hi guys i'm on monxdefied rom but got som strang problem:
randon got bootloop when i reboot or when i shoutdown the start.
the only solution is goin in recovery wipe cache and dalwik the the z reboot normaly.
the starnge is that this problem is randome sometime bootloop somtime not
the second is related to the cp12 cover that i use if the phone is in charge with cable or only by the cp12 if i try to shotdown the phone don'tgo off but restart
any other have this problem
ty for help
luca73n said:
hi guys i'm on monxdefied rom but got som strang problem:
randon got bootloop when i reboot or when i shoutdown the start.
the only solution is goin in recovery wipe cache and dalwik the the z reboot normaly.
the starnge is that this problem is randome sometime bootloop somtime not
the second is related to the cp12 cover that i use if the phone is in charge with cable or only by the cp12 if i try to shotdown the phone don'tgo off but restart
any other have this problem
ty for help
Click to expand...
Click to collapse
Don't know about the first issue
About the second, my c6802 will reboot if it is plugged into the pc if I power it off, cant remember if it does the same on the wall charger though
good to know that it's not a problem.
ok, after some test the bootloop proble is related to the cp12 cover. with the cover the phone remain in bootloop without it start normaly.
so from now poweroff and boot out of the cp12.
it's a starnge thing that this happen, but i can live with this bug :fingers-crossed:
luca73n said:
hi guys i'm on monxdefied rom but got som strang problem:
randon got bootloop when i reboot or when i shoutdown the start.
the only solution is goin in recovery wipe cache and dalwik the the z reboot normaly.
the starnge is that this problem is randome sometime bootloop somtime not
the second is related to the cp12 cover that i use if the phone is in charge with cable or only by the cp12 if i try to shotdown the phone don'tgo off but restart
any other have this problem
ty for help
Click to expand...
Click to collapse
If you actually meant infinite boot splash animation, and you are using Xposed + GravityBox, then you are having the same problem as I have.
I have found a workaround: make sure the GravityBox module is the last one activated in Xposed Framework. That means after you have installed any other module, disable GravityBox module, reboot, enable it again. Then there will be no random infinite boot.
Related
My phone was running at about 60% battery last night, and working fine. It was in my pocket and it vibrated. I was unable to turn it on or reboot it, even after removing the battery. I tried using the battery from my wife's S2 but still no luck. I tried connecting the power supply but it still wouldn't boot so I left it charging overnight.
This morning it alternately flashed a fully green battery and a fully black battery. If I press and hold the power button it starts the boot process - I get past the Samsung splash screen and see the first "Resurrection Remix" splash screen, but then it reverts to displaying the green battery.
Any ideas for how I can revive the phone??
itm said:
My phone was running at about 60% battery last night, and working fine. It was in my pocket and it vibrated. I was unable to turn it on or reboot it, even after removing the battery. I tried using the battery from my wife's S2 but still no luck. I tried connecting the power supply but it still wouldn't boot so I left it charging overnight.
This morning it alternately flashed a fully green battery and a fully black battery. If I press and hold the power button it starts the boot process - I get past the Samsung splash screen and see the first "Resurrection Remix" splash screen, but then it reverts to displaying the green battery.
Any ideas for how I can revive the phone??
Click to expand...
Click to collapse
Ok We cant say its bricked!! Because its booting up but not coming to homescreen rite? Are u able to get into recovery or download mode?? If ur able o then wipe the data cache and dalvik cache, reinstall the ROM again.. If Recovery doesnt shw up.. Then Use ODIN to flash original fw!! Even if u still couldn get it.. Order a USB JIG from Ebay and try getting into DOWNLOAD MODE!! Even after this its still working means ITS BRICKED !!
Start download mode and the flash a new stock firmware . And your phone isnt bricked .!
This is why I always make a backup.
If you can get into download mode you can fix it, if you can't it's a service centre job. Pretty simple really.
Try cleaning charging port..
Sent from my GT-I9100 using XDA
Uh oh...I managed to get into Recovery mode, did a factory reset and kicked off a re-install of the Resurrection Remix ROM from the external SD and it's hung at 50% (for 10 mins now) - at the "Extracting /system..." stage. I daren't interrupt it.
Any ideas???
Yes stop messing
1: If you dint have to save anything, wipe better to full wipe
Flash a stock Rom using Odin, than start again with custom roms.
OR
2: download your custom Rom again and flash, might be corrupt download.
atifsh said:
Yes stop messing
1: If you dint have to save anything, wipe better to full wipe
Flash a stock Rom using Odin, than start again with custom roms.
OR
2: download your custom Rom again and flash, might be corrupt download.
Click to expand...
Click to collapse
So it's OK to interrupt this ROM flash, even though it's stuck at 50%? Should I just hold the power button or remove the battery??
pull the battery
But I say flash stock Rom first, lengthy procedure I know, but safer
OK I decided to reflash RR 2.3, which had been running fine for a couple of weeks previously. Immediately after flashing (which worked OK) the boot process wouldn't complete - it got as far as the RR splash screen then died (screen blank, and needed a long press on the power button to restart).
This happened several times. Eventually I removed and replaced the battery and it finally booted.
Does this sound like a hardware problem? I've noticed that the phone often runs quite warm, but I don't know if that's normal.
You have to flash stock rom, only way to know if there is something wrong with your phone, run it for couple days.
Now to the heat issue, it is due to
1: modem
2: kernel
3: both
Help Needed guys ! I have (I9100XWLSK_I9100ODDLSA_INU) flashed on my s2 and is rooted (temp recovery + push SuperSu method).
From the past few days there had been severe battery drain and root issues, also the phone used to freeze every now and then. So i un-rooted and rooted it by the same method mentioned earlier.
Today my phone froze again so i restarted it and after the restart the phone got stuck on the Samsung logo(device info) it stayed there for a while hence i removed the battery and booted it up, now it got stuck at the Samsung boot animation( a loop) so i waited for a while and it continued to be in a loop. I again removed the battery and tried booting my phone, that's when the phone stopped responding. (no recovery, no download, no battery symbol on device when i put it for charge but the phone heats) i tired booting with a different battery but no luck! What might have gone wrong ? How can i fix it ?
That sound kinda dead.
Does it heat up near the camera?
Sent from the little guy
akshaykaranjkar said:
Help Needed guys ! I have (I9100XWLSK_I9100ODDLSA_INU) flashed on my s2 and is rooted (temp recovery + push SuperSu method).
From the past few days there had been severe battery drain and root issues, also the phone used to freeze every now and then. So i un-rooted and rooted it by the same method mentioned earlier.
Today my phone froze again so i restarted it and after the restart the phone got stuck on the Samsung logo(device info) it stayed there for a while hence i removed the battery and booted it up, now it got stuck at the Samsung boot animation( a loop) so i waited for a while and it continued to be in a loop. I again removed the battery and tried booting my phone, that's when the phone stopped responding. (no recovery, no download, no battery symbol on device when i put it for charge but the phone heats) i tired booting with a different battery but no luck! What might have gone wrong ? How can i fix it ?
Click to expand...
Click to collapse
I think you need a mobo replacement.Sorry.Or you can try a JIG first.
gastonw said:
That sound kinda dead.
Does it heat up near the camera?
Sent from the little guy
Click to expand...
Click to collapse
Yes! it heats near the camera.
GamingDj said:
I think you need a mobo replacement.Sorry.Or you can try a JIG first.
Click to expand...
Click to collapse
Ohh ! Will give it try, Hope it works.
The phone told me there was a new update I started to install it, got to reboot and now is just on the elephone logo which comes every 20 sec and goes again. I cannot turn the phone off or do anything with it. Any help please
For me just shut down the phone and then reiniciat the phone ....work for me....
Enviado do meu thor através de Tapatalk
same problem here.. wtf nice update elephone, we cant be the only ones right?
now stuck on logo, restarting every 3 seconds with 100% battery...i m not even sure it will work again if battery is drained out
i can do nothing, no trys to get in factory mode or shut the phone down worked..
stuck on elephone log after upgrade
My elephone P9000 is now cycling the elephone logo every 8 seconds or so after the latest audio upgrade... It will not switch off or do anything else. Did you solve the problem. Or anyone else help. Can you share with me? Thank you.
same problem here.. wtf nice update elephone, we cant be the only ones right?
now stuck on logo, restarting every 3 seconds with 100% battery...i m not even sure it will work again if battery is drained out
i can do nothing, no trys to get in factory mode or shut the phone down worked..
Click to expand...
Click to collapse
so my battery was fully empty now.. i even pressed the power button 100 times after the battery was empty, to make sure all current is out of the phone.
plugged in charger... after 10 seconds phone start itself (after viewing the picture of empty battery) and elephone logo shows short and then back to showing picture of empty batterie cycle. After some minutes, and battery is loaded a little bit, elephone logo cycles again.
So rest in piece my p9000, i can nothing, i cant do anything from my pc because its only starting for like 5 seconds, i cant shut it down because of that and i cant get in factory mode
i am so pissed right now
just wanted to install the new update, everything worked fine like all the times before that and now my phone is ready for the trashcan.
Is there any way to reset the software without getting in factory mode?
Reset from sp flash tools?
Pro4TLZZ said:
Reset from sp flash tools?
Click to expand...
Click to collapse
the phone turns on and off in a cycle of 5 seconds, so that wont work
and i cant stop that cycle.
even if battery is 0% (i even press power button many times so really its drained out). If i recharge it, the cycle starts again without me doing anything. The Power button is not broken or something. it all began after i started new ota update and the phone rebooted like "mkitty" has the same problem it seems
Same for me, I have no idea how to restart my phone. And i dont want to loose all data I have on it.
have you tried to hold the volume up and power at the same time during the restart process to try and force recovery?
xvicedice said:
have you tried to hold the volume up and power at the same time during the restart process to try and force recovery?
Click to expand...
Click to collapse
Hello,
Yes . I have tried that.
I have a list of options that come up on the screen.
I have tried them apart from the wipe data/factory reset.
But it is still the same result.
Thank you for help.
Any more ideas?
what OTA update version did you update?
Simplytouched said:
what OTA update version did you update?
Click to expand...
Click to collapse
It said something about wifi and audio update. I followed the instructions as per a previous update (which worked OK). I never took notice of any version numbers etc.
I have all I need to flash a new rom to the bricked phone but when I connect the off phone to my pc the usb not recognised comes up and I cannot flash the rom to the phone. and yes I have the mediatek vcom drivres install. Why did I buy a Chinese phone elephone p9000 please stay well away from it. on paper is a great phone but in reality does not perform in any sense, battery only lasts 7 hours if I was lucky camera crap, gps works most of the time all that ram and power and t struggles with some videos o dear god. never again. now I cannot even read what I have on the sd cos is formatted for the phone.
juka1 said:
I have all I need to flash a new rom to the bricked phone but when I connect the off phone to my pc the usb not recognised comes up and I cannot flash the rom to the phone. and yes I have the mediatek vcom drivres install. Why did I buy a Chinese phone elephone p9000 please stay well away from it. on paper is a great phone but in reality does not perform in any sense, battery only lasts 7 hours if I was lucky camera crap, gps works most of the time all that ram and power and t struggles with some videos o dear god. never again. now I cannot even read what I have on the sd cos is formatted for the phone.
Click to expand...
Click to collapse
Its actually a great phone. Do you have twrp installed and can you get access to it? You could always boot into twrp transfer over the ROM and install it from there. If you have installed the vcom drivers then when the USB not recognized alert pops up. Go to settings and device manager. Right click the unknown device and click let me pick driver. You should be able to install it from there
The only thing I can suggest is to take the back panel of and unplug the battery. There videos on how to do this if you search YouTube or the forum. Effectively you perform a hard reset of the phone.
If and when you do get it working just twrp installed and do a backup of the whole phone working before performing any future upgrades or Rom changes. Its just better safe then sorry.
thenk you very much for that
The problem is that when I connect the phone on the off to the pc starts again the cycling through the elephone logo so the pc sees the phone for a few seconds in which does not recognises it and then is like the phone goes off until the next cycle so no time to go to device manager and install manually. but thank you for the comment.
removing the battery will void the warranty. I had the phone only since may.
It's unlikely it really matters. Your phone seller not going to take it back or fix it for free just because it's bootlopping. Well they may so just ask them. If you can't get it into recovery then a battery disconnect or contact your seller are your options
thank you
Android-UK said:
It's unlikely it really matters. Your phone seller not going to take it back or fix it for free just because it's bootlopping. Well they may so just ask them. If you can't get it into recovery then a battery disconnect or contact your seller are your options
Click to expand...
Click to collapse
I can get it into recovery mode but I haven't got any software install in the sd card to do a recovery that is why I thought my only option was the sp flashing tool and the room which I have
juka1 said:
I can get it into recovery mode but I haven't got any software install in the sd card to do a recovery that is why I thought my only option was the sp flashing tool and the room which I have
Click to expand...
Click to collapse
Well in that case all you need is a stock rom and yes just flash them with sp tools and it should start booting again. The fact you can get to recovery is a good sign.
Android-UK said:
Well in that case all you need is a stock rom and yes just flash them with sp tools and it should start booting again. The fact you can get to recovery is a good sign.
Click to expand...
Click to collapse
sorry for all of this and thank you very much for your help but when I put the phone in recovery mode by pressing the down volume and power key and connect the phone to the pc it is not recognized by the pc so I can't flash the room
Hi All
I have a ulefone power 3 which isnt modified at all , my problem is its stuck in a boot loop and not sure what to do
when i hold up and power and go into recovery it just keeps rebooting so cannot do anything, kinda new to any kind of flashing but does anyone have any ideas on what i need to do please
thanks
I think you need to flash your phone like this : http://ulefone.com/download/power3.html
same with power 3s
UPDATE: It was possible to flash the phone, but now i have some "shifted" lines on my display
UPDATE2: After performing an wireless update, everything works fine again (without twrp)
Hi, I have the same problem,
Ulefon Power 3s, after i tried to install twrp (everything worked like in the deskription at https://forum.xda-developers.com/android/development/ulefone-power-3-twrp-3-2-1-0-root-t3741853)
The phone is stuck in a bootloop (Orange State like https://img.xda-cdn.com/2fPFK8gGwJxzn2rNTC6VzDxvLI8=/https://i.imgur.com/tLOV7sz.jpg?1)
When i press the power and volume up button the screen stays black and the phone still stays inthe bootloop.
Right now I am not able to stop this bootloop.
My tools are also to big to disconnect the batery.
I am not able to connect with my computer at this time.
I asked the smae at the twrp thread.
Any suggestions?
Thanks!
Hello i have the same problem i think this version of twrp do not work with the lastet firmwares from ulefone. I think the twrp have an issue with the rom version v40...
I also stuck in the bootloop and the only thing that i could do was a new flash...
Hi everyone.*
I'll give you a background on what has happened and would be appreciated you guys could offer some assistance or steer me to the right direction.
I have a Samsung Note Edge (SM-N915G) that suddently restarted randomly while it was sitting on my desk. The phone is not rooted and USB debugging was not switched on prior to crashing if I recall correctly.
The phone is now bootlooping or freezes at the optus screen. Sometimes its barely gets on the home screen before restarting again.
I have tried the below but with no success.
1. Replacing brand new batteries.
2. Changing the firmware through ODIN v3.13.1 (tried both old and current firmwares). It passes through ODIN but still the same problem.
3. Tried to recover data via programs like Dr. fone to recover the data but it keeps failing.
Basically I want to recover the data thats on the phone is my main concern, then recover the phone. Last option put it back to factory state.
Any help would be appreciated.
Hi , probably you was using fast charging option , and that reduces battery life.
So you said that you replaced new battery , you must be sure that is exactly like yours , because many store has a copy of batteries silimar like Original.
Next what you can try is to Wipe Cache Partition from recovery and if you are able to use your phone , go fast to the Settings and disable Fast Cable Charging.
See how to do that , I hope you fix this issue . : ) Good luck
Teddy Lo said:
Hi , probably you was using fast charging option , and that reduces battery life.
So you said that you replaced new battery , you must be sure that is exactly like yours , because many store has a copy of batteries silimar like Original.
Next what you can try is to Wipe Cache Partition from recovery and if you are able to use your phone , go fast to the Settings and disable Fast Cable Charging.
See how to do that , I hope you fix this issue . : ) Good luck
Click to expand...
Click to collapse
Yeps I used the original Samsung battery.
I have wiped the cache Partition and still the same thing.
I am unable to go into the phone as its in bootloop like I mentioned previously so no go disabling Fast charging.
NightOwlRoan said:
Yeps I used the original Samsung battery.
I have wiped the cache Partition and still the same thing.
I am unable to go into the phone as its in bootloop like I mentioned previously so no go disabling Fast charging.
Click to expand...
Click to collapse
Tell me are you able to enter into Download mode without Rebooting ?
Teddy Lo said:
Tell me are you able to enter into Download mode without Rebooting ?
Click to expand...
Click to collapse
Yes I am able to go into download mode via the normal way by restarting the phone and holding down volume down, home and power button. Then pressing up volume to enter download mode as normal
Try to flash this firmware with latest version of ODIN .
https://updato.com/firmware-archive-select-model?record=1103664FEDC511E69215FA163EE8F90B
Good Luck
Teddy Lo said:
Try to flash this firmware with latest version of ODIN .
https://updato.com/firmware-archive-select-model?record=1103664FEDC511E69215FA163EE8F90B
Good Luck
Click to expand...
Click to collapse
Ive just downloaded it and installed it.
Its been sitting on the Galaxy Note Edge Screen with the "recovery booting..." on top of the screen in blue.
Ill leave it for a while and see how it goes and let you know the outcome
NightOwlRoan said:
Ive just downloaded it and installed it.
Its been sitting on the Galaxy Note Edge Screen with the "recovery booting..." on top of the screen in blue.
Ill leave it for a while and see how it goes and let you know the outcome
Click to expand...
Click to collapse
I got "No command". Oh now it went through rebooting process after a while.
It was booting for several times. Now "Android is upgrading" green screen. Hoping it will be fixed after
NightOwlRoan said:
I got "No command". Oh now it went through rebooting process after a while.
It was booting for several times. Now "Android is upgrading" green screen. Hoping it will be fixed after
Click to expand...
Click to collapse
I got to my home screen for a few seconds before freezing, restarting and back to bootloop
NightOwlRoan said:
I got to my home screen for a few seconds before freezing, restarting and back to bootloop
Click to expand...
Click to collapse
Hi , try to wipe cache partition , and Factory reset your phone , if that doesn't help you or battery is problem or is some hardware issue like eMMC chip or power ic chip I don't know , try to boot your phone with his original battery .
Teddy Lo said:
Hi , try to wipe cache partition , and Factory reset your phone , if that doesn't help you or battery is problem or is some hardware issue like eMMC chip or power ic chip I don't know , try to boot your phone with his original battery .
Click to expand...
Click to collapse
Non of those worked as I have also tried them all before.
I'm trying to avoid factory reset as like I mentioned before
Could possibly be hardware issue.
If it is a power issue, then why am I able to still power up into download mode without turning off...