrote that you used 3.72?
Sent from my XT907 using Tapatalk
Sorry
sd_shadow said:
In op you wrote that you used 3.72?
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
I'm literally doing this while go in/out of meetings today. I think I need to re-root the phone again?
villian1998 said:
I'm literally doing this while go in/out of meetings today. I think I need to re-root the phone again?
Click to expand...
Click to collapse
If you can boot to twrp recovery, root doesn't matter
Sent from my XT907 using Tapatalk
---------- Post added at 02:09 PM ---------- Previous post was at 02:05 PM ----------
What files do you have on device now?
Sent from my XT907 using Tapatalk
sd_shadow said:
If you can boot to twrp recovery, root doesn't matter
Sent from my XT907 using Tapatalk
---------- Post added at 02:09 PM ---------- Previous post was at 02:05 PM ----------
What files do you have on device now?
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
An update, I tried to re-install the old backup but without system, in which it didn't do anything but eventually came up to the bootstrap screen. It stated that I didn't have su and If I wanted to install the SU binaries. I clicked yes thinking that would get it to work and now I can't get the bootstrap screen, but I can only get to the bootloader now. It seems like I will need to revert back to the old firmware correct? In the AP Fastboot Flash Mode it says the device is locked btw.
villian1998 said:
An update, I tried to re-install the old backup but without system, in which it didn't do anything but eventually came up to the bootstrap screen. It stated that I didn't have su and If I wanted to install the SU binaries.
Click to expand...
Click to collapse
TWRP is used with many devices. With some devices twrp can be flashed before rooting, and then you can root with TWRP, the XT912 is not one of those devices.
When you get not rooted warning in twrp, that almost always means Rom is not bootable or completely missing.
Do not reboot if you get that warning.
It seems like I will need to revert back to the old firmware correct?
Click to expand...
Click to collapse
Yes now you need to flash stock firmware with RSD Lite.
Sent from my XT907 using Tapatalk
---------- Post added at 02:33 PM ---------- Previous post was at 02:29 PM ----------
villian1998 said:
In the AP Fastboot Flash Mode it says the device is locked btw.
Click to expand...
Click to collapse
the XT912 bootloader is not unlockable.
---------- Post added at 02:34 PM ---------- Previous post was at 02:33 PM ----------
villian1998 said:
An update, I tried to re-install the old backup but without system,
Click to expand...
Click to collapse
The twrp nandroid backup includes system and user partitions, if done correctly.
Ok, I'm in the process of using RSD lite
sd_shadow said:
TWRP is used with many devices. With some devices twrp can be flashed before rooting, and then you can root with TWRP, the XT912 is not one of those devices.
When you get not rooted warning in twrp, that almost always means Rom is not bootable or completely missing.
Do not reboot if you get that warning.
Yes now you need to flash stock firmware with RSD Lite.
Sent from my XT907 using Tapatalk
---------- Post added at 02:33 PM ---------- Previous post was at 02:29 PM ----------
the XT912 bootloader is not unlockable.
---------- Post added at 02:34 PM ---------- Previous post was at 02:33 PM ----------
The twrp nandroid backup includes system and user partitions, if done correctly.
Click to expand...
Click to collapse
But the link to get to the recovery firmware for the Razr xt912 doesn't work, do you have another mirror?
villian1998 said:
But the link to get to the recovery firmware for the Razr xt912 doesn't work, do you have another mirror?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=58684545&postcount=2
You sir are a life saver!!
sd_shadow said:
http://forum.xda-developers.com/showpost.php?p=58684545&postcount=2
Click to expand...
Click to collapse
I'm sure I can get it back to normal now.
Thank you so very much
Alright, I'm back again. But this an interesting development. Let me describe the whole process.
I originally rooted using the Saferoot - [Video]Safe Root for Jelly Bean Android Devices like the Droid Bionic 4.1.2 & More @Tomsgt to root again. It worked like a charm. I updated the SU binaries from the updated SU app and placed SU in my system. My next step was to install safestrap 3.75 which I had the apk still on my internal memory and was able to install it successfully. I booted to the recovery and made a back up(which I'm curious to know if it actually worked this time, but I haven't flashed back to yet) which worked flawlessly. Now this time I wiped with just doing a simple dalvik cache wipe and installed CM12 per the directions and Gapps in this thread Official CM12 thread - Official Downloads (XT912). Everything appears to be fine but I noticed that I didn't have SU, I checked to see if the phone was rooted, which the jRummy root checker says no root. I've tried flashing a SU zip from this post Quote:
Originally Posted by andreimoto
i found my razr in cm12 not root...
maybe this is silly question.... then how to make it root?
thanks dude...
https://download.chainfire.eu/396/Su...etrieve_file=1 just flash superSU in ss recovery to gain root access.
So I can't seem to get root access which is bothering me, but not a deal breaker. I've also noticed that when I try to connect to the computer, my computer can't connect to the phone for some reason. So I'm curious to know how I can get root access again? Should I try saferoot again? I hope this is makes sense.....
villian1998 said:
Alright, I'm back again. But this an interesting development. Let me describe the whole process.
I originally rooted using the Saferoot - [Video]Safe Root for Jelly Bean Android Devices like the Droid Bionic 4.1.2 & More @Tomsgt to root again. It worked like a charm. I updated the SU binaries from the updated SU app and placed SU in my system. My next step was to install safestrap 3.75 which I had the apk still on my internal memory and was able to install it successfully. I booted to the recovery and made a back up(which I'm curious to know if it actually worked this time, but I haven't flashed back to yet) which worked flawlessly. Now this time I wiped with just doing a simple dalvik cache wipe and installed CM12 per the directions and Gapps in this thread Official CM12 thread - Official Downloads (XT912). Everything appears to be fine but I noticed that I didn't have SU, I checked to see if the phone was rooted, which the jRummy root checker says no root. I've tried flashing a SU zip from this post Quote:
Originally Posted by andreimoto
i found my razr in cm12 not root...
maybe this is silly question.... then how to make it root?
thanks dude...
https://download.chainfire.eu/396/Su...etrieve_file=1 just flash superSU in ss recovery to gain root access.
So I can't seem to get root access which is bothering me, but not a deal breaker. I've also noticed that when I try to connect to the computer, my computer can't connect to the phone for some reason. So I'm curious to know how I can get root access again? Should I try saferoot again? I hope this is makes sense.....
Click to expand...
Click to collapse
every rom has a separate superuser/binary, root access for stock has nothing to do with a custom rom.
if you can boot to twrp recovery, stock slot should be rooted.
rom slot you are installing cm12 in?
full file names?
verified md5s?
---------- Post added at 04:51 PM ---------- Previous post was at 04:50 PM ----------
How did you move SuperSu to system?
sd_shadow said:
every rom has a separate superuser/binary, root access for stock has nothing to do with a custom rom.
if you can boot to twrp recovery, stock slot should be rooted.
rom slot you are installing cm12 in?
full file names?
verified md5s?
Yes I can boot to twrp recovery.
I installed to internal slot
cm-12.1-20150528-NIGHTLY-spyder.zip
md5sum: e230e1b71b7158c6d89a961e9c6c6087
For GApps, I used these: https://s.basketbuild.com/gapps
Tried this zip for SU https://download.chainfire.eu/396/Su...etrieve_file=1 just flash superSU in ss recovery to gain root access.
Yes verified all MD5s.
Click to expand...
Click to collapse
villian1998 said:
I installed to internal slot
.
Click to expand...
Click to collapse
? slot options are 1 , 2, 3, 4 and stock.
If you installed Mentor.37's you also have a safe slot
Sorry, I'm new to the razr
sd_shadow said:
? slot options are 1 , 2, 3, 4 and stock.
If you installed Mentor.37's you also have a safe slot
Click to expand...
Click to collapse
I've googled and searched on xda about slots for the xt912, but I'm merely confused. So to answer your question I don't really know, but I'll keep searching....
villian1998 said:
I've googled and searched on xda about slots for the xt912, but I'm merely confused. So to answer your question I don't really know, but I'll keep searching....
Click to expand...
Click to collapse
You don't need to search, it says in twrp which slot is selected.
see my [Video] Installing/Upgrading Safestrap 3.75 and Installing a Lollypop Rom
or Tomsgt's [Video]How to install Safestrap 3.75 and Android 5.0.2 Lollipop on the Motorola Droid Bionic, Droid 4 and Droid Razr
Ah, thanks for the clarification
sd_shadow said:
You don't need to search, it says in twrp which slot is selected.
see my [Video] Installing/Upgrading Safestrap 3.75 and Installing a Lollypop Rom
or Tomsgt's [Video]How to install Safestrap 3.75 and Android 5.0.2 Lollipop on the Motorola Droid Bionic, Droid 4 and Droid Razr
Click to expand...
Click to collapse
It's intalled on the stock slot
villian1998 said:
It's intalled on the stock slot
Click to expand...
Click to collapse
try installing on a rom slot