iam install zendrokat on my wave s8530
and it is nice but after 2 day my mobile is dead (dont boot to android )
but install zendrokat agin but dont install hapen E:format_volum make_ext4fs failed on dev/block/mmcblk1p3 error while formating /system !
and install bada but dont install when flash file factory error (ERR : FFS FORMAT )
i think NAND IS dead i need format nand to install bada or android again
Sloved prople
tell me or Mr.BenzoX to help you
pllllllllllllllllllllllllllllllllllllllllllllz i need help mee
Maybe more details...
Firmwareversion for bada?
For me in Germany XXLA1 is good idea...
If you have changed Bootfiles for Android, then maybe your Firmware needs Bootfiles from Firmwarepackage... Sometimes partition different...
Windows Version?
XP ?
7 ?
8.1 ??
Multiloader Version ?
ML 5.67 ?
5.64 ?
Best Regards
Try flashing bada again and then try!
And did u clean bada through recovery?
In Recovery go to
Zen settings>open recovery script>clear_bada_for_android_nand, press that, it will clear whole bada and u will space for android!
Or try formating system from mounts & storage and then try.
Romancy said:
iam install zendrokat on my wave s8530
and it is nice but after 2 day my mobile is dead (dont boot to android )
but install zendrokat agin but dont install hapen E:format_volum make_ext4fs failed on dev/block/mmcblk1p3 error while formating /system !
and install bada but dont install when flash file factory error (ERR : FFS FORMAT )
i think NAND IS dead i need format nand to install bada or android again
Click to expand...
Click to collapse
Open recovery mode -- Full wipe data -- yes
After , You can use the Android os on wave
when mount system ERROR MOUNTINIG SYSTEM !!
and flashing bada ERROR FFS FORMAT
and clear bada via script dont solved and dont delete file in nand and my memory is dead when clear bada via script
and flashing bada ERROR FFS FORMAT
Click to expand...
Click to collapse
Again, about bada...
If wrong Bootloader, then partiton table/info is different...
So which Firmware you try?
With Boot or without?
And here:
http://forum.xda-developers.com/showpost.php?p=49740223&postcount=3
Best Regards
Romancy said:
when mount system ERROR MOUNTINIG SYSTEM !!
and flashing bada ERROR FFS FORMAT
and clear bada via script dont solved and dont delete file in nand and my memory is dead when clear bada via script
Click to expand...
Click to collapse
I had every kind of problems during installing, changing rom verison from CM to ZendK, from ZendK to CM..
some time i thought that my phone was hard bricked ore something like that...
trust me, insist! be strong, don't leave. use "search" option, try different bada versions (s4 style turko saved me)
try multiloader from different pc
try find your problem in different forum pages
you will resolve soon!
http://forum.xda-developers.com/showpost.php?p=20534612&postcount=15
Here you can find LinkS for bada Firmware...
http://netfolder.in/folder.php?folder_id=SWFbK6M
For S8530...
So again, what you have tried?
bada 1 or 2 or 3 or 4 or...
Try this one and report:
S8530XXLA1_v2.0_DBT.zip
Use ML 5.67
Btw., as info...
You have 2 types of NAND...
512 MB OneNAND
2000 MB moviNAND
Best Regards
plllllllllllllllllllllllllllllllllllllllllllz
iam tell Tigrouzen but he tell me my NAND is dead
i want to install any OS on SD card i need eny OS my mobile now is dead plllllllz help me
and iam flashed bada 2 and bada 1.2 but dont solved pllllllllllllllllllllllllz help
plllllllllllllllllllllllllllllllllllllllllllz
Click to expand...
Click to collapse
Please open your eyes and try to answer... MORE precise...
Use Screenshots if you are not able to answer...
Here is bada Firmware Collection = MANY files to try...
http://netfolder.in/folder.php?folder_id=SWFbK6M
How to help you, if you ignore MANDATORY Basics...
1.
WINDOWS VERSION?
XP, 7 or 8 or what ever?
2.
Multiloader Version?
5.62 or 5.64 or 5.65 or 5.67 or what ever?
3.
Firmwareversion EXACT f. few Chars...
XXLA1 DBT ? Or ?
4.
Be sure you know what you do...
If FFS not work, then check if CSC and/or ShpApp.app
You not need for tests to select all files...
Look here, Screenshot of ML...
http://forum.xda-developers.com/showthread.php?t=1732287
Best Regards
i have win 7 and multiloader v5.65 and 5.67 and 5.62 and i have bada 2 custome room and stock room and i have bada 1.2
but all this dont solve any thing happen ERROR FFS FORMAT (NAND IS dead )
i need any OS even if on SD (live SD ) and i want recovery nand to install bada again i want help me and thanx all XDA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same test again, but this time use:
1.
Multiloader 5.67
2.
Use Stock/Original stuff like this one:
S8530XXLA1_v2.0_DBT.zip
3.
Round 1.
All files select...
If again FFS
Round 2.
Select all files again, except FFS
NO FFS this time.
Post result if success...
If CSC or SHP App also fail, then deselect them too...
Post result..
Summary:
- ML 5.67
- Use Original files instead Custom Firmware to prevent funny sideeffects...
- deselect FFS...
Only if all 3 FFS + CSC + SHP App fails, then you have an bigger problem...
Good luck.
Best Regards
can be use this now S8530XXJKA or 8530BOLD1_S8530CROLK1_CRO_Full_D-A-CH or NO
error CSC + SHAP + FFS dont write can you help me now or dont solved for ever
CSC + SHAP + FFS...
Click to expand...
Click to collapse
You mean if you flash only CSC = NO
If you flash ONLY SHP = NO success ?
Best Regards
iam flashed CSC only = NO
SHAP only =NO
FFS only = NO
All files = NO
Romancy said:
iam flashed CSC only = NO
SHAP only =NO
FFS only = NO
All files = NO
Click to expand...
Click to collapse
u should try bada 1.2 firmware ,
it may flash successfully.
if still err , than try with different pc , windows xp/7 etc.
the reason behind why i use sd rom is , it no affect bada , and also faster if u have good sd.
ok i will flash on Xp and tell you again but Stay with me to solved this proplem plllz
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CHANGELOGS/FIXES/UPDATES/ADVICES IN POST #2
------------------------------------------------------------
Well, after weeks of work, trials and errors, installs and reinstalls, I managed to rip MarkinuX wonderful build, re build the ROM completely, and managed to fix all the issues in it..
I tried to contact Markinus many times asking him for permission to post the rebuilt ROM, but he just did not reply, looks like he is busy with his studies...
Will remove the post immediately if I get any reply from him stating his disapproval...
Fixes done so far:
1-Fixed data issues.
2-Fixed non English characters shown as " ????? "
3-Added APN data base.
4-Fixed SD card mount/unmount issue
5-Fixed Disk Drive issue
6-Fixed htc Sync
7-Fixed internet pass through..
8-Added Battery %.
9-Added Arabic support
10-And more........
Big Thanks to:
Markinus: for the wonderful idea of having a Desire HD build without SENSE which made it SUPERFAST...
Rafpigna: for allowing me to use his wonderful 1.8 OC kernel and framework-res files...
Dandiel: for allowing me to use his initrd.gz files...
Noellenchris: for his co-operation and advices...
Cotulla: for all what he has made to make the HD2 the best ever...
My beta testers: Emran Waqad + Others...
Technical info:
ROM: Desire HD 1.72 without SENSE for SD use only [hareT] + [MAGLDR]
Kernel: Rafpigna 1.8 OC
How to Install:
1-Download the ROM VERSION 1 VERSION 2
2-Unzip using 7Zip
3-Put the folder on the root of your SD card
4-Download your desired data.img size from the attachments and unzip it into your ROM folder.. (1 GB)-(2 GB)..
5-Run CLRCAD then Haret..
What's working
Everything as shown in the screenshots, apart from two things:
1-SENSE ( removed completely, you can use any alternative launcher)
2- Video Recording/Playback in 720, I guess everybody knows this
Screenshots
DOWNLOAD Jaguaralani HD2 DHD Special VERSION1
DOWNLOAD Jaguaralani HD2 DHD Special VERSION2
FOR MAGLDR USERS
CHECK THIS POST-Thanks to endallas
Click to expand...
Click to collapse
((( ChangeLog - Fixes - Solutions - Advices - Recommendations - Updates )))
ChangeLog - Version 2 ONLINE
1-Back to Stock Battery ( Green Icon ).
2-Fixed Browser Issues ( Using Miren Browser as default ).
3-Added Advanced Power Menu.
4-Added Original hTC Lock Screen.
5-System Tuning & Tweaks for faster booting, better market downlaod.
*******************************************************
To change battery icon, you can download either:
STOCK GREEN ICON
BLUE/GREEN ICON WITH %
CIRCULAR ICON WITH %
USING ROOT EXPLORER, DROP FRAMEWORK-RES FILE INTO SYSTEM/FRAMEWORK, THEN RESTART.
*******************************************************
If you still want the original BROWSER (FIXED), DOWNLOAD THIS, and replace the two files accordingly (Do it manually using root explorer).
*******************************************************
For Faster SD READ/WRITE, I recommend downloading SD SPEED BOOST from Market, set the cache to 2048.
*******************************************************
If you encounter DIALER HANG UPS / ROBOTIC VOICE, Disable Vibrate + Audible Touch Tones + Vibrate Feedback in SETTING/SOUND.
And activate speaker once then deactivate during your first call.
*******************************************************
Kernel Update to RAF 1.9 OC ( With EB ) 23-March-2011
Download the Kernel (Attached) Unzip
Copy ZIMAGE to ROM folder
Copy the other folder to the ROOT OF YOUR SD CARD
Restart
*******************************************************
CONFIG.TXT
ppp_mode = ( 0 for RMNET - ( 1 for PPP )
gps_zone = ( your gps region )
boot_mode = (1 for haret - 2 for MAGLDR )
data_img = (1 to use the data.img that you have deopped into ROM folder )
*******************************************************
If you encounter Browser force Close - Download THIS BROWSER and replace it into root/system/app or use another browser like DOLPHIN/SKYFIRE...etc
*******************************************************
Do not change the folder name, just keep it as it is, even if you change the name in startup.txt, it will not work because it is
hardcoded into initrd.gz.
*******************************************************
I recommend using THIS VERSION OF FLASH PLAYER with this ROM
*******************************************************
For MAGLDR USERS - CHECK THIS POST - Thanks to endallas
*******************************************************
If you encounter high battery drainage:
- Use SetCPU, change progile to smartass+set on boot.
- Make sure to do a full sync with your Google account.
- Activate GPS and get your location.
*******************************************************
NiCE!! thanks for this.. downloading for sure
Very nice job let me try the 720p Video Recording.
Thank for your hard work.
thanks jaguaralani
أخوك ربيعة بن نزار
great news, is there a MAGLDR ver ?
I am dual boot with WP7
THX jaguaralani
207 Bytes ?
Could you please fix download link .
Yes NAND version pliz.I remember ...if i`m not mistaken, you used to make good clocks for win 6.5 .So this shud be good as well!!!
lsherif said:
Could you please fix download link .
Click to expand...
Click to collapse
there is nothing wrong with the download link, download it and unzip then u can find the real download link inside the unzip file
kernelbase said:
207 Bytes ?
Click to expand...
Click to collapse
That's right. The file (207 bytes) Download, unzip, open the txt file. In the txt file find you the download-link
gilla87 said:
NiCE!! thanks for this.. downloading for sure
Click to expand...
Click to collapse
Welcome......
sbdop said:
Very nice job let me try the 720p Video Recording.
Thank for your hard work.
Click to expand...
Click to collapse
Read Post #1 well, 720 is not working !
abusaaad said:
thanks jaguaralani
أخوك ربيعة بن نزار
Click to expand...
Click to collapse
ganjaweed said:
Yes NAND version pliz.I remember ...if i`m not mistaken, you used to make good clocks for win 6.5 .So this shud be good as well!!!
Click to expand...
Click to collapse
Markinus has his own NAND Version, Sorry I don't use NAND, I need WM6.5..
andrio said:
I don't know why it have to zipped, and write on text file
but anyway, good job Jaguar , downloading now....
Click to expand...
Click to collapse
Just to know the number of downloaders, please edit your post and remove the link... I know how to post links myself if I want to ....
vua777 said:
great news, is there a MAGLDR ver ?
I am dual boot with WP7
THX jaguaralani
Click to expand...
Click to collapse
Hi Jaguaralani,
I guess there are many among us who want to try your fast and lean build with MAGLDR.
Any chance??
Pleeaase
pronor
pronor said:
Hi Jaguaralani,
I guess there are many among us who want to try your fast and lean build with MAGLDR.
Any chance??
Pleeaase
pronor
Click to expand...
Click to collapse
I don't use MAGLDR myself, still enjoying WM 6.5, anyway, you may try running it through MAGLDR, I guess the initrd.gz supports it ( not sure though )...
Waited for so long...
Will try it immediately.
Thnx for ur hard work!!
Hi m8...nice to see your new work.....
Your build probably its runing fine on MAGDLR since you are using Dandiest init..
I am out and I can't test it but if anyone can please test and report back
Sent from my HD7 T9292 using Board Express
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here we go...
Today i can show you guys a working MIUI v4 ROM for the Google Nexus One !!!
After the first inofficial HTC Desire Release we have here a brand new inofficial Release for the Nexus One.
There are some small issues at the moment with this ROM but i will see to clear the open failures in the next weeks.. Most Problems are coming from the ICS Kernels at the moment for the N1.. they are not working totaly 100%
YouTube VIDEO : http://youtu.be/WTDtWSSyRts
Lets start...
U need to install the new MIUI v4 the new BLACKROSE Bootloader with a new "Hboot" !!!
If u dont have the Blackrose Bootloader installed u have to install this first..
u will find the instrctions here --> http://forum.xda-developers.com/showthread.php?t=1270589
U need also one of the following RECOVERY to install that ROM :
4EXT Recovery
ClockworkMOD Recovery
AmonRA (Softkeys only| no Touch)
BLACKROSE Edition
MIUI-GER_v4_A2SD-D2Ext_2.2.17-Rev2_N1_4.0.3
Link : http://goo.gl/grTkp
MD5 : A3A5729D93DD335D722A6AEF14C61A6D
what is NOT working ??
working camera ( no Preview )
no FM Radio
no USB Tethering
whats INSIDE ???
based on MIUI v4 2.2.17
based on Evervolv ICS Tiamat 2.6.38.8
add more smoothness to framework
add 4way reboot menue
add init.d tweaks
Full HW Acceleration
gps fix
add new ramdisk
add ad2sdx method
add native a2sd method
add custom installation method with AROMA
add some custom apps
EXT 3/4 Partition min. 512MB
load Parted Magic here and burn it with imgburn here
or u get Linux Live USB Creator to make a bootable Linux USB-Stick.
boot with this CD inside your CD-Rom Drive or put the USB-Stick with Parted Magic in your USB Slot and boot up the System from there.
Connect your SD (in your Phone with the sd mount option in Amon RA) or with a Card Reader with your PC*
Format your Compled SD in Fat32 and start create Partitions:
*example:*
Partition No.1 = xx GB Fat32 (xx = whatever you want)
Partition No.2 = 1 GB EXT2/3/4 (Apps Partition)
Partition No.3 = 200 MB EXT3/4 >> 1/5 Size of Partition No.2 *Minimum << ( if it´s EXT2 the D2SD Script will Format it to EXT3 ) *
Partition No.4 = 128 MB Linux Swap
percental bigger or smaller partitions are possible but not bigger as 2 GB
after that Reboot in your Normal PC System, put the Rom on SD and Flash it like any other Rom...
Click to expand...
Click to collapse
have fun with this Beta.Release...
ATTENTION : This ROM ist not official..its a BETA ROM .. so flash it on ur own risk .. there will be no direct support.. this ROM will be updated from time to time..
CREDITS to :
Kalashnikitty (sMIUI)
Evervolv - ICS Tiamat
Amarullz - AROMA Installer and ad2sdx
rapmv78 - Camera libs
Lennox (miui-au) - Ramdisk, a lot of help and smali hacking
MIUI - for MIUI v4
sebastiaan15 - aroma installer scripts
Andy25 - german translation
Chillzz - german translation
woSaa - splashscreen / bootanimation / banner and downloadbutton
Tiamat - Kernel and HWA hack
MIUI COMMUNITY
Yeah! Great job
* reserved for more informations *
How bout hardware acc? Anyway, good job, might flash this if its fully working.. Already tested on Galaxy S, now waitin to test on N1...
*beep**beep* IMDriving...
Wow,MIUI Germany rock !!!!Go Go Go .Let's try it
is HW acceleration working?
Any information on hardware acceleration? I'm willing to move to MIUI for awhile if this has H/A
i did not understand the install process...is it i have to install bootloader mentioned by blackrose or the bootloader u have mentioned...can u give me step by step process..
thanks!
I've just flashed this rom... it runs less than smooth... look 4ward to your next update to fix things up
sunil1981 said:
i did not understand the install process...is it i have to install bootloader mentioned by blackrose or the bootloader u have mentioned...can u give me step by step process..
Click to expand...
Click to collapse
The Blackrose bootloader and the custom hboot posted above are 2 seperate things. Install Blackrose with linked instructions. Then you can fastboot flash the custom hboot with the commands in OP.
I Love MIUI but i will wait for more stable version ....
Well Done !
happyppn said:
I Love MIUI but i will wait for more stable version ....
Well Done !
Click to expand...
Click to collapse
yep, me too.
Is it possible for Miui v4 to run smooth on N1 ? Or will it always be laggy ?
How to fix static ip? when i connect to wireless, It haven't ip.
den_breacker said:
yep, me too.
Is it possible for Miui v4 to run smooth on N1 ? Or will it always be laggy ?
Click to expand...
Click to collapse
In theory, everything works
How do I get a2sd to work? I don't seem to have as much internal memory as you do.
Thanks
Awesome work. Looking forward...
Full HW accel is not working on any N1 ICS rom--need 3.0 kernel
believe the other ICS roms are using gpu drivers and very smooth and fast
still a WIP and impressive effort from all the devs
Download blackrose 111231,
Place on desktop our anywhere,
Go to terminal
Goto blackrose_111231 directory and type
chmod a+x BlackRose
./BlackRose
sunil1981 said:
i did not understand the install process...is it i have to install bootloader mentioned by blackrose or the bootloader u have mentioned...can u give me step by step process..
Click to expand...
Click to collapse
Sent from my Nexus One using XDA App
thatguyzx said:
The Blackrose bootloader and the custom hboot posted above are 2 seperate things. Install Blackrose with linked instructions. Then you can fastboot flash the custom hboot with the commands in OP.
Click to expand...
Click to collapse
@sunil1981
The above is what you want to do. Read the Blackrose thread and understand what it is and what it allows you to do.
You must also be familiar with fastboot commands. That thread will help you in that regard too, if you are not familiar with fastboot.
Don't get into this if you haven't read up or understand this.
If you are fastboot savvy Blackrose will be easy to understand and implement--
Trackball wake not work, could you help :-s
Fire Rom for Wave S8500
V1
This Rom is based on the AOKP Rom by Tigrouzen
Download: http://www.multiupload.nl/ZWAPAL7TYB
Put data.img on Osp Folder
System.img and zImage on phone
Dont use other .img files!
Features:
- Chainfire 3D
I will try tomorrow now no time
fire855 said:
Fire Rom for Wave S8500
V1
This Rom is based on the AOKP Rom by Tigrouzen
Download: http://www.multiupload.nl/ZWAPAL7TYB
Put data.img on Osp Folder
System.img and zImage on phone
Dont use other .img files!
Features:
- Chainfire 3D
Click to expand...
Click to collapse
what are the differences between yours and Tigrouzen?
a very good rom. but why my phone keep black after sleep?
is it shut down or can't wake up?
robinchenlin said:
a very good rom. but why my phone keep black after sleep?
is it shut down or can't wake up?
Click to expand...
Click to collapse
I think this is a bug in my rom but there is no update for this rom give because I work at another moment.
More details in the next few days.
I have solved the problem. I install a lock software instead of the system's locker, so it can wake and unlock.
Its sure the problem came maybe from software or library but i dont give a time too look about it
if lock software work then we push it on newer release
Tigrouzen said:
Its sure the problem came maybe from software or library but i dont give a time too look about it
if lock software work then we push it on newer release
Click to expand...
Click to collapse
The problem can also be fixed installing LoadMonitor (https://play.google.com/store/apps/details?id=com.landak.loadmon) and enabling WakeLock from the preferences :good:
I have to ask something.. I've just installed on my Wave the Turko CFW V8, and now i'd like to put this android system on the phone. But when i connect it, PC tells me that i've only 410 Mb of free space. But the Android files are 625 Mb. Then, those are my questions:
1) Turko V8's fota and boot support android system or i've to use this: http://forum.xda-developers.com/showthread.php?t=1901022
2) Before installing Turko V8 i didn't make an Hard Reset.. I've to do that?
3) The Osp folder does not exist on the phone, i've to create it? And expecially, how can i put files there if i haven't sufficient free space?
Thanks in advance for your help!!
Gonnelli1355 said:
I have to ask something.. I've just installed on my Wave the Turko CFW V8, and now i'd like to put this android system on the phone. But when i connect it, PC tells me that i've only 410 Mb of free space. But the Android files are 625 Mb. Then, those are my questions:
1) Turko V8's fota and boot support android system or i've to use this: http://forum.xda-developers.com/showthread.php?t=1901022
2) Before installing Turko V8 i didn't make an Hard Reset.. I've to do that?
3) The Osp folder does not exist on the phone, i've to create it? And expecially, how can i put files there if i haven't sufficient free space?
Thanks in advance for your help!!
Click to expand...
Click to collapse
1.Copy System.img and zimage to phone memory (410mb)
2.TurkoCFW supports latest fota and bootloader no more need to flash again
3.Not needed
4.You can see OSP folder while connecting your phone to PC with USB (Kies Mode)
Thank you very much hero355, i really appreciate your help!!
But i've found 2 bugs (i think) on this android ROM:
1) The system can't see my external SD card.
2) The folder "sdcard" in "/mnt" doesn't work as well. Here, there should be the "common" user's files, like picture, videos and music. But when i try to open it with file manager it says "The SD card is not currently mounted". I can't take picture or open gallery. The system can't see user memory.. How can i solve this problem?
EDIT: No answers?
Dont hit me but i cant get it run.
Flashed the Turko V8 and tried another boot + fota too.
Is there any more Step exept copy zImage, System.img to "phone" and data.img to "OSP". OSP is always called "Folder" but meant
is the "drive" on the "Hero355" Phone? No need to create Folders or rename files?
I just dont get it. I flashed the wave several times and also had the first Froyo-Version (badadriod) on it.
And now this easy stuff just wont work. Freaking out!
Would be very nice someone could help me with it. :good:
te_chnix said:
Dont hit me but i cant get it run.
Flashed the Turko V8 and tried another boot + fota too.
Is there any more Step exept copy zImage, System.img to "phone" and data.img to "OSP". OSP is always called "Folder" but meant
is the "drive" on the "Hero355" Phone? No need to create Folders or rename files?
I just dont get it. I flashed the wave several times and also had the first Froyo-Version (badadriod) on it.
And now this easy stuff just wont work. Freaking out!
Would be very nice someone could help me with it. :good:
Click to expand...
Click to collapse
copy system.img and zimage to Phone memory (390MB like hero355 named )
and Copy data.img to OSP folder
then try to boot
hero355 said:
copy system.img and zimage to Phone memory (390MB like hero355 named )
and Copy data.img to OSP folder
then try to boot
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hero355 said:
copy system.img and zimage to Phone memory (390MB like hero355 named )
and Copy data.img to OSP folder
then try to boot
Click to expand...
Click to collapse
Done that a thausend times...now it finaly works...dont know why. :silly:
Android root
Is this rom already rooted and if not ,how can I root it?
brickkeeper said:
Is this rom already rooted and if not ,how can I root it?
Click to expand...
Click to collapse
use the nand.
all roms are rooted.
GreekBlood said:
use the nand.
all roms are rooted.
Click to expand...
Click to collapse
by the way can we Make Calls, Sms, Record Calls,
Take Pics & Videos also play Pics, video & songs in This ROM??
GreekBlood said:
use the nand.
all roms are rooted.
Click to expand...
Click to collapse
What do you mean with "use the nand"
and some apps dont work and say your phone has to be rooted.(and superuser isnt recorgnising the apps.)
brickkeeper said:
What do you mean with "use the nand"
and some apps dont work and say your phone has to be rooted.(and superuser isnt recorgnising the apps.)
Click to expand...
Click to collapse
nand version is faster.
apps dont work because the phone id is set back to S8500 (wave 1)
and apps doesnt work with that id. (like mc3)
if its again galaxy s1 (I9000) then we can install more apps.
also, overclock doesnt work with the inbuild overclocker, haven't tried yet to use other overclock apps.
Hi all, I have a D101 10.1in phablet that I bricked.
I do have a backup for SP flash Tool but when I try to boot, I get to the splash screen with Decrypt failed, Boot Error!!!
I bricked by using files from another tablet files same model because get error after busy box installation and try a clean installation
I have tried formatting it... and put my old backup just to fix the problem but after the 1 situation get "Decrypt failed, Boot Error!!!"
When I format it. It seems to work because there is nothing at all when I try to boot it.
When I flash the backup I get the splash screen again... (So it's alive... well barely)
here are the details of the phablet:
- MODEL : d101
- MANUFACTURER : alps
- VERSION : 4.2.2 > JELLYBEAN
- PRODUCT NAME : d101
- DISPLAY ID : ALPS.JB3.MP.V1
- BOARD : d101
- MTK PLATFORM : MT6572
- BUILD ID : JDQ39
- BUILD VERSION : vCC01C
- PDA : vCC01C
- UDISK LABEL : vCC01C
- SERIAL NO. : 0123456789ABCDEF
In the Attach Files i give you guys the boot.img lk.bin logo.bin preloader.bin recovery.img secro.bin uboot.img and MT6572_Android_scatter.txt
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
oficial info
pecifications:
General
Operating System - Android 4.2
CPU - MT Cortex A7 Dual-Core
Processor Speed - 1.2GHz
RAM - 1G
Hard Drive Capacity - 8GB
Extended Memory - Support external TF card extend up to 32GB
Gravity Sensor - Yes, 4-dimensional G-sensor
Flash Player - Yes, Support Flash Player 11.0
Click to expand...
Click to collapse
Display
Display Size - 10.1 Inch
Display Technology - Capacitive Touch Screen
Multi-Touch - Yes, 5 points
Display Resolution - 1024 x 600 pixels
Click to expand...
Click to collapse
Camera
Front Camera - 0.3MP
Rear Camera - 2.0MP
Click to expand...
Click to collapse
Connections
Wi-Fi - Yes, Wi-Fi 802.11 b/g/n
3G - Yes, Support external USB 3G modem
GPS - Yes
Bluetooth - Yes, Bluetooth 4.0
Click to expand...
Click to collapse
Telephone - Yes,
2G:GSM850/900/1800/1900MHz
3G:WCDMA850/2100MHz
Click to expand...
Click to collapse
Input/Output Connectors
Ports
1 x Micro USB Interface
1 x Earphone Jack
1 x TF Card Slot
2 x SIM Card Slot
Audio/Video - 3.5mm headphone jack
Built-in stereo loud speaker
Built-in microphone
Battery
Battery Capacity - 4200mAh
Power Adapter
Input 100-240V~50/60HZ / Output 5V 2A
Color - White
Dimensions(L x W x H) - 243 x 165.8 x 10mm
Net Weight - 513g
Accessories
1 x Power Adapter, 1 x OTG Cable
Click to expand...
Click to collapse
You solved this problem? I have the same
Sadly no fix yet
Rebelation said:
Sadly no fix yet
Click to expand...
Click to collapse
I stubbornly looking for a solution to this problem
same problem here
i face the same problem in my XTOUCH PF81 tablet .
lets check some conditions :
what the type of flashing tool you used ?
is the boot file used extension .mpn or .img ??
did you used the correct project number ? (incase of wiselink tool)
1. SP_Flash_Tool_v3.1344.0.212 or SP_Flash_Tool_v3.1316.0.150
2. img
3 How to understand the project number?
Try the wiselink flash tool 4.1 , i think your tablet project number is td710
Where we can Check that project number
check this
Rebelation said:
Where we can Check that project number
Click to expand...
Click to collapse
https://docs.google.com/document/d/1XEl6O7RNls4TzVYieq0ut6IbP19BTEHewvMGaFofw8U/edit?usp=sharing
at the opening of writes (incorrect scatter file format)
Probably need another scatter
muhammad sadiq said:
https://docs.google.com/document/d/1XEl6O7RNls4TzVYieq0ut6IbP19BTEHewvMGaFofw8U/edit?usp=sharing
Click to expand...
Click to collapse
neoxlam said:
at the opening of writes (incorrect scatter file format)
Probably need another scatter
Click to expand...
Click to collapse
just change it from scatter.txt to scatter.sca , and remeber to remove the tick from force high speed , duel core need the full speed option .
wiselink update necessary?
neoxlam said:
wiselink update necessary?
Click to expand...
Click to collapse
no , for me the new version not work , i used 4.1 and didnt accept update , after install its will ask to install drivers update , i think you are already have the preloader drivers so disregard it .
Well that make flash but still the problem did you fix your tab with that flash tool?
Tried in different ways, the error persists
is a great tool but is just to flash nothing more
dont fix the Decrypt failed, Boot Error!!!
I suggested that the need to find a test point on the board. With its aid, you can unlock preloader, but I do not know how to find a test point
Rebelation said:
is a great tool but is just to flash nothing more
dont fix the Decrypt failed, Boot Error!!!
Click to expand...
Click to collapse
im try to flash the boot.img by fastboot command , and its flashed , but when im try the : fastboot erase userdata , its fail due to security reason , i do think this is our problem , system need to be wiped to get boot !!!
muhammad sadiq said:
im try to flash the boot.img by fastboot command , and its flashed , but when im try the : fastboot erase userdata , its fail due to security reason , i do think this is our problem , system need to be wiped to get boot !!!
Click to expand...
Click to collapse
the problem of wipe or not comes when the system start and this is not the problem of "Decrypt failed, Boot Error!!!"
when you have that problem of wipe you get stuck on logo loop and this is not the problem
this is before system starts because he don't recognize charging nothing because dont recognize the nothing
this problem is about decryption system tree is like lost key to decrypt the files and participation´s
imagine like Linux if you encrypt the files of the system with key and if your system loses that key don't recognize so the system you need put key again or format and install again new fresh
all d101 tablets are the same no mather what seller or logo comes on the tab all are the sam matherboard all are fake mtk6582 some come with android 4.4 but also a fake is just clone rom of 4.2 this tablet are great tablets for normal users for us we like root and install all **** and make or own system this tab is s **** because the system comes encrypet when we try do something broken the encrypt system
we have just 4 options
1 Find the point of the encryption point on the bootloaders and make skip that verification
2 find away to get the encryption key and place it again
3 make a new and fresh undecrypt android system installation
4 put this tablet on the trash and buy new one
i agree with the last option
4 put this tablet on the trash and buy new one
hahahahaha:good:
After launch Remix OS for PC, People install Remix OS on PC and complaint, My Partition Size is 16 GB or 20 GB but In Remix OS show Internal Storage only 3.99 GB ?
So My Friends don't worry, today i'll show you in this video how to increased internal storage equal to its partition storage in Remix OS for PC.
So my friends watch Full Video Tutorial : https://www.youtube.com/watch?v=NlQ1OeKthrI
Download Material Here :-
Minitool Partition Wizard : http://goo.gl/mvJXjT
EasyBCD : https://neosmart.net/EasyBCD/
EXT2FSD : http://bit.ly/23gIubo
BOOTICE : http://bit.ly/1T8aXfb
And Main Code : http://bit.ly/1OIfNuj
If you Like my Video Plz Subscribe Me for More Video
you should mention this tutorial is for when you have a Windows computer and want to dualboot with remixOS
I have some older computers here where I want to install remixOS on, with the complete HD available to the OS.
kabeerkhan2016 said:
After launch Remix OS for PC, People install Remix OS on PC and complaint, My Partition Size is 16 GB or 20 GB but In Remix OS show Internal Storage only 3.99 GB ?
So My Friends don't worry, today i'll show you in this video how to increased internal storage equal to its partition storage in Remix OS for PC.
So my friends watch Full Video Tutorial : https://www.youtube.com/watch?v=NlQ1OeKthrI
Download Material Here :-
Minitool Partition Wizard : http://goo.gl/mvJXjT
EasyBCD : https://neosmart.net/EasyBCD/
EXT2FSD : http://bit.ly/23gIubo
BOOTICE : http://bit.ly/1T8aXfb
And Main Code : http://bit.ly/1OIfNuj
If you Like my Video Plz Subscribe Me for More Video
Click to expand...
Click to collapse
ok here is my problem so far,
everything is gray out when i go to ADD NEW ENTRY when using the latest EasyBCD 2.3, any advice?
other than that Tutorial looks neat and clean,
DrakenFX said:
ok here is my problem so far,
everything is gray out when i go to ADD NEW ENTRY when using the latest EasyBCD 2.3, any advice?
other than that Tutorial looks neat and clean,
Click to expand...
Click to collapse
Pretty sure that if it is grayed out it means your computer is UEFI based, which means you would need to reinstall windows in the legacy mode of your PC to use this method.
VeryCrushed said:
Pretty sure that if it is grayed out it means your computer is UEFI based, which means you would need to reinstall windows in the legacy mode of your PC to use this method.
Click to expand...
Click to collapse
@kabeerkhan2016,
I figure, this or any other methods @kabeerkhan2016 mention only works for Legacy Bios and NOT for UEFI/EFI,
Which another whole process if you want dual boot with Remix or any other 3er. Party OS
Bravo. Worked for me!
Please add some procedures in text to the thread.. It'll be helpful.
DrakenFX said:
@kabeerkhan2016,
I figure, this or any other methods @kabeerkhan2016 mention only works for Legacy Bios and NOT for UEFI/EFI,
Which another whole process if you want dual boot with Remix or any other 3er. Party OS
Click to expand...
Click to collapse
Dudes, I could not find in my Bios the option to choose legacy mode. Anyone can help me?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
persiomenezes said:
Dudes, I could not find in my Bios the option to choose legacy mode. Anyone can help me?
Click to expand...
Click to collapse
your BIOS looks different then mine but i guess the option you are looking is under SECURITY or ADVANCE
DrakenFX said:
your BIOS looks different then mine but i guess the option you are looking is under SECURITY or ADVANCE
Click to expand...
Click to collapse
I have postes prints in these links. Could you help me? http://imgur.com/jzHgy3o and http://imgur.com/z7ToNkY
persiomenezes said:
I have postes prints in these links. Could you help me? http://imgur.com/jzHgy3o and http://imgur.com/z7ToNkY
Click to expand...
Click to collapse
you are running your laptop in IDE which mean you shouldn't have a problem at all,
by the way the REMIX OS you need is Remix OS for PC Package (Legacy) not the EFI and you'll be good to go
Increasing the space on the Flash disk instead of HDD
Dear Kabeer Khan,
I would like to increase the space on the flash disk not HDD. I have 32 GB Falsh and RemisOS is already installed on it.
Is there a way?
Thanks in advance.
VeryCrushed said:
Pretty sure that if it is grayed out it means your computer is UEFI based, which means you would need to reinstall windows in the legacy mode of your PC to use this method.
Click to expand...
Click to collapse
my pc is uefi based how to reinstall it in the legacy mode
raouf robi said:
my pc is uefi based how to reinstall it in the legacy mode
Click to expand...
Click to collapse
your hard disk mbr or gpt ?
kabeerkhan2016 said:
your hard disk mbr or gpt ?
Click to expand...
Click to collapse
i dont know
raouf robi said:
i dont know
Click to expand...
Click to collapse
Right Click on This PC/My Computer and click on Manage > Click on Disk Management > Right click on Disk 0, then if you see convert to mbr (it's mean your hard drive is gpt) or if you see convert to gpt (it's mean your hard drive is mbr) Okay.
If your hard drive is Gpt so first convert into MBR (Search on Google Play "How to convert gpt to mbr or mbr to gpt, many tutorials available)
Make Boot Windows in PD / DVD (use rufus and choose option for mbr partition)
Turn off Uefi/Efi option in Bios
Format Again PC/Laptop.
cant install any thing no enough space
dear all
please after getting full hard storage "50 GB" i faced new problem which is i can't install any .apk because of no enough space and i have around "20 GB" as free space
and the default language is china how to make it english
thank you all
iRajab said:
dear all
please after getting full hard storage "50 GB" i faced new problem which is i can't install any .apk because of no enough space and i have around "20 GB" as free space
and the default language is china how to make it english
thank you all
Click to expand...
Click to collapse
try this install terminal emulator and write commands
1-su
2-pm set-install-location 2
or
pm set-install-location 0
or
pm set-install-location 1
see what's working for you
I hope this help
kabeerkhan2016 said:
Right Click on This PC/My Computer and click on Manage > Click on Disk Management > Right click on Disk 0, then if you see convert to mbr (it's mean your hard drive is gpt) or if you see convert to gpt (it's mean your hard drive is mbr) Okay.
If your hard drive is Gpt so first convert into MBR (Search on Google Play "How to convert gpt to mbr or mbr to gpt, many tutorials available)
Make Boot Windows in PD / DVD (use rufus and choose option for mbr partition)
Turn off Uefi/Efi option in Bios
Format Again PC/Laptop.
Click to expand...
Click to collapse
Do you mean we need to re-install windows to MBR format ? To make dual boot alive ?
I have same problem, my windows is boot via UEFI, so it can't boot from another OS
Here's my problem when run easyBCD
goes as far as remix text
Hello.
I followed the instructions and all seems to work but my computer boots, gets past Android logo, up comes REMIX text and then it just stays there with a small cursor flashing. I waited an hour but it goes no further. I am trying to bot 32 bit version and it works on same computer but from USB stick. Hoe long should it normally take from hard disk? From USB it took 10 mins.
Thanks
smart_thingup said:
Do you mean we need to re-install windows to MBR format ? To make dual boot alive ?
I have same problem, my windows is boot via UEFI, so it can't boot from another OS
Here's my problem when run easyBCD
Click to expand...
Click to collapse
maybe easybcd only support for mbr/legacy bios mode [emoji4]