[Q][XU] Trouble with phone (APP) - Sony Xperia P, U, Sola, Go

Hello people,
I have rooted my xperia U phone and flashed a custom ROM. Everything went fine.
But now, 2 days after that, I have trouble with the phone app.
I can't accept calls (the app freezes) and can't call someone really, since the screen doesn't change into the "phone mode". So I choose f.e. someone in my recent calls, press to call, but I don't see if the person gets really called, since I don't see the screen with the "end call" button etc.
Also it makes no sounds. But the callled person is getting the call, so that he can answer.
After 10 seconds I see this "phone mode", but it's really a huge problem.
I hope you can help me to solve it.
Regards,
YEA

Try doing a clean install of your ROM Or try anothar custom rom
Hit thanks if i helped you

use non stock roms like CM or Slimbean roms

Related

[Q] [crDroid 15.2] SecPhone.apk is mute after reboot

Hey guys,
i really really need your help, i´m running out of ideas over here
A few days ago i installed crDroid 15.2 on my Galaxy S3 (amongst other things i chose the boeffla 3.10-beta2-Linaro-kernel and a modified SecPhone.apk during the installation with AromaInstaller). I did all the configurations and was pretty happy to eventually have found my perfect custom rom. AutoRecord, no-delay etc.: everything worked very well until i had to reboot my phone for some reason.
Problem was now that i couldn´t neither hear the caller nor the person i called (in fact there hasn´t even been a dialing signal before the connection was established, everything mute from start to the end) while they could hear me perfectly fine. Trying the speakers didn´t work, too.
Making calls with Skype worked, though, and every other "sound producing" app was able to do so. I also could hear the "call signals" (i have to translate here, in german it´s called "Anrufsignal"), but not the actual dialing signal. By call signals i mean the notification-sounds that you can set to know when the connection is established and closed again (there was a third signal, too, i think it was a beep every minute or so...).
Long story short:
I tried to reinstall with a new Kernel (non-Linaro, Stock XXEMB5), unmodified SecPhone.apk and another modem in different combinations, but that didn´t do it.
Even a hardreset (which included a system- and SdCard-wipe, so mobile was superclean) followed by a reinstall didn´t work, the problem persists. Phone works fine until first reboot.
Now i got back to a rooted stock rom (filename: I9300XXEMC2_I9300DBTEMC1_I9300XXEMC2_HOME.tar.md5) and experience no problems so far, but i really appreciated my (nearly) perfect custom rom and would prefer to use it as soon as possible
I already tried google and the search on this site, but it seems that nobody else ever had similar problems, so you are my last hope to make it work :/
Thanks a lot for your help

[U] Stock ROM bug or something else?...

I have a problem in my U.
Everytime someone calls me, first the led lights up, then it vibrates about 2-3 times in the middle starts ringing and only after all that the screen turns on so i can answer or reject the call.
After i answer a call sometimes it takes 3-5 sec to hear sound from the other phone, but the caller says he can hear me the whole time.
When receiving SMS, first the led lights up, then after a while it vibrates and after that it rings, but sometimes it doesn't ring.
Another thing, it lags to much to open the contacts, phone and messages app.
My wifes Tipo dual, opens almost instantly the phone app after i touch it.
I'm using The ROM, etc that are stated in my signature.
Please help!! Already tried different kernels, etc. :crying:
It can be something in the mods or it can be the rom itself.
Didi you get these bugs before the mods?
The stock rom sucks, mine did this as well, made the phone unusable.
mirost1 said:
It can be something in the mods or it can be the rom itself.
Didi you get these bugs before the mods?
Click to expand...
Click to collapse
Already had the excessive lag opening the apps with a fresh stock ROM. Honestly i put and did so many things that i don't know now.
But i installed the Sliding XU 3.3 kernel and it's working almost fine now, only has the original lags opening the apps of the stock ROM.
theronkinator said:
The stock rom sucks, mine did this as well, made the phone unusable.
Click to expand...
Click to collapse
So wich ROM do you use

[Q] Screen turns on in pocket during call with headset?

Hello Everyone.
Wonder if anyone can help me as I think I am going mad!
I use my headset all day (listening to podcasts) and whenever i answer a call, I have to remain very still for fear i will hang up (which happens regularly).
I have had the same problem on many roms - Omega, Temasek, Cyanogenmod, Foxhound and many more, its driving me crazy.
I have also installed proximity service and an app which I cant remember the name of at the moment, but will update when i find out. Needless to say, nothing has worked, the screen always comes on when a call comes in.
Does anyone have any idea what i can do to sort this, i never need my screen on when my phone is in my pocket.
PS I have tasker, maybe i can use that to sort it?
Thanks for any input
JimmyMagic said:
Hello Everyone.
Wonder if anyone can help me as I think I am going mad!
I use my headset all day (listening to podcasts) and whenever i answer a call, I have to remain very still for fear i will hang up (which happens regularly).
I have had the same problem on many roms - Omega, Temasek, Cyanogenmod, Foxhound and many more, its driving me crazy.
I have also installed proximity service and an app which I cant remember the name of at the moment, but will update when i find out. Needless to say, nothing has worked, the screen always comes on when a call comes in.
Does anyone have any idea what i can do to sort this, i never need my screen on when my phone is in my pocket.
PS I have tasker, maybe i can use that to sort it?
Thanks for any input
Click to expand...
Click to collapse
Try Gravity box-power settings-the last two options

[Q] Can't hang up calls?

Hello everybody,
I just recently flashed SuperNexus 3 (AOSP 4.3) On my i9300.
I have only one problem, and that is that I can't seem to hang up an active call.
It goes like this sequence:
1. dial a number
2. person picks up, everything is fine because he or she can end the call too.
3. in the event that the other end does not pick up the phone, the fun begins.
4. I'd like to hang up the call because there is not much to a voice mail.
5. I press the red phone button, whichs turns gray.
6. My phone goes back to the launcher, but says that there is an open call to be hung up.
7. The call can't be hung up so I end up having tor restart the phone.
I'd like to try a different kernel, but there are not so much 4.3 kernels out yet.
Any help would be extremely much appreciated!
Weird stuff is to be expected with beta releases, best ask in your rom & kernel threads if anyone else has similar issues.
I have this problem sometimes on my GS3 but also my grilfriend has the same problem on the HTC ONE X, it doesnt happen all the time but it does happen now and again, im on stock rooted rom and my gf in on plain old stock.
So maybe something to do with Android
Thanks for the answers. I will post in the threads once I get 10 posts, but I don't want to spam
FistFull95 said:
Thanks for the answers. I will post in the threads once I get 10 posts, but I don't want to spam
Click to expand...
Click to collapse
Wipe phone and flash again
Reflashing did not work, I flashed Paranormal Android and everything seems to be fine now.
FistFull95 said:
Reflashing did not work, I flashed Paranormal Android and everything seems to be fine now.
Click to expand...
Click to collapse
u mean paranoid android ?
Yes, sorry.

Phone will not ring when locked on stock lockscreen

Hello!
I recently switched to the m4 from my trusty LG OG, an it is perfect except for one thing... it doesn't ring.
I have tried all Sony-solutions, including PC software repair, etc... but no joy. My wife also has an M4 and has the same problem.
It is worked-around by using a 3rd party lockscreen (I use Hi-Locker), which is awesome.. but not ideal due to security problems, most notably Android Pay.
My question?
Can I replace the lockscreen at the ROM level? Can I replace the basic function with maybe a lockscreen from the Z5?
Unless someone knows how to fix this
I have never compiled my own rom, but I have a reasonable level of tech-savvy. I can flash ROMS and do work in Linux.
I have rooted and unlocked my bootloader, and I am using Stock Sony ROM
I have the latest firmware
Kernel 3.10.49
build 26.1.A.2.99
I have NOT tried using an old firmware- or an alternate ROM. I probably will, but my wife doesn't love the idea for her. Thus, I would like to work out a precision fix.
My thoughts?
Idea 1. find where the stock lockscreen/security module lives.. and try and replace with something from a different phone.
Possible?
Thank you for reading.. I know some other people have these problems, as I read them in threads here.. but I didn't find much in the way of fixing.
just for reference- THIS is the problem.
just for reference- THIS is the problem.
Mustang243 said:
My phone doesn't ring when it 's locked. If phone is unlocked ringtone rings and vibrates. When it's locked no sound or vibrate. Whatsapp messages vibrate but they have no notification sound. I have checked all the settings, volume is up. Last resort is factory reset but i'm not there yet. I don't wanna lose all my settings.
E: Okay I used Sony PC Companion and used the Fix phone/tablet -thing and it downloaded the firmware and installed it so I think it reset my phone. Still my phone doesn't ring if its locked. If I press the power button when someone is calling to me, I can see the lockscreen notification on the screen but it doesn't ring or vibrate. FFS. Any ideas guys?
E2: I guess I find a solutions. Or a temporary solution. I noticed that if I disabled the screen lock, my phone would ring and vibrate normally. So I decided to try and download "Next" lockscreen app. Guess what. When I use it, my phone works perfectly. I don't know why it stopped ringing because there wasn't any new updates from Sony but it's clearly problem in Sony's software.
Click to expand...
Click to collapse
Mustang243 said:
I still have the "silent phone" issue with this update. I have to use third party lock screen app. If I use Sony's lock pattern or pin code and use my gf's phone to call my phone: screen doesn't wake, no ringtone can be heard and no vibration. When I press power-button I can see that someone's trying to call me. Anyone else experiencing this problem? I hope you understand what I tried to say, the issue is kinda hard to explain.
Click to expand...
Click to collapse
Yeah this is a huge problem and we're not the only ones suffering from it. Now I use CM Locker because Next drained my battery. I also noticed that my phone works fine if I boot on safe-mode. Still haven't figured it out which app causes the problem. Gotta wait for the 6.0 update and hope that fixes things.
Same issue with out-of-the box...
Well, have M4 'out of the box' - meaning - no custom software installed, no customized ROM, no custom lock-screen... and well - to make the ring work back I have to restart phone every few days (as soon as realize that it's not working) - oh Sony, what should I say ....

Categories

Resources