I have the x920, rooted , added autocwm recovery,
Found rom on needrom, download on SD
Reboot in recovery
Clean data/fasctory reset
Clean cache partition
Clean dalvik
Install zip
Opening but it stops and says aborted !
What am i doing wrong ?
arletroost said:
I have the x920, rooted , added autocwm recovery,
Found rom on needrom, download on SD
Reboot in recovery
Clean data/fasctory reset
Clean cache partition
Clean dalvik
Install zip
Opening but it stops and says aborted !
What am i doing wrong ?
Click to expand...
Click to collapse
How fix my driver problem
My phone reset in logo, charge normal
SPFT no auto flashing
Charge mode:
SCI General U2S(AT) (COM:30)
SCI Vendor U2S(DIAG) (COM:36)
Vol+ and plug USB
SCI USB2Serial (COM:50)
This is good driver ?
Please frieng how fix error
Related
Hi,
I wanted to flash a new rom (Pure AOKP v2.0 Spike 6)
Had ICS Litening rom before.
I copied the zip file on my external SD
made wipe data/factory reset
wipe chace
and wipe dalvik
then installed from zip file.
But when rebooting the S2 freezes on the first bootscreen with the yellow triangle. I forgot to turn on debugging mode bevore wiping. Is that the prob?
What can I do now? Tryed also another rom (http://forum.xda-developers.com/show....php?t=1460702)
Installation successfull but always freeze after reboot.
Default procedure if you can't get past a bootloop/etc. - flash a stock ROM and try again. Additionally, check the links in my signature.
screamworks
edit: msg deleted.. wrong thread
T4mpon said:
Hi,
I wanted to flash a new rom (Pure AOKP v2.0 Spike 6)
Had ICS Litening rom before.
I copied the zip file on my external SD
made wipe data/factory reset
wipe chace
and wipe dalvik
then installed from zip file.
But when rebooting the S2 freezes on the first bootscreen with the yellow triangle. I forgot to turn on debugging mode bevore wiping. Is that the prob?
What can I do now? Tryed also another rom (http://forum.xda-developers.com/show....php?t=1460702)
Installation successfull but always freeze after reboot.
Click to expand...
Click to collapse
Try using a ROM Nuke script before flashing the custom ROM mate. :good:
Hello,
I updated my CM 10 to CM 11 and forget to flash the new Gapps for CM 11.
Now my phone everytime say's: "Einrichtungsassistent" wurde beendet.
thats german for Setup wizard was closed
I tried to install the new Gapps -> the same error.
After that i tried to flash the ROM again and install the right gapps -> the same error.
After that i tried to wipe cache, wipe dalvik cache and install gapps, wipe cache, wipe dalvik cache -> the same error.
What can i do?
I don't want to wipe everything on my phone.
mfg
wassilij
same issue here. i can confirm that factory reset/wipe does not help
I also have the same issue, i managed to access all applications and desktop by adding "Apps/Startprogram" as a shortcut in at my lockscreen. However when pressing homebutton i still have the issue where Setup Wizard crashes.
Rawa said:
I also have the same issue, i managed to access all applications and desktop by adding "Apps/Startprogram" as a shortcut in at my lockscreen. However when pressing homebutton i still have the issue where Setup Wizard crashes.
Click to expand...
Click to collapse
Same issue with new nightly 09.
It is not possible to change laucnher away from setup wizard until it is completed it seems.
---------- Post added at 11:34 PM ---------- Previous post was at 10:37 PM ----------
Managed to solve it!
First off make sure you have the newest version of ClockworkMod Recovery (6.0.4.4) :
The problem for me was using the wrong gapps i believe! It was ROM Manager who provided me with a bad version. I manually downloaded Gapps 4.4.0:
http://wiki.cyanogenmod.org/w/Gapps
There are also versions of 4.4.1 that should work aswell, I hav'nt tried though:
http://forum.xda-developers.com/showthread.php?t=2012857
Then i simply restarted my phone entering recovery mode (volume up, power, home) and reseted all phone data, reset dalvik etc. Then i first installed gapps from sdcard and then nightly from sdcard.
For those facing Setup Wizard has Stopped FC
I was facing this problem for a long time today. My device is a Galaxy Fit and I was playing with the latest cm11 kitkat update. However it does not work without a complete data wipe and after the data wipe and flashing the latest nightly it gave me the Setup Wizard Stopped FC.
All I did was -
1) Go to recovery mode
2) wipe data/factory reset (this option wipes data , cache and sd-ext)[using CWM 6.0.4.6]{use the Recovery version that allows you to install Kitkat if you faced this problem while flashing cm11 kitkat}
3)wipe cache
4) wipe system {from the mount unmount menu option}
5) wipe dalvik cache {from the advanced menu option}
6) flash the proper gapps file from the sd card
7) flash the proper rom from the sd card
[here I wanted to make sure if everything was working again so i rebooted and well the Setup Wizard DID NOT pop up]
8) rebooted into recovery and flashed the CWM 6.0.2.7 [which you will probably need for Mounts2Sd to work]
This is my first post ever.. Hope I helped. Ty:fingers-crossed:
I just wiped /system and it got fixed
himan20 said:
For those facing Setup Wizard has Stopped FC
I was facing this problem for a long time today. My device is a Galaxy Fit and I was playing with the latest cm11 kitkat update. However it does not work without a complete data wipe and after the data wipe and flashing the latest nightly it gave me the Setup Wizard Stopped FC.
All I did was -
1) Go to recovery mode
2) wipe data/factory reset (this option wipes data , cache and sd-ext)[using CWM 6.0.4.6]{use the Recovery version that allows you to install Kitkat if you faced this problem while flashing cm11 kitkat}
3)wipe cache
4) wipe system {from the mount unmount menu option}
5) wipe dalvik cache {from the advanced menu option}
6) flash the proper gapps file from the sd card
7) flash the proper rom from the sd card
[here I wanted to make sure if everything was working again so i rebooted and well the Setup Wizard DID NOT pop up]
8) rebooted into recovery and flashed the CWM 6.0.2.7 [which you will probably need for Mounts2Sd to work]
This is my first post ever.. Hope I helped. Ty:fingers-crossed:
Click to expand...
Click to collapse
Thank you so much. It worked on my gt-s5570 running CM11
Just installed Resurrection Remix v5 kitkat 4.2.2
Awesome....Really Stable..
But when 8 reboot the phone..
It got struck at the screen where GTI9100 GALAXY S2 is written.
I can reboot to recovery but my Android is not booting...
I also tried cm10.2 kitkat but same issue
Need help....Really need kitkat
rahulbrand said:
Just installed Resurrection Remix v5 kitkat 4.2.2
Awesome....Really Stable..
But when 8 reboot the phone..
It got struck at the screen where GTI9100 GALAXY S2 is written.
I can reboot to recovery but my Android is not booting...
I also tried cm10.2 kitkat but same issue
Need help....Really need kitkat
Click to expand...
Click to collapse
In some rare occasions my phone also gets stuck at the booting logo, but holding power down and restart the phone solves my problem.
Did you preform a clean install?
Christiaan91 said:
In some rare occasions my phone also gets stuck at the booting logo, but holding power down and restart the phone solves my problem.
Did you preform a clean install?
Click to expand...
Click to collapse
yes I cleaned using philz kernel then flashed kitkat compatible kernal and installed..
When I stuck at logo what should I do..???
Is it a bug??
rahulbrand said:
yes I cleaned using philz kernel then flashed kitkat compatible kernal and installed..
When I stuck at logo what should I do..???
Is it a bug??
Click to expand...
Click to collapse
Can you give us a step by step program of what you're doing when install a new rom?
Christiaan91 said:
Can you give us a step by step program of what you're doing when install a new rom?
Click to expand...
Click to collapse
Selected clean to install a new rom
wiped dalvik cache
Flahed kitkat compatible recovery
Installed rom
installed gaaps
rahulbrand said:
Selected clean to install a new rom
wiped dalvik cache
Flahed kitkat compatible recovery
Installed rom
installed gaaps
Click to expand...
Click to collapse
And what does the op say?
"1.- Wipe data / factory reset (mandatory if you coming from STOCK OR 4.2.X version or another ROM)
2.- Install the Main ROM
3- install gapps
4.- When you're back on recovery go to Advanced
5.- Wipe Dalvik Cache
6.- Fix Permissions
7.- Wipe Cache Partition
8.- Reboot"
In stead of step 1 i would suggest:
Mounting /system, /data and /cache
Format /system, /data and /cache
Then proceed with step 2 etc...
Everything will be lost so make a back-up with titanium backup. (don't back-up/restore system apps)
Clean Install
rahulbrand said:
yes I cleaned using philz kernel then flashed kitkat compatible kernal and installed..
When I stuck at logo what should I do..???
Is it a bug??
Click to expand...
Click to collapse
rahulbrand said:
Selected clean to install a new rom
wiped dalvik cache
Flahed kitkat compatible recovery
Installed rom
installed gaaps
Click to expand...
Click to collapse
okay.what you do is not enough . and as you mentioned , you need to reboot recovery(under advanced ) after you flash the compatible recovery .
I recommend ..
1) flash compatible recovery ( http://forum.xda-developers.com/showthread.php?t=2546597 ) and reboot recovery
2)wipe data
3)wipe cache
4)wipe dalvik cache(in advanced )
5)go to mounts and storage and format system , data , cache
6) flash the rom and compatible gapps and leave the rom after flashing for like 10 minutes ( leave it in the recovery , untouched )
7) after you are back , reboot system and let the rom boot up .
8) after it boots up and you set it up ( like setting time , date , account ) leave the rom untouched again .. say for an overnight so that it gets the time to settle .. the next day .. start customizing and installing apps like you did .
P.S. : I would recommend not to flash a custom kernel as of yet as kernels are in beta stages as of now
All the best !
flasherruts said:
okay.what you do is not enough . and as you mentioned , you need to reboot recovery(under advanced ) after you flash the compatible recovery .
I recommend ..
1) flash compatible recovery ( http://forum.xda-developers.com/showthread.php?t=2546597 ) and reboot recovery
2)wipe data
3)wipe cache
4)wipe dalvik cache(in advanced )
5)go to mounts and storage and format system , data , cache
6) flash the rom and compatible gapps and leave the rom after flashing for like 10 minutes ( leave it in the recovery , untouched )
7) after you are back , reboot system and let the rom boot up .
8) after it boots up and you set it up ( like setting time , date , account ) leave the rom untouched again .. say for an overnight so that it gets the time to settle .. the next day .. start customizing and installing apps like you did .
P.S. : I would recommend not to flash a custom kernel as of yet as kernels are in beta stages as of now
All the best !
Click to expand...
Click to collapse
Worked Fine...Thanks..
HI
i dont know is this the right place to post , hope someone can help me
I tried to install [ROM] [LB/UB] [4.4.2] [UPDATE :- 22.05.2014] Rooted,Deodexed,Zipaligned Stock 0.230 to Xperia z1.
i downloaded Rom ,SuperSU Fix ,Stripped Kernel and I tried to install the rom but got error (something like error 7)
i had installed CM Mod 11 and CWM-Based Recovery 6.0.4.8 but http://forum.xda-developers.com/xperia-z/development/rom-rooted-deodexed-zipaligned-stock-0-t2759467 recommended CWM-Based Recovery 6.0.4.6 so i downloaded it .
so i Wipe Data Factory Reset ,Wipe Cache / Dalvik Cache ,Format System / Data / Cache first like the guide says ,it was not possible to install rom so i I thought that problem is CWM-Based Recovery 6.0.4.8 and installed 6.0.4.6 and made restart for phone and now phone wont start , red light is plinking when i hold power button , i tried power button and volume buttons and it wont start , i think problem is that i formated System / Data / Cache , is it possible to recover System / Data / Cache or install them some how ?
pls help
SilksEST said:
HI
i dont know is this the right place to post , hope someone can help me
I tried to install [ROM] [LB/UB] [4.4.2] [UPDATE :- 22.05.2014] Rooted,Deodexed,Zipaligned Stock 0.230 to Xperia z1.
i downloaded Rom ,SuperSU Fix ,Stripped Kernel and I tried to install the rom but got error (something like error 7)
i had installed CM Mod 11 and CWM-Based Recovery 6.0.4.8 but http://forum.xda-developers.com/xperia-z/development/rom-rooted-deodexed-zipaligned-stock-0-t2759467 recommended CWM-Based Recovery 6.0.4.6 so i downloaded it .
so i Wipe Data Factory Reset ,Wipe Cache / Dalvik Cache ,Format System / Data / Cache first like the guide says ,it was not possible to install rom so i I thought that problem is CWM-Based Recovery 6.0.4.8 and installed 6.0.4.6 and made restart for phone and now phone wont start , red light is plinking when i hold power button , i tried power button and volume buttons and it wont start , i think problem is that i formated System / Data / Cache , is it possible to recover System / Data / Cache or install them some how ?
pls help
Click to expand...
Click to collapse
Yes, the problem was definitely formatting system. Never recommended unless you know the rom works and / or you have a known working nandroid backup. Typically Status 7 errors are from the zip checking your build.prop to see if you're installing it on the right device. If you wiped the system, then there is no build.prop to check = issues. You can try and remove the asserts in the updater-script or just flash back to stock and redo it.
http://forum.xda-developers.com/showthread.php?t=2522762
http://xperiafirmware.com/8-firmware/42-sony-xperia-z1-c6903
thanx i got phone working , my hart stoped for a second before THANK YOU
Hello all SGS User !
Here a small guide for u
If you boot after installing rom and you stuck at Samsung Galaxy Star GT-S528X ?
Well i has that problem when installing some rom.
And i know how to fix it !
Here it goes !
MAKE SURE YOUR ROM IS NOT DELETED
1.Go to recovery mode (Volume Up+Home+Power)
2.Factory Reset, format cache, and dalvik
3.Install the ROM again
4.If you got a message like this Fix root (blablabla) choose yes and you must be can boot normally
5.If not, try again
6.If NOT AGAIN do this
7.Go to download mode
8.Flash stock firmware
9.You can boot normally now
Thats it, maybe it will help you
A Little Message :
"Read carefully the procedure of installing rom and take a backup first"
Click to expand...
Click to collapse