Related
Hi, I bricked my SE Xperia X10 Mini pro(u20i). I have root, recovery(CWM) and CyanoComb v1.4. When I rebooted phone, unlocked screen it shows errors about apps that they closed and than the phone rebooted. I can't do nothing, go to recovery is impossible. I tried flashtool but it's need to enable uknown sources an debugging but i can't go to system. SEUS didn't respond when i connect the phone with back button... HELP ME! Thanks
Edit: Now i see that the Flasher shows error after plugin phone in flash mode. HELP!
I looked into my magic glass bowl and saw that you did something and my future cards said you will have gotten some help. But not specifically.
I hope this disburdens yourself a bit.
Now after you cooled down and recognized that the information(s) you gave us is too unspecific you can go on to give more informations.
But first:
Doi you have the correct ftf file(s) for flashtool? Flashtool does not need to have anything enabled on your phone. Also SEUS should work. If not you bricked your phones hardware.
My guess is you did not correctly follow the instructions to use SEUS. Follow them step by step. They are well explained. Possibly you haven't the correct driver on your PC... But this did not tell me my glass bowl, this stupid thing. May you tell us what operating system you use? Maybe reinstalling SEUS will help. Do you have the actual VFewrson of SEUS? I guess SEUS is the better choice then flashtool for you. (both do the same but flashtool can flash other roms)
Good luck.
I have W7 and XP, i tried SEUS and Flashtool on both. I downloaded UK 2.1 ROM and than I did .ftf file. After i enter flash mode in Flashtool it say: Error Flashin Aborted, Now unplug your device and power it on, turn on Uknown sources and Debugging.
In SEUS, when it ask to turn in flash mode, I do it but SEUS didn't recognize my device.
26/007/2011 21:07:38 - INFO - Preparing files for flashing
26/007/2011 21:07:45 - INFO - Searching Xperia....
26/007/2011 21:07:46 - ERROR - Please plug you device in flash mode
26/007/2011 21:07:47 - INFO - Searching Xperia....
26/007/2011 21:07:47 - ERROR - Please plug you device in flash mode
26/007/2011 21:07:48 - INFO - Searching Xperia....
26/007/2011 21:07:49 - ERROR - Please plug you device in flash mode
26/007/2011 21:07:50 - INFO - Searching Xperia....
26/007/2011 21:07:50 - ERROR - Please plug you device in flash mode
26/007/2011 21:07:51 - INFO - Searching Xperia....
26/007/2011 21:07:51 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&F9CB627&0&1
26/007/2011 21:07:51 - INFO - Start Flashing
26/007/2011 21:07:51 - INFO - VER="R8A026";DATE="20100412";TIME="11:41:00";
26/007/2011 21:07:55 - ERROR - Error flashing. Aborted
26/007/2011 21:07:55 - INFO - Now unplug the device and power it on
26/007/2011 21:07:55 - INFO - Then go to application settings
26/007/2011 21:07:55 - INFO - turn on Unknown Sources and Debugging
@wOrHeR SvK: i had the same behaviour with Flashtool, so i powered off the device, powered on in flash mode and reflashed with FlashTool, after that it was flashed fine (don't follow the ending message to activate unknown sources and other crap, you don't need it... focus only at flash stage, that's what you need).
By the way Snoopo is right, flashing with SEUS (open application and search for "repair your phone" or something like that) does the job in every circumstance but hardware failure.
Good luck!
nothing... I turned on in flash mode and than click flash in Flashtool. Same problem... SEUS can't recognize... I Don't know why but before it was OK
tommorow i will go to my friend and try it at his PC
redownload the ftf file... did you possibly load a mini (u10) file instead a x10 mini pro (u20)?
did you use the right version of Flashtool? The one from Androxyde/Bin4ry [http://forum.xda-developers.com/showthread.php?t=920746]?
Use SEUS to reinstall your ROM
yeah, tried 0.2.8 and 0.2.9.1. SEUS still not working...
Correct Flashfiles are here: http://forum.xda-developers.com/showthread.php?t=826455
And SEUS also should work. What are the error messages? Make sure your phone is really OFF, start SEUS choose "x10 mini pro" (NOT "mini pro" without "x10" - this is a coplete new model and not really released yet) and go through the process until it says you have to connect your phone and do it exaclty like it is explained: hold the back-button while you are connecting your phone hold it down as long as it is looking for your phone when it starts flashing you can release the button. there should be the green indicator LED showed while the restore is running.
The Flashtool ones you pasted look like the flashmode is started successfully but it is possibly a wrong flash file. So try the correct one(s) (rename the .rar file downloaded from page above into .ftf)
otherwise you really bricked your boot partition and can try if SE wants to rescue your phone or if it says that your warranty is void...
SEUS still nothing, tried everything... Flashtool: when i first turn phone on to flash mode and than click flash in flashtool, it say Start Flashing and than the Error but when it says the error the green led is off and the phone is going to start... any idea ?
also SEUS isn't showing any errors, just say that i have to connect phone in flash mode...
I can boot to system but in system it showing errors about apps thah must close.... That isn't bricked boot patriton i think.
wOrHeR SvK said:
SEUS still nothing, tried everything... Flashtool: when i first turn phone on to flash mode and than click flash in flashtool, it say Start Flashing and than the Error but when it says the error the green led is off and the phone is going to start... any idea ?
also SEUS isn't showing any errors, just say that i have to connect phone in flash mode...
I can boot to system but in system it showing errors about apps thah must close.... That isn't bricked boot patriton i think.
Click to expand...
Click to collapse
You have DEFINATLY got the device drivers?
Dev area
should be moved, but noobs dont read the stickies
I have installed drivers with ggsetup
I asked ide Dev area beacause this area read more people than Question area
wOrHeR SvK said:
I have installed drivers with ggsetup
I asked ide Dev area beacause this area read more people than Question area
Click to expand...
Click to collapse
not for brick questiions ! The ansers always the same to noobs seus is not pc companion
i know what is SEUS and what is PC Companion I'm no n00b but SEUS and FlashTool is not working for me, i try it on another PC, with another USB cable...
wOrHeR SvK said:
I have installed drivers with ggsetup
I asked ide Dev area beacause this area read more people than Question area
Click to expand...
Click to collapse
its driver problem
ggsetup driver wont work with flash tool or sony update
remove driver then install seus
download seus from here http://www.sonyericsson.com/cws/support/mobilephones/downloads/subject/updateservice/xperiax10minipro?cc=us&lc=en
its Update Service not pc companion
it will work 100 % if you have right driver and not failed phone hardware
USB Driver for x10mini
download USB driver from here
http://developer.sonyericsson.com/wportal/devworld/downloads/download/dw-x10minidrivers?cc=gb&lc=en
wOrHeR SvK said:
i know what is SEUS and what is PC Companion I'm no n00b but SEUS and FlashTool is not working for me, i try it on another PC, with another USB cable...
Click to expand...
Click to collapse
Hmmmmmmm.
hi, i have xperia u (bootloader unlocked).everything was working fine untill i format my laptop.but now everytime i flash my device or i install different roms on my phone ,flashtool needs drivers for my device everytime. after installing drivers it was working ok(flashmode and fastbbot) but now i can't enter my XU in fastboot mode.flashtool says it needs drivers to be installed but i have already installed them...any solution?
one more thing my XU touch screen not working well, it works some times but some times it does not responds at all...i have checked the touchscreen patterns and i think its not a hardware issue( as i don't have any dead spots on the screen).....any solution?
and i have noticed that whenever i go to mounts and storage in cwm it shows the system unmounted ....is that a problem?
plzzzz help me..
johnybravo.1981 said:
hi, i have xperia u (bootloader unlocked).everything was working fine untill i format my laptop.but now everytime i flash my device or i install different roms on my phone ,flashtool needs drivers for my device everytime. after installing drivers it was working ok(flashmode and fastbbot) but now i can't enter my XU in fastboot mode.flashtool says it needs drivers to be installed but i have already installed them...any solution?
one more thing my XU touch screen not working well, it works some times but some times it does not responds at all...i have checked the touchscreen patterns and i think its not a hardware issue( as i don't have any dead spots on the screen).....any solution?
and i have noticed that whenever i go to mounts and storage in cwm it shows the system unmounted ....is that a problem?
plzzzz help me..
Click to expand...
Click to collapse
Can you please provide your ROM details??
ROM version and Kernel
AKA#1 said:
Can you please provide your ROM details??
ROM version and Kernel
Click to expand...
Click to collapse
i am on unofficial stock jb.a.100.before this i tried it on ics firmwares as well as gb...
touch is not much responsive on any of these firmwares.
Are you on Windows 7 or 8?
AKA#1 said:
Are you on Windows 7 or 8?
Click to expand...
Click to collapse
windows 7...actually the device is not recognized(when the driver installation starts it says unknown device).
here is flashtool log
29/031/2013 09:31:11 - INFO - <- This level is successfully initialized
29/031/2013 09:31:11 - INFO - Flashtool Version 0.9.8.0 built on 2012-10-01 19:35:32
29/031/2013 09:31:11 - INFO - You can drag and drop ftf files here to start flashing them
29/031/2013 09:31:16 - INFO - Device connected with USB debugging on
29/031/2013 09:31:17 - INFO - Connected device : ST25
29/031/2013 09:31:17 - INFO - Installed version of busybox : N/A
29/031/2013 09:31:17 - INFO - Android version : 4.0.4 / kernel version : 3.0.8+ / Build number : 6.1.1.B.1.10
29/031/2013 09:31:34 - INFO - Device disconnected
29/032/2013 09:32:12 - ERROR - Drivers need to be installed for connected device.
29/032/2013 09:32:12 - ERROR - You can find them in the drivers folder of Flashtool.
29/032/2013 09:32:16 - INFO - Device disconnected
29/033/2013 09:33:10 - ERROR - Drivers need to be installed for connected device.
29/033/2013 09:33:10 - ERROR - You can find them in the drivers folder of Flashtool.
29/033/2013 09:33:13 - INFO - Device disconnected
29/038/2013 09:38:36 - INFO - Device connected with USB debugging on
29/038/2013 09:38:37 - INFO - Connected device : ST25
29/038/2013 09:38:37 - INFO - Installed version of busybox : N/A
29/038/2013 09:38:37 - INFO - Android version : 4.0.4 / kernel version : 3.0.8+ / Build number : 6.1.1.B.1.10
29/039/2013 09:39:02 - INFO - Device disconnected
29/039/2013 09:39:04 - ERROR - Drivers need to be installed for connected device.
29/039/2013 09:39:04 - ERROR - You can find them in the drivers folder of Flashtool.
29/039/2013 09:39:45 - INFO - Device disconnected
29/039/2013 09:39:59 - ERROR - Drivers need to be installed for connected device.
29/039/2013 09:39:59 - ERROR - You can find them in the drivers folder of Flashtool.
29/040/2013 09:40:02 - INFO - Device disconnected
is there any solution?
johnybravo.1981 said:
is there any solution?
Click to expand...
Click to collapse
Have you tried reinstalling the drivers?
ChikeD said:
Have you tried reinstalling the drivers?
Click to expand...
Click to collapse
tried many times but no success... windows says 'unidentified device'..
johnybravo.1981 said:
tried many times but no success... windows says 'unidentified device'..
Click to expand...
Click to collapse
Installing the drivers that come with flashtool i mean.
ChikeD said:
Installing the drivers that come with flashtool i mean.
Click to expand...
Click to collapse
yes of course i did...
johnybravo.1981 said:
yes of course i did...
Click to expand...
Click to collapse
And PCC or SUS have you tried intslling them?
Install the driver of fast boot from flashtool.. When enter into the fastboot mod if any driver installation wizard comes then go for advance installation.. Then go for available driver probably the last option.. Then it will show the s1 fastboot driver. select it.. Then try to connect in fastboot mod it will work.I was facing this problem.. But I solved it.. Bt I was on xp.. So try it.. It may work
Sent from my ST25i using xda premium
ChikeD said:
And PCC or SUS have you tried intslling them?
Click to expand...
Click to collapse
yes
bibhu059 said:
Install the driver of fast boot from flashtool.. When enter into the fastboot mod if any driver installation wizard comes then go for advance installation.. Then go for available driver probably the last option.. Then it will show the s1 fastboot driver. select it.. Then try to connect in fastboot mod it will work.I was facing this problem.. But I solved it.. Bt I was on xp.. So try it.. It may work
Sent from my ST25i using xda premium
Click to expand...
Click to collapse
already gave that a try... my pc says "unidentified device" when the driver installation starts.. ADB drivers as well as s1 fastboot drivers are installed. but everytime flashtool says drivers need to be installed .
johnybravo.1981 said:
already gave that a try... my pc says "unidentified device" when the driver installation starts.. ADB drivers as well as s1 fastboot drivers are installed. but everytime flashtool says drivers need to be installed .
Click to expand...
Click to collapse
better try it in xp
bibhu059 said:
better try it in xp
Click to expand...
Click to collapse
i can't..any other solution
sry i cant help you bt it is not a major problem...in xp it will be solved within 1min..better try to install the drivers again from falshtool..good luck
johnybravo.1981 said:
i can't..any other solution
Click to expand...
Click to collapse
Try on another computer.
I had drivers problem with Windows 7 at first and indeed on xp I did not, but It was different driver not the one from flashtool.
I can't remember if it was flashtool or PC Companion that fixed it but they work ever since so far.
ChikeD said:
Try on another computer.
I had drivers problem with Windows 7 at first and indeed on xp I did not, but It was different driver not the one from flashtool.
I can't remember if it was flashtool or PC Companion that fixed it but they work ever since so far.
Click to expand...
Click to collapse
ok, will give that a try..thanks
ChikeD said:
Try on another computer.
I had drivers problem with Windows 7 at first and indeed on xp I did not, but It was different driver not the one from flashtool.
I can't remember if it was flashtool or PC Companion that fixed it but they work ever since so far.
Click to expand...
Click to collapse
thanks...solved using the other pc...
Hello everybody,
My Xperia Mini ST15i (with 2.3.4 ROM, & 4.0.2.a.0.42 Build Number) can't turn on properly.
Just stuck at 'Sony Ericsson' (before the logo).
I tried to press power + volume down, but it wont open the CWM.
Then I want to flash with the latest flashtool 0.9.xx, but the log status was:
29/044/2013 21:44:06 - INFO - <- This level is successfully initialized
29/044/2013 21:44:06 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
29/044/2013 21:44:35 - INFO - Device disconnected
29/046/2013 21:46:03 - INFO - Device connected with USB debugging off
29/046/2013 21:46:03 - INFO - For 2011 devices line, be sure you are not in MTP mode
So what should I do for this problem?
Even I can't turn on the USB debugging and switch to MSC mode because the device stuck at 'Sony Ericsson'.
Everybody please help me
I can't do this without your kindness and your guide.
Thanks a lot. I hope you all can reply my mesage.
kesuma27 said:
Hello everybody,
My Xperia Mini ST15i (with 2.3.4 ROM, & 4.0.2.a.0.42 Build Number) can't turn on properly.
Just stuck at 'Sony Ericsson' (before the logo).
I tried to press power + volume down, but it wont open the CWM.
Then I want to flash with the latest flashtool 0.9.xx, but the log status was:
29/044/2013 21:44:06 - INFO - <- This level is successfully initialized
29/044/2013 21:44:06 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
29/044/2013 21:44:35 - INFO - Device disconnected
29/046/2013 21:46:03 - INFO - Device connected with USB debugging off
29/046/2013 21:46:03 - INFO - For 2011 devices line, be sure you are not in MTP mode
So what should I do for this problem?
Even I can't turn on the USB debugging and switch to MSC mode because the device stuck at 'Sony Ericsson'.
Everybody please help me
I can't do this without your kindness and your guide.
Thanks a lot. I hope you all can reply my mesage.
Click to expand...
Click to collapse
try to flash stock rom
http://forum.xda-developers.com/showthread.php?p=43897224
You need to be in flashmode to flash something
This means take out the battery, wait a few seconds, insert it again, hold volume down and while holding volume down connect the phone to your pc. The green led will indicate you are in flashmode.
Then you click in flashtool on the flash - flashmode - select the .ftf for your device (mini, st15, smultron) and click OK.
When it has finished flashing you should be able to boot up your phone
Or even better and easier would be the repair option in PC Companion or Sony Update Service :good:
Sent from my Nexus 4 running Android 4.3
mihahn said:
You need to be in flashmode to flash something
This means take out the battery, wait a few seconds, insert it again, hold volume down and while holding volume down connect the phone to your pc. The green led will indicate you are in flashmode.
Then you click in flashtool on the flash - flashmode - select the .ftf for your device (mini, st15, smultron) and click OK.
When it has finished flashing you should be able to boot up your phone
Or even better and easier would be the repair option in PC Companion or Sony Update Service :good:
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
Okay mihahn , i've tried to flash in flashmode with flashtool
I've downloaded the Stock Firmware 4.0.2.a.0.42 and put that .ftf to folder: /firmwares
But when the device connected to USB PC, the log status was:
Need to switch to MSC Mode
Need to switch to USB debugging ON
Can I do this flashing without switch to ON USB debug & switch to MSC Mode?
I still confuse
And the step to press volume down when connecting to PC doesn't available
Plase help me, thanks a lot
kesuma27 said:
Okay mihahn , i've tried to flash in flashmode with flashtool
I've downloaded the Stock Firmware 4.0.2.a.0.42 and put that .ftf to folder: /firmwares
But when the device connected to USB PC, the log status was:
Need to switch to MSC Mode
Need to switch to USB debugging ON
Can I do this flashing without switch to ON USB debug & switch to MSC Mode?
I still confuse
And the step to press volume down when connecting to PC doesn't available
Plase help me, thanks a lot
Click to expand...
Click to collapse
You don't need to enable anything
In flashtool do what I told you, select the ftf etc and click ok. There'll be a windows that tells you to connect the device in flashmode.
Now you take the battery out of your phone, wait a few secs, insert it again and now just press volume down and connect it via usb to your PC. Don't power it on! Just press volume down while it's turned off and connect the usb
It will automatically start flashing and when it's finished, unplug your device and start it. If it won't start flashing because it doesn't recognize your device, go to the flashtool installation folder - drivers and install all drivers for all modes/devices again. Then try to flash the firmware like I told you :good:
Sent from my Nexus 4 running Android 4.3
mihahn said:
You don't need to enable anything
In flashtool do what I told you, select the ftf etc and click ok. There'll be a windows that tells you to connect the device in flashmode.
Now you take the battery out of your phone, wait a few secs, insert it again and now just press volume down and connect it via usb to your PC. Don't power it on! Just press volume down while it's turned off and connect the usb
It will automatically start flashing and when it's finished, unplug your device and start it. If it won't start flashing because it doesn't recognize your device, go to the flashtool installation folder - drivers and install all drivers for all modes/devices again. Then try to flash the firmware like I told you :good:
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
Okay, I try now.
I'll report to you the log later. THX before mihahn
Thanks a lot! mihahn, tips from you was so amazingly MAGIC!
It Works! I just thanked you.
Once again, thank you.
kesuma27 said:
Okay, I try now.
I'll report to you the log later. THX before mihahn
Thanks a lot! mihahn, tips from you was so amazingly MAGIC!
It Works! I just thanked you.
Once again, thank you.
Click to expand...
Click to collapse
No problem, for any further issues just ask again and I'm sure somebody will help you
Sent from my Nexus 4 running Android 4.3
in order to unlock the bootloader ... I found some problems
impossible to keep the fastboot mode!
after turned off the phone, pressed the button up, connect the cable to the PC at the same time => The blue LED lights but after 2 seconds it will turn off and the Sony logo appears
I tried again quite a few times but still the same result
tried on rom costums and also the stock jb .100
any help is welcome
thank you
dastane said:
in order to unlock the bootloader ... I found some problems
impossible to keep the fastboot mode!
after turned off the phone, pressed the button up, connect the cable to the PC at the same time => The blue LED lights but after 2 seconds it will turn off and the Sony logo appears
I tried again quite a few times but still the same result
tried on rom costums and also the stock jb .100
any help is welcome
thank you
Click to expand...
Click to collapse
Fastboot drivers installed(from flash tool or ither)?
What is your Windows version?
EDIT: for IDK what reason it's not recommended that you post your IMEI.... erase it
for the drivers, i install them from flashtool and abd installer!! all work fine... ( i supose :/ )
win 7 x64
Flashtool 0.9.11
i tryed also the flashtool method but it repport that the drivers are not installed
29/052/2013 12:52:41 - ERROR - Drivers need to be installed for connected device.
29/052/2013 12:52:41 - ERROR - You can find them in the drivers folder of Flashtool.
dastane said:
for the drivers, i install them from flashtool and abd installer!! all work fine... ( i supose :/ )
win 7 x64
Flashtool 0.9.11
i tryed also the flashtool method but it repport that the drivers are not installed
29/052/2013 12:52:41 - ERROR - Drivers need to be installed for connected device.
29/052/2013 12:52:41 - ERROR - You can find them in the drivers folder of Flashtool.
Click to expand...
Click to collapse
Did you install fastboot and fash mode driver from flashtool(at the bottom of the list)
Before you try to unlock or flash, just leave flashtoll open and connect in fastboot mode, if all is ok it will show in dlashtool window.
i think that is the worong!!! " install fastboot and fash mode driver from flashtool"
now all is fine!!! i'm unlocked
thank you very much
dastane said:
in order to unlock the bootloader ... I found some problems
impossible to keep the fastboot mode!
after turned off the phone, pressed the button up, connect the cable to the PC at the same time => The blue LED lights but after 2 seconds it will turn off and the Sony logo appears
I tried again quite a few times but still the same result
tried on rom costums and also the stock jb .100
any help is welcome
thank you
Click to expand...
Click to collapse
I have no issue at all... Just follow the instruction on how to install and make sure you have install the driver as well... I have problem before but that solo on my mistake... supposed vol + i press vol -... Hope this help u.
thank you Kvnlim!!!
the probleme is solved!
i forgete to " install fastboot and fash mode driver from flashtool"
dastane said:
thank you Kvnlim!!!
the probleme is solved!
i forgete to " install fastboot and fash mode driver from flashtool"
Click to expand...
Click to collapse
Glad it help you
1 install flashtool's dirvers.
2 power off the phone
3 press + first
4 then connect it to PC
5 first time it may fail, after PC load the dirvers completly it will be work!
I flashed the wrong rom on my Xperia Z2, I tried fixing it by flashing tft file, but I couldn't even get the device into flashmode (Power + Vol up), It just never vibrates, when I put it in the charger it just keeps blinking red.
What's the proper fix for this? and is this a soft-brick or hard-brick? Please help.
RevolverForce said:
I flashed the wrong rom on my Xperia Z2, I tried fixing it by flashing tft file, but I couldn't even get the device into flashmode (Power + Vol up), It just never vibrates, when I put it in the charger it just keeps blinking red.
What's the proper fix for this? and is this a soft-brick or hard-brick? Please help.
Click to expand...
Click to collapse
Flashmode is not Power button + Volume up. But...
Connect USB to ur computer
Then Hold the Volume Down key on your phone while u connect the USB Cable to the phone.
If you successfully get to flashmode, then u can flash an FTF file for ur phone. (This will also wipe internal sd files if you don't untick 'data' under wipes) Then again, phone might not boot properly if you don't wipe as u said something about custom ROM.
OR Follow these steps I found on Sony website
1. Download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
and install it on your PC.
2. Install and open PC Companion then select Support Zone.
3. Phone Software Update.
4. Start.
5. Repair Phone
6. Continue
7. Accept data removal
8. Next
9. Wait for prepare
10. Select Phone
11. Follow the connection steps
Tried using flashtool with Vol down buut
18/058/2014 23:58:26 - ERROR - Drivers need to be installed for connected device.
18/058/2014 23:58:26 - ERROR - You can find them in the drivers folder of Flashtool.
I'm sure that I have the drivers installed as I tried earlier today to unlock the bootloader through flashtool (which didn't really work out) and it recognized the device just fine.
right now it doesn't even show the Sony logo..I'll try PC Companion method in seconds..
EditC Companion is asking me to make sure that the battery level is above %80, when I was flashing the new rom, the battery level was around %50, should I care about this, or is it just an extra precaution? because I don't really see a way for me to know the battery level.
RevolverForce said:
Tried using flashtool with Vol down buut
18/058/2014 23:58:26 - ERROR - Drivers need to be installed for connected device.
18/058/2014 23:58:26 - ERROR - You can find them in the drivers folder of Flashtool.
I'm sure that I have the drivers installed as I tried earlier today to unlock the bootloader through flashtool (which didn't really work out) and it recognized the device just fine.
right now it doesn't even show the Sony logo..I'll try PC Companion method in seconds..
EditC Companion is asking me to make sure that the battery level is above %80, when I was flashing the new rom, the battery level was around %50, should I care about this, or is it just an extra precaution? because I don't really see a way for me to know the battery level.
Click to expand...
Click to collapse
I'm sure 50% is enough to install through PC Companion unless ur battery is bad.
And do you by anymeans use windows 8? If you do, Did you disable driver signature while installing Flashmode, Fastboot and Z2 drivers from the C:\Flashtool\drivers folder, or where ever u installed flashtool to.
I believe I didn't disable driver signature, I connected the device to a different usb port too just to be sure, my OS is windows 8.1.
PC Companion is updating the phone right now, I'll see how it turns out and report back to you, thanks.
Edit:It worked, my phone is alive, thank you, stanley <3
RevolverForce said:
I believe I didn't disable driver signature, I connected the device to a different usb port too just to be sure, my OS is windows 8.1.
PC Companion is updating the phone right now, I'll see how it turns out and report back to you, thanks.
Edit:It worked, my phone is alive, thank you, stanley <3
Click to expand...
Click to collapse
There's no keeping that Bad Boy down! Cheers mate!