Hello,
this morning I found that my XU not start well, continually out messages "Unfortunately this application has stopped." This with a lot of applications and continuously. I have searched for possible solutions but none worked as I could not access the Titanium to back up, I thought of making a restore from CWM. Well, I said and done, I'm going to format system and then do the system restore to the last backup I had done and it's over. It has not rebooted. It always keeps the Sony Startup Logo. I think that the backup was defective and bricked my phone.
I tried to see if the PC Companion or Flashtool it detected but nothing.
Can you help me?
thanks
feli501 said:
Hello,
this morning I found that my XU not start well, continually out messages "Unfortunately this application has stopped." This with a lot of applications and continuously. I have searched for possible solutions but none worked as I could not access the Titanium to back up, I thought of making a restore from CWM. Well, I said and done, I'm going to format system and then do the system restore to the last backup I had done and it's over. It has not rebooted. It always keeps the Sony Startup Logo. I think that the backup was defective and bricked my phone.
I tried to see if the PC Companion or Flashtool it detected but nothing.
Can you help me?
thanks
Click to expand...
Click to collapse
flash ics firmware and restore using cwm recovery...
bharathbondfire said:
flash ics firmware and restore using cwm recovery...
Click to expand...
Click to collapse
I can not flash it because I do not start CMW, the phone stays in Sony logo. Also I can not put the rom on the SD because the computer does not recognize the SD card or mobile.
Can you tell me if there is any other way?
Thanks
feli501 said:
I can not flash it because I do not start CMW, the phone stays in Sony logo. Also I can not put the rom on the SD because the computer does not recognize the SD card or mobile.
Can you tell me if there is any other way?
Thanks
Click to expand...
Click to collapse
Try to flash firmware using FlashTool Download program and firmware. Open program, choose firmware, click "Flash". Hold VolDown and connect usb
AleXXnoD said:
Try to flash firmware using FlashTool Download program and firmware. Open program, choose firmware, click "Flash". Hold VolDown and connect usb
Click to expand...
Click to collapse
I've tryed to do that and this is the log of flashboot:
"27/050/2014 18:50:58 - INFO - <- This level is successfully initialized
27/050/2014 18:50:58 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
27/051/2014 18:51:15 - INFO - Selected ST25i / 6.1.1.B.1.10 /
27/051/2014 18:51:15 - INFO - Preparing files for flashing
27/051/2014 18:51:43 - INFO - Device disconnected
27/051/2014 18:51:48 - INFO - Device connected in flash mode
27/052/2014 18:52:35 - INFO - Device disconnected"
Then the phone stands with the sony logo in the screen and do nothing.
feli501 said:
I've tryed to do that and this is the log of flashboot:
"27/050/2014 18:50:58 - INFO - <- This level is successfully initialized
27/050/2014 18:50:58 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
27/051/2014 18:51:15 - INFO - Selected ST25i / 6.1.1.B.1.10 /
27/051/2014 18:51:15 - INFO - Preparing files for flashing
27/051/2014 18:51:43 - INFO - Device disconnected
27/051/2014 18:51:48 - INFO - Device connected in flash mode
27/052/2014 18:52:35 - INFO - Device disconnected"
Then the phone stands with the sony logo in the screen and do nothing.
Click to expand...
Click to collapse
That used to happen to me while using win 8/8.1
I suggest u to try the same using win 7
Also don't forget to install flashtool drivers
Sent from my ST25i using Tapatalk
kantry123 said:
That used to happen to me while using win 8/8.1
I suggest u to try the same using win 7
Also don't forget to install flashtool drivers
Sent from my ST25i using Tapatalk
Click to expand...
Click to collapse
Thank you, I've reached flashing it with WXP.
The phone works but I've missed my data
Thats where you nandroid comes in. Use nandroid manager(google play app) and extract the files from the nandroid
Sent from my Xperia P using Tapatalk
Related
Hi, I bricked my SE Xperia X10 Mini pro(u20i). I have root, recovery(CWM) and CyanoComb v1.4. When I rebooted phone, unlocked screen it shows errors about apps that they closed and than the phone rebooted. I can't do nothing, go to recovery is impossible. I tried flashtool but it's need to enable uknown sources an debugging but i can't go to system. SEUS didn't respond when i connect the phone with back button... HELP ME! Thanks
Edit: Now i see that the Flasher shows error after plugin phone in flash mode. HELP!
I looked into my magic glass bowl and saw that you did something and my future cards said you will have gotten some help. But not specifically.
I hope this disburdens yourself a bit.
Now after you cooled down and recognized that the information(s) you gave us is too unspecific you can go on to give more informations.
But first:
Doi you have the correct ftf file(s) for flashtool? Flashtool does not need to have anything enabled on your phone. Also SEUS should work. If not you bricked your phones hardware.
My guess is you did not correctly follow the instructions to use SEUS. Follow them step by step. They are well explained. Possibly you haven't the correct driver on your PC... But this did not tell me my glass bowl, this stupid thing. May you tell us what operating system you use? Maybe reinstalling SEUS will help. Do you have the actual VFewrson of SEUS? I guess SEUS is the better choice then flashtool for you. (both do the same but flashtool can flash other roms)
Good luck.
I have W7 and XP, i tried SEUS and Flashtool on both. I downloaded UK 2.1 ROM and than I did .ftf file. After i enter flash mode in Flashtool it say: Error Flashin Aborted, Now unplug your device and power it on, turn on Uknown sources and Debugging.
In SEUS, when it ask to turn in flash mode, I do it but SEUS didn't recognize my device.
26/007/2011 21:07:38 - INFO - Preparing files for flashing
26/007/2011 21:07:45 - INFO - Searching Xperia....
26/007/2011 21:07:46 - ERROR - Please plug you device in flash mode
26/007/2011 21:07:47 - INFO - Searching Xperia....
26/007/2011 21:07:47 - ERROR - Please plug you device in flash mode
26/007/2011 21:07:48 - INFO - Searching Xperia....
26/007/2011 21:07:49 - ERROR - Please plug you device in flash mode
26/007/2011 21:07:50 - INFO - Searching Xperia....
26/007/2011 21:07:50 - ERROR - Please plug you device in flash mode
26/007/2011 21:07:51 - INFO - Searching Xperia....
26/007/2011 21:07:51 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&F9CB627&0&1
26/007/2011 21:07:51 - INFO - Start Flashing
26/007/2011 21:07:51 - INFO - VER="R8A026";DATE="20100412";TIME="11:41:00";
26/007/2011 21:07:55 - ERROR - Error flashing. Aborted
26/007/2011 21:07:55 - INFO - Now unplug the device and power it on
26/007/2011 21:07:55 - INFO - Then go to application settings
26/007/2011 21:07:55 - INFO - turn on Unknown Sources and Debugging
@wOrHeR SvK: i had the same behaviour with Flashtool, so i powered off the device, powered on in flash mode and reflashed with FlashTool, after that it was flashed fine (don't follow the ending message to activate unknown sources and other crap, you don't need it... focus only at flash stage, that's what you need).
By the way Snoopo is right, flashing with SEUS (open application and search for "repair your phone" or something like that) does the job in every circumstance but hardware failure.
Good luck!
nothing... I turned on in flash mode and than click flash in Flashtool. Same problem... SEUS can't recognize... I Don't know why but before it was OK
tommorow i will go to my friend and try it at his PC
redownload the ftf file... did you possibly load a mini (u10) file instead a x10 mini pro (u20)?
did you use the right version of Flashtool? The one from Androxyde/Bin4ry [http://forum.xda-developers.com/showthread.php?t=920746]?
Use SEUS to reinstall your ROM
yeah, tried 0.2.8 and 0.2.9.1. SEUS still not working...
Correct Flashfiles are here: http://forum.xda-developers.com/showthread.php?t=826455
And SEUS also should work. What are the error messages? Make sure your phone is really OFF, start SEUS choose "x10 mini pro" (NOT "mini pro" without "x10" - this is a coplete new model and not really released yet) and go through the process until it says you have to connect your phone and do it exaclty like it is explained: hold the back-button while you are connecting your phone hold it down as long as it is looking for your phone when it starts flashing you can release the button. there should be the green indicator LED showed while the restore is running.
The Flashtool ones you pasted look like the flashmode is started successfully but it is possibly a wrong flash file. So try the correct one(s) (rename the .rar file downloaded from page above into .ftf)
otherwise you really bricked your boot partition and can try if SE wants to rescue your phone or if it says that your warranty is void...
SEUS still nothing, tried everything... Flashtool: when i first turn phone on to flash mode and than click flash in flashtool, it say Start Flashing and than the Error but when it says the error the green led is off and the phone is going to start... any idea ?
also SEUS isn't showing any errors, just say that i have to connect phone in flash mode...
I can boot to system but in system it showing errors about apps thah must close.... That isn't bricked boot patriton i think.
wOrHeR SvK said:
SEUS still nothing, tried everything... Flashtool: when i first turn phone on to flash mode and than click flash in flashtool, it say Start Flashing and than the Error but when it says the error the green led is off and the phone is going to start... any idea ?
also SEUS isn't showing any errors, just say that i have to connect phone in flash mode...
I can boot to system but in system it showing errors about apps thah must close.... That isn't bricked boot patriton i think.
Click to expand...
Click to collapse
You have DEFINATLY got the device drivers?
Dev area
should be moved, but noobs dont read the stickies
I have installed drivers with ggsetup
I asked ide Dev area beacause this area read more people than Question area
wOrHeR SvK said:
I have installed drivers with ggsetup
I asked ide Dev area beacause this area read more people than Question area
Click to expand...
Click to collapse
not for brick questiions ! The ansers always the same to noobs seus is not pc companion
i know what is SEUS and what is PC Companion I'm no n00b but SEUS and FlashTool is not working for me, i try it on another PC, with another USB cable...
wOrHeR SvK said:
I have installed drivers with ggsetup
I asked ide Dev area beacause this area read more people than Question area
Click to expand...
Click to collapse
its driver problem
ggsetup driver wont work with flash tool or sony update
remove driver then install seus
download seus from here http://www.sonyericsson.com/cws/support/mobilephones/downloads/subject/updateservice/xperiax10minipro?cc=us&lc=en
its Update Service not pc companion
it will work 100 % if you have right driver and not failed phone hardware
USB Driver for x10mini
download USB driver from here
http://developer.sonyericsson.com/wportal/devworld/downloads/download/dw-x10minidrivers?cc=gb&lc=en
wOrHeR SvK said:
i know what is SEUS and what is PC Companion I'm no n00b but SEUS and FlashTool is not working for me, i try it on another PC, with another USB cable...
Click to expand...
Click to collapse
Hmmmmmmm.
Hello everyone, it's noob number #16723009. This poor noob in question was so fascinated by the world of rooting , kernels and roms, so he got a bit too far ahead of himself! So I experimented with rooting my Sony Xperia Go and trying a few different Rom's. End result: Sony bootscreen brick.
And unfortunately no backups were made.
So this is order of actions:
1) root with Root_with_Restore_by_Bin4ry_v18 XDA link
2) installed Clockwork Mod recovery XDA link
3) in CWM Recovery wipe data/factory reset, wipe cache partition, wipe dalvik cache
4) in CWM Recovery install zip from sdcard: Speedydroid v15 XDA link , in Aroma I deleted "unnecessary" bloatware (resulting with a semi-functional rom, nice fast and snappy but for instance pictures didn't open)
5) Same procedure as nr 3.
6) in CWM recovery install zip from sdcard: TheBrainsRom v4 XDA link , (resulting in a continous loop between sony and the rom bootscreen).
7) PANIC PANIC! in CWM recovery under mounts and storage menu : format system or format cache (don't remember)
Finally resulting me with a phone, which hangs at SONY logo. Volume up + powerbutton reset works.
I tried Flashtool's flashmode to install the stockrom, resulting in red" ERROR, flash aborted" in the log. Sometimes the Sony PC companion popup with " Sony xperia go connected" comes up while I'm trying to flash, but it disappears in ~5 secs. So when I hold the Volume Down button when I connect the usb cable, the indicator light does go Green, but it turns red in ~5 sec and the phone goes back to the SONY logo
Log:
26/042/2013 16:42:00 - INFO - Selected st27i_6.0.B.3.184_Original.ftf
26/042/2013 16:42:00 - INFO - Preparing files for flashing
26/042/2013 16:42:07 - INFO - Please connect your device into flashmode.
26/042/2013 16:42:26 - INFO - Device connected in flash mode
26/042/2013 16:42:26 - INFO - Opening device for R/W
26/042/2013 16:42:26 - INFO - Start Flashing
26/042/2013 16:42:26 - INFO - Processing loader
26/042/2013 16:42:26 - INFO - Checking header
26/042/2013 16:42:26 - INFO - Ending flash session
26/042/2013 16:42:26 - ERROR -
26/042/2013 16:42:26 - ERROR - Error flashing. Aborted
26/042/2013 16:42:26 - INFO - Device connected in flash mode
26/042/2013 16:42:34 - INFO - Device disconnected
I also tried PC companion "repair my phone" option. Nothing just happens after Vol Down + usb cable in procedure.
Also the same problem with Sony Update Service.
I have googled and read stuff about this issue for solid 8 hours, no one seems to have the same exact issue. Should I start thinking of it as paperweight or is there hope ?
U r not connecting the phone properly while flashing
Make sure phone is off and disconnected
Go to flashtool and select ur file and click flash
Now it will prepare files and ask u to connect ur phone
When it asks ,make sure ur phone is switched off
Just press the volume down button ( keep it pressed) and connect to usb and wait for flashing to b finished
drsanket_xperia_u said:
U r not connecting the phone properly while flashing
Make sure phone is off and disconnected
Go to flashtool and select ur file and click flash
Now it will prepare files and ask u to connect ur phone
When it asks ,make sure ur phone is switched off
Just press the volume down button ( keep it pressed) and connect to usb and wait for flashing to b finished
Click to expand...
Click to collapse
I am actually doing it the exact way you described. Still no use.
please , suggest some solution... i have same problem with my xperia sola.. pllzzzzzzzzzzzzzzz help
Which os on computer?? Did u installed flashmode drivers?
I get the same problem sometimes. I usually fixed it by using a different USB port. Try that
Sent from my Xperia Yoo
CrazyXperiaA said:
I get the same problem sometimes. I usually fixed it by using a different USB port. Try that
Sent from my Xperia Yoo
Click to expand...
Click to collapse
My OS is Win 8 64 bit, yes I do have Flashmode drivers installed, I will try different usb ports, thanks!
EDIT: It did not work on any USB 3.0 port on my asus n56vz. I installed flashtool, copied the tft to my old win7 lenovo x61s laptop with usb 2.0 ports, 3 tries and it worked ! Thanks fellas!
Hi
I'm having problem with flashing kernels with Flashtool. My bootloader is unlocked (I'm running FXP CM9 ROM). I've tried different versions of flashtool, different kernels and spent all of the free time in past week searching for sollution.
Here's the log:
Code:
17/001/2013 13:01:52 - INFO - <- This level is successfully initialized
17/001/2013 13:01:52 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
17/001/2013 13:01:52 - INFO - You can drag and drop ftf files here to start flashing them
17/001/2013 13:01:57 - INFO - Device disconnected
17/030/2013 13:30:29 - INFO - Selected kernel-4.2.1-v21.ftf
17/030/2013 13:30:29 - INFO - Preparing files for flashing
17/030/2013 13:30:29 - INFO - Please connect your device into flashmode.
17/030/2013 13:30:35 - INFO - Device connected in flash mode
17/030/2013 13:30:35 - INFO - Opening device for R/W
17/030/2013 13:30:36 - INFO - Start Flashing
17/030/2013 13:30:36 - INFO - Processing loader
17/030/2013 13:30:36 - INFO - Checking header
17/030/2013 13:30:36 - INFO - Ending flash session
17/030/2013 13:30:36 - ERROR -
17/030/2013 13:30:36 - ERROR - Error flashing. Aborted
17/030/2013 13:30:36 - INFO - Device connected in flash mode
I would really love to try out Android 4.2 on X10, can you help me please?
Is usb debugging enabled on your phone?
Sent from my X10 using xda premium
dunc4n88 said:
Is usb debugging enabled on your phone?
Sent from my X10 using xda premium
Click to expand...
Click to collapse
Well, that could be the problem, debugging mode is always disabled after phone reboot, so maybe it gets disabled immediately after power off... Is there any other way to enable debugging mode?
So any ideas? Please, I'm stuck on unstable CM9
Maybe try restoring your phone to factory stock with PC companion? Then root, install cwm and flash whatever?
Just throwing out ideas Lol
Sent from my LT30p using xda premium
Are the drivers installed on the pc?
Sent from my X10i using xda premium
LegibleEel said:
Maybe try restoring your phone to factory stock with PC companion? Then root, install cwm and flash whatever?
Just throwing out ideas Lol
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
It's not possible, PC Companion won't repair my phone (I guess it's because of unlocked bootloader).
dunc4n88 said:
Are the drivers installed on the pc?
Sent from my X10i using xda premium
Click to expand...
Click to collapse
I made sure drivers are installed
mares927 said:
It's not possible, PC Companion won't repair my phone (I guess it's because of unlocked bootloader).
Click to expand...
Click to collapse
Doesn't matter if you have a unlocked bootloader or not. You can still repair through PC companion.
Anywho, does your phone stay in flash mode? Green light stays on?
Also are you able to get in to clockwork mod recovery?
Sent from my LT30p using xda premium
LegibleEel said:
Doesn't matter if you have a unlocked bootloader or not. You can still repair through PC companion.
Anywho, does your phone stay in flash mode? Green light stays on?
Also are you able to get in to clockwork mod recovery?
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
Yes, green led is on and I can get to CWM recovery (my phone normally works).
I tried to repair it with PC Companion, but I'm stuck on screen when it says "Make sure that the battery is charged to at least 50%..." and so on...
When I try to boot my phone, the sony logo shows up and then nothing happens. I have CWM installed but pressing vol. down doesn't open the recovery. I tried to flash stock firmware using flashtool, but when I connect phone in flashmode/fastboot mode, the phone connects properly for about 10 seconds, then boots and again stuck at sony logo.
I know I'm supposed to connect only when flashtool says to connect the phone, and doing just that but still not working. Please help!
hoodakaushal said:
When I try to boot my phone, the sony logo shows up and then nothing happens. I have CWM installed but pressing vol. down doesn't open the recovery. I tried to flash stock firmware using flashtool, but when I connect phone in flashmode/fastboot mode, the phone connects properly for about 10 seconds, then boots and again stuck at sony logo.
I know I'm supposed to connect only when flashtool says to connect the phone, and doing just that but still not working. Please help!
Click to expand...
Click to collapse
It'sa good thing you forgot to mention what windows version you are on or ig you have used flashtool before on that PC so we can waste some time while you waiting for help.
Is your phone completely turned off when you are trying to connect in flash mode?
ChikeD said:
It'sa good thing you forgot to mention what windows version you are on or ig you have used flashtool before on that PC so we can waste some time while you waiting for help.
Is your phone completely turned off when you are trying to connect in flash mode?
Click to expand...
Click to collapse
Sorry. I'm on Windows 8, and yes, I've used flashtool before. I also tried to flash from a different pc with windows 7, and the same problem is there.
Yes, phone is completely turned off when trying to connect in flash mode.
Here's the log for flashtool:
29/050/2013 11:50:50 - INFO - <- This level is successfully initialized
29/050/2013 11:50:50 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
29/050/2013 11:50:55 - INFO - Device disconnected
29/051/2013 11:51:18 - INFO - Selected LT22i / 6.2.A.1.400 / India_acervenky
29/051/2013 11:51:18 - INFO - Preparing files for flashing
29/051/2013 11:51:18 - INFO - Please connect your device into flashmode.
29/059/2013 11:59:20 - INFO - Device connected in flash mode
29/059/2013 11:59:20 - INFO - Opening device for R/W
29/059/2013 11:59:24 - INFO - Start Flashing
29/059/2013 11:59:24 - INFO - Processing loader.sin
29/059/2013 11:59:24 - INFO - Checking header
29/059/2013 11:59:24 - INFO - Ending flash session
29/059/2013 11:59:24 - ERROR -
29/059/2013 11:59:24 - ERROR - Error flashing. Aborted
29/059/2013 11:59:25 - INFO - Device connected in flash mode
29/059/2013 11:59:26 - INFO - Device disconnected
29/000/2013 12:00:39 - INFO - Device connected in fastboot mode
29/000/2013 12:00:47 - INFO - Device disconnected
@hoodakaushal
I assumed you used it before, I asked if you have used it on that PC.
Try latest version of flashtool: http://www.flashtool.net/
See the FAQ for instructions to install on windows 8.
Also, USB 3 ports won't work, so use USB 2 ports or if you don't have those look at the BIOS for option to switch from xHCI to EHCI.
ChikeD said:
@hoodakaushal
Also, USB 3 ports won't work, so use USB 2 ports or if you don't have those look at the BIOS for option to switch from xHCI to EHCI.
Click to expand...
Click to collapse
Yeah, alreaady figured out that was the problem, tried USB 2 and worked fine. Thanks though! :good:
hoodakaushal said:
Yeah, alreaady figured out that was the problem, tried USB 2 and worked fine. Thanks though! :good:
Click to expand...
Click to collapse
Same problem. Even after using usb 2.0, it stays in flash mode for a few seconds then the sony logo starts in a loop again. Cant access cwm or flash mode. What should I do?
I was trying to flash a new kernel in my phone, how ever i counld not boot in recovery mode, after some googling i found out that to enter the recovery mode i had to install an ics version (i curently have jb 4.1.2) i followed the instructions on a in youtube video.
But when i was finished and tryied to boot up my phone nothing worked it only vibrates once and dosent even light the screen it only blinks red light and when i try flashboot mode it blinks a purple light.
When i try to connect it to my pc via usb it doesn't even recognize its a phone.
When i tryied to connect it to my pc to try and use Update service it blinks green light.
Sometimes when i connect my phone to my pc via usb i can see it in my device manager as an USB MTP device.
Also when i try to charge it blinks a green or a red light for a shortwhile, then the light stop blinking, and then does nothing.
Can someone help me please?
huh
karafliaris said:
I was trying to flash a new kernel in my phone, how ever i counld not boot in recovery mode, after some googling i found out that to enter the recovery mode i had to install an ics version (i curently have jb 4.1.2) i followed the instructions on a in youtube video.
But when i was finished and tryied to boot up my phone nothing worked it only vibrates once and dosent even light the screen it only blinks red light and when i try flashboot mode it blinks a purple light.
When i try to connect it to my pc via usb it doesn't even recognize its a phone.
When i tryied to connect it to my pc to try and use Update service it blinks green light.
Sometimes when i connect my phone to my pc via usb i can see it in my device manager as an USB MTP device.
Also when i try to charge it blinks a green or a red light for a shortwhile, then the light stop blinking, and then does nothing.
Can someone help me please?
Click to expand...
Click to collapse
i've been in the same situation with my xperia p, don't worry it can be fixed. download a tft file and flash it with flashtool.
there are many tutorials on xda how to do that. its all good man, don't worry.
rownz1337 said:
i've been in the same situation with my xperia p, don't worry it can be fixed. download a tft file and flash it with flashtool.
there are many tutorials on xda how to do that. its all good man, don't worry.
Click to expand...
Click to collapse
How to flash with flashtool if i can't connect my phone to my pc?
rownz1337 said:
i've been in the same situation with my xperia p, don't worry it can be fixed. download a tft file and flash it with flashtool.
there are many tutorials on xda how to do that. its all good man, don't worry.
Click to expand...
Click to collapse
Something is wrong, here is what it says in flashtool:
17/006/2014 00:06:19 - INFO - Device connected in flash mode
17/006/2014 00:06:20 - INFO - Start Flashing
17/006/2014 00:06:20 - INFO - Processing loader.sin
17/006/2014 00:06:20 - INFO - Checking header
17/006/2014 00:06:20 - ERROR - Processing of loader.sin finished with errors.
17/006/2014 00:06:20 - INFO - Ending flash session
17/006/2014 00:06:20 - ERROR -
17/006/2014 00:06:20 - ERROR - Error flashing. Aborted
17/006/2014 00:06:20 - INFO - Device connected in flash mode
17/006/2014 00:06:26 - INFO - Device disconnected
https://www.youtube.com/watch?v=FzOPuvnJGq4
i managed to flash my phone with the official 4.1.2 JB and it opened but the touchscreen didn't work.
and then i flashed it with an ICS rom but I EXCLUDED THE KENEL and opened my phone and, for a second appeared the sony logo, then nothing worked.
Just installed the 4.0.4 from the description of the youtube video and it works. thx man :laugh:
i have a problem with my superuser "can't find SU"
karafliaris said:
i have a problem with my superuser "can't find SU"
Click to expand...
Click to collapse
If you flash phone with stock rom you need root phone again
http://forum.xda-developers.com/showthread.php?t=1886460
shoT. said:
If you flash phone with stock rom you need root phone again
http://forum.xda-developers.com/showthread.php?t=1886460
Click to expand...
Click to collapse
I locked my bootloader > updated via pc companion to 4.1.2 > ulocked bootloader > rooted with the help of this link http://untitled-community.blogspot.gr/2014/02/how-to-root-and-install-cwm-recovery.html
thnx man