Hi, I bricked my SE Xperia X10 Mini pro(u20i). I have root, recovery(CWM) and CyanoComb v1.4. When I rebooted phone, unlocked screen it shows errors about apps that they closed and than the phone rebooted. I can't do nothing, go to recovery is impossible. I tried flashtool but it's need to enable uknown sources an debugging but i can't go to system. SEUS didn't respond when i connect the phone with back button... HELP ME! Thanks
Edit: Now i see that the Flasher shows error after plugin phone in flash mode. HELP!
I looked into my magic glass bowl and saw that you did something and my future cards said you will have gotten some help. But not specifically.
I hope this disburdens yourself a bit.
Now after you cooled down and recognized that the information(s) you gave us is too unspecific you can go on to give more informations.
But first:
Doi you have the correct ftf file(s) for flashtool? Flashtool does not need to have anything enabled on your phone. Also SEUS should work. If not you bricked your phones hardware.
My guess is you did not correctly follow the instructions to use SEUS. Follow them step by step. They are well explained. Possibly you haven't the correct driver on your PC... But this did not tell me my glass bowl, this stupid thing. May you tell us what operating system you use? Maybe reinstalling SEUS will help. Do you have the actual VFewrson of SEUS? I guess SEUS is the better choice then flashtool for you. (both do the same but flashtool can flash other roms)
Good luck.
I have W7 and XP, i tried SEUS and Flashtool on both. I downloaded UK 2.1 ROM and than I did .ftf file. After i enter flash mode in Flashtool it say: Error Flashin Aborted, Now unplug your device and power it on, turn on Uknown sources and Debugging.
In SEUS, when it ask to turn in flash mode, I do it but SEUS didn't recognize my device.
26/007/2011 21:07:38 - INFO - Preparing files for flashing
26/007/2011 21:07:45 - INFO - Searching Xperia....
26/007/2011 21:07:46 - ERROR - Please plug you device in flash mode
26/007/2011 21:07:47 - INFO - Searching Xperia....
26/007/2011 21:07:47 - ERROR - Please plug you device in flash mode
26/007/2011 21:07:48 - INFO - Searching Xperia....
26/007/2011 21:07:49 - ERROR - Please plug you device in flash mode
26/007/2011 21:07:50 - INFO - Searching Xperia....
26/007/2011 21:07:50 - ERROR - Please plug you device in flash mode
26/007/2011 21:07:51 - INFO - Searching Xperia....
26/007/2011 21:07:51 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&F9CB627&0&1
26/007/2011 21:07:51 - INFO - Start Flashing
26/007/2011 21:07:51 - INFO - VER="R8A026";DATE="20100412";TIME="11:41:00";
26/007/2011 21:07:55 - ERROR - Error flashing. Aborted
26/007/2011 21:07:55 - INFO - Now unplug the device and power it on
26/007/2011 21:07:55 - INFO - Then go to application settings
26/007/2011 21:07:55 - INFO - turn on Unknown Sources and Debugging
@wOrHeR SvK: i had the same behaviour with Flashtool, so i powered off the device, powered on in flash mode and reflashed with FlashTool, after that it was flashed fine (don't follow the ending message to activate unknown sources and other crap, you don't need it... focus only at flash stage, that's what you need).
By the way Snoopo is right, flashing with SEUS (open application and search for "repair your phone" or something like that) does the job in every circumstance but hardware failure.
Good luck!
nothing... I turned on in flash mode and than click flash in Flashtool. Same problem... SEUS can't recognize... I Don't know why but before it was OK
tommorow i will go to my friend and try it at his PC
redownload the ftf file... did you possibly load a mini (u10) file instead a x10 mini pro (u20)?
did you use the right version of Flashtool? The one from Androxyde/Bin4ry [http://forum.xda-developers.com/showthread.php?t=920746]?
Use SEUS to reinstall your ROM
yeah, tried 0.2.8 and 0.2.9.1. SEUS still not working...
Correct Flashfiles are here: http://forum.xda-developers.com/showthread.php?t=826455
And SEUS also should work. What are the error messages? Make sure your phone is really OFF, start SEUS choose "x10 mini pro" (NOT "mini pro" without "x10" - this is a coplete new model and not really released yet) and go through the process until it says you have to connect your phone and do it exaclty like it is explained: hold the back-button while you are connecting your phone hold it down as long as it is looking for your phone when it starts flashing you can release the button. there should be the green indicator LED showed while the restore is running.
The Flashtool ones you pasted look like the flashmode is started successfully but it is possibly a wrong flash file. So try the correct one(s) (rename the .rar file downloaded from page above into .ftf)
otherwise you really bricked your boot partition and can try if SE wants to rescue your phone or if it says that your warranty is void...
SEUS still nothing, tried everything... Flashtool: when i first turn phone on to flash mode and than click flash in flashtool, it say Start Flashing and than the Error but when it says the error the green led is off and the phone is going to start... any idea ?
also SEUS isn't showing any errors, just say that i have to connect phone in flash mode...
I can boot to system but in system it showing errors about apps thah must close.... That isn't bricked boot patriton i think.
wOrHeR SvK said:
SEUS still nothing, tried everything... Flashtool: when i first turn phone on to flash mode and than click flash in flashtool, it say Start Flashing and than the Error but when it says the error the green led is off and the phone is going to start... any idea ?
also SEUS isn't showing any errors, just say that i have to connect phone in flash mode...
I can boot to system but in system it showing errors about apps thah must close.... That isn't bricked boot patriton i think.
Click to expand...
Click to collapse
You have DEFINATLY got the device drivers?
Dev area
should be moved, but noobs dont read the stickies
I have installed drivers with ggsetup
I asked ide Dev area beacause this area read more people than Question area
wOrHeR SvK said:
I have installed drivers with ggsetup
I asked ide Dev area beacause this area read more people than Question area
Click to expand...
Click to collapse
not for brick questiions ! The ansers always the same to noobs seus is not pc companion
i know what is SEUS and what is PC Companion I'm no n00b but SEUS and FlashTool is not working for me, i try it on another PC, with another USB cable...
wOrHeR SvK said:
I have installed drivers with ggsetup
I asked ide Dev area beacause this area read more people than Question area
Click to expand...
Click to collapse
its driver problem
ggsetup driver wont work with flash tool or sony update
remove driver then install seus
download seus from here http://www.sonyericsson.com/cws/support/mobilephones/downloads/subject/updateservice/xperiax10minipro?cc=us&lc=en
its Update Service not pc companion
it will work 100 % if you have right driver and not failed phone hardware
USB Driver for x10mini
download USB driver from here
http://developer.sonyericsson.com/wportal/devworld/downloads/download/dw-x10minidrivers?cc=gb&lc=en
wOrHeR SvK said:
i know what is SEUS and what is PC Companion I'm no n00b but SEUS and FlashTool is not working for me, i try it on another PC, with another USB cable...
Click to expand...
Click to collapse
Hmmmmmmm.
Related
Today i updated my NEO in PC Companion software. Now after update it wont boot.
If i long press the power bottun it just vibrates shortly and nothing happens, sometimes i get a short green flash from the led. but nothing else.
what to do?
Hi bro more info needed.
Like what were you on ,firmware.....
Were you rooted .or open bootloader
Or was it just new / or on 2.3.2 to 2.3.3/4
Could the download of the file in sony ericsson be corrupt
......let is know
Sent from my MT15i using xda premium
http://androidflip.com/how-to-update-sony-ericsson-xperia-neo-to-2-3-4-gingerbread-update/
That's all you need.
sent from Xperia neo
kormatoes said:
Hi bro more info needed.
Like what were you on ,firmware.....
Were you rooted .or open bootloader
Or was it just new / or on 2.3.2 to 2.3.3/4
Could the download of the file in sony ericsson be corrupt
......let is know
Sent from my MT15i using xda premium
Click to expand...
Click to collapse
ok here's the deal... its my wifes phone and she updated last night. So i really dont know what version firmware was on it before, but the update that was applied was the new .283 update.
It was not rooted and not messed with booloader or anything, just stock 2.3.3.
himanshpahwa said:
http://androidflip.com/how-to-update...rbread-update/
That's all you need.
sent from Xperia neo
Click to expand...
Click to collapse
Is this the way to do it? Can i keep the settings/data this way?
Just go ahead and follow the steps
I'm sure it will work for you.
But the data will be lost.
sent from Xperia neo
Good luck with following the steps and let us know if you have any trouble with it, hope you can get the phone unbricked.
Thank you all, for your help!
Actually I just unticked, the "wipe data" box in flash tools and the phone is now updated and fully working with all data intact... :-D
Thank God for xda!
Hello, can you please help me! I bricked my xperia neo, while trying to update se tweaked rom v 8.5. Now i'm facing the "sony ericsson" screen, totaly blocked. I've tried many times to flash it, whith wotan client, flash tool, but it's imposible to enter flash mode again, no green led, only bocked se screen, please help!!!
follow my thread and everything will be fine.
http://forum.xda-developers.com/showthread.php?t=1324707
04/025/2012 13:25:50 - ERROR - Please plug you device in flash mode
04/025/2012 13:25:51 - INFO - Searching Xperia....
04/025/2012 13:25:51 - ERROR - Please plug you device in flash mode
04/025/2012 13:25:52 - INFO - Searching Xperia....
04/025/2012 13:25:52 - ERROR - Please plug you device in flash mode
04/025/2012 13:25:53 - INFO - Searching Xperia....
04/025/2012 13:25:53 - ERROR - Please plug you device in flash mode, etc my phone cannot be seen no more by the pc, but it worked perfect in the past flash mode, fastboot mode "se" screen pops up whithout turnig on the phone and remains, dont know what happened to this phone
Take your battery for at least 5 seconds.
Put it back again.
Press back button and connect the cable with the back button pressed.
Then start fota unbrick.
Try it several times.
Sometimes and thats weird the computer as problems connecting to phone.
I warrant you that the thing works and you are with the right problem.
Your trim area is damaged.
Thanks! I've tried like 50 times, and nothing, the ennoing "sony ericsson" is booting (no sony ericsson logo as usualy, just the writing) I flashed 10 times in the past whith no problem. Now, even when I put it to charge ( wall charge) the phone is turning on showing that stupid "sony ericsson" writting, I cant shut it down from the on\off button. Before killling it, I've instales stock MT15i_4.0.A.2.368_GLOBAL ROM, then I upgraded to MT15i_4.0.2.A.0.42_Global, then rooted with DooMLoRD_v4_ROOT-zergRush-busybox-su, Installed CWM( wiped cache, updated SE tweaked v8.5 Rom) After the restart, the "se" writting started booting. I've pulled out the batery, and begined flashing it with flash tool(no green led).The flashing started and my little brother accidentaly pulled out the Usb cable; that's the whole story! I've tried like 100 times with wotan, flash tool and FlashTool_0.2.9.1_FOTAUnbrick, no result, even if pc companion tells me "phone conected" and gives me further instructions whith the phone being dead, and the flash tool showing me to connect de device... Thank you for all the help, hope there is a solution. sorry for the long post and my bad english...
---------- Post added at 11:45 PM ---------- Previous post was at 11:28 PM ----------
04/040/2012 23:40:02 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:04 - INFO - Device disconnected
04/040/2012 23:40:06 - INFO - Device connected with USB debugging off
04/040/2012 23:40:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:07 - INFO - Device disconnected
04/040/2012 23:40:10 - INFO - Device connected with USB debugging off
04/040/2012 23:40:10 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:18 - INFO - Device disconnected
04/040/2012 23:40:35 - INFO - Device connected with USB debugging off
04/040/2012 23:40:35 - INFO - For 2011 devices line, be sure you are not in MTP mode
Flash tooll results when trying to connect (pulling batery-10 secs, back butoon, usb cable)
Look, read carefully.
You can´t have that log, this log shows that your phone is connected (powered on).
Withou green line you re not ready to go.
Just follow as I´ve writted before.
Battery of for 5 secs. take the back button and plug the cable. After that you must run fota unbrick.
then just flash and your phone should be good.
If not PM and I give you another solution.
Thank you again! I tried, my phone was bricked before, but I've managed every time to get into the flash mode, and flashing it succesfully. This time is bad, i pulled the batery out for hours, coonect the batery-nothing happens, push the back button-nothing happens, While holding the back button-conect the usb port to pc-after 3-4 secs, that "sony ericsson" screen apears (no green logo, just the writting) no green led, somehow pc companion tells me i'm "connected" and shows me further steps, but on the phone it's just that "se" writting. No mather how bricked was my phone before, It allways got into the flash mode (1-4tries) I even reinstaled Windows, drivers, hope I want damage the usb port of the phone Have a great day!
Hi. as title, my X10 wont turn on or charge or being detected by PC companion.
before this happens, my battery was having problem of not charging or difficulty to charge.. when the battery was low, i was in xrecovery(accidently) and then rebooted it. so right now i cant turn on or even charge or being detected by Pc companion.. no green/red light flashing..
any help here please? thanks!
Hey, did you try with another battery of another xperia x10?
did you try to connect to flashtool?
Just to start a little troubleshooting
vichoh said:
Hey, did you try with another battery of another xperia x10?
did you try to connect to flashtool?
Just to start a little troubleshooting
Click to expand...
Click to collapse
hey
i have the same problem
wont respond on usb, tried different battery ( bought a new one ) tried to connect to flashtool
" 05/000/2012 19:00:22 - ERROR -
05/000/2012 19:00:22 - ERROR - Error flashing. Aborted
05/000/2012 19:00:24 - ERROR - Drivers need to be installed for connected device.
05/000/2012 19:00:24 - ERROR - You can find them in the drivers folder of Flashtool.
05/000/2012 19:00:25 - INFO - Device disconnected "
Tried installing the drivers, still didnt work, any suggestions ?!
goodbye x10..
just went to xperia service centre.. maybe a problem with the motherboard of the phone.. owh well..
semirkos said:
hey
i have the same problem
wont respond on usb, tried different battery ( bought a new one ) tried to connect to flashtool
" 05/000/2012 19:00:22 - ERROR -
05/000/2012 19:00:22 - ERROR - Error flashing. Aborted
05/000/2012 19:00:24 - ERROR - Drivers need to be installed for connected device.
05/000/2012 19:00:24 - ERROR - You can find them in the drivers folder of Flashtool.
05/000/2012 19:00:25 - INFO - Device disconnected "
Tried installing the drivers, still didnt work, any suggestions ?!
Click to expand...
Click to collapse
Everytime on the same PC? Did you try connect another? or WinXP and Win 7?
Did u try a SEUS repair?
Take battery out
Load SEUS and select model x10
When it says plug in holding back button attach USB only
Now hold back button while inserting battery
Green light?
If no try another USB cable
If that still doesn't work, id say it's a dead USB port on your phone
Sent from my Xperia X10 using xda premium
hey guys,
slowly i'm getting a little bit desperate actually i'm not sure, if my problem at the moment is flashtool or cyanogenmod 9.1 which brought ics on my phone or whatever. hope you can help me
i have an xperia ray and was on stock gingerbread 4.0.2.A.0.69 with baseband 8x55A-AAABQOAZM-203028D-66. but as the stock xperia included kraken facebook stuff, i finally wanted to get rid of it, so stock ics was no option. then i heard of cyanogenmod, which my friend had installed on his samsung galaxy s, and it worked perfectly there out of the box, so i wanted cm as well...
so on friday i installed cm9.1 stable from download.cyanogenmod.com/?type=stable&device=urushi following this guide: wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Ray:_Full_Update_Guide
everything worked fine except of no phone and mobile data connection. i researched, and it seems the xperia ray wants baseband 72 to work properly. so i installed latest flashtool 0.9.3.0, installed the proper drivers with flashtool-drivers.exe fomr flashtool folder "drivers" and tried. the second try i finally managed to get the ray's green light signaling flashmode, but flashtool disconnected in between, and on the ray one could see an image that looked like a glass with a green liquid in it... well, as flashtool had closed the connection, i waited a little bit and - as nothing happened - unplugged the usb cable and tried to reboot the ray fearing that i had bricked it. actually i didn't, the ray booted up, _and_ i had phone and mobile data connection! so i thought everything was fine even as my phone info still says "Baseband: 8x55A-AAABQOAZM-203028D-66". first i thought "anyways, everything works fine".
and so it seemed, but today as i was visting my parents, where i normally have a fine phone and mobile data connection, there was nearly nothing, and so i thought, i have to get bb72! but i don't get the ray into flashmode anymore
i read tons of guides, tried several variations of plugging and unplugging points of time... no way... somehow i also fear that my problem might be that flashtool wants the phone to have usb debugging and msc mode on, which i did, and when i start flashtool with the phone plugged in it says "Device connected with USB debugging on", but after the unplugging, shutting down the phone and connecting it again with the back-button pushed and holding it says "Device connected with USB debugging off" and "For 2011 devices line, be sure you are not in MTP mode". maybe that's because i don't get the device into "green light flashmode" or maybe (as i had read about meanwhile) because with ics msc isn't (fully) supported anymore?
so, can you please help me? any suggestions how i can get that baseband flashed on my phone? should i try it with the linux version of flashtool, or are there still any possibilities on windows (xp sp3)?
thx a lot, and by the way: phantastic work, that all you developing guys and helpers do for us!
my current system:
Phone: Xperia Ray (Urushi)
Android: 4.0.4 [ICS]
Baseband: 8x55A-AAABQOAZM-203028D-66
Kernel: 2.6.32.9-FXP [email protected] #1
Rom: Cyanogenmod 9.1.0-urushi
the flashtool log (looks always like this):
Code:
09/004/2012 18:04:47 - INFO - <- This level is successfully initialized
09/004/2012 18:04:47 - INFO - Flashtool Version 0.9.3.0 built on 2012-09-06 19:32:51
09/004/2012 18:04:47 - INFO - You can drag and drop ftf files here to start flashing them
09/004/2012 18:04:52 - INFO - Device connected with USB debugging on
09/004/2012 18:04:52 - INFO - Connected device : ST18
09/004/2012 18:04:52 - INFO - Installed version of busybox : BusyBox v1.20.2-cm9 bionic (2012-07-14 01:52 +0200) multi-call
binary.
09/004/2012 18:04:52 - INFO - Android version : 4.0.4 / kernel version : 2.6.32.9-FXP
09/004/2012 18:04:52 - INFO - Root Access Allowed
09/005/2012 18:05:08 - INFO - Selected ST18i_8x55A-AAABQOAZM-203028G-72_baseband.ftf
09/005/2012 18:05:08 - INFO - Preparing files for flashing
09/005/2012 18:05:08 - INFO - Please connect your device into flashmode.
09/005/2012 18:05:14 - INFO - Device disconnected
09/006/2012 18:06:28 - INFO - Device connected with USB debugging off
09/006/2012 18:06:28 - INFO - For 2011 devices line, be sure you are not in MTP mode
09/006/2012 18:06:38 - INFO - Device disconnected
09/006/2012 18:06:55 - INFO - Device connected with USB debugging off
09/006/2012 18:06:55 - INFO - For 2011 devices line, be sure you are not in MTP mode
09/007/2012 18:07:08 - INFO - Device disconnected
thx a lot!
lyrabee
EDIT: hey again... i finally managed to get into the green light flashmode somehow, but flashtool still says:
09/006/2012 18:06:55 - INFO - Device connected with USB debugging off
09/006/2012 18:06:55 - INFO - For 2011 devices line, be sure you are not in MTP mode
09/007/2012 18:07:08 - INFO - Device disconnected
so i looked around, if there is maybe any other way to get that baseband flashed on the system, and i found a thread called "[Q] Flashing .ftf file without flashtool?" that states, it was possible with fastboot: forum.xda-developers.com/showthread.php?t=1562110
so i'd like to try that. unfortunately that thread got stuck exactly at the point where it was about getting the right commands to flash certain files - e.g. for a baseband
what i did so far is: i renamed the baseband-ftf to zip and unzipped the zip. the following files are included:
adsp.sin
amss.sin
amss_fs_urushi.sin
apps_log.sin
fota0.sin
fota1.sin
loader.sin
plus a folder called META-INF, but i guess that one isn't needed.
to flash the boot.img, when installing cm9.1 the cm-guide posts that command:
fastboot -i 0xfce flash boot boot.img
the guy from the thread "[Q] Flashing .ftf file without flashtool?" posts those examples:
fastboot flash boot kernel.img
fastboot flash system system.img
fastboot flash userdata userdata.img
so, what are the commands to flash those "sins"? and do i have to use that "-i 0xfce" part, or is "fastboot flash" enough?
hope, someone can help me with that
thx a lot again!
lyrabee
Hi,
How are you trying to put your device in flashmode? If you do exactly what flashtool says, you wont get it.
You have to turn off your device, select flashmode in flashtool, press and hold Volume Down Key and then connect the phone to your PC.
The Back Key is not functioning for our Xperia, but Volume Down yes!
jomofer said:
Hi,
How are you trying to put your device in flashmode? If you do exactly what flashtool says, you wont get it.
You have to turn off your device, select flashmode in flashtool, press and hold Volume Down Key and then connect the phone to your PC.
The Back Key is not functioning for our Xperia, but Volume Down yes!
Click to expand...
Click to collapse
hi,
hm, i'll give it a try, but all the guides i found concerning the ray explicitly wrote about the back/return button like e.g. this one here talk.sonymobile.com/thread/24433
and as i wrote in my original post and in my edit i managed to get into green light mode with back/return button, but flashtool "just" didn't recognise that the ray anyways - despite it being connected with usb debugging and msc mode on - which is because of a problem concerning ics and msc mode i fear...
but i'll try it with volume down anyways. there can't happen more than before
is there anybody out there who possibly might help me with the fastboot solution?
lyrabee said:
hi,
hm, i'll give it a try, but all the guides i found concerning the ray explicitly wrote about the back/return button like e.g. this one here talk.sonymobile.com/thread/24433
and as i wrote in my original post and in my edit i managed to get into green light mode with back/return button, but flashtool "just" didn't recognise that the ray anyways - despite it being connected with usb debugging and msc mode on - which is because of a problem concerning ics and msc mode i fear...
but i'll try it with volume down anyways. there can't happen more than before
is there anybody out there who possibly might help me with the fastboot solution?
Click to expand...
Click to collapse
OMG! jomofer, you are my hero! it worked, it worked right away with the first try of using the volume down button :victory: i'm on baseband 72 now! thx thx thx again!!!11!
lyrabee
lyrabee said:
OMG! jomofer, you are my hero! it worked, it worked right away with the first try of using the volume down button :victory: i'm on baseband 72 now! thx thx thx again!!!11!
lyrabee
Click to expand...
Click to collapse
Also i dont know if it happens on the newer flashtool version but if you leave it connected to flashmode for too long it automatically breaks the connection. you should always drag'n'drop the ftf into flashtool and set alll that up and only enter flashmode when it tells you too after its all ready to go.
evilbarcode said:
Also i dont know if it happens on the newer flashtool version but if you leave it connected to flashmode for too long it automatically breaks the connection. you should always drag'n'drop the ftf into flashtool and set alll that up and only enter flashmode when it tells you too after its all ready to go.
Click to expand...
Click to collapse
hope, i won't have to flash around too often but thx for the tip
what i also found out accidentally yesterday, is the fact that msc actually works properly on ics/cm9.1, if you explicitly tell your device to connect as mass storage.
before the upgrade to ics i simply plugged the ray into the pc or mac, and the micro sdcard showed up like an additional volume. it didn't anymore after the upgrade. the device said something like "usb connected" in the info bar, but nothing more happened.
yesterday i checked that message in the info bar more accurately, even tapped on it, and tadaaa, the option was shown to "turn on usb storage": jayceooi.com/wp-content/uploads/2012/03/SGS2-ICS-USB-Mass-Storage.jpg
so easy and so far away simultaneously; unbelievable. anyways, i have "real" msc now again
yesterday I got xperia p with boot problem
it keeps rebooting after Xperia logo
I tried to flash it with Flashtool and SEtool but when I start falshing with flashtool it will stuck in reading device info
14/028/2012 13:28:17 - INFO - Device connected in flash mode
14/028/2012 13:28:45 - INFO - Selected LT22i_6.0.B.3.162_NCB.ftf
14/028/2012 13:28:45 - INFO - Preparing files for flashing
14/028/2012 13:28:54 - INFO - Please connect your device into flashmode.
14/028/2012 13:28:56 - INFO - Opening device for R/W
14/028/2012 13:28:56 - INFO - Reading device information
Click to expand...
Click to collapse
and when I try to flash it or getting device info with SEtool box it will stuck in "push volume down or back key and connect your device via usb" and the green bar get full and blank
it seems to be drivers problem so I installed all flashmode, fastboot and Xperia P adb drivers from flashtool drivers package
I also tried 2 windows PCs
1- Win 7 , 32 bit
2- Win XP
but no result
thanks in advance for all your helps
try to install pda.net it will re-install your driver.
mharckk said:
try to install pda.net it will re-install your driver.
Click to expand...
Click to collapse
I tried pdanet to re-install my drivers but its about adb drivers not flashmode
I also tried SUS and now I'm almost sure that this problem comes from Drivers cuz SUS doesn't recognize my device when the green led is on and in device manager my phone is named SEMC flash device and here I also changed the driver manually to STE8500.inf from flashtool driver
and there is no good result till now :|
Drivers
Its all about the drivers. Install SUS, Gordons Gate Flash Drivers, The Flash drivers from flash tool and finally turn off the phone holding power button and volume up for 30 seconds and try flashing it again
DavidMKD said:
Its all about the drivers. Install SUS, Gordons Gate Flash Drivers, The Flash drivers from flash tool and finally turn off the phone holding power button and volume up for 30 seconds and try flashing it again
Click to expand...
Click to collapse
Hi again
I do all things which might help updating drivers and so on
but no answer from phone
I thought that this might be because of boot problem
is there any way not use jtag or other ways of boot repair to do this job?
I was trying to flash a new kernel in my phone, how ever i counld not boot in recovery mode, after some googling i found out that to enter the recovery mode i had to install an ics version (i curently have jb 4.1.2) i followed the instructions on a in youtube video.
But when i was finished and tryied to boot up my phone nothing worked it only vibrates once and dosent even light the screen it only blinks red light and when i try flashboot mode it blinks a purple light.
When i try to connect it to my pc via usb it doesn't even recognize its a phone.
When i tryied to connect it to my pc to try and use Update service it blinks green light.
Sometimes when i connect my phone to my pc via usb i can see it in my device manager as an USB MTP device.
Also when i try to charge it blinks a green or a red light for a shortwhile, then the light stop blinking, and then does nothing.
Can someone help me please?
huh
karafliaris said:
I was trying to flash a new kernel in my phone, how ever i counld not boot in recovery mode, after some googling i found out that to enter the recovery mode i had to install an ics version (i curently have jb 4.1.2) i followed the instructions on a in youtube video.
But when i was finished and tryied to boot up my phone nothing worked it only vibrates once and dosent even light the screen it only blinks red light and when i try flashboot mode it blinks a purple light.
When i try to connect it to my pc via usb it doesn't even recognize its a phone.
When i tryied to connect it to my pc to try and use Update service it blinks green light.
Sometimes when i connect my phone to my pc via usb i can see it in my device manager as an USB MTP device.
Also when i try to charge it blinks a green or a red light for a shortwhile, then the light stop blinking, and then does nothing.
Can someone help me please?
Click to expand...
Click to collapse
i've been in the same situation with my xperia p, don't worry it can be fixed. download a tft file and flash it with flashtool.
there are many tutorials on xda how to do that. its all good man, don't worry.
rownz1337 said:
i've been in the same situation with my xperia p, don't worry it can be fixed. download a tft file and flash it with flashtool.
there are many tutorials on xda how to do that. its all good man, don't worry.
Click to expand...
Click to collapse
How to flash with flashtool if i can't connect my phone to my pc?
rownz1337 said:
i've been in the same situation with my xperia p, don't worry it can be fixed. download a tft file and flash it with flashtool.
there are many tutorials on xda how to do that. its all good man, don't worry.
Click to expand...
Click to collapse
Something is wrong, here is what it says in flashtool:
17/006/2014 00:06:19 - INFO - Device connected in flash mode
17/006/2014 00:06:20 - INFO - Start Flashing
17/006/2014 00:06:20 - INFO - Processing loader.sin
17/006/2014 00:06:20 - INFO - Checking header
17/006/2014 00:06:20 - ERROR - Processing of loader.sin finished with errors.
17/006/2014 00:06:20 - INFO - Ending flash session
17/006/2014 00:06:20 - ERROR -
17/006/2014 00:06:20 - ERROR - Error flashing. Aborted
17/006/2014 00:06:20 - INFO - Device connected in flash mode
17/006/2014 00:06:26 - INFO - Device disconnected
https://www.youtube.com/watch?v=FzOPuvnJGq4
i managed to flash my phone with the official 4.1.2 JB and it opened but the touchscreen didn't work.
and then i flashed it with an ICS rom but I EXCLUDED THE KENEL and opened my phone and, for a second appeared the sony logo, then nothing worked.
Just installed the 4.0.4 from the description of the youtube video and it works. thx man :laugh:
i have a problem with my superuser "can't find SU"
karafliaris said:
i have a problem with my superuser "can't find SU"
Click to expand...
Click to collapse
If you flash phone with stock rom you need root phone again
http://forum.xda-developers.com/showthread.php?t=1886460
shoT. said:
If you flash phone with stock rom you need root phone again
http://forum.xda-developers.com/showthread.php?t=1886460
Click to expand...
Click to collapse
I locked my bootloader > updated via pc companion to 4.1.2 > ulocked bootloader > rooted with the help of this link http://untitled-community.blogspot.gr/2014/02/how-to-root-and-install-cwm-recovery.html
thnx man