sk 17 screen rotating by itself - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

My screen started rotating by itself!
I flashed it and it didn't helped.
Can somene help me solve this?
TNX

IR123 said:
My screen started rotating by itself!
I flashed it and it didn't helped.
Can somene help me solve this?
TNX
Click to expand...
Click to collapse
this looks klike a sensor prob, but to be sure:
flash the stock ICS.ftf using flashtool with all wipes (dont touch the setting, let flash kernel also)
THAN, boot up that ICS.
problem still exist = your sensor broken in some way, go to tech support.
problem solved = it was a bug of your old rom (can be nearly everwhere, or u just messed it up by doing sth, lol)

Related

[Q] Help x10a screen touch not working after flash

Hi,
I flashed my x10a with latest flashtool with 2.3.3 firmware. The flash was successful, but after the flash it's screen touch is no more working. I thought that there might be problem with the firmware that I used, so I again checked with many firmwares, but none of them solved my problem.
Then I tried to repair my phone with Pc Companion, it says that no software is available for my phone. Also I tried with Sony Update Service, this also said no software for my phone.
I am tired now. I tried all the methods that I found on internet. Isn't there any solution for me now? I know that It's not a hardware problem because before flashing its screen was working without any problem. I know you guys here are expert in android problems. So hope you will help me in this problem? I am from Nepal. There isn't sony service in my country. What is the solution for me? I need your help....:crying:
could you tell us exactly what you flashed with flashtool ?
and what i understand is that your phone DOES work it fully loads up but not responding to your touchscreen ?
and any other info on what you might have flashed ?
it could just be freezing (so it seems like its not responding)
Bjornlindekens said:
could you tell us exactly what you flashed with flashtool ?
and what i understand is that your phone DOES work it fully loads up but not responding to your touchscreen ?
and any other info on what you might have flashed ?
it could just be freezing (so it seems like its not responding)
Click to expand...
Click to collapse
Bro thanks for your reply, I flashed X10a_2.1update1_r2.1.A.0.435_Generic.ftf, X10a_3.0.1.G.0.75_AMERICA-US GENERIC 1233-8200.ftf, and few more firmwares like this. I used flashtool-0.8.0.0-windows_2.exe to flash the phone. Ya you are right my phone DOES work it fully loads up but not responding to my touchscreen
Keys are working well, volume keys, back keys all are working. After flashing finished option comes to choose the language and I can't go ahead than that because screen touch will not work.
me.amar said:
Keys are working well, volume keys, back keys all are working. After flashing finished option comes to choose the language and I can't go ahead than that because screen touch will not work.
Click to expand...
Click to collapse
did your touchscreen worked on 2.1 firmware
as im googling for this problem EVRYTHING leads to software problems.
for example this post
"''The touchscreen on my phone stopped working. Everything else is working (buttons), except the touchscreen. It shows everything but I can't do nothing with my finger.. I've had this problem before, but then it could be fixed by simply taking out the battery and rebooting that way. This time that didn't work. First thing that I tried was factory resetting the phone, clearing all caches, etc. Touchscreen still not working after booting. Then I flashed SonyStyle V1.1 touchscreen still not working. Then I 'repaired' it with SEUS, touchscreen was working fine.""
so the best thing you can do right now is use SEUS to get back to original firmware.
http://sony-ericsson-update-service.en.uptodown.com/
and a guide to help
http://www.esato.com/board/viewtopic.php?topic=171599
if it works then you are absolutly sure its not a hardware problem.
techdevilisnowmonster said:
did your touchscreen worked on 2.1 firmware
Click to expand...
Click to collapse
Before flashing it was working.But after flashing it didn't worked on any firmware
Bjornlindekens said:
as im googling for this problem EVRYTHING leads to software problems.
for example this post
"''The touchscreen on my phone stopped working. Everything else is working (buttons), except the touchscreen. It shows everything but I can't do nothing with my finger.. I've had this problem before, but then it could be fixed by simply taking out the battery and rebooting that way. This time that didn't work. First thing that I tried was factory resetting the phone, clearing all caches, etc. Touchscreen still not working after booting. Then I flashed SonyStyle V1.1 touchscreen still not working. Then I 'repaired' it with SEUS, touchscreen was working fine.""
so the best thing you can do right now is use SEUS to get back to original firmware.
http://sony-ericsson-update-service.en.uptodown.com/
and a guide to help
http://www.esato.com/board/viewtopic.php?topic=171599
if it works then you are absolutly sure its not a hardware problem.
Click to expand...
Click to collapse
Does this works for android phones?
yes the tutorial is just wrong i noticed .
you could just use it as a guideline tough my apolegies

Star N9880 (Upai N9880) Auto rotation error

Hi,
Somedays back My phone just got stuck at the boot animation... So I restored it to its factory rom: upai_n9880I stock rom: 20120804_e1811_v75_jbaol1_g88. But when I went using the camera, the camera was inverted and if I turn in to lanscape, it would rotate but get inverted like in portrait mode. Now the games were also working flipped... The guy in Temple run now turns right if I tilt to the left and so forth.
So I tried flashing the phone with Taiwan upai N9880_ICS_V.01... but the issue remains. I tried reformat the flash and re-installed Taiwan Rom... the issue remians.
Can someone let me know how to fix it. I am new to all this and want to get it fixed if possible
Thanks,
Bharat
Anyone!
Anyone!
Hello
I have exactly the same problem and I would have wanted to know if you found a solution? Thank you
n9977
samiou57 said:
I have exactly the same problem and I would have wanted to know if you found a solution? Thank you
Click to expand...
Click to collapse
Hiya
My android phone which is a a chinese n997 keeps on rebooting and loops I have done the factory reset the delete the cache.
it is a android ver:4.0.9 BB Chip : MT6577 . I dont know what else to do . I am a noob

Xperia U touch issues!!

Hey guys,
I was using my phone, everything ok but SUDDENLY it seems to have some touch issues! Sometimes the touch is unresponsive, for like 0,2 / 0,3 sec. I press and I have to press it again. That's frustrating!! Especially when typing on keyboard!! I thinked that the problem was caused by the ROM ( maybe little lags ) and I changed ROM, but the problem is still alive!! The phone didn't fall, this happened suddenly!!
Can someone help me?
Slender_ said:
Hey guys,
I was using my phone, everything ok but SUDDENLY it seems to have some touch issues! Sometimes the touch is unresponsive, for like 0,2 / 0,3 sec. I press and I have to press it again. That's frustrating!! Especially when typing on keyboard!! I thinked that the problem was caused by the ROM ( maybe little lags ) and I changed ROM, but the problem is still alive!! The phone didn't fall, this happened suddenly!!
Can someone help me?
Click to expand...
Click to collapse
Clear cache/ dalvik cache/ factory reset and see if this helps.
Also, did you dirty flash your ROM ? This usually happens if you dirty flash a ROM. Always start fresh.
Secondly, if you made backup and trying to restore it, that might cause the problem.
Hnk1 said:
Clear cache/ dalvik cache/ factory reset and see if this helps.
Also, did you dirty flash your ROM ? This usually happens if you dirty flash a ROM. Always start fresh.
Secondly, if you made backup and trying to restore it, that might cause the problem.
Click to expand...
Click to collapse
I tried to wipe.. but same issue. I always did the wipes before flashing a new ROM, so I think the installs were always clean. I tried to flash a firmware with flashtool, but same result..
Is there a solution for this? Now I'm trying to flash Gingerbread firmware, but I think the problem will remain..
Slender_ said:
I tried to wipe.. but same issue. I always did the wipes before flashing a new ROM, so I think the installs were always clean. I tried to flash a firmware with flashtool, but same result..
Is there a solution for this? Now I'm trying to flash Gingerbread firmware, but I think the problem will remain..
Click to expand...
Click to collapse
Well, 0.2 seconds is a very small delay. However, if the problem persists, I suppose you should check typing speed/sensitivity in settings.
I suspect you have alot of applications in your phone and Xperia U has only 512 RAM which is not enough to run JB smoothly.
Hnk1 said:
Well, 0.2 seconds is a very small delay. However, if the problem persists, I suppose you should check typing speed/sensitivity in settings.
I suspect you have alot of applications in your phone and Xperia U has only 512 RAM which is not enough to run JB smoothly.
Click to expand...
Click to collapse
Nope.. I know that our device can not run lot of apps, in fact I have just some apps, no Facebook and something like that..
Anyway, for example, I did a touch screen test : it works in all zones, but, if I touch the screen 10 times, only 7 times can be "received" from device
Slender_ said:
Nope.. I know that our device can not run lot of apps, in fact I have just some apps, no Facebook and something like that..
Anyway, for example, I did a touch screen test : it works in all zones, but, if I touch the screen 10 times, only 7 times can be "received" from device
Click to expand...
Click to collapse
Maybe the digitiser is having some sort of problem. This is usually caused by humidity / water in your phone in small amount . I hope I'm wrong.
Clean your screen thoroughly and remove screen protector and use ultra thin protector instead. See if that helps. On my devices smudgy screen has problems with touch .
Same issue here
Im also having same issue here..
it is taking only 6 out of 10 touches. a few regions not responding to the touch
same problem with me, i hope some people give best solutions for this issue
Maybe it's caused by charging the phone with non-official chargers. It overcharge all the hardware and can easily damage it.
Anyways if you have warranty you can flash the original ROM, relock the bootloader and bring it to Sony.

Landscape rotation wrong direction

After installing CM13 update, my phone stucked in bootloop. So i decided to back to old version. Then problem starts. Phone is rotating wrong in landscape mode. Need to use rotation controller to solve this. But its annoying. I was trying to calibrate using compass, using OS3 with *#808# selfcalibrate, nothing helps. Rebooting doesnt help aswell. Any ideas whats happened
Screens:
https://www.dropbox.com/sh/5qfgbgwot...xlouFHMla?dl=0
Do you have the same issue when you flash another rom? In my opinion something weird happened during flash, so maybe Clean Flash will help?
Yes, same issue on CM13 nightly, CM14, OS3.
Did you tried the Maps resetting?
https://support.google.com/maps/answer/6145351?hl=en
Or last chance :
https://forums.oneplus.net/threads/...rometer-magnetometer-gyroscope-sensor.405894/
Kéno40 said:
Did you tried the Maps resetting?
https://support.google.com/maps/answer/6145351?hl=en
Or last chance :
https://forums.oneplus.net/threads/...rometer-magnetometer-gyroscope-sensor.405894/
Click to expand...
Click to collapse
Tried both. Nothing happened.
And an app like that :
https://play.google.com/store/apps/details?id=asd.vector.sensor
Tried on OS3 with dialer code *#808#.
RIGHT-HORIZONTAL-VERTICAL POSITION(ideal angle should be 90 degree) and LEFT-HORIZONTAL-VERTICAL POSITION(ideal angle should be 270 degree)
Click to expand...
Click to collapse
are Right 270 and Left 90
Problem solved. Downloaded stock rom and stock recovery. Flash. Unroot. Then I did all auto update to 3.1.3. And all work perfect.

Madsurfer's eUI 5.9 ROM 21s - fingerprint problem

Hello everyone,
at first - best ROM I ever tried!
Just one big problem for me:
When the screen is off (sleep mode), I CAN NOT unlock the phone with fingerprint - during first 5 seconds - when display is off, it works. I have to turn on display with power button and AFTER that I CAN unlock with fingerprint with no problems. I want to unlock my phone with fingerprint when the display is off even more than 5 seconds.
Is there a solution?
In stock ROM (16s International) everything works perfect, there were no time limitation. Fingerprint worked everytime even when screen was off for 10 minutes for example.
Where is the problem? It is no hardware problem for sure.
Someone said to use the same finger 3 times instead of 3 different fingers. Try it. It may solve your problem.
I am using the same ROM without the problem which you experienced although sometimes it took more than a second or required a couple of taps on the sensor to unlock the screen.
Go to settings, battery, power saving managements and see if the Ultra Long Standby During Sleep is turned ON. I have that disabled.
Edit. Sorry, I thought that you had the manufacturers' ROM. I had the factory ROM.
I have the same 3 fingerprints for better recognition for sure, but this tip did not help me.
Also I tried to turn off the Long sleep too, did not help to solve this.
Any other ideas @madsurfer1? With screen ON works flawlessly.
Hi guys
I'm experiencing exactly the same issue with my fresh received x829. Haven't tried much on stock ROM but apparently everything was working. Then I flashed AOKP and lignage os v13, and with both the fingerprint only works in the 5 seconds after screen off. And when I mean works, I mean detect a finger, if it's the good one unlocks and if not shows an error. After 5 seconds, the phone shows nothing at all, no unlock and no error.
Have you had any success since these posts ?
Regards
AOKP on my x829 has fingerprint "working" from sleep. It sometimes takes a while or multiple attempts though.
Thanks bwalter
@Razor99 any news on your side ? Looks like only you have the exact same issue I encounter.
same problem
bolof2 said:
Thanks bwalter
@Razor99 any news on your side ? Looks like only you have the exact same issue I encounter.
Click to expand...
Click to collapse
hi
i have the same problem with most of the roms,
is there any solution?
My solution was full wipe, including internal storage. After than clean install ROM. With these steps fingerprint begin works even in deep sleep mode.
Keep in mind that Max 2 has very bad fingerprint at all on every model compared to premium brands. It is slow and sometimes react after few attemps. But works.
If theese steps wont help you - proove claim to the seller of your mobile.
If fingerprint is your priority, I strongly recommend another model, except Le Max 2. Maybe Le Pro is now better with fingerprint.
Try it and let us know.
https://forum.xda-developers.com/showthread.php?t=3408395
Flash latest CN 23S modem, fp problem bye bye!
hackerpower said:
Flash latest CN 23S modem, fp problem bye bye!
Click to expand...
Click to collapse
Indeed hackerpower, I saw your post on the other topic https://forum.xda-developers.com/le-max-2/how-to/le-max-2-finger-print-t3408395/page16#post71613937 and for me, that did the trick, without flashing another rom or wiping anything.
Thanks a lot!
bolof2 said:
Indeed hackerpower, I saw your post on the other topic https://forum.xda-developers.com/le-max-2/how-to/le-max-2-finger-print-t3408395/page16#post71613937 and for me, that did the trick, without flashing another rom or wiping anything.
Thanks a lot!
Click to expand...
Click to collapse
glad I could help!
how do we flash modem only? i want to try the 23s china modem
updiliman said:
how do we flash modem only? i want to try the 23s china modem
Click to expand...
Click to collapse
Download under China folder (23S v0033 I think), link for download in this post: https://forum.xda-developers.com/showpost.php?p=71613937&postcount=151
Flash the modem zip file by Twrp recovery.
Moon75 said:
Download under China folder (23S v0033 I think), link for download in this post: https://forum.xda-developers.com/showpost.php?p=71613937&postcount=151
Flash the modem zip file by Twrp recovery.
Click to expand...
Click to collapse
Flashed the 023S modem and BAM! it works!!! Thanks a lot!
For me, I found flashing the dev 66 modem fixed this wake problem.

Categories

Resources